6th gen nano recognized in Windows but not iTunes - I've tried the support tips, nothing has helped.

Why is this not an easy fix???  Very frustrated.   Thanks.

It looks like a lot of questions get asked here - but none get answered...  I am BEYOND frustrated at this point.  What do you have to do to get some help around here??????????

Similar Messages

  • Nano recognized by windows but not iTunes

    When I connect my nano to my computer it is recognized by windows so I can edit things like the calendar but when I go to iTunes to update music it isnt recognized as even being connected to the computer by iTunes. First I tried restoring it because Ive had problems that have been fixed by that before, but it didnt work. I downloaded iTunes 7 but it still isnt recognized. Now I have a nano that has no music on it and cant be updated because iTunes doesnt recognize it. What can I do!!!???

    I got mine working, i'm not sure if it was by coincidence or what. But what I did was close out of itunes and unplug the ipod. I disabled my wireless network on my laptop and pluged in the ipod, and boom itunes was like, oh yeah now i can find the ipod. So I didn't know what to think about that, so i went over to my desktop and yanked out the network cabled, plugged in the ipod and now it reconizes the ipod too, which it wouldn't do earlier either. I have no idea what's going on there. Maybe you can try that and see, it somehow worked for me.

  • TS1567 Iphone is recognized in windows but not itunes 11

    Iphone is recognized in windows but not itunes 11

    Use the article for this issue
    http://support.apple.com/kb/TS1538

  • New IPhone 5 is recognized by Windows but, not ITunes.

    IPhone 4S sync'd no problem with my laptop.  New IPhone 5 is recognized by Windows but, not ITunes.  ITunes has been updated, worked with Apple support for 2 hours this morning, still an unresolved problem.  Also, phone does sync on other computers.

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    -Griff W.

  • 6th gen nano appears on desktop but not in itunes

    6th gen nano appears on desktop when I plug it in, but not in itunes.  I've never set my ipod to disk mode.  It never did this before, why all of a sudden? Having the same problem when I plug my girlfriends nano into my computer too.  Any advice?  Both my OS and iTunes are at the most up to date versions.
    Thanks, Matt

    Thanks for the response... that still didn't work for me but this latest iTunes update seems to have fixed the problem!

  • My ipod is recognized by windows but not itunes

    Ok, I had trouble with my 4gb black nano when I had to install it, i used TrevorQ's tip and it worked.
    Now I need to update some songs on my ipod and it wont recognize it now
    6.05.20 Itunes
    2006-03-23 Ipod Updater
    I cant end the "IpodService.exe" process

    See if anything here helps: iPod shows up in Windows but not in iTunes

  • Ipod is recognized by windows but not itunes

    i got a 4gb nano and when i connect my ipod to my computer it dosnt show up in itunes i reinstalled everything but it still wont work

    hiya!
    okay, we'd better check through the usual suspects:
    iPod for Windows: Fast user switching in Windows XP is not supported
    iPod shows up in Windows but not in iTunes
    love, b

  • Has anyone got 7th gen nano recognized by Windows 8 and itunes

    Has anyone anywhere got I tunes and Windows 8 to recognize and accept  the new 7th gen Ipod Nano. Microsoft says it is not compatible. Bought new nano, threw away the box like an idiot, and now have something that doesn't work. I've tried the lists.

    Hi monte951,
    If you are having issues with your iPod Nano not being recognized by iTunes on your Windows machine, you may find the following article helpful:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Regards,
    - Brenden

  • IPod Mini is recognized by Windows but Not iTunes

    my ipod mini is set to update automatically with itunes, but the other day it stopped. I was using iTunes 4 but upgraded to 6 yesterday, still no luck. My mini is not recognized by itunes. I then uninstalled the iPod updater and then reinstalled it. Then, when i reconnected the iPod, a box poped up and said "Mike's iPod" (calendar, contacts), but still nothing in iTunes.
    I tried to reset it, no luck
    Tried to upgrade iTunes, but ipod is still not recognized
    Tried uninstall & reinstall of Updater, no luck
    This has been going on for a week now. If anyone can help, PLEASE DO!!!
    Thanks!
    -Mike
      Windows XP  

    Tried here?
    http://docs.info.apple.com/article.html?artnum=93716

  • TS1538 Running Windows XP,Ipod Mini works fine,but Ipod Nano visible in Windows,but not Itunes.Have loaded latest version of ITunes.How do I prceed

