6i release 4 problem to install

I am currently using Oracle8i
I am installing the Designer and Repository 6i Release 4
on Winnt.
Please tell me:
how can install designer release 4 in the same machine with oracle 8i. it's posible?
Please help. Thank you.

To my opinion it's no problem. I've installed it on W2K + Oracle 817. If you're interested in the scripts to configure the repository..send me an email (cannot garantee (100%) it on NT).
Regards
Martin

Similar Messages

Problem with Installing the Oracle8i PO into Windows ME

I think I have the same problem as some of you had. Recently, I bought the Oracle Book and it has 3 discs: 1 for Oracle Developer 6 for Win 95 or 98, 1 for Oracle 8i PO (release 8.1.5) for Win 95, also 1 for Win 98.
My computer had no problem when I installed the Or. Developer. However, my computer won't allow me to install the Oracle 8i PO Win 98 disc. Instead of that, I have no problem of installing the Oracle 8i PO Win 95 disc. After I installed the Win 95 disc with all correct configuration according to the instructions, I can not CONNECT to the database. So, is this mean the Windows ME is compatible with the Win 95 disc? Or my computer is "screw up"? Because I know Win Me is very much the same as Win 98. If I installed the Win 98 disc, it should be ok. Anyway, I installed the Win 95 disc successful, but can not CONNECT.
So if anyone can help me out, or need a specific error message, I will post up next time. For now, I think I already gave you guys a "head-ache"... sorry.... Thanks all! Wait for your helps guys!

What drivers are you attempting to install?
- Peter

Problem to install SAP R/3 4.6 on Windows server entreprise 2003

Hello all,
I've a problem to install SAP R/3 on a windows enterprise server 2003.
This is the step I made :
1) Install Windows enterprise server 2003
2) Add IPX and Netbios to the network (adress ip 192.168.10.2)
3) Add 192.168.10.2 srv1 SAPTRANHOST to the hosts file
4) Create User - C11adm; Assign administrator privileges
5) Start Update DLL's from Kernal CD.
6) Login as c11adm and Install Oracle 9.2 with the options :
File locations :
Source :
      Path : no change the path
Destination :
      Name : C1192
      Path : C:\oracle\C11\92
Available Products :
      Oracle9i Database 9.2.0.1.0
Installation type :
      Enterprise Edition
Database configuration :
      General Purpose
Oracle service for Microsoft Transaction server
      Port number : 2030
Database Identification :
      Global database name : srv1
      SID : srv1
Database File location :
      c:\oracle\oradata
Database charactere set :
      Use the default charactere set
7) Stop all oracle services
8) Install oracle 9.2.0.4.1 patch :
    OUI - V 2.2.0.18.0
    Oracle 9iR2 patch set 9.2.0.4.0
9) Install SAP R/3 disc 4.6D EXT Kernel
    INSTGUI options:
    Sap system name : C11
    Install Directory : C:\USERS\C11ADM\Install
    Sap Release to install : R/3 4.6C SR2
Error : CDINSTEXTRACTSAPMMCMSC_NT_IND InstallationDo 2342
Does somebody could help me ?
Regards.
4. Give all users access to ora_dba
5. Restart, login as c11adm and continue installation.

