6950 Twin FrozR III no voltage control with AfterBurner

Hi,
Posted this in the graphics card forum but this might be better place
I can't seem to get core voltage slider enabled with Afterburner 2.3.1.  I ticked the box in options ??  CCC is also disabled.

can you test either of the card in another PC?
have you tried to turn off the vsync?

Similar Messages

  • 6950 Twin Frozr III/PE, Low FPS, Low GPU usage

    I could use some help, I've tried everything I can think of and no luck so far so maybe someone here can help. I spent all weekend trying to fix it with no luck.
    I am having issues with my MSI 6950 Twin Frozr III/Power Edition cards. When playing a games my GPU usage never seems to get above 50%. I've tried each card individually and in crossfire but it never seems to make a difference. My frame rates fluctuate between 70 and 20 FPS while the GPU load fluctuates between 30-50%. Crossfire or not the frame rates and GPU usage stays about the same, never using more than 60% of the GPU. I only recently began seeing issues but I don't remember exactly when it started.
    Hardware tried:
    MSI 6950 Twin Frozr III/Power Edition (not flashed to 6970)
    AMD Phenom II x6 1090T @4.0GHz
    MSI 890FXA-GD70
    16GB Mushkin DDR3 1600
    Mushkin SATA III SSD
    NZXT HALE90 850W PSU
    14x FN 120RB 120mm fans
    Aquacomputer Airplex Radiator with built in D5 Pump
    i7-2600K @4.6GHz
    ASUS P8P67 Pro
    16GB Corsair DDR3 1600
    OCZ Vertex 3 SSD
    SeaSonic X750 Gold 750W
    Corsair H60
    Things I've tried (tried with both cards individually and in crossfire with no change, and in both systems, and various combinations)
    -Current Drivers 12.10
    -Rolling drivers back to 11.11
    -Beta 12.11 Drivers
    -Set constant voltage in Afterburner (heard that was causing conflict problems between Afterburner and CCC)
    -Tried switching the cards between my 1090T @4.0GHz and my i7-2600K @4.6GHz and no change (both CPUs stay at around 60-70% so I dont think thats the bottleneck)
    -Set power tune to +20%
    -Tried clean install of windows 7 and no change
    -Checked both PSUs with tester and both check out fine (not sure if the load is too much for them though)
    Games that I've tried (with issues):
    -Borderlands 2
    -Hawken
    -Dishonord
    -Skyrim
    -Dirt 3
    -Saints Row 3
    -Need for Speed: Most Wanted (always been bad but doesn't seem to be made any worse like the others)
    I'm getting very discouraged and really hoping my graphics cards aren't going bad (they are only a year old). Any help is greatly appreciated.

    can you test either of the card in another PC?
    have you tried to turn off the vsync?

  • 6950 Twin Frozr III PE problem

    Such a problem. The video card 6950 Twin Frozr III PE 2 GB when you change the settings in CCC artifacts appear and the system hangs after a few seconds. On the Russian forum one of the users have described this problem, but got no reply.
    Except for problems with the ССС, graphics card behaves quite adequately.
    To my letter to AMD told me that I did not reference card and I need to communicate with the manufacturer. Cards from Asus, Sapphire on this system works without problems. I changed the driver 11.6-11.9, reinstalled Windows, it does not help.
      Asus P8H67-M LX / Core i5-2400 / Samsung DDR3 1333 2x2 Gb / Chieftec CFT-650-14CS / Win 7 x64 max (original OEM). Graphics Card 6950 Twin Frozr III PE 2 Gb
    Sorry for the bad English.

    I turned off the automatic fan control, set it at 80% to estimate the maximum noise also changed the Ai settings. In both cases, once the artifacts, in 2-3 seconds, the system hung. Drivers - catalist 11.9. On the disk driver is too old.

  • MOVED: Can I unlock 6950 Twin Frozr III Power Edition to 6970 shaders?

