7.0.116.0 vs 7.0.116.0-ER

Anyone know the difference between these 2 WLC versions? I did a search in the release notes and 7.0.116.0-ER isn't even mentioned.

Not sure this upgrade is a big need.
You mean the "ER"? I beg to reconsider. The "ER" may not read like a Frederick Forsythe thriller novel but it's very important that you load this bootstrap because there are things the firmware can't do and that's fix some bugs in the bootstrap which the "ER" was meant to do.

Similar Messages

Qosmio G30-116: How to connect the Sky Digital box to watch TV?

I just recently purchased the Qosmio G30-116 on the understanding that I can connect my Sky digital to the laptop (somehow) and watch and record sky on the laptop
* note: I am not using freeview or normal TV I am using SKY DIGITAL *
usint the supplied converter cable to connect to the video-in on the laptop (video in is like a headfone jack and the converter converts from this to female RCA)
I have plugged it into the laptop then connect a 3 RCA to SCART to it and then into the sky box, when setting up the TV section in Windows Media Centre I follow the instructions until it gets to the point where it scans for a signal, (previous to that I get asked what kind of signal I receive, I select digital but have tried all combinations,) but it doesn't find a signal.
Now I have been told that Windows Media Centre does not support Analogue input and that the connection between the sky box and the laptop is analogue.
Is this correct or not? then, while typing this I have been told by someone else that my laptop is not capable of receiveing SKY DIGITAl as it can't decode it or something. Is this also correct? If not, what am I doing wrong and can anyone help me get this going? And have I been going about this the right way or am I totally up the wrong path if laptop is capable of it?

To start qosmio player
1.switch off computer using on/off blue lit on/off button to close windows operation.
2.make sure that the computer/windows is switch off
3.Now Touch the TV icon (Blue lit button)only or the DVD player ICOn (blue lit button)only. WITHOUT USING THE USUAL ON/OFF SWITCH
4.The qosmio player/engine will switch on instantly without booting windows.
5.TV will launch within 8 seconds and the same for DVD player
6.Pres F1 or F2 for further functions such as screen size,audio,forward.rewind.pause scanning the TV channnels (auto or manual)
7.You can do the same i.e open the qosmio player/TV with the supplied Toshiba/qosmio remote pressing the Live TV button ONLY for instant TV on or DVD menu ONLY for instant DVD player/CD player on WITHOUT USING THE ON/OFF SWITCH ON THE REMOTE.That is very much similar to a standard TV remote just press the TV or dvd menu .
8.If you touch the same icon buttons i.e TV and dvd player during the standard computer usage /windows operating system,IT WILL LAUNCH THE MEDIA CENTER BY DEFAULT.that's what happen to you!
I use the remote from my bed before going to sleep and the same from bed to watch early morning TV news
Qosmio is excellent for the versatility!
Enjoy
min
Message was edited by: min
Message was edited by: min

Report Error only for some users - Unsupported RPL stream version detected: 101.116.1047292257. Expected version: 10.6.

Hi,
We have certain SSRS report (which includes subreports) which
many users are able to access, but
some users cannot access- they get this error:
"Unsupported RPL stream version detected: 101.116.1047292257. Expected version: 10.6."
(We are not using SP integrated mode)(using SSRS 2008 R2)
No problem in VS or on server when trying to run this report.
User having this problem has the sam ewindows and explorer versions.
Please advice
Namnami

have the user clear their temporary internet cache
How?
Another detail- on the problematic user's computer if I run the explorer using my credentials, the report runs fine.
Thanks
Namnami

I'm using ezcap.tv 116 ezgamer capture card to record my PS3, this is on a windows laptop, Im then moving the recorded videos in mpg format over to my MacBook Pro to use IMovie to edit them to upload to youtube but it won't let me import them.

I'm using ezcap.tv 116 ezgamer capture card to record my PS3, this is on a windows laptop, Im then moving the recorded videos in mpg format over to my MacBook Pro to use IMovie to edit them so i can upload them to youtube but it won't let me import them, even after changeing them to MP4 format, it just comes up with the message: "No Importable Files None of the selected files or folders can be imported. Change the selection and try again."
Ive even tried opening in itunes and copying from thier but they wont open in Itunes, no message or anything they simple just dont open. its strange because it does open in quicktime player.
please if anyone has any ideas that can help me please let me know XD thanks.

