6Gnano shows some Video in iTunes's Capacity Bar

Running iTunes 10.1.2 on a 8GB Gen6Nano,
the Summary's "Capacity" bargraph shows:
Capacity 7.35GB, Audio 3.2GB, Video 0.71GB, Photos 0.04GB, Other 0.13GB, Free 3.4GB
I have just a few photos, but Video???
Why would a 6G nano show any Video in there?

Hello dtsssmudge,
And welcome to Apple Discussions!
Are you syncing any music videos or video podcasts to your iPod? I'm aware that the 6G Nano cannot play video, but you can still sync such items as music videos and video podcasts to it. Of course, it will not play the actual video but either of those items could account for that 0.71 GB of Video.
If nothing else, it might help to restore the iPod to factory settings to see if that does any good.
B-rock

Similar Messages

  • I've just brought some video from itune, but realised the I should have brought the SD version instead of HD version as my iPad didn't have enough storage. Can I change that from HD to SD?

    I've just brought some video from itune, but realised the I should have brought the SD version instead of HD version as my iPad didn't have enough storage. Can I change that from HD to SD?
    Does it mean that I can't watch it if I cannot download it?

    this helps. check it out! http://support.apple.com/kb/ht3209

  • HT1351 hello my apod nano 5th generation is not showing my videos on itunes...what can i do to watch my videos on itunes?

    hello my apod nano 5th generation is not showing my videos on itunes...what can i do to watch my videos on itunes?

    Try changing the cord. I could NOT get my computer to recognize my iPod 5th Gen until I read somewhere that different apple devices use different cords. I was inadvertently using my iPad cord and that caused my computer to not recognize my ipod.

  • I can't show my video in itunes

    Hi,
    I have a windows 8. I download the last version of itunes (11.0.1.12). When I try to play a video via itunes, the program doesn't respond. The videos are in the right format since I can play them on my ipod.
    Thanks for your help.

    Download QuickTime. It wasn't included in the iTunes 11 download.
    http://support.apple.com/kb/DL837

  • ITunes 7 Capacity Bar

    When iPod is connected and you look at the 'Summary' page there is a multicolored Capacity bar that now displays with Audio, Video, Photos, Other, and Free Space catagories. What the heck is 'Other'? On my iPod, Other takes up considerable space (about 10 gigs). When I look at the iPod as a hard disk, I can't figure out what this could be. I have no real entries in Calendars, Contacts, or Notes folders. Then there are the usual Photos and iPod Control folders with my music, videos and photos. So where is this Other?
    Sandy

    I'm having the same problem. I have a 20GB iPod with over 7GB of "Other". When I enable disk use and look at what is on my iPod I see "Calendars", "Contacts", "Notes" (all of which are more or less empty), and over a dozen folders named with strange characters. I am not able to open these folders.
    Interesting side note: when I select these mystery folders and files, Windows tells me the combined file size is about 46GB.
      Windows XP  

  • Is there a way to only show some music from itunes match?  my wife doesnt want to see every song we have, only the ones she likes

    Is there a way to hide songs/albumbs in itunes match only on certain devices?  
    for example, I have a huge collection of songs, and my wife only wants to see 'her stuff' on her iphone.
    or am i going to have to create another account just for her, and either rebuy or manualy store the songs on her phone?

    Hi
    You can only use one Apple id for your iTunes match.
    At present there is no way to hide selected songs.
    Whilst all the music will show on you wife's iphone, she could create playlist(s) on your computer to include only her songs.
    Jim

  • Help!!! i updated itunes and now im trying to sync some videos from itunes snd it keeps giving me that you earase and sync you can only use one computer at a time

    okay so i updated itunes and now it wont let me sync anything it keeps giving me that "you can only be synced with one computer at a time erase and sync"  but this is the only computer ive ever used!!!  pleeeease help!!
    <Edited By Host>

    Re: That garbage is unreadable.
    If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
    Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
    I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself.

  • Downloading TV Shows to VIdeo IPOD

    I downloaded some tv shows through a tv tuner onto my hard drive. I also purchased Quick Time Pro and have it installed on my desktop. Somehow, while fiddling around with the tv videos, I got them into itunes. The videos play in itunes, but I cannot get them downloaded to my ipod. How did the videos get into itunes and how can I get them into my ipod? I purchased some video from itunes and they work perfectly on my ipod.