    This topic has been moved to Overclockers & Undervolting & Modding Corner.
    https://forum-en.msi.com/index.php?topic=148995.0

    Quote from: v1p3r on 25-May-11, 09:02:27
    Hi,
    I have purchased the MSI 6950 Twin Frozr III Power Edition.
    I was wondering if it can be unlocked to the 6970 shaders? Thanks.
    OK, HERE IS THE SKIVY, THE MSI R6950 TWIN FROZER 3 PE OC 2GIG, DOES UNLOCK, I FLASHED THE CARD WITH SUPPLIED BIOS FROM MSI, R6950PEX.BIN IT UNLOCKS ALL, VOLTAGE CORE, OVERCLOCK, ETC.  I DID NOT SEE ANY CHANGE HOWEVER IN THE SHADERS, MY GPU-Z IS THE UP TO DATE VERSION. SO NOT SURE IF THEY UNLOCK OR NOT. I ALSO PURPOSELY FLASHED A 6970 BIOS, ON THE CARD AS WELL // CRASHED IT. FLICKED THE **BIOS SWITCH** & BOOM IT BOOTS UP NO PROBLEM, IN WINDOWS, RUNNING, I SWITCHED IT BACK, & REFLASHED THE ORIGINAL BIOS OVER THE 6970 BIOS.....SO FAR EVERYTHING WORKS  AWESOME // GREAT DESIGN HERE....THIS IS MY FIRST RADEON BASED CARD IN LIKE 15 YEARS // GONNA PLAY SOME MORE & I WILL REPOST WHEN I FIGURE OUT THE SHADERS.........MrStude2r5

  • Can I unlock 6950 Twin Frozr III Power Edition to 6970 shaders?

    Hi,
    I have purchased the MSI 6950 Twin Frozr III Power Edition.
    I was wondering if it can be unlocked to the 6970 shaders? Thanks.

    Quote from: v1p3r on 25-May-11, 09:02:27
    Hi,
    I have purchased the MSI 6950 Twin Frozr III Power Edition.
    I was wondering if it can be unlocked to the 6970 shaders? Thanks.
    OK, HERE IS THE SKIVY, THE MSI R6950 TWIN FROZER 3 PE OC 2GIG, DOES UNLOCK, I FLASHED THE CARD WITH SUPPLIED BIOS FROM MSI, R6950PEX.BIN IT UNLOCKS ALL, VOLTAGE CORE, OVERCLOCK, ETC.  I DID NOT SEE ANY CHANGE HOWEVER IN THE SHADERS, MY GPU-Z IS THE UP TO DATE VERSION. SO NOT SURE IF THEY UNLOCK OR NOT. I ALSO PURPOSELY FLASHED A 6970 BIOS, ON THE CARD AS WELL // CRASHED IT. FLICKED THE **BIOS SWITCH** & BOOM IT BOOTS UP NO PROBLEM, IN WINDOWS, RUNNING, I SWITCHED IT BACK, & REFLASHED THE ORIGINAL BIOS OVER THE 6970 BIOS.....SO FAR EVERYTHING WORKS  AWESOME // GREAT DESIGN HERE....THIS IS MY FIRST RADEON BASED CARD IN LIKE 15 YEARS // GONNA PLAY SOME MORE & I WILL REPOST WHEN I FIGURE OUT THE SHADERS.........MrStude2r5

  • 6950 Twin FROZR III Fan blade BROKE!!!!Help!

    when i was playing a game, i turned the fan to 80% fan speed and this happened :( the card is 1 week old and newegg can't help me...What can i do... if i leave the fan like this it will die because its unbalanced

