6921 while on hold cant take new call

Hello,
I have a CME router 15.0<1r>M15
while calling from a 6921 phone, if i put the call on hold and i press the new call button i get : "Unable to create a call; the maximum number of calls for this line has been reached."
the config:
ephone-dn 26 dual-line
number 1501
ephone 26
lpcor type local
lpcor incoming PSTNTrunk
mac-address 34A8.4E61.76D9
max-calls-per-button 2
username "***" password 12345
paging-dn 50
type 6921
button 1:26
pin 12345
The 6921 phones have the latest firmwares 9.3.1.3
I have 7962 phones, when i put a call on hold ,new calls are working fine.

Hello,
I have this problem too. I have done tests and the issue is not associated to a firmware version. I have used serveral firmware for the phone a serveral version for CUCME (8.6 and 9.1). If you try to do a transfer you can make a new call. The issue is only associated to hold feature. I think that the phone by default set the maximun call per line to 1 but there is no way to set this value greater that one. The command "max-calls-per-buttton" has no effect. I have also reproduced the issue using sip firmware.
Regards.

Similar Messages

My iphone 5C touch wont works some times , mostly during incoming call i cant take the call or some times password inputs wont works.

My iphone 5C touch wont works some times , mostly during incoming call i cant take the call or some times password inputs wont works.

Greetings naseem770,
It sounds as if you are having an intermittent issue with touchscreen response on your iPhone. I would suggest that you troubleshoot using the steps in this article -
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

Cant Hold and Place Another Call on BB 8120 pls Help

Dear All,
I have a BB pearl 8120 and i noticed that when ever i make a call, place it on hold and then simultaneuosly make another call, i dont hear it ring and cant seem to connect with my new caller while it shows me connected on the screen.In actual fact it actually rings at the other end and its actually being picked while he or she cant hear me.
This also happens when i place calls on conference, i notice that im able to connect the parties involved but wont be able participate in the conference myself.
Can anybody pls help?

Hi,
I am facing the same problem with my Blackberry Pearl 8120 mobile.
I hope RIM will resolve this in the next software update for mobile phone.
I found one workaround for this. Call the second person, put them into a conference at this time they can talk to each other. Now press menu and hold the call then resume the call. Mostly you will be in proper conference (all three).
I also hope the experts in the forum suggests better solution
Regards,
Rajesh

Unable to make a new call when she has an incoming call on hold

Cisco ip phone 6945 with dual-line dn configuration
when puting an incoming call on hold and trying to make a new call, she can not succeed.
Any suggestion to make it work,thanks

Pretty sure you are going to need an additional DN to make another call while having one on hold. Even though the calls don't appear to go over the second DN, you have to have as many "Lines" on the phone as calls active. the call on-hold, is still considered an active call on that device.

I have an iphone 4 that I recently upgraded to IOS 7, and now I cant drag music to it. It says "preparing to update" eternally. Weird thing is... I have an iphone 3s that is IOS 6, and it takes new music all day. arg.

I have an iphone 4 that I recently upgraded to IOS 7, and now I cant drag music to it. It says "preparing to update" eternally. Weird thing is... I have an iphone 3s that is IOS 6, and it takes new music all day. arg.
I have tried direct connecting the iphone 4, via wifi, everything. I hate itunes with a passion, but it seems to be a necessary evil. I dont know why I would have no trouble with my iphone 3. I am using the same technique for both phones. Find the music I want in the library and drag it to the iphone. Works on IOS 6, not IOS 7.
WHat else should I try?

Hi jeffmbellucci,
If you are having issues dragging music to your iPhone 4 after a recent upgrade to iOS 7, you may want to verify that the phone is still set to "Manually manage music and videos." You may find the following article helpful:
Apple Support: Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
Regards,
- Brenden

Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?

Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?

downloaded new version but I keep getting error message with download.
What does the error message say, andrea? (Precise text, please.)

My touchscreen blacks out while on a call so I can't multitask. If I am on a call and a new call comes in, I can't see who is calling or even think of answering because the screen is blacked out.

My touchscreen blacks out while on a call so I can't multitask. If I am on a call and a new call comes in, I can't see who is calling or even think of answering because the screen is blacked out.

Thank you so very much! My husband is in Afghanistan and calls at different times. If I am on a call and can't answer him it could be days before I hear from him again. I never thought to just restart my phone! Duh...this is my first smartphone so I am learning. All day people were calling while I was on the phone but I couldn't answer. Thank GOD none of the calls were my husband because it would break my heart if I missed his call. Thank you again and GOD bless you! Ashley Combahee

HT3529 my iphone broke, is there anyway to see who is texting me or calling me while i wait for my new phone?

my iphone broke, is there anyway to see who is texting me or calling me while i wait for my new phone?