First problem: You're fine. The hotter it gets, the more the fans spin up. The computer is designed so that at max load, at max fan speed, it won't overheat (unless it's obstructed by something, e.g. sitting on your bed swallowed by a comforter). It's not the best thing to keep it that toasty for days at a time, but a couple hours at a time shouldn't be a problem.
Second problem: If something in the trash won't delete, just use Secure Empty Trash and it should be fine. Since .torrent files are quite small, it should only take a couple seconds.

Cisco AIR-LAP1041N-E-K9 not working with WLC 4402 version 7.0.116.0

Hi All,
appreciate your support for a problem i started facing today. i have a Cisco WLC 4402 running version 7.0.116.0 and it is working great with 25 Cisco 1252 APs. we have recieved a new 20 Cisco 1041N APs today and i installed one in our site but it doesn't work. it worked fine and loaded the image from flash and got the WLC ip address through DHCP option and started showing the below error:
*Mar 1 00:00:10.021: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:10.033: *** CRASH_LOG = YES
*Mar 1 00:00:10.333: Port 1 is not presentSecurity Core found.
Base Ethernet MAC address: C8:9C:1D:53:57:5E
*Mar 1 00:00:11.373: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:11.465: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1088 messages)
*Mar 1 00:00:11.494: status of voice_diag_test from WLC is false
*Mar 1 00:00:12.526: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:13.594: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:13.647: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1040 Software (C1140-K9W8-M), Version 12.4(23c)JA2, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 13-Apr-11 12:50 by prod_rel_team
*Mar 1 00:00:13.647: %SNMP-5-COLDSTART: SNMP agent on host APc89c.1d53.575e is undergoing a cold start
*Mar 1 00:08:59.062: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:08:59.062: bsnInitRcbSlot: slot 1 has NO radio
*Mar 1 00:08:59.138: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:08:59.837: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:09:00.145: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:09:09.136: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 172.16.26.81, mask 255.255.255.0, hostname APc89c.1d53.575e
*Mar 1 00:09:17.912: %PARSER-4-BADCFG: Unexpected end of configuration file.
*Mar 1 00:09:17.912: status of voice_diag_test from WLC is false
*Mar 1 00:09:17.984: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:09:19.865: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:09:19.886: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:09:20.873: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:09:20.874: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
Translating "CISCO-CAPWAP-CONTROLLER.atheertele.com"...domain server (172.16.40.240)
*Mar 1 00:09:29.029: %CAPWAP-5-DHCP_OPTION_43: Controller address 172.16.100.102 obtained through DHCP
*May 25 08:27:02.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:02.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:03.175: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:03.177: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:03.177: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:03.329: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:03.333: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:03.333: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:03.333: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:03.378: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:03.378: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:03.378: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:03.448: status of voice_diag_test from WLC is false
*May 25 08:27:14.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:14.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:15.185: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:15.186: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:15.186: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:15.330: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:15.333: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:15.334: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:15.334: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:15.379: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:15.379: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:15.379: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:15.450: status of voice_diag_test from WLC is false
*May 25 08:27:26.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:26.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:27.182: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:27.183: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:27.184: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:27.329: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:27.333: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:27.333: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:27.333: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:27.377: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:27.377: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:27.377: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:27.433: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*May 25 08:27:27.446: %PARSER-4-BADCFG: Unexpected end of configuration file.
*May 25 08:27:27.447: status of voice_diag_test from WLC is false
*May 25 08:27:27.448: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*May 25 08:27:27.456: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*May 25 08:27:38.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:38.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:39.183: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:39.184: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:39.184: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:39.326: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:39.329: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:39.329: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:39.330: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:39.375: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:39.375: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:39.375: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:39.446: status of voice_diag_test from WLC is false
*May 25 08:27:49.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:49.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:50.179: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:50.180: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:50.180: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:50.323: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:50.326: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:50.326: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:50.326: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:50.370: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:50.370: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:50.370: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:50.425: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*May 25 08:27:50.438: %PARSER-4-BADCFG: Unexpected end of configuration file.
i searched for the regulatory domains difference between AIR-LAP1041N-E-K9 and AIR-LAP1041N-A-K9 and didn't find any difference that may affect the operation of this AP.
just to mention that our configuration in WLC for regulatory domains is:
Configured Country Code(s) AR
Regulatory Domain 802.11a: -A
802.11bg: -A
My question is, should i only include my country in the WLC (IQ) to add the requlatry domain (-E) to solve this problem? or changing the country will affect the operation of all working APs??
Appreciate your kind support,
Wisam Q.