    Am running Windows XP pro,Ipod Mini works fine,but Ipod Nano is visible in my computer as a mass storage device,but not in Itunes.The settings on the Ipod says Version 1.0.2 Mac.Have tried all the trouble shooting solutions under Itunes help,but no success.Is it a problem with the Ipod or my Windows computer?Please help.Thanks Marcus.

    http://support.apple.com/kb/TS1363

  • Re: ipod touch 4th gen. iPod appears in windows but not itunes

    it works on others computers but not my own. how can i get my itunes to recognise my ipod? i went through the troubleshooting assistant and it still doesn't work

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store. A warranty is not necessary.
    Apple Retail Store - Genius Bar

  • IPod nano recognized in Windows but not in iTunes

    My iTunes won't recognize my iPod. And this message always pop-up : iTunes cannot read the contents of the iPod nano.Please use the iPod Software Updater application to restore the iPod to factory settings.I read the manual, but I just can't find anything about restoring to factory settings !?!? I'm new to iPod and I'm begining to lose interest for my iPod nano !!!!

    Found another, this one seems to be just right for you!
    iPod appears in Windows Explorer but does not appear in iTunes
    Just for a heads up, try typing into the search field the error message you get, sometimes it has an article on it.

  • TS1538 iPhone 4S recognized by Windows but not iTunes.

    I have been trying to sync my iPhone 4S. I connect to my WIndows 7 laptop and the PC recognizes it, but iTunes won't start. I manually started iTunes and, before I even connect to the PC, iTunes tries to sync and then I get an error that says it can't connect and that I need to restore my iPhone. My iPhone is working perfectly. I followed the direction in the troubleshooter and uninstalled and then reinstalled iTunes. I rebooted several times. No change. The very same thing happens. I also checked that the correct services are runniing and stopped/started them. Don't know what to do now. Any help would be greatly appreciated.

    Make sure both iTunes and your iPhone are up to date.
    Also easiest way to find what device is causing the issue is by connecting the iPhone to another pc/mac that has iTunes but do not sync. If the iPhone can be recognised on another computer then it is an issue with your computer and vice versa.

  • My iPod is being recognized by Windows, but not iTunes!!!

    The Subject says it all....

    Do a reset (make sure you see the Apple logo) while it's plugged in to the computer.
    That's the 'starting place'.
    And you're not doing a reset if you don't see the Apple logo, BTW. It's not easy to do. If you don't know how to do a reset, you can find directions by doing a quick search of this forum, or doing a quick review of the manual that came with your iPod.

  • IPod is recognized in Windows, but not in iTunes.

    Ive followed the support site on what to do if the iPod is recognized in Windows but not iTunes... but to no avail.
    ive had a 20GB photo thats been working o.k. (need to send it in) but now neither it nor my new 30GB Video will appear on iTunes... just in windows.... any suggestions? or should i just call up apple...
    p.s. i know its not the iPods cause they update fine on my sisters laptop...

    Does it say Cannot Mount iPod?
    Is the software on your computer up to date? You may want to try reinstalling it as well...
    iTunes
    iPod Updater
    Update iPod's Software
    Also, try right clicking on the iPod (in My Computer) and go to format. Does anything happen?
    btabz

Maybe you are looking for

  • Can't open .jar file, says it cannot be launched, Help?

    I'm trying to download this mod for a game called minecraft. It involves opening a jar file to begin the installation, but everytime i click on the jar file it comes up with this message: The Java JAR file "YOGBOX Installer.jar" could not be launched

  • Help! Network Nightmare

    Hi. I'm living in an old office building with a lot of other people. We have a cable modem in the basement which feeds ethernet to a router upstairs, and that router feeds two others. At any given moment the system might have as many as 8-10 users. V

  • Receiving ORA-01465: invalid hex number when using HEXTORAW

    I'm trying to use hextoraw to convert a value in a CSV file read from an external table. Works on some systems and not on others. Is there a way that I can avoid this or program around this? Any ideas what the problem is? It fails with an "invalid he

  • Merge data creating duplicate listings

    I have a csv database with about 580 records. I've created a template with the correct fields in inDesign, loaded the csv file using merge data, then created the merged document. I get 580 listings of one item like the image below. If there is an err

  • At the moment to compile i have a error

    the error that send me is Note: uses or overrides an deprecated API. why... what can i do...