7.0.2 charts wont display in IE 6 Browser
I recently upgraded to CF 7.0.2 and now my charts aren't
displaying in my IE-6 browser. I saw the individual hot fixes for
this problem but it only is mentioned with CF 7.0 and CF 7.0.1. The
current cumulative hot fix for 7.0.2 doesn't menion this problem.
Does that imply the problem is suppoed to be fixed for 7.0.2?
Should I try to run the 7.0.1 hot fix for this against my
7.0.2 server?
thanks,
Bill .
Your first attempt at fixing this is included in the most
recent cumulative coldfusion hotfix. This can be downloaded from
adobe.com somewhere. I am not exactly sure where. We attempted this
because the hotfix says that it should work but it did not work for
us and that is why I had to resort to rewriting the rendered chart
code on the fly.
Your second resort is to write the string manipulation I
referred to earlier. The first step in this is to wrap your chart
code in a cfsavecontent tag and use the variable attribute of that
tag to save the contained rendered chart code into the variable.
What will be contained in this variable is the chart code you see
rendered in the source of your page. So, it is just a big string
variable. Then, you have a couple choices. The first is you can
rewrite the code that is written specifically for the IE browsers,
that which is wrapped in the javascript function, using your string
manipulation skills. Any help with that will take you to another
section of the forums. The second option is to move the script
referenced by the IE specific code in your page to a directory
accesible via the web. Then, again, use your string manipulation
skills to rewrite the path to that script with the cfsavecontent
tag as I described above.
Similar Messages
-
i have no issue with youtube uploads just facebook and
pinterest images can anybody help thanksThe iMacros extension? https://addons.mozilla.org/firefox/addon/imacros-for-firefox/
I'm not familiar with this one. If you don't get a good reply here, try the extension's support site:
http://forum.iopus.com/viewforum.php?f=11 -
In the new Numbers, How can I get a 2D stacked column chart to display only 1 column?
In the new Numbers, How can I get a 2D stacked column chart to display only 1 column?
This is one of those things that I find really strange about Numbers 3. The control for what you want to do is not where anyone would expect to find it.
Select the Chart
Click on Edit Data References
Look at the bottom left corner of the Numbers window. It should say "Plot Columns as Series" or "Plot Rows as Series"
Click on it and change it to the other -
Hi ALL,
I am using Combination Chart to display my Graph (Displaying as Line Chart)
In which there is 5 Column
IN column 4 there is values in All cell.
but for other column(1,2,3 & 5) there is value or may be it will Blank.
Now if my column 1 2 or 3 is blank my legend is showing Legend for all this column as column 4 is not Blank.
But for column 5 it shows Legend, only if Values is there and if column is blank legend is also Blank.
I want to show column 5 in legend. irrespective of if Value is there or not.
ThanksHi Ayush,
If you want to show your legend in the Graph always, you go to Behavior in the chart properities (Go to Ignore Blank Cells, then Uncheck the selection buttons In series, In values)
If you don't want want to show legend in the graph, you check them, if you check tem chart will get fit into the space you have provided, else chart looks not good.
Regards,
G.S.Ramanjaneyulu. -
How do I get an XY Chart to display properly while using embedded loop
s to periodically read multiple channels of similar data? (multi-Y versus specified time) The plot just becomes a point or a single plot of all values taken at one scanning of all channels. I want multiple plots over time updated at the time of scanning.I have also stored my data in a daily text file that is tab delimited. The text files consists of a row of text column headers, a blank row and then rows of data. The data rows are mixed data types. The first column is a date/time such as Mar 1, 2002 12:01 pm. The remaining columns are numeric data. I can't seem to get my data to plot properly in an XY chart from memory and am having problems parsing the data with mixed data types in the data r
ows. The format I am using works great for viewing the history files in Excel.
When I plot the data, I either get a single point or a a series of points for a single reading of all channels or I get a line connecting all data for that single scan reading. What am I doing wrong? At this point, I don't care if I read the data from the file to plot it or if I can just get Labview to plot correctly as the data is gathered without going to the history file.
As noted in the summary question, I have embedded loops in my applicaiton. I have a while-loop that determines the scan rate and keeps the program running until it is turned off. Inside of that, I have a for-loop (in a subVI) which scans all my data channels.
Thanks for your help.s to periodically read multiple channels of similar data? (multi-Y versus specified time) The plot just becomes a point or a single plot of all values taken at one scanning of all channels. I want multiple plots over time updated at the time of scanning.XY plots expect a cluster containing two 1D arrays for the X and Y
coordinates of the individual points. If you want multiple plots you can
supply an array of these clusters but you have to resupply the "x" array
for each of them.
Hope that helps,
Rudolf
Adrien wrote:
: How do I get an XY Chart to display properly while using embedded
: loops to periodically read multiple channels of similar data? (multi-Y
: versus specified time) The plot just becomes a point or a single plot
: of all values taken at one scanning of all channels. I want multiple
: plots over time updated at the time of scanning.
: I have also stored my data in a daily text file that is tab delimited.