Hi Ramon,
thank you for the reply but as shown in the below link:
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7.0.html#wp233793
the WLC in version 7.0.116.0 supports Cisco 1040 seiries APs.
Thanks,
Wisam Q.

IM - AA - auc / Transaction Type 116 should be divided in 3 parts

We can link all AA transaction types with Cognos flow except for 3 Cognos flows:
300 Acq. Subsidaries
301 Acq. 3rd party
340 Own construction
Why this Cognos flows can not be assigned to AA transaction types:
ERP process of acquiring new assets is using investment module. This means that all acquisitions for assets are first posted on Investment order (measure) and latter settled to assets (monthly settlement on Asset under construction (AUC) and final settlement on fixed asset in use).
Standard Sap functionality always uses only one type of AA transaction to make this settlement.
In the case of settlement to AUC = 116
In the case of final settlement = 331, 336, 338, 339
(in this case we don't have control which one is used). Since transfer of values between AuC and final asset is not reported to Cognos we don't have any GAP (issue) for this.
This means that every acquiring transfer for assets gets 116 AA TTY. For the Cognos reporting this transaction should be divided in 3 parts:
1. Acq. Subsidaries
2. Acq. 3rd party
3. Own construction
Way to fill the gap :
Enhancement should be developed which should substitute AA TTY 116 with appropriate AA TTY.
This can be based on the type of posting posted to Investment order.
For the Cognos flow 301 Acq. 3rd party:
This posting can be identified in the following way. Vendor invoice was posted on Investment order for a vendor which is not affiliated company (trading partner field empty). When making the order settlement this posting should get 100 AA TTY.
For the Cognos flow 300 Acq. Subsidaries:
This posting can be identified in the following way. Vendor invoice was posted on Investment order for a vendor which is affiliated company (trading partner field filled in the posting). When making the order settlement this posting should get Z10 AA TTY (this TTY has to be created).
For the Cognos flow 340 Own construction:
This posting can be identified in the following way. The posting did not come to the investment order from vendor invoice posting but from the settlement of production order to investment order. When making the order settlement this posting should get 110 AA TTY. Note: it should be checked if there are also other postings (like Goods receipt, Goods receipt for production order�) that can be posted to investment order as part of own construction and how they can be identified. Perhaps we can just make a rule, if the posting did not come from vendor it is in house production.
Thanks for you help.

look forward to answer

Blue Screen appears on Satellite A500-1DN - BCCode 116

Hi all !
I have got problem with blue screen:
BCCode: 116
BCP1: FFFFFA8007B833E0
BCP2: FFFFF88004C1DF90
BCP3: FFFFFFFFC000009A
BCP4: 0000000000000004
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
I reistalled drivers but nothing changed :/
What is the problem with my computer??

Hi mate
I read a lot about the BSOD and BCCode 116.
Some people said that this is issue could be related to the graphic card driver
Some other people said that this could be a RAM issue
I recommend removing/uninstalling the graphic card driver and to use the Win 7 default graphic card driver for testing purposes.
You should also check if your BIOS is up to date.
If not, make an update.