Through iCloud, a user is able to share (and sync) all content between iOS devices (and Macs), including messages.
• Syncing between iOS devices
If you have an iPad or iPod touch, activating iCloud in those devices with the same iCloud account of your iPhone will allow the text messages you initially recieve from your phone to be delivered to the additional devices.
➞ Limitations
The caller must be an iOS device (iPhone, iPad, iPod Touch) user.
The caller must be sending the text to your iCloud account (e-mail address), not your phone number.
• Syncing to your Mac
If you have a Mac (iMac, Macbook, Mac mini, etc), 'Messages Beta for OS X' will allow your computer to act as a text messaging machine, as well ― just like your iPhone.
➞ Limitations
The caller must be an iOS device (iPhone, iPad, iPod Touch) user.
The caller must be sending the text to your iCloud account (e-mail address), not your phone number.
Unfortunately, phone calls, which all of the other iOS devices, except iPhones, don't have, cannot be received.

Can I take a call on my iphone 4S while it is charging,tech specs would be helpful

Can I take a call on my iphone 4S while it is charging,tech specs would be helpful

Yes you can. Also, you can view the User Guide here http://manuals.info.apple.com/en_US/iphone_user_guide.pdf and you can go to http://www.apple.com/iphone/iphone-4s/specs.html

TS4079 siri keeps saying she cant take any request right now please try again in a little while she was working fine when i first talked to her

siri keeps saying she cant take any request right now please try again in a little while she was working fine when i first talked to her please help

You may want to try and reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing, Wall Paper, Sound etc will be reset

Cant perform audio call to internalpbx while Unified VT Advantage running

Help me pls,
i just installed Unified Video Advantage and everything fine except i cant perform audio calls to internal pbx numbers while Unified Video Advatage running, for example to number 3119, at the same time I can perform calls to ip phones. If I close the Video Adavantage Utility everything getting fine. Symptoms: After I pressed last the number's digit the call is ending without any audio signals or busy sugnal. Phone display also immidiately returns to idle state.
Thanks, in advance

To resolve this issue, configure the system clocking correctly.
The clocking configuration differs depending on the platform, as shown in these examples:
* For the Cisco 7200VXR series router, issue the frame-clock-select command.
* For the Cisco 2600 or 3700 series routers with an Advanced Integration Module (AIM), perform these steps:
1. Issue the clock source line command under the appropriate controller.
For the Voice and WAN Interface Card (VWIC) controller configuration, the default for the clock source command is clock source line. However, the recovered clock is not used to drive the AIM. Therefore, this configuration is not sufficient to resolve the clock slip problem.
2. To allow the router to recover the clock from the E1 and T1 VWIC and pass it across the backplane to the AIM, issue the network-clock-participate command in global configuration mode.
If multiple VWICS are installed, the command must be appropriately repeated.
3. To allow the AIMs in a Cisco 3700 or 2691 series router to participate in system clocking, issue the network-clock-participate command for each AIM.
4. Specify the network clock source and priority. Issue the network-clock-select command in global configuration mode.

Cant take calls

When someone calls me IT happens often that the screen rests dark, no possibility to take the call...but IT rings

Is it possible this is just the screensaver/lockscreen kicking in?
If you swipe up from the bottom does the screen come back on?
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

Nokia x6 shutting down when take/recieve call

Hello,
my Nokia x6, 16 gb (aprox. 3 months old) have this annoying issue. The phone ocasionally turns off when i call, or recieve a call (i hear a click and phone turns off). I have to manually start it again. Sometimes the problem persists for a few next calls, while sometimes it doesn't. Anyways,i usually let it be for a day or two, and use my old phone. But this is getting really frustrating now, after all, i bought it to use it!
I have tried the hard reset, the factory reset. I took it to the official repair shop here in my country, where i demanded they take away the **bleep** vodafone, preventing me to update further than v20 firmware.
The repair shop gave it back, saying there are no more problems. Im taking a guess even they did those soft/hard resets. I have the latest firmware (v30) and yes the phone does work much faster, but just now i did get another shutdown when having a conversation ! I even uninstalled pretty much all not needed apps (facebook, youtube, accuweather, games, ...) on the new firmware.
I cannot have such a unpredictable phone, especially when i am working and have to take important calls. Imagine how it is, when the phone dies in the middle of important conversation with the boss/costumer. I need a RELIABLE phone!
So i kindly ask you people, did you have similar occurances?
If yes, how did you fix it?
What do you think, it is a software or a hardware issue?
The problem did happen even at day 1, but i thought it was an application i installed back then, that did this problems.
Any reply's would be appreciated!

you should send it back and ask for a replacement explain to nokia its been already there
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

My iPhone 4s is stuck in AirPlay screen. It won't shut off, software is current, it rings but the screen doesn't change so I can't take any calls. What do I do?

My iPhone 4s is stuck in AirPlay screen. It won't shut off, software is current, it rings but the screen doesn't change so I can't take any calls. What do I do?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
If you have problems restoring (if that is necessary) the iPhone
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPhone fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

For existing data in BI, client need to take a call to park the same from s

hi,
friends,
For existing data in BI, client need to take a call to park the same from safety point view by copying the existing ODS
is it possible?if it is possible give me details.
thanks&regurds
sivaji

hi,
well when you copy an ODS only the structure is copied. to load the data you might need to create transformation and DTp to load data in the new ODS.
You need to load data manually. Copying the ODS will only copy the structure.
Regds,
Shashank

6921 while on hold cant take new call

Similar Messages

Maybe you are looking for