Hello Peter,
For the note 578004 Sap said :
            a) Copy the content of the respective Kernel CD to a local empty working directory.
                       For example, for a 4.6C SR2 system you use the 4.6C SR2 Kernel CD, for APO 3.0A you use the Kernel CD for APO 3.0A, etc.
But for myself, i don"t understand what they said because I Want to install 4.6c and they said "use the 4.6c SR2 Kernel CD" but where I can find this CD because I downloaded the files below :
50045631_1     Online Docu 4.6C Disc 1 HTML Help Windows 9x/NT German
50045631_2     Online Docu 4.6C Disc 2 Standard HTML German
50045631_3     Online Docu 4.6C Disc 1 English HTML Help for Windows 9x/NT
50045631_4     Online Docu 4.6C Disc 2 English Standard HTML
50046529     R/3 4.6C SR2 Installation Documentation
50056848_1     DVD 4.6C Online Documentation (3) 1 of 11
50056848_10     DVD 4.6C Online Documentation (3) 10 of 11
50056848_11     DVD 4.6C Online Documentation (3) 11 of 11
50056848_2     DVD 4.6C Online Documentation (3) 2 of 11
50056848_3     DVD 4.6C Online Documentation (3) 3 of 11
50056848_4     DVD 4.6C Online Documentation (3) 4 of 11
50056848_5     DVD 4.6C Online Documentation (3) 5 of 11
50056848_6     DVD 4.6C Online Documentation (3) 6 of 11
50056848_7     DVD 4.6C Online Documentation (3) 7 of 11
50056848_8     DVD 4.6C Online Documentation (3) 8 of 11
50056848_9     DVD 4.6C Online Documentation (3) 9 of 11
50078731_1     NW 2004s SR1 Presentation - Adobe LiveCycle Designer 7.0
50078731_2     NW 2004s SR1 Presentation - SAP Content Server 6.40
50078731_3     NW 2004s SR1 Presentation - MaxDB Release 7.6.00
50078731_4     NW 2004s SR1 Presentation - 6.40 Compilation 5 Present. 1/3
50078731_5     NW 2004s SR1 Presentation - 6.40 Compilation 5 Present. 2/3
50078731_6     NW 2004s SR1 Presentation - 6.40 Compilation 5 Present. 3/3
50078731_7     NW 2004s SR1 Presentation - Server Components Compilation 5
50081125     CD SAP License Keys & License Audit
51013953_1     R/3 4.6C SR 2 Export CD 1
51013953_2     R/3 4.6C SR 2 Export CD 2
51013953_3     R/3 4.6C SR 2 Export CD 3
51013953_4     R/3 4.6C SR 2 Export CD 4
51013954_1     R/3 4.6C SR 2 Language CD 1
51013954_2     R/3 4.6C SR 2 Language CD 2
51013954_3     R/3 4.6C SR 2 Language CD 3
51013955     R/3 4.6C SR 2 Language JA
51013957     CD 4.6C SR2 Language TH
51013998     R/3 4.6C SR 2 Language ZF
51018621     CD mySAP.com 4.6C Language Romanian
51019432     CD Oracle9i Database Onl. Docu. 9.2
51019883     CD 4.6D SAP Kernel ORACLE NT/IA64
51020564     CD 4.6D EXT Kernel ORACLE NT,AIX,HP-UX
51030122_1     Oracle 9.2 NT 1/3
51030122_2     Oracle 9.2 NT 2/3
51030122_3     Oracle 9.2 NT 3/3
51030122_4     Oracle 9.2.0.4.1 NT
51030122_5     Oracle Failsafe 3.3.2 NT/Intel
51030123_1     Oracle 9.2 NT/IA64 1/2
51030123_2     Oracle 9.2 NT/IA64 2/2
51030123_3     DVD ORACLE RDBMS 9.2 NT/IA64
51030123_4     DVD ORACLE RDBMS 9.2 NT/IA64
51030123_5     Oracle Failsafe 3.3.2 NT/IA64
51031095_1     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 1 von 12
51031095_10     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 10 von 12
51031095_11     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 11 von 12
51031095_12     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 12 von 12
51031095_2     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 2 von 12
51031095_3     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 3 von 12
51031095_4     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 4 von 12
51031095_5     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 5 von 12
51031095_6     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 6 von 12
51031095_7     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 7 von 12
51031095_8     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 8 von 12
51031095_9     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 9 von 12
51031592     CD SAP R/3 4.6C SR2 Language KO
51031593     CD SAP R/3 4.6C SR2 Language ZH
51031614_1     Oracle 9.2 Patch Set 7 AIX 64 64Bit
51031614_2     Oracle 9.2 Patch Set 7 Tru64 64Bit
51031614_3     Oracle 9.2 Patch Set 7 HP-UX PA-RISC 64Bit
51031614_4     Oracle 9.2 Patch Set 7 Linux I386 32Bit
51031614_5     Oracle 9.2 Patch Set 7 WIN I386 32Bit
51031614_6     Oracle 9.2 Patch Set 7 WIN IA64 64Bit
51031614_7     Oracle 9.2 Patch Set 7 Solaris 64Bit
51032345     Supp.Pack.Coll. 4.6C-47x200 2006/12
Regards.

Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
Hassan

You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet.