    I'm not too sure why but I think iTunes (video) is featured to be able to playback most of quicktime format videos. Handy for most but lil confusing for new ipod users. Meaning you're able to store any quicktime videos in iTunes for instant playback on desktop. But for iPod to be able to play it back, it has to be of a specific format. Either m4v/mp4 with mp3/aac audio with average bitrate no more than 640kbps.
    Having quicktime pro should help you a bit with the conversion. In short it can help you compress prefereably higher quality video to the lower quality iPod format and never vise versa. In QTPro, Open the video/mov file that you want to have into your iPod. Then select Export As (Apple+E).... and you will see one of the choices as Movie to iPod (320x240). The rest should be dandy from then on. Import the exported file into iTunes or directly into your iPod's video folder.
    If you're refering to wmv video which is played back with quicktime thru 3rd party plugin like Flip4Mac, these are definite no go for iPods which only takes quicktime format.
    These advise are all from personal experience. Best to ask the video experts or google-up on video conversion and compressions for ipods. Good luck!

  • Good quality video in itunes

    ok so I have a mac mini, eyetv (thus lots of mpeg2) and a philips plasma tv.
    Mpeg2 from eyetv plays full screen..... lovely good quality etc.
    Now whats the suggested BEST route for getting some video into itunes, I WANT to keep the 720x xxx size and i want the best quality possible!
    I have tried H.264 and I must say that with all of the settings tuned for highest quality, not only did it take for ever to encode a 1.5 hr movie but the quality on my 37" plasma was VERY disappointing. i.e. pixelated all over the place.
    any help or suggestions?
    Steve

    In the article it suggests disabling 'Direct3D video acceleration in Quicktime'. On my computer it does not show that option. And it does not help much in disabling DirectX altogether.
    Also, my computer does not have the option illustrated in the screenshots in 'Modify your System Drive Configuration'. I am not sure why it is differen, but I can send you screenshots from my computer to your email if you want.

  • I can't see videos of itunes U in my ipad

    Hello
    I have an ipad 1 with IOS 5, i recently download some videos of itunes U but i can see them in my ipad but if I sinc with itunes I can see them on itunes
    What's wrong???
    Thanks for all

    Do other apps connect to the internet on the iPad ? If they do then have you tried logging out and back into the account on it (Settings > iTunes & App Store), disconnecting and reconnecting to your network, and/or tried a soft-reset ?

  • Some videos are not showing in Apple TV playlist after upgrade to 6.0.  Can play on Macbook itunes and using airplay to Apple TV.  Anybody else have this issue?

    Some videos are not showing in my Apple TV playlists after upgrade to 6.0.  They were there prior to upgrade and I can play on Macbook itunes and also using using airplay to Apple TV.  Anybody else have this issue?

    Ok, so I'll try again.  Thank you for the idea of looking in Home Videos, which is where all my "lost" videos are listed.
    Is there a way to get them to display under their appropriate genre in the Movie section, which is where they all were listed prior to the os6 update?  It does me no good to have hundreds of movies categorized in iTunes via a genre only to have them appear in Home Videos on ATV.  These are not "home movies." They are legit mp4 movies that worked great under v5.

  • ITunes will play some videos, but not others?

    Hello,
    I use my MacBook Pro at home with Apple TV to home share videos and music. I have also recently upgraded to mavericks.
    When I play videos on my tv at home they work fine, but I am traveling and now videos will not play. They just show 0:00 with a pause button instead of a play button. Some videos do work, but only a handful.
    Would this be due to the mavericks upgrade? Should I re-install iTunes?
    Any help would be greatly appreciated!

    Hi gta,
    Ok.. let's try this. Launch Disk Utility, it's in your Applications/Utilities folder. Select MacintoshHD 10.x.x in the panel on the left, select the FirstAid tab, then click: Repair Disk Permissions. Quit Disk Utility when it's finished.
    Get Onyx. It's a free disk utility. Run the Maintenance and Cleaning Scripts once a week. It's available here: http://www.apple.com/downloads/macosx/systemdiskutilities/onyx.html
    If none of the above works, delete these files:
    /Library/Preferences/com.apple.networkConfig.plist
    /Users/YourName/Library/Preferences/com.apple.NetworkDiagnostics.plist
    /Users/YourName/Library/Preferences/com.apple.NetworkUtility.plist
    Note -- the com.apple.network.Config.plist is not located in your home folder --
    Drag those files to the Trash, empty the Trash and reboot. You will have to reset your network preferences.
    Carolyn

  • Upgraded to 7.0.2 and now iTunes will not show a video horizontally

    I have an iphone 4s.  Since upgrading to 7.0.2, itunes will now show a video horizontally.  The portrait view is also much smaller.  I tried changing settings, but I haven't found how to fix this.

