7.0.2 put iPhone in recovery mode???
please please i need help, i was updating my iPhone 4 and just as it was about to finish an unkown error occured and now it looks like i have to restore my phone to its factory settings?? I really cant do that, not all my items arew synced!! please help!
In order to put iPhone in recovery mode, firstly leave USB cable connected to computer, but disconnect cable from the iPhone. Then turn the iPhone OFF. Next press and hold the Home button on phone.
While continuing to hold the Home button, reconnect the USB cable to the iPhone. Continue to HOLD until you see the "Connect to iTunes" message on the phone's screen. iTunes should message it "has detected a device in recovery mode"
Similar Messages
-
when i upgraded my iphone to the new update My iphone 5 screen went completely black and has been like it for 2 days. I have tried holding home and lock,I have tried holding lock and the volume, and I have tried holding just the volume, it still just stays black.
When i plugged it into my Mac the apple logo comes up on the iphone screen. and then on the computer it says itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes. (as in the below pictures)
when i click ok to restore it just says waiting for iphone (as in the other photo below). i left it in for 20minutes and still said the same thing.
after that i tried unplugging the iphone and it just went back to being a black screen again if anyone has any idea please please help me, thank you.I searched the iPod Touch forum for "iphone in recovery mode" and it appears there are two possible solutions:
- Place the iPod in DFU mode and then restore it>
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Use this program to get it out of recovery mode:
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov -
How to put ipod in recovery mode without a home button ???
how to put ipod in recovery mode without a home button and i cant get in to my devise what can i do ???????????
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too -
My ipod says that it is locked out for 22,696,574 minutes. ive tried putting it in recovery mode and DFU mode but nothing works AND itunes wont even recongize my ipod and when i plug it into my computer it says UNKNOWN DEVICE, SOMEBODY PLEASE HELP ME I NEED PICTURES OFF OF IT FOR MOTHERS DAY
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iOS- Forgotten passcode or device disabled after entering wrong passcode
3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
4. iOS- Understanding passcodes
5. What to Do If You've Forgotten Your iPhone's Passcode
6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
7. Restoring iPod touch after forgotten passcode
8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
Forgotten Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
If this method does not work, then you will need to fully Restore your
device as New -
I got an iPhone 4 on Thursday.
I connected it to my PC, a Windows Vista, that day and nothing showed up besides a "camera."
My computer picked it up as a camera, which I understand is a common occurence in the iPhone.
After browsing countless youtube videos and Apple Forum Questions, nothing helped.
I put it into recovery mode by holding on the power and menu button, but when I opened iTunes it still didn't detect anything.
I feel like I'm almost hurting my iPhone because I turned it off and on so many times, and plugged it in and out several times, and so forth.
Here is what happened after putting it into recovery mode: 1. A Windows "device locator" popped up. 2. It was looking for a solution to help me with the unknown device, or iPhone. 3. I clicked onto the find solution button, and it told me that I needed a disc.
--- I didn't have a disc, so I looked up this problem and it told me to manually find Apple mobile device support on my driver, so I did.---
4. I then went onto Control Panel and clicked on SYSTEM and MAINTENANCE and went to DEVICE MANAGER.
5. There I found my iPhone listed under USB controllers.
6. I uninstalled and installed it several times.
7. I then manually found a program to ease the problem. The program was "apple mobile device support," which was located on my apple driver.
8. Nothing happened, besides it reporting to me that Apple USB was found and that "code 39" or "code 1" was in the way.
9. I didn't know what to do with this....
By this time, I was about to give up on my iPhone and return it back to the store.
I tried again, but in a different way this time.
1. I put it back into recovery mode and I opened itunes.
2. itunes reported to me that some burning or CD/Drive software was missing and that I needed to reinstall it.
3. SO, I reinstalled it several times, about 12 (iTunes), and nothing changed.
4. I then looked up the problem of why the CD/Drive software problem kept popping up.
5. I fixed it by going to my registry and adding an UpperFilter with the code GEARaspi...something like that.
6. The problem was fixed, but still no iPhone onto my itunes.
I stayed up all night last night to fix this problem...I'm annoyed and tired.
I tried another problem to fix this.
1. I didn't put it into recovery mode.
2. My iPhone showed up under portable devices under "device manager," from SYS/MAIN"
3. I did update software.
4. I clicked on "apple mobile device support" but nothing happened.
5. It reported to me of the Code thing again.
I even called the Apple people and they didn't know what to do, so I stopped calling them...because they only had limited options to fix the problem.
