694D Pro2(-IR?) How big HD does this support?

I got a 694D Pro2 motherboard, and I wounder how big hard disk this supports. I thinking about a western digital 8mb cach 120GB, 160GB or 200GB disk.
I also wounder why I got a message that says:
"WARNING! CPU has been changed"
"Please Enter CPU Speed CMOS Setup and Remember to Save Before Exit!"
This message has always comed up since I bought the motherboard, and if i fix it in the bios, it would be the same after I power off my computer. The computer works fine still with this message, but I havto press F1 every time I sould boot my computer.
Odbjørn Bakke
Norway

Here's your answer to the HDD support Qns, you've to go into HDD Support link in this page.
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=84
Next, the speed indication for the CPU is being changed in Softmenu BIOS, but don't worry, it will not do damage to your system. All you've to do is to know what CPU you are running on now, i.e, Dual Intel Pentium III 800 CPU @ 100MHz, then you've to selected this indication from the list in your BIOS. I've had encounter this similar problem on my friend's old P3 running on his ASUS mobo and it's only indication error.
All the Best... :D!!!

Similar Messages

My husband has retrieved emails from my exchange email account. I deleted them from the trash bin. How is he doing this?

My husband has retrieved emails from my exchange email account. I deleted them from the trash bin. How is he doing this?

shannon284 wrote:
My husband has retrieved emails from my exchange email account. I deleted them from the trash bin. How is he doing this?
OK, let's come back to the original issue; how are deleted messages retrievable?
First, is the account set up as an Exchange account or a POP account? I'll assume it's Exchange. If it were POP the answer is obvious.
If it's an Exchange account are you deleting the messages from the phone or from some other computer? If you are deleting them from another computer they will not be removed from the Trash folder on the phone until the phone next syncs AND the Trash folder is opened. But this will take time. You can force the Trash folder to sync in near real time by going into Settings/Mail,Contacts,Calendars, tap on the Exchange account, tap on Mail Folders to Push and check "Deleted Items". Note that doing this will result in increased data usage and reduced battery life.
If I haven't described the situation tell me what assumptions I made that are incorrect.

How many users does HFM support?

Hi,
how many users does HFM support(Maximum)? and why we are choose HFM compare to Hyperion enterprise?
thanks
Edited by: user10919054 on May 18, 2009 3:07 AM

There is no limit, as long as you pay for the licenses and make sure you have a robust system to support user connectivity and demand.
Hyperion Enterprise is the previous Consolidation tool most commonly used by many companies. Think of HFM as the "New Generation"....

From iPad with iOS 7.1 to a HP Officejet 6500 E709n Series printer does this support airPrint

From iPad with iOS 7.1
to a HP Officejet 6500 E709n Series printer
does this support airPrint?

My error.
I did not see the printer listed on the Airprint list and then added the other.
I will edit accordinging.
Apologies.
Click the Kudos Thumbs-Up!
It is a nice way to say “Thank You" for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

How many bookmarks does safari support?

How many bookmarks does safari support? I need to save a lot of articles for an exam.can I trust safari to save around 500 bookmarks?

I have about 20 bookmark folders and in those twenty are about 30 on average, so say about 600. But I think there is no restriction, it may well be a million.

How many Calendars does iCal support?

How many Calendars does iCal support?

Unfortunately I have been made very aware of a limit.. and that limit appears to be 5 !! According to iCal (at least on ALL my Mac's) any more, then the Calendars do not appear.
However, I do sync my iCal with Google.. google shows ALL Calendars and each calendar in google is configured to be shown in what ever host app will show them. But only 5 out of the 6 will show. i.e. Im pretty sure the problem is with iCA and NOT Google.
Note: iCal on my Computer MBP is fine... its iCal on my iPhone Im referring to.

HR triggers in GRC CUP.. How and when does this work

Dear Experts,
I would really appreciate if some one could shed some light on how HR triggers work in GRC CUP ?
When does this get triggered ?
Is it when the the user master record is saved or when the Info type 105 is linked ? Are there any pre-requisities that should be taken care from the Hr perspective so that I can set the expectations accordignly with HR team ?
P.S I already went through the article " How to configure HR triggers with GRC CUP ?
Thanks
Kumar

I configured HR trigger rule for infotype 0000 & subtype Z1,field MASSN with value equal to 01 to trigger new hire...i don't see any data being populated into table /VIRSA/INT_TRIG & ?VIRSA/DATA.
I could see the rule in table /VIRSA/RULEATTR.
Any help would be appreciated.
Thanks,
Srinu

Does this support Iphone(3G) from Sprint?