: The text files consists of a row of text column headers, a blan
k row
: and then rows of data. The data rows are mixed data types. The first
: column is a date/time such as Mar 1, 2002 12:01 pm. The remaining
: columns are numeric data. I can't seem to get my data to plot
: properly in an XY chart from memory and am having problems parsing the
: data with mixed data types in the data rows. The format I am using
: works great for viewing the history files in Excel.
: When I plot the data, I either get a single point or a a series of
: points for a single reading of all channels or I get a line connecting
: all data for that single scan reading. What am I doing wrong? At
: this point, I don't care if I read the data from the file to plot it
: or if I can just get Labview to plot correctly as the data is gathered
: without going to the history file.
: As noted in the summary question, I have embedded loops in my
: applicaiton. I have a while-loop that determines the scan rate and
: keeps the program running until it is turned off. Inside of
that, I
: have a for-loop (in a subVI) which scans all my data channels.
: Thanks for your help. -
MBP wont display 1080p on monitor any more
I have an early 2011 Macbook pro and a hp 2511x monitor. The setup worked flawlessly before I went off to school. Now that Im back home my macbook wont display 1080p on the monitor, only 720p. While attempting to display 1080p the monitor screen is blank but I am able to move my mouse over to the external dispaly just fine, just no picture. My mac will display 1080p on other external monitors & the monitor will work fine with other computers or xbox on 1080p.
Just upgraded from 10.7 to 10.9 and still not working properly.
Connecting from mini display to hdmi
Thanks!Hey adz2k14!
Here is an article that will help you troubleshoot this issue with your AirPlay functionality:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden -
Charts Not Displaying in 3.1.1
Hi,
I'm teaching a class, running APEX 3.1.1.00.09. Can't get any charts to display. If it is a chart in the Sample Application, I get a "Waiting for Data" message. We tried making a chart using Interactive Reports, get nothing at all. Have installed Adobe Flash Player 9.0.124.0 today from adobe website. Checked that column headings don't have " around them or blank spaces as suggested by others in forum. Any other ideas. Kinda hurts the class to not show off the charting capabilities.
Warren CappsHi all,
I have been having the same problem as described here and in my quest to get it sorted I came across the following post:
Link: http://beyondoracle.wordpress.com/2008/02/11/apex-charts-with-https-connections/
The significant configuration for by Joao (author of the above blog) and I is that we are using Apache as a reverse proxy in order to use SSL / https.
In my case I could see the charts without a problem if I went directly to the Apex host from within my firewall, but if I used https via the Apache reverse proxy (either side of the firewall) then I got either the "Loading data. Please wait" or "Waiting for data..." message in place of the chart.
In summary, I ran the following and it fixed by problem:
BEGIN
DBMS_EPG.set_dad_attribute ('APEX','cgi-environment-list','REQUEST_PROTOCOL=https');
DBMS_EPG.set_dad_attribute ('APEX','cgi-environment-list','HTTP_HOST=<my_host_fqdn>:443');
END;
* The effect was instant - no need to restart anything
I should mention that everything else I had tried in my Apex environment was accessible over https before running the above code.
I hope this solves your chart problems too, but if not then that it takes you at least one step closer...
Martin
Edited by: empee on Aug 31, 2008 11:22 AM -
I am using pie chart to display the top 5 countries based on the values. For this, i created an advanced option where on the change of is country with TopN being 5 including others and show values is Pth pecentile (P=50) of @value percent.
The problem is that the pie chart percentage is showing as 52.2% for a country and the detail information below is showing 39.38% which is calculated based on value / total value * 100. The same formula is used for the pie chart as well.
Is this how its supposed to behave or should it show the correct value on the pie chart? How can i achieve the correct value.
thanksPlease re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
-
Charts not displaying properly in Internet Explorer
I have a component that takes in an xml formatted set of
charting data and displays it in both chart form and in a data
grid. In internet explorer I occasionally see spikes in the lines
on my chart. It basically appears that the points are either being
plotted higher or lower than they should be at random places. I
have checked the xml input data and it appears to be correct. Also,
the same data the chart is using is being displayed in a data grid.
The data grid shows the correct values as well.
So it appears that my xml data and the values in the data
grid are correct, however the chart does not match. This is
sporadic behavior. Most of the time, my charts are displayed
correctly, however occasionally one or more data point will be in
the wrong spot. Also, this only happens in internet explorer. I
can't seem to reproduce it in Firefox.
Has anyone seen anything like this? Any ideas on how to fix
it?
I appreciate any help. Thanks,That's exactly what IE conditional comments do. They are ignored by all other browsers except IE. And you must add the <![endif]--> or it won't be treated as an IE Conditional Comment.
<!--[if IE]>
<link rel="stylesheet" type="text/css" href="IE-only.css" media="screen" />
<![endif]-->
Also, I see errors in your IE only css file. It must not contain HTML code.
@charset "UTF-8";
/* CSS Document */
<style type>
#Buy_DVD_Movie_Button a img {
float: left;
padding-left: 345px;
#DVD_verbage li {
color: #FFF;
font-family: Arial, Helvetica, sans-serif;
text-align: left;
margin-right: 250px;
list-style: none;
float: none;
#Download_verbage li {
color: #FFF;
font-family: Arial, Helvetica, sans-serif;
margin-left: 710px;
list-style: none;
</style>
Nancy O -
Hi,
PDFs on my system work fine. They display in IE no problem.
