6th Gen iPod won't stay in standby

I have a 6th gen iPod classic that I recently resurrected by installing a new battery. I also restored the firmware via iTunes after replacing the battery. I can pause playback and the backlight times out OK but it "wakes up" about 30 seconds to a minute later. This continues to repeat and drain the battery. I have tried forcing it into standby (holding play/pause) and engaging the hold switch to no avail. It seems that if I keep it docked to one of my speaker units it sits and charges and behaves. What could cause this?
Thanks,
Joe

Hello jfusco,
It sounds like something may have been misseated when you replaced the battery putting extra pressure somewhere on the inside of the iPod causing it to come out of sleep.  Double check to make sure everything is as exactly as it should be.  Not really much else for suggestions at this point.
B-rock

Similar Messages

  • TS3474 6th gen iPod won't charge.

    I want to return my 6th gen iPod. Tried every fix.

    Schedule an appointment at your local Apple Store or Authorized Apple Reseller to see if there is anything else they can do to help.
    B-rock

  • 6th gen ipod won't play songs in order?

    My 6th gen ipod, The little square one,
    I have playlists, but it does not play the songs in order - so why even have a playlist? Did something in the updates to iTunes change this? Plus there are no settings either in my iTunes which is up to date on my iMac (Maverick 7.1.1) which allow my to assk for this when syncing nor is there an option on sad little gen 6th. (I soooo regret I wore out the battery on my gen 5 nano).
    Anyone?
    Thanks!

    Hey esmeglass!
    Is it possible that you simply have shuffle turned on while playing your music? Try using the user guide for your iPod, found below, to determine if shuffle is turned on and how to turn it off:
    manuals.info.apple.com/MANUALS/1000/MA1551/en_US/iPod_nano_6thgen_User_Guide.pd f
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • IPod won't stay in standby mode

    When I turn off the iPod by holding down the play button, it does go into standby mode, but only for a very short time.
    But if it's off for more than a few minutes, it always restarts whenever I turn it back on, meaning it shows that apple logo for quite a while, and starts at the main menu.
    It's not a huge problem, but I think it's very annoying, and I really miss the standby mode from my previous iPod (also an iPod Classic, it was sent to repairs and I got a new one back - if this one is faulty as well, I'm gonna be really ****** off with the quality of these products)

    The alarm-clock might be turned on, try to turn this off.

  • ITunes 11.1.5 won't sync podcasts to my 6th gen ipod nano--how do I fix this?

    iTunes 11.1.5 won't sync podcasts to my 6th gen ipod nano--how do I fix this?
    Until a few months ago, my iTunes had no problem syncing podcasts to my 6th gen ipod nano. Since an update in the iTunes software version (not sure which version), iTunes just won't sync podcasts to the nano. No other changes have occured and only podcasts are affected.
    What's going on? How do I fix this?

    I had the same problem with my nano when I updated to itunes 11.1.5. It seems that the update does not transfer all of your podcast download preferences. Open itunes, select "Podcasts" from the drop down box in the upper left of the screen. The next screen will give you an option to select "My Podcasts" (top center). This will bring up a list of your podcasts on the left. Right click on one and select "podcast settings". This brings up a settings box on the upper right (this is a new variation) with your current download settings for that podcast. The download setting on mine had defaulted to "off" on all of my podcasts. I just reset them to "all episodes" and all is good.
    Hope this helps.

  • My 6th gen Ipod nano does not show up in Itunes or in My Computer

    I do not think that this is a problem with my computer because I own an older 5th gen nano and have never had problems with it before. Both my computer and Itunes has no problem seeing the older Ipod right now. I have followed the troubleshooting guides and I'm still stumped on why my new Ipod won't appear. I've read several disscussions and haven't found the fix yet. My newer Ipod has been connected to another computer before but I don't know whether it was a Mac or a PC, and I believe that is the problem. I was thinking maybe it would help if I completely reset my Ipod, I don't mind losing any music, but I have no idea how to if I can't connect it to my computer. Please tell me how to reset it to facory settings or if you think that something else will work I'm completely willing to try that too. Thank you.

    Thanks for a reply
    The cable that I'm using came with my 5th gen nano. The 6th gen Ipod shows that it's connected but the computer doesn't see it, so I don't think that it's the cable.
    I did try this before when looking at the troubleshooting guide and nothing happens. It just resets and then the Ipod screen tells me that it's connected to the computer. It still is unseen by Itunes and no where to be found in my computer.
    I don't have another computer to plug it into at the moment but I may be able to visit a friend that owns a decent PC in a few days. If that doesn't work out I will be getting a new lap top in a week and I'm hoping that it will work on that, but it won't be a Mac. So, let's say it works when I plug it into one of these computers, should I reset my Ipod from there or is there something else I should do?