I have a iphone from sprint and I have been watching video on youtube all the time. But yesterday I could not watch video anymore because youtube does not support my cell phone device anymore?
So, my question is does this flash player support my iphone from sprint?
what shall I do to watch video on youtube just like before?

FCPX doesn't import AVCHD files from my Panasonic GH-2, even though importing works perfectly into iMovie. So just because camera X imports natively into iMovie, it isn't certain it will import natively into FCPX.
iMovie archives will always import because the AVCHD has already been converted to ProRes on import.
In FCPX the AVCHD files from say a GH-2 can be edited natively if you don't want to re-render into ProRes, but to date I can't import them to test this.
Chris.

Firefox sucks and apparently so does this "support site"

So originally, Firefox 11 was annoying me by adding an unsolicited homepage to my tabs every time I start the stupid thing, demanding that I should update a variety of plugins that I don't need to disable but don't care to upgrade until I actually need to. I started a query about that.
Then this support site very "helpfully" decided to throw an error and delete my whole post.
I have no reason to upgrade Firefox and no reason to update or delete the 3 or 4 addons that Firefox keeps whining about. This thing is just a mongoloid following me around offering helpful advice about how tasty spaghetti is while I'm at work.
How do I make this idiot stop "helping" me?

this new "support site" really sucks.
a recent running thread was closed -
http://support.mozilla.org/en-US/questions/938821
no idea why, it reflected my question which is still
unsolved there. wth am I supposed to ask a new question
choosing from pre-picked topics like in Ebay if its already
there? mozilla, our pal in the dark IE ages - now same
impatience and bossyness as MS?
anyway, it was nice to see in this thread that in the year 2013
many users are still on the good old 3.6.4 sniffing and esp. sync
free version. where an alternative flash player still gets you most of youtubes which made Adobe's bloat- and spyware redundant for
several years now.
mozillas - please stop giving answers nobody asked for and respect Netscape's heritage of a free '''AND''' independent browser at the
same time!
Damian

How many sessions does apex supports?

Greetings !
I had an requirement of creating web portal for a university having round about 100,000 students.
Does apex supports 100,000 sessions or users to create and connecting almost the same time ?

100,000 students won't do a request (leading to a database session) all at exactly the same time - although you will have peak hours.
And APEX doesn't support the sessions, it is your webserver that should handle the number of requests. That's a matter of sizing/parametrizing your server.
And the number of requests can be influenced by the way your APEX pages are build. For instance, a lot of Ajax features leads to more requests...
And your database should be able to handle the number of sessions : a matter of sizing and setting parameters to the right level (and having physical enough memory).
And the number of sessions a database can handle can be influenced by the way your program your SQL and PL/SQL. "Wrong" (as in : bad performing) code will be more noticable when more users execute that shitty piece of code.
FYI : http://campusit.net/ uses APEX for a similar number of students. (Not affiliated in any way with CampusIT)

After updating to 4.3 I can't connect to wi-fi because the "internet speeds are too slow". How much speed does this require?

After updating to 4.3 I can't connect to wi-fi because the "Internet speeds are too slow". So what speed does it need?

I called tech support and I got the same **** canned response, backup and reset to factory settings. Yeah right! Everything was fine until Verizon shoved the software update down my throat. I finally unchecked the box in Wi-Fi settings for auto network switch. However, I still get the "Your Internet connection is unstable" warning no matter what Wi-Fi connection I hit.
In a related story, I received a new or refurbished phone as my original SIII had AC/charging connection issues. I called probably three times to attempt to back up my data, went into two stores in attempts to have them transfer the information over, and all were too incompetent and inept to assist me. Only when talking to someone about this Wi-Fi issue, did someone actually know how to back up everything. Of course by this time, I had to send the new phone back because Verizon charged me $400 before I got everything squared away. What a colossal waste of my time!

How does this support **** works?