    Now iTunes won't open. It doesn't give me any error messages it just won't open the window.
    some preliminary questions aimed at narrowing in on possible culprits.
    (1) do you have Norton Internet Security 2005 installed on the PC?
    (2) try launching your QuickTime. does it:
    (a) launch perfectly fine?
    (b) fail to launch with an error message? (if so, what does it say?)
    (c) exhibit other peculiar behavior? (if so, could you describe it for us?)
    (3) reboot the PC. bring up your Task Manager, and click on the "Processes" tab. now try to launch itunes again.
    does an "itunes.exe" process appear in the Processes tab? if so, does it persist in there or does it disappear after a few seconds?

  • My Mac is showing that I am out of disk space.  It says I have 175 MB of videos.  I cannot find any videos in Itunes, Imovie or IPicture.  What gives?

    My Mac is showing that I am out of disk space.  It says I have 175 MB of videos.  I cannot find any videos in Itunes, Imovie or IPicture.  What gives?

    For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
    iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with the app, quit it and also quit Terminal.

  • Itunes will only show apple tv as device, but itunes won't show some tabs

    when apple tv is connected to my laptop, itunes will show the device but the screen won't show some of the tabs like: info, or music, it does show: summary, photos. What is wrong with itunes not showing the apple tv device source tabs?

    Hello Nate, thanx for the solution but that also doesn't worked for me and to name it - I am not willing to disable my firewall to get something running that worked before the atv 2.4 and itunes update - same with my network settings - after trying static IPs I returned to DHCP - so if there are friends in my network they don't need to adjust anything at their devices! And I am not working with WLAN - just simple cable - good, fast and save!
    My atv has a static MAC-Address isn't it an easy thing for a software to search for it? I am willing to enter it in itunes if I could but I can't!
    The whole software programming seems not to be very buggy and insufficent to me!
    e.g.
    1) The atv reboot-function on the atv-remote with pressing - and menu for 5 seconds always gets me the fancy question mark - so the only real reboot is pulling the plug,
    2) On itunes I can test my network, my iphone and my ipod (which I don't have) but why can't I test my apple tv connection?
    3) Sometimes I had the problem that I have to sync some content (music and videos) more than one time to be accepted from the atv - even if it was mp3 and mp4 - but that's not a problem anymore while there is not any sync for the atv
    It seems to me that I am forced to enable SSH or FTP-connect so I can get rid of itunes!

Maybe you are looking for

  • Issue with Popup LOV field not clearing out "default" value

    I am using APEX 4.0 & Oracle 10g I have a form that displays a default value on a "Popup LOV" field (say P1_POPUP) when the Form is initially displayed to the user. The default value is part of the Popup LOV list of values. If the field is "manually

  • Purchase order changed affect PO history

    Hi:  I have the following porblem:  I created a service purchase order with the following data:  One position:  Service  Position value: 60496  Quantity: 1  Value: 60496  The I entered the service entry sheet (ml81n) and the invoice (MIR7)  The next

  • Value questions for SAP HR Reporting

    I am working as a "SAP HR Functional consultant". I am preparing Value Questions that can benefit End users with respect to SAP HR Reporting. Could you kindly help me by sending some questions [If you have any ] & Also tell me how to prepare them? <b

  • The conversion of the varchar value '11100000000000000000000000000000000000' overflowed an int column.

    IS THERE ANY ALTERNATE WAYS TO DO THIS QUERY SELECT        VI.AssessmentId, VI.SubmissionDate,                     CASE WHEN(ISNULL(VI.Screening,0)+ISNULL(VI.BriefIntervention,0)+ISNULL(VI.TreatmentPlanning,0)+ISNULL(VI.IndividualCounseling,0)       

  • Question about SMTP...!!!

    Hi everyone. I just want to know about SMTP HOST Name. I know little about SMTP i-e Simple Mail Transfer Protocol but can you plz give me a simple example ummmmm for example if I am using Yahoo to send e-mail from my Java application then what I have