Macbook Air: Problem to install a Ethernet USB (model A1277)

Problem to install a USB Ethernet Model A1277 to MacBook Air (release 10.7.2)

I ended up taking my Air to the Genius Bar to get it fixed. The tech deleted the /System/Library/<something> which forces a rebuild upon reboot. That didn't fix it.
Reinstalling Lion from the recovery partition did fix the issue. There are other threads on this topic in the forums.

Problem in installing Forms 6 on Windows 2000

I have problem in installing forms 6 on windows 2000.
Please advise me.
null

Hello,
I've been using Dev 2000 ver 6i for several months sucessfully on Win 2K RC2. The compiled .fmx's work fine with the ver 6.0 runtime environment under NT 4.0.
The only problem is that the Forms Server won't work till the 1st patch set comes out
(only Oracle knows when!) , so you can't test or deploy the forms as web apps on Win 2K yet. OAS 4.0 appears to work ok on Win 2K.
I have been using the Beta version of Dev 6i and will upgrade to the release version eventually, probably when the patch comes out.
null

Problem in installing BPEL Designer 2.2 for eclipse

Hi,
As I said it in the topic, when I want to install the plugin "Oracle BPEL Designer 2.2" for eclipse, I got an error message
" The version of the eclipse platforms installed in C:\Program Files\eclipse must be at least 3.0 (release)"
My problem is that I have installed eclipse 3.1 ...
If you have any idea...
Thanks in advance,
Rardo

oups...
sorry, I have just seen that there is the same topic here : More eclipse designer install problems

Problem with installing and uninstalling applicati...

hi all,
I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
Regards
Alex

You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.

Problem with installing Elements - from noob

I have problems with installing Elements, it gives my an unknown mistake - I already have CS4 up and running, could this be the case?

Chances are not very good that pse 4 will run on os x 10 6.8 unless you were upgrading from an earlier mac version that already had pse 4 installed.
as per this:
http://forums.adobe.com/message/4474236#4474236

Problem with installing patch SP1b

Hello All,
I have a development server running on XP pro with live cycle 8.0.1. I 'm facing a problem while installing patch SP1b to that server. I have attached the log file.
My problem is
I copied a process' .lca file from a server running on windows server 2003 with patch installed and deployed on the development server. Now in my development XP box, workspace is opening but when i tried to open the process, before rendering the pdf form it is giving "An error occurred during the operation (endpoint id 401). (ALC-WKS-007-027)" error. I have even crosschecked the input xfaform variable also; every thing is perfect. The details are as below:
The Server from which i copied is: (windows server 2003)
License Type: Full Version: 8.0.1
Patch Version: SP1b
Expired Date: Not Applicable
Installed Components
Product
Version
Patch
License Type
LiveCycle Process Management ES
8.0.1
SP1b
Full
LiveCycle Forms ES
8.0.1
SP1b
Full
The server to which i deployed is: (xp pro)
License Type: Full Version: 8.0.1
Patch Version:
Expired Date: Not Applicable
Installed Components
Product
Version
Patch
License Type
LiveCycle Process Management ES
8.0.1
Full
LiveCycle Business Activity Monitoring ES
8.0.1
Full
LiveCycle Forms ES
8.0.1
Full
Will that patch version could be the problem? What could be the problem and what is the solution?
Thanks
Deepak

Anybody knows the answer?

Problem with installing iTunes

So these are my problems with installing iTunes.
At first it was :
A required iTunes component is not installed.Please repair or reinstall iTunes (-45019)
Then it got worse as it would not even open and these would appear:
The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem.
and this would appear:
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
I reinstalled maybe about 5 times or more...
If I thought I solved the above problem, this would appear:
iTunesHelper.exe is not installed on my computer.
I seen other people comment that you should unistall and restart the computer and install the setup again, but it does not work..
And others would say to repair the AAS or iTunes etc..
And after trying all these it does not work???
What else works?

I also tried repairing the Microsoft NET.

Problem with Installing Nokia Ovi Store in E51

I am having problem with installing nokia Ovi store in my E51. Whenever I try to download Ovi store from my E51, it shows a error message that the component is built in and cannot be installed. I dont know wat to do now. Can anyone please give me some advice. Thanks in advance.