Who can help?
thx

Carlo
Welcome
These forums are mainly User to User with only limited interaction by Adobe staff, you caan tell Adobe staff because they will have the logo and "staff" displayed where you have your logo and "member" status.
For diect discusssion with Adobe you need to start up an online chat or telephone the number given in your country, you will more than likely end up talking to someone in the call centre in India........a tip if you do this, if at first you cannot get the response that you seek, ring off and ring back so you speak to another
Prior to posting in the forum (and do post your question in the software specific area) do a search for previous questions on the same subject and do read the FAQ's that give guidance on the information to provide..............you would not believe the questions asked such as...................Premiere is not working.................how can we help on that.
Good luck

New help how go about doing this.

I do not know SQL. I would like to have it so I could test against the sample database. Thanks
-Kenny
(1) creates a database table named with columns A_Month, A_Day, A_Radius, and An_Area.
(2) enters records into the table by using loops, where
a) A_Month is the month of the year, spelled out fully in capital letters, beginning with JANUARY and ending with DECEMBER
b) A_Day is the day of the month, beginning with 1 and ending with the last day of the month (28, 29, 30, or 31 depending on the month). Leap years are based on the Gregorian calendar (not Julian). The Gregorian calendar has leap years for years evenly divisible by 4, except for century years (those evenly divisible by 100 such as 2000, 2100, 2200, etc. Century years are leap years only if divisible by 400. Thus 2000 and 2400 are leap years, but 2100, 2200, 2300 are not leap years.
c) A_Radius is the radius of mold growing in a big Petri dish, beginning with radius 1 millimeter on January 1 with radius increasing by 2 millimeters per day. For example, on January 2, the radius is 3 mm; on January 3, the radius is 5 mm, etc.
d) An_Area is the area of the mold, pr2 where p = 3.1415926 and r is the radius of the mold on that day
(3) The procedure has two input parameters and one output parameter:
l input: date_begin entered as a string in format dd-mmm-yyyy,
l input: date_end with the same dd-mmm-yyyy format. The year yyyy is assumed to be the same year as for the date_begin, and
l output: area_change (which is the change in area of the mold, the difference in the two areas of the circular mold on the two dates). The two areas must be found from the table, then the smaller (or same) area for the earlier (or same date) subtracted from the area for the second date.
example.sql that first creates the above stored procedure. Following that procedure is an anonymous PL/SQL program that calls the procedure with actual dates entered as literals. Output to the screen your name, student ID, the two strings for dates, and the area_change. Use many concise comments in your coding. Debug, execute, and print both programs.
5) Change the anonymous program to prompt the user to input the two dates interactively from the keyboard at run-time. Include the procedure in a package. Submit only one version of the program.
null

Fascinating, but unfortunately rather off topic. For starters, try the PL/SQL User's Manual and Reference available at this website:
http://technet.oracle.com/doc/oracle8i_816/appdev.816/a77069/toc.htm
Thank you!

How the Heck does this software work? I am so frustrated!

I followed the instructions and imported my videos into the adobe premier elements organizer. .
I see all of the videos in the organizer. I then added the videos to an album. THIS IS WHERE I GET STUCK
Question is what do I do from here. I right clicked on some videos and chose EDIT WITH PREMIER ELEMENTS.
The software then opens up another screen which is all blank and pretty much every thing that I try to click on is greyed out.
Once I import my videos HOW DO I EDIT THEM. PLEASE HELP

Take a look at this FAQ Entry. Steve Grisetti, our tireless MOD and world-class author, has a wonderful Basic Training series (plus many more articles in the Learning Series) on Muvipix.com. He also has some great books on PrE 8, plus some other programs, like Sony's DVD Architect, and a soon-to-be-released Tips & Tricks for PrE 8 book.
As for where to go from there, you will need to create a New Project, and choose the Preset, that matches your AV files 100%. If you do not know the full specs. that you camera shoots, the great, free utility, G-SPOT, will give you everything that you need. What camera was used to shoot the Clips?
I'd use the Timeline View Mode, and then just drag the Clips to the Timeline, where you can Trim them, shuffle them around, add Effects, and Transitions to suit.
Good luck,
Hunt

How is she doing this? "Underlining Every Line of a Paragraph"

So a very "crafty" designer before me... in Pagemaker 7, managed to make a paragraph that had an 'underline' under each line.
Now whatever she did, it translates into InDesign (CS5) but I can not figure out in either Pagemaker or InDesign, how the formatting is being achieved...
what it's not is a "custom underline" and I doubt it's an anchored stroke as, it generates and removes lines as new rows are created and rows are deleted...

paragraph rule

694D Pro2(-IR?) How big HD does this support?

Similar Messages

Maybe you are looking for