Qosimio G30-116 with blue screen on boot

I have a Qosmio dule boot Qosmio G30-116, booting in windows generates a blue screen of death, which is quickly cleared before I can read what is displayed.
Boot it in windows safe mode results in a long list of files being displayed the last one being Mup.sys
Booting the machine in Linux and running everything that I can think off does not generate an error.
Running the on board Toshiba dignostics from the BIOS does not generate an error.
Running the linux memory check does not generate an error.
Viewing the file system does not generate an error.
So I don't think I have a hardware problem, I think something is matter with windows
Does anybody have any idea how to stop my clearing the screen so I can actual find out what the problem is ?
There is a lot of valuable software on this machine, I have no desire to trash the entire disk to attempt to repair what seems to be a specfic windows problem.

Hi,
I am sure its not a hardware problem. Its a pure windows related problem but its like one of these bluescreens which try to tell you that your memory is gone. :(
First of all, try to remember which software youve recently installed. Which drivers were updated and how many microsoft KBs were automatically installed.
I would really recommend you to google for "Mup.sys" and check the site "hardwareanalysis" which is the second entry when searching for that term.
This problem has many reasons and there are many different solutions..because the reasons are so different. So, if you want to keep your "valuable" programs and dont want to reinstall your system (what could be btw. the easiest way after backing up your "valuable" software) then check the forum Ive suggested and you will find hopefully the enlightment.
Greets

How can you connect your iphone 5 to your car to listen to your playlist?? I have a BMW ed 116 and there is nothing on the market to solve my problem. Is this a total bad design on Apple or am I just being totally thick! I've searched for every accseserie

Right can anyone please help me!! Why can't I play my playlist from my iphone 5 in my car?? I have a BMW Ed 116 and I have searched the internet for accessories to solve my problem, and had no JOY!!! I listen to my playlists all the time and I'm really disappointed that APPLE have not created anything to resolve my problem.
I'm seriously thinking of sending this phone back, such a disappointment.
PLEASE HELP ME… ANYONE !

Nothing to do with Apple .It is up to BMW to keep up with the comms technology ,they have access to all iOS 7 development as Developers and it is up to them to to provide iDrive updates to keep pace
ps
we are still waiting for the snap in bluetooth cradle for the iPhone5 ,released 12 months ago
If you updatesd OTA I suggest a reset and or a restore through iTunes

Write-read binary file Error 116

Hi all,
I am saving double, numeric array data into a binary file and then trying to read it back but keep on getting Error 116 (cannot read from binary file).
I have attached screenshots of the way I am writing my data into the binary file and then the way I am trying to read it. Basically my data is chunks of 2D double arrays, coming at a rate of 1hz and this is why I have to use the get and set file size functions prior to saving into the file (i.e. so that each time I can append my file with new data).
I have tried all combinations for the write to binary and read to binary file functions, thus meaning I have tried little, big and native endian options but I keep getting the same error. Also played with the way I append my data, i.e. I have used both the "offset in bytes" and "end of file" options, just in case this made any difference, but again no luck.
Any help would be much much appreciated.
Regards,
Harry
Solved!
Go to Solution.
Attachments:
Write_Bin.JPG ‏154 KB
Read_Bin.JPG ‏100 KB

Just as an amendment to my original post, I can succesfully read my data in MATLAB using the standard fread function with double precision. I presume that this means that there is nothing wrong with the way I write the data into the file. However, it would be useful for me to be able to read it directly from Labview without having to build matlab executables etc etc...
cheers again

Qosmio G30-116: Tv tuner chipset on Linux

Hi
I have Linux loaded on a Qosmio 30-116
An LSPCIlists a lists a Conexant device 5b7a, would I be right in thinking that this is a tv tunner ?
The same device is listed at www.pcidatabase.com as 0x5B7A Video,MPEG,Decoder, Multi-Media 0x14F1 Conexant Systems, Inc,
any comments anybody?
Dave.

I am well aware of the orgin of statments such as "Toshiba recommends Microsoft Windows XP"
I was rather hoping for some simple hardware details of the Q30 116 machine, so far I have managed to get both the nvidia and wireless systems working with Linux. Both of which use standard chips. Having found evidence for standard mpeg decoder, I known there is an existing linux device driver for such a chip, I was wondering if this driver could also be used.
Does anybody known if Toshiba release any hardware details ? or if there is is any requriments under EU law to release such details?