Hi there!
This means that the Ovi Store is currently installed in your E52 phone, what I can suggest is try checking under Application Manager > Installed Application, check if the Ovi Store is there. If you can't see it, try to perform the soft reset (press *#7780# on the main screen of the phone and it will prompt you restore all original phone settings? phone will restart. Press YES and it will ask you for the lock code 12345.) If anything else please reply to this message.
Hope tis' Help!
"If you think this post is helpful, please click on the green button"

Problem with installing CUCM on MCS-7816-I5

Hi to all.
I have a problem with installing CUCM 8.6.1 on new MCS-7816-I5 (IBM) hardware. The problem is that installation loops in restart after upgrading MCS firmware. Actualy, installation does not sucessfully upgrade firmware, so every time it detects old firmware and trying to upgrade it.
I also tried update MCS firmware with downloaded Firmware Update Utility 3.6.5 CD from Cisco downloads, but it also fails.
Does anyone have idea what's going on? Is this a Cisco failure or IBM server failure?
Here is some details from log file generated with this Firmware Update Utility 3.6.5:
==============
Initial Selection
Machine Type: 4251 OS: SLES 10 Arch: 64 bit
IsPartition: 0
Update:   IBM System x uEFI update for x3200 M3 /3250 M3
Severity: Critical
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_uefi_gye142a_linux_32-64 Requisite:None
Version: 1.08 (GYE142A)
Install: 1.06 (GYE135A)
Select:    Yes
Update:   IBM Dynamic System Analysis
Severity: Recommended
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_dsa_3.20_dsyt75x_linux_32_64
Requisite:None
Version: 3.20 (DSYT75X)
Install: 3.01 (DSYT60K)
Select:    Yes
Update:   IBM Online SAS/SATA Hard Disk Drive Update Program
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_hdd_sas-1.08.01_linux_32-64
Requisite:None
Name:     WD2502ABYS-23B7A0 (/dev/sg0)
Version: 02.03B07
Install: 02.0
Select:    Yes
Update:   Integrated Management Module Update
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_imm_yuoo84c_linux_32-64 Requisite:None
Version: 1.22 (YUOO84C)
Install: 1.10 (YUOO57H)
Select:    Yes
IBM Command Line IMM Flash Update Utility v1.05.03 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
LAN-over-USB device not configured.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 3
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
(C) Copyright IBM Corp.2010. All Rights Reserved.
FdrvWL -- Flash Drive(s)                                     3.10.08.19
   1 Ada:0 SID:0   PN:44E9172:42C0463 SN:1J242783 FW:02.03B07              T:13 FW:Ok
AdaNbr(Type)      DevFnd Flashed(SAS SATA) NbrFailed
0(onBoard)           1       0   0    0          0
                       1       0   0    0          0 Error(s)
Update completed successfully. <-- THIS SUCCESS, BUT EVERY TIME IT UPGRADEING AGAIN FROM OLD VERSION, LIKE NEVER REALY UPGRADED TO NEWER VERSION
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
===========================
Thanks,
Sinisa.

Hi Sinisa,
It almost sounds like this bug;
CSCtn81201
Incorrect "Hardware Configuration Error" due to hardware setup errors
Symptom:
Refresh upgrade stops with IMM device detection, and then server being reported as unsupported
Conditions:
in-band USB interface was disabled, which is configurable via IBM system X or IMM (browser) interfaces.
Workaround:
change the in-band usb interface settings to enabled.
Related Bug
Status
Fixed
Severity
4 - minor
Last Modified
Aug 17,2011
Product
Cisco Unified Communications Manager (CallManager)
Platform
Dependent
Technology
nav
1st Found-in
8.6(0.99081.3)
Fixed-in
8.6(1.96000.1), 9.0(0.95070.38), 9.0(0.95070.39), 8.6(1.99989.1), 8.6(1.95050.1), 9.0(0.96000.1), 8.6(1.97011.2), 8.6(1.95190.40), 8.6(1.97011.1), 8.6(0.95180.9), 9.0(0.95010.1), 8.6(1.95020.1), 8.6(1.95040.1), 8.6(0.98000.50), 8.6(0.98000.17), 8.6(0.99981.2), 8.6(1.10000.1), 8.6(1.99986.1), 8.6(1.95020.58), 8.6(1.96000.51), 8.6(1.10000.43)
Cheers!
Rob

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

Severe problem with installing and starting Audio-DVD Pla

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

6i release 4 problem to install

Similar Messages

Maybe you are looking for