    Quote from: Svet on 20-April-11, 16:21:29
    My advice is best RMA it as is, msi/reseller normally will not accept modified stuffs.
    Also the FAN is a new special design introduced with Twin Frozr III Thermal Design called Propeller Blade fan. [images attached]
    * MSI  Propeller  Blade  technology  generates  20%  more  airflow  than  traditional
    design, and the airflow covers wider area for the better heat dissipation. Twin Frozr
    III thermal design provides 11°C cooler & 13.9dB quieter than reference cooler .
    20% More Airflow with Exclusive Propeller Blade Technology
    The MSI R6950 Twin Frozr III Power Edition is equipped with the latest Twin Frozr III dual fan thermal solution. The MSI-exclusive Propeller Blade technology features air channels on the edge of the blades to expand total airflow by up to 20%! The twin 8cm PWM fans, heat pipe technology, large surface-area nickel-plated copper base and high fin density all serve to rapidly draw excess heat away from the graphics card. Under a full load, the R6950 Twin Frozr III Power Edition GPU runs 11˚C cooler than the reference design, and noise emission is reduced by 13.9 dB— validating the superior cooling performance and silent running advantages of the Twin Frozr III.
    Since active users may use their graphics cards for a variety of applications, MSI developed the exclusive P/S Switch function for controlling the speed of the fans. The Performance Mode is used to achieve an optimal cooling performance, helping to keep the GPU cool even under high loads. For applications or settings where noiselessness is preferred, the Silent Mode can be utilized as the appropriate mode for gaming or movies, ensuring that fan noise is kept to a minimum while still receiving outstanding cooling performance.
    if i RMA it they said i probably wont get a TF3 back, i want a TF3 I paid for a tf3. or atleast the fan....they wont even sell me a fan..and to rma it i need to pay 45$+shipping..think im gonna file a bbb on newegg..
    msi wont even let me buy a replacement fan -_-

  • 7950 twin frozr iii running under load with nothing going on?

    For some reason (and randomly it seems) my GPU load will be nearly maxed and heating up the gpu for no reason. I had left it sitting as i went to the store shortly after turning it on and it was running around 80-95%~ load when all that was going was skype in the background along with MSI afterburner and AMD catalyst. Why would it randomly do this?

    Can you follow this >>Posting Guide<< please. Make sure you provide enough detail.
    Try removing drivers once again, but this time use >>Driver Fusion<< while in safe mode, then reboot and install fresh drivers from AMD (don't look on MSI's for GPU drivers). Also uninstall Afterburner.
    If your HDD is quite big, are you able to create new partition and install fresh Windows on it/or different HDD where OS is not installed? So you don't remove all the current drivers etc, we want just fresh windows on new partition to see if it's something messed up with OS.

  • Unlocking voltages on a MSI Radeon HD 7970 Twin Frozr III OC

    hi guys
    i just recently purchased a MSI Radeon HD 7970 Twin Frozr III OC  to add to m y xfx hd 7970 edition for crossfire  card works great but i've installed afterburner , my xfx 7970 voltages are unlocked but the msi voltages are 0 (not unlocked / showing)  , my buddies MSI Radeon HD 7970 Twin Frozr III OC  voltages are unlocked and im pretty sure mine should be also     what am i missing ????   please help    my xfx 7970 is water cooled , and soon my MSI Radeon HD 7970 Twin Frozr III OC  will be also  (EK block and back plate are sitting on my desk) , i'm hoping i will be able to run at least at 1300/1700  , my xfx black edition does 1475/1800   

    kinda tough when the xfx 7970 is water cooled  and soon the msi card will be included 

  • R6950 Twin Frozr III Issue

    Ok, brand new build P8P67 Pro (Rev 3) initially boots up fine and I install windows. The next day I get no output to monitor with my MSI 6950 Twin Frozr III, also motherboard is beeping to indicate no VGA detected. Put it in second PCI-E slot and bingo, it works but it's at 8x.
    Presume mobo faulty, got an MSI Z68A GD65, I get the exact same problem, won't show anything in primary slot but will run fine in secondary at 8x.
    I really don't understand what the problem could be if not the graphics card in this case.
    Any advice would be appreciated.
    Rest of the spec:
    i5 2600k (stock speed)
    Corsair TX 650,
    Kingston HyperX Genesis Grey 8GB (2x4GB) DDR3 PC3-12800C9 1600MHz.

    reseat the card into the slot and ensure that's filled very well into the PCI-E slot
    also ensure that all power cables are connected to the VGA.