Compaq Presario Cq 60 116-ee Os-Xp Built In Webcam Mic doesnt work,,Please Help

Hi
I have a Compaq Presario Cq 60 116-ee Os-Xp
the mic on the webcam doesnt work
can anyone help me with the driver
I would appreciate the help
Ciao

How did you install xorg? What is your hardware? (lspci -vv) Please provide details.

Qosmio X870-116: usage of Intel / nVidia GPU on internal / external display

Hello,
I have a Qosmio X870-116 which have 2 video cards, a Intel on board and a Nvidia more powerfull.
My probleme, I don't how I switch my display on the Intel card and I see my Nvidia only for the external display.
Some one have an idea to switch on the nvidia card to my first display?
Thanks

Hi
Something like that isnt possible.
You cannot use two graphic cards simultaneously for internal and external display.
First of all you can switch between external and internal display using the function key Fn + F4 (or just F4)
Secondly the nVidia Optimus technology optimize notebook performance by seamlessly switching between a nVidia GPU and Intel internal graphic card.
The switching is automatic and does not require any notebooks reboot.

Msg 116, Level 16, State 1, Line 6 Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.

Hello,
Can anyone help me?
select year(po.rdata) as 'Ano',
sum(etotal) as 'Valorp' ,
(select year(fo.data),Sum(etotal)
FROM fo (nolock)
where not exists ( select 1 from pl (nolock) where pl.adoc = fo.adoc and pl.cm = fo.doccode )
group by year(fo.data))as 'Valorap'
from po
group by year(po.rdata)
order by year(po.rdata)
Error
Msg 116, Level 16, State 1, Line 6
Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.
Consultora

Hi Prashanth,
select year(po.rdata) as 'Ano',
sum(etotal) as 'Valorp' ,
(select Sum(etotal)
FROM fo (nolock)
where not exists ( select 1 from pl (nolock) where pl.adoc = fo.adoc and pl.cm = fo.doccode )
group by year(fo.data))as 'Valorap'
from po(nolock)
group by year(po.rdata)
order by year(po.rdata)
Gives me the error:
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
Thanks
Consultora

Failed to retrieve data from the database. [Database Vendor Code: 116]

My report is using Java Bean class as datasource and the Java Bean class calls a report-specific Java program to return a result set.
Report fails to generate and the error message is
Failed to retrieve data from the database. Details: [Database Vendor Code: 116 ]
Can anyone tell me what error code 116 means?
Thanks.

The problem is solved internally. Our team implemented a result set data structure that incorrectly converts a Double into a String before passing it to Crystal Report for rendering. Data Vendor Code I met yesterday was the outcome of illegal class conversion.
I have a side question; our development team would like to use log4j to log method calls invoked during rendering. Our problem could be solved earlier if we knew getString() was invoked instead of getDouble() during rendering. We thought of specifying the full path of log4j jar file in CRConfig.xml but we don't know how to configure CR to write logging information into a specific file location.
Please help.
Thanks

Downgrading 5508 from 7.0.116.0 to 7.0.98.218

Hi all, I've just gotten in two new 5508 controllers that have come preinstalled with code version 7.0.116.0. My issue is that when I go to downgrade these to 7.0.98.218 I get an error after the Image version check is passed stating the following:
ERROR: Incompatible SW image.
ERROR: Please install the Data Payload Encryption licensed image.
I've tried multiple times to no avail, I've also gone as far as installing the LDPE image of 7.0.116.0 thinking it needed that before downgrading but it still didn't work.
Any ideas / suggestions are appreciated.
Thanks!

Ryan,
You are correct, 7.0.116.0 is the first WLC image where we have the normal and then LDPE image available. The LDPE image is intended for countries that require special licensing for data payload encryption.
In order to comply with export laws, we do not allow units that have LDPE image installed to be converted to normal software -- I think this is the problem you are currently facing.
At this point you should go ahead and open up a TAC case to discuss your options in further detail. You can include a link to this thread in your problem description.
-Patrick Croak
Wireless TAC

7.0.116.0 vs 7.0.116.0-ER

Similar Messages

Maybe you are looking for