Can anyone help me?There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
my iphone 4 wont turn on. it justr randomnly turned off and i have tried to hold the home and sleep buttons for a minute and also tried to put it into recovery mode but nothing is working?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work. -
my iphone 3gs died and now it wont make it past the apple logo screen so i put it in recovery mode and hooked it up to my itunes on my home computer now it will say do you want to restore this iphone i click ok but then after it exctracts the software then starts to restore the screen goes black and it shuts off then 10 seconds later it turns back on it wont make it past extracting software please help me im getting really mad plaease help. it wont restore my phone and the error message 1611 come up i dont get it.. also the lock button on my iphone is broken and only works when i squeeze the topo of the iphone together so i cant put it in DFU mode
Here is what you should do turn the device on hold the home button and the power button until the device turn off keep holding and when the device reboots release the power button but hol the home button until it shows the iTunes logo then restore it
-
I have an iphone 3G which has been disabled after a child tried to get into it. Itunes will not connect until I have put the passcode in but the device will only enable emergency calls and does not allow a passcode to be put in. I have put it into recovery mode and itunes can't see it. There is currently no SIM card in it and it's not connectng to the wifi so I can't wipe it from the cloud. Any ideas how I can get into it?
iPhones require a SIM for activation.
Put the device in DFU mode (google it) and restore via iTunes. -
Hi, my iphone 5 (latest software) has put itself into recovery mode all on it's own today AFTER I took video of my kids and easter egg hunt. Is there a way to back up the phone prior to restoring it?New HDD (old 1 dead so no Bup)
Thanks Chris The phone has been great until this morning. When using the camera it seemed to shut down, then it was just looping the restart, and finally into recovery It never rains but pours Thanks anyway
BTW, the phone has never been jailbroken or anything. Stock standard -
I need to put my iphone into recovery mode so i can restore it, but i cant turn the iphone off to do this, help please!!
jsmoke123 wrote:
at what point do i plug the phone into the computer?
when the screen goes black release the sleep/wake button, but continue holding home button
PLUG THE CABLE INTO THE DEVICE
do not release home button until an itunes graphic appears on IOS device. -
my computer refuses my new iphone 5 and has put it into recovery mode and itunes has crashed on my computer. Can i get it out of recovery mode without a computer
No, you can't.
-
I have an Iphone 5 and it is locked and I can't remember making a passcode so I tried backing it up and putting it in recovery mode on itunes but it still didn't work.
Hey rayele,
Thanks for using Apple Support Communities.
After reviewing your post, it sounds like you are locked out of the iPhone. You haven't mentioned what part of the process isn't working for you. If you restored to a saved backup and the password came back you may want to see if you can restore as new without using the backed up data.
iOS: Forgot passcode or device disabled
http://support.apple.com/kb/ht1212
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Have a nice day,
Mario -
when i turn on my iphone 5s gold,it keeps on showing the apple logo then turns off. i have put it in recovery mode twice. it will work a week or two then back again. please help! thanks you
hi
... i have a similar problem
but just with the sleep botton.
fist use your adapter with other iphone/itouch ... is posible itś the problem
second .. let your phone charging
...normally if we conect our phone ... after some minuts it's put on.
after 2 hours ... trate to use it ... if after it your phone continue same... could be qaa electrical/physic problem
please if you have a guaranty use it.
im sorry but my english is terrible. -
my iphone 4 has switched off by itself and won't switch back on. The battery wasn't dead, I have tried restarting it and have tried to put it into recovery mode but it still won't switch back on?
Try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
-
Just tried to update iPhone 4S to 6.1 and it first of all failed to back up then it failed to update (Error 11) so i had to put it in recovery mode and restore it then it failed to restore with an unknown error starting to think its an itunes issue does anyone have any advice?
if your computer is not recognizing it, try using a different USB port or different usb cable. if that doesnt work you will need to uninstall and reinstall itunes.
Maybe you are looking for
-
Ipod as a external hard disk!!!
Isnt the ipod can use as a external hard disk>?how?can anybody give some idea in the way to do this!!! thanks!!!
-
I Have office for mac home and business 2011, can you install on both users on one iMac?
I Have office for mac home and business 2011, can you install on both users on one iMac?
-
How to change charts default "show data label" properties.
I tried to change some defult properties of charts.I changed font, color etc, manipulating pcxml file. But i can't fount defult behaviour of data lables. I want to change defult chart "Show Data Labels" properties as "Alwasy" , not "On rollover". Tha
-
Enhancement spot not getting triggered
Hello Experts, I have activated an explicit enhancement spot by right clicking on 'ENHANCEMENT-SECTION->Create'. (ENHANCEMENT-SECTION BELEG_SICHERN_23 SPOTS ES_SAPMV45A. line in MV45AF0B_BELEG_SICHERN include). I have then written my code in the
-
What DO I need to output HD projects to DVD?
Trying to piece together how I will output HD footage to DVD. Have researched and paged through this forum and as a technophobe can't quite get it..I know FCP7 does have output to basic blu ray...I know toast and encore will get me there, but what do