  • 7850 Twin Frozr III UEFI bios doesn't work with CSM mode off

    Hello, everyone! I'm using two 7850 twin frozr III with both having the 050 serial numbers and I've flashed both of my cards with the 050 uefi bios provided somewhere in this forum. The system works fine on legacy boot mode but the problem is that, whenever I turn off the CSM option in the bios to try and boot in fast boot, the system just won't boot. Kinda like no video or something.
    Here's my system specs:
    Asus m5a99x evo r2.0 motherboard (with the latest bios)
    2x 7850 Twin Frozr III in crossfire
    Phenom II 965 Processor
    8gb of ram (dual channel)
    650w 80+ bronze PSU
    2x 500gb WD Hard disk

    clear cmos of your mainboard, else contact mainboard vendor to have ask

  • Freeze Msi Hd 7950 Twin Frozr III v2

    Hi !
    I have a Msi Hd 7950 Twin Frozr III v2 (hd 7970 pcb) and  there are problems. The card back on the desktop  when i play Battlefield 3. I use amd driver 12.11 beta 6. With 12.8 i haven't that. I have freeze or a back on the desktop when i use Occt, Furmark and Unigine Heaven with two drivers (12.11 and 12.8).
    I think the card hasn't enough voltage when it sustained heavy stress. But i can't control the voltage 
    What do you think ? I await your advices 
    PS : sorry if my english isn't perfec :lol_anim:t 

     
    My pc :
    Board: Gigabyte Z68X UDP3
    Bios: F8
    VGA:   MSI HD 7950 Twin Frozr III v2
    PSU:   Silver Power SP SS 620w (2 rail - 24A - 12v)
    Intel Core i5-2500K Sandy Bridge 3.3GHz LGA 1155 95W
    MEM: Corsair 1600 2x4gb Vengeance LP
    HDD: SSD Samsung 830 series 128go and Spinpoint F3 1To
    COOLER: Prolimatech Mega Shadow
    OS: Windows 7 64bit Professional
    I tried my gpu with an other motherboad P5KPL/EPU and Windows XP.
    I tried with a Antec Basiq 500w.
    I tried with a Maxtor 320go.
    When i use Occt with directx 9, no problem. But with directx 10, errors immediatly.
    Furmark 1.10.3 (directx 11), errors immediatly.
    Unigine Heaven 3.0, sometimes i have freeze. Otherwise i have lags.

  • N570GTX Twin Frozr III Power Edition/OC ----- No Boot / Blue Screen

    Hello all,
      I recently purchase a brand new N570GTX Twin Frozr III Power Edition/OC.  Previous to installing the card I had a gt250 with the latest Nvidia drivers installed (285.62).  I installed the n570 and booted up no problems.  I was able to see the new card installed in device manager and also confirmed it in afterburner.  However, I wasn't able to set or view the voltage settings even after enabling in preferences and restarting afterburner.  Although, the remaining settings / stats seemed to work fine.  I was also able to do a full kombuster (ultra settings) benchmark with no problems, receiving a decent score and topping out temps in the high 50's I think.  I also played a few games and turned up settings with no trouble.
      When I rebooted my machine as the windows load screen popped up I got a BSOD and an error referencing nvlddmkm.sys.  All reboots there after either failed to the same BSOD error or rebooted the machine.  Booting into safe mode had no problem as did booting into normal mode if I uninstalled all nvidia drivers first.   As long as I boot into safe mode or there's no drivers installed it doesn't fail.
      I've tried every version of the nvidia drivers I can find.  286.62, the newest 290 beta drivers, the 266 versions that came on the cd and multiple 270's version that were noted the most stable in internet forums...all produce the same results.  I then updated the bios on my motherboard to the latest.  I also reinstalled a fresh copy of win7 x64, and ran all system updates include service pack 1.  I did all those updates with my 250 installed.  After I had a solid system I put in the n570 and rebooted.  I again had a perfect boot and was able to access the card (not the voltage via afterburned or any info via live update 5).  I was able to run benchmarks etc once again.  Upon a reboot, it failed back to the BSOD again.  I repeated the multiple driver tests, all failed the same.
      If anyone could suggest something other than RMA I would be happy to give something else a try.  It seems silly to RMA a card that works so well on first boot until I reboot windows.  But I'm out of ideas...
    System specs:
    N570GTX Twin Frozr III Power Edition/OC
    Intel Core i7 950
    6gigs Ram
    730 watt power supply (w/ dual pci-e power connectors)
    Gigabyte x58a-ud3r rev2 (newest bios - standard clock speeds - default voltage settings for pcie)
    Win7 x64 Service pack 1 (all windows updates)
    Thanks for any help.