In adobe reader, I've set the pdf to open in a separate window by unchecking the "display in browser check box"
After no luck with the firefox options Ive downloaded the add-on "pdf-download" and set it to display\open pdfs in a new window, but this still doesn't work - I get "the adobe acrobat reader that is running cannot be used to view pdf files in a web browser...try again"
I had some luck getting this to work by giving the user admin rights, but have failed to find a good consistent solution.
any ideas are much appreciated.
thanks
DanI found the solution firefox wont display the image if the image location doesn't start with web application image folder root.
So Instead of C:/Images/image.jpg it should be:
Inside TOMCAT/WebApp/WebApplication it should be:
/images/image.jpg instead.
Message was edited by:
The_Developer -
My imac screen wont display very light tints of colours or show the banding in file windows
My imac screen wont display very light tints of colours, but the same file is showing the tints on another imac. I have calibrated my screen, but no change any ideas what is causing this? it also happens on open windows where you should be able to see str
Thanks for posting this. I've been having the same issues myself for a long time and I couldn't suss it out. Like your mac, my contrast setting had been increased too - must have accidently hit the keyboard shortcut. It was also affecting my vision too. The difference is massive.... thanks
-
Will display usps labels in paypal but wont display international labels
when I use usps labels in paypal the domestic labels display and I have no problems, but when I ship international labels it wont display its just blank, I can do both in safari but now paypal dose not support safari and I'm always getting errors, I want to continue using firefox but I cant figure out how to get the international labels to display
I think I've had similar stuff happen to me before. When Java updates it doesn't get rid of the old version; it just installs the newer version. There can sometimes be problems with Java using an older version and not the newest version, or there can be problems with Java getting mixed up due to the different versions; I think the latter problem is the one you are experiencing.
Try going to wherever you have Java installed (c:/program files/java or wherever) and deleting the older version(s). -
My website wont display right on firefox
Hi my website wont display right on firefox,
website is www.nexu.co.il
in chrome and IE it works very well, only at firefox i have this issue \=
what is the problemThis forum is intended for user support, not for web development issues.
Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The contributors over there are more knowledgeable about web page development issues with Firefox.
http://forums.mozillazine.org/viewforum.php?f=25
You'll need to register and login to be able to post in that forum. -
Zen vision :M wont display anything when on & computer cannot recogn
my?zen vision :M wont display anything when?i turn it on & my computer cannot recognise it... no my lcd isnt imploded or damaged...
p.s. the buttons wont even glow when on plz helpAre you sure it's turning on? If the display isn't turning on and the buttons don't light up, it sounds like the player isn't powering on at all. Do you hear it playing music?
Have you tried leaving the player charging for a few hours, and then checking if it starts up on the PC? When it's turned on, does the system recognise it at all, does it see an unknown device for instance?
Cat -
Problem of using Run-chart in displaying result history of QM
Hello all,
I met a problem about the using of Run-chart in displaying result history of QM, normally, when you use this button to do a statistical chart for checking, the data would be displayed in the measure unit of Inspection Lot. What I want to know is whether there is way for me to change the measure unit from Inspection Lot number to another one (eg. batch number).
Could anyone be appreciated to give me a short reply?
Thanks & Best regards,
BennyI think this is not possible
Develop new program
Use following Function module For Batch
1.QRKS_CHARACTERISTIC
Control chart for a characteristic
2.QRKS_INSPECTION_LOT
Control chart for a characteristic/inspection lot
3.QRKS_MASTER_CHAR_MATERIAL
Control chart for a master inspection characteristic/material
4.QRKS_MASTER_CHARACTERISTIC
Control chart for a master inspection characteristic
5.QRKS_MATERIAL
Control chart for a characteristic/material
Regards
Sanjay
Maybe you are looking for
-
How do I transfer my MacBook Air to my wife so she can sync her iTunes account and other settings with her iPad Mini?
-
Hello: My wife's iMac keeps freezing. Here is the info on her machine: mac os x 10.7.5 processor 2.16 GHz intel core 2 duo memory 2GB 667 MHz ddr2 sdram FRee 94.5 mB VM size 164.85 GB active 1.24GB inactive 505.3mb used 1.90 GB page ins 386.2mb pag
-
How to install just the Adobe 7 Writer PDF printer
In our environment we need to be able to print to PDF, but we also have a 3rd party formcreation software that needs Adobe 8 reader to capture digitized signagtures. After testing we have found out that we need to have the PDF printer functionality o
-
How to alter the page header in mode_show_help?
How can I change the page header on the page that gets opened by calling mode_show_help? I'd like to have the help pages maintain the consistancy of the look of the portal. thanks, adam
-
Hello, I'm looking for a solution to execute a method on a backing bean, when a view is loaded. Well I could workaround that with using a commandButton to link to the page and execute the method as an action handler, but that's not really an elegant