  • 6th gen ipod nano not recognized by itunes on my PC (Windows 7). tried everything to fix, but still not working... please help

    I have a 6th gen ipod nano that is not recognized by itunes on my PC (Windows 7). I get an error that it 'could not be identified properly'. I have tried all tips on the apple site to correct the problem, including unistalling and reinstalling itunes twice. Nothing works. Has anyone tried something that worked that is not part of the Apple support page (http://support.apple.com/kb/TS3218)? Thank you in advance for any help!

     
    gltg wrote:
    Running Windows XP professional SP3 and itunes 10.2.
    I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes
    I have spent 3 days messing with my pc and have made no real progress.
    Then it's time to call Apple tech support while you are still under warranty.  Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.   If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

  • My 32GB 5th gen iPod won't sync

    My 32GB 5th gen iPod won't sync. There is still over 10 GB free and my itunes is only 17 GB yet it won't let me sync anything. Can anyone help?

    My ipod 32gb 5th gen will not sync to itunes or any mac computer. An error message appears saying that my ipod touch requires itunes ver10.7. Does anyone know how to get this on my ipod touch 5? I cannot find it, does it need to be installed onto my ipod from a computer?

  • TS1538 I have 6th gen iPod nano.  When I try to sync it my computer tells me it has malfunctioned and Windows does not  recognize it.  My iPhone syncs fine so the problem must be the iPod.  I have reset the iPod several times and no luck.  Any suggestions

    . I have 6th gen iPod nano.  When I try to sync it my computer tells me it has malfunctioned and Windows does not  recognize it.  My iPhone syncs fine so the problem must be the iPod.  I have reset the iPod several times and no luck.  Any suggestions?

    Hello Alexdad,
    We've an article that can help get your iPod Nano working with your computer.
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/TS3218
    Cheers,
    Allen

  • I have a 6th Gen ipod nano. Is there a compatability problem with Windows 8.1?

    My 6th gen ipod nano is not being recognised in itunes. I have tried all the suggestions in the itunes troubleshooting section without success. I am running Windows 8.1 , is there a chance of an incompatability problem here?

    I have tried all the suggestions in the itunes troubleshooting section without success.
    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Has anyone had a problem with low battery capacity on the 6th gen ipod nano?

    I got my dad a 6th gen Ipod nano for his birthday and he is complaining about very low battery power and i was wondering if other nano users were experiencing this problem

    Samething here.  I got my ipod nano on Christmas 2010 and I always thought that it did not have the 24 hours music playback capacity.  This week I had the ultimate test.  I had to go the hospital and knew I would be waiting a long time. I fully charged my ipod nano (3 hours connected to my computer)... then, I turned it on at 11:30 in the morning and I played the radio non-stop until 5:30 PM when it just stopped working.  That's 6 hours of music playback, not 24...
    Is there something I should know about the battery and how to charge it to maximise music playback??

  • 6th gen ipod nano serial number not being recognised by support

    I have just tried to register my 6th gen ipod nano on Apple's website and I get a message that says the number is not recognised, recheck and try again.  At first used number from nano box, then tried again after connecting nano to computer (same number appears of course) but still not being recognised.  The fact that the serial number is not being recognised is not helpful when you need help from support as they also require this information before they will contact you.  Why is my nano's serial number not being recognised?  More to the point, how do I get apple to recognise it?

    Are you sure aren't mistaking I's for 1's or O's of 0s?
    If you head to Settings - General -> About, does it list the same serial # there?
    B-rock

  • My 6th gen ipod is going to sleep after 1 min

    since i installed the version 1.1 for my 6th gen ipod nano
    the unit goes into a "sleep mode" after around 60 secs?
    any ideas or suggestions for a setting change?
    thanks,
    richww

    I'm having the same problem. Have you had any luck since you posted your question?

  • Can i use any headphones into a 6th gen ipod nano? and how loud does the volume go without headphones? - maybe in comparison to an ipad?

    Can I use any headphone with a 6th gen ipod nano? How loud is the volume without headphones? - in comparison the the ipad

    Here's a selection:
    http://store.apple.com/us/browse/home/shop_ipod/ipod_accessories/headphones#m.ip odCompatibility=ipodnano

  • How do I get my windows 8 computer to recognize my 6th gen ipod nano

    how can i get my windows 8 computer to recognize my 6th gen ipod nano?

    Hello Warren,
    Thank you for the details of the issue you are experiencing with your iPod nano.  It sounds like your iPod nano is not being recognized in iTunes on your Windows computer.  I found an article with steps to address this:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • How can I change the iPhone backup location on my Mac to an external hard disk?

    Thank you.

  • I have a syncing problem!Help please!

    Today when I tried to download a podcast, a message saying "The iPod cannot be synced.The disk could not be read or written to", appeared.I had no previous problems syncing anything on my iPod.This is the first time I've had problems with my iPod.Not

  • Moving high resolution images from PSE6 to Premiere Elements 4

    I am trying to take a pdf map (happens to be of the San Diego Zoo) and insert it into a Premiere Elements 4 (PE4) project to show where we went in the Zoo and then show our family pictures/video in that area So I bring the pdf map file into PSE6 and

  • 11g Release 1 Patch Set 3 (WLS 10.3.4)

    Hi. While creating new server in OEPE Helios(11.1.1.6) I found that WLS 10.3.4 is available for selection. However I didnt find any information neither links to download it. Only 10.3.3 is available. When and where it is\would be available for downlo

  • Controlling

    Dear Friends,                    while doing MB1c system is throwing the following message::Account xxxxxxx requires an assignment to a CO object::Any clue please... Thanks&regards Eliaz