    Also, if it helps to note, on the initial install (both times) the card was stable for hours until I shut down and rebooted.  If it were a power issue wouldn't it be unlikely to be stable for such a long time (even during stress tests) and then not even be able to load windows correct after a reset?  Seems like a driver issue to me, however as I've said I've tried them ALL haha.
    Thanks for the help

  • Help flashing UEFI bios for my GTX 680 Twin Frozr III 2GD5/OC

    Hi,
    I am very new to flashing graphics card bios, so i need some instructions as to how to update my bios to the latest UEFI GOP version. I am using a Z77 platform with Windows 8 Pro and I'm looking forward to the super fast boot times
    Here is my current bios file: **http://www.filehosting.org/file/details/434943/GK104.rom**
    Here is my serial number: 602-V282-020B1205147435
    My model: MSI GTX 680 Twin Frozr III 2GD5/OC
    Thank you

    I have followed the steps you said, but had a few hiccups on the way:
    1) when i was flashing the rom, i was told in the command line dialog box that the pci vendor identification/verification was mismatched, i was prompted to override verification and i pressed "y". Is that ok ? In total, i had to press "y" 2 times as opposed to once as said in your instructions.
    2) After flashing bios, I restarted and disabled CSM (compatibility mode) support. My PC booted fine and i reached the lock screen. But when i entered the password, I was introduced to a black screen with only the cursor showing over it. Then my pc crashed with the error IRQ_NOT_LESS_THAN_OR_EQUAL_TO
    3) I restarted and logged back again, but was introduced to the same black screen again, but i could gain access to the control panel with CLT+ALT+DEL and it was filled with error reporting tasks. I restarted the third time and finally could log back in without any crashes or black screens, but windows came up with a prompt that it had run into an error and needs to report it.
    I am suspecting that it had something to do with the driver or the verification.
    PLEASE HELP. Thanks

  • Switch on 570 Twin Frozr III POWER Edition

    I noticed there is a switch on the MSI 570 Twin frozr III card:
    http://i.imgur.com/M0NBW.jpg
    I have heard two different things:
    A. It was a second bios
    B. It was a profile for the fans?
    So which is it?
    Thanks for the help in advance.

    Quote from: Th3Hunt3r on 12-June-11, 07:14:54
    i also asked about this in my thread with few other questions, but i never got your reply..
    anyway i noticed that in silent mode i can adjust only gpu voltage, rest is disabled(mem and aux voltage).. Is it suppose to be like that?
    Yes, sounds logical

  • Twin Frozr III fan sticker?

          I have video card with Twin Frozr III cooling system and I have problem one fan is not working correctly and I think to put some oil in it (that helped in previous MSI cards) but problem is fan on Twin Frozr III is without sticker they have plastic plug on top which is unmovable I think glue sealed, question is how to put new oil in fan?

    contact to reseller about it

Maybe you are looking for