7.0.2 update problem with test site

Is there a fix for 7.0.2 update which allows for school testing? (test.edperformance.com)

There have not been any updates to iOS, no, if that's what you're asking. If you can detail the problems you're experiencing with that site, perhaps someone can offer suggestions.
Regards.

Similar Messages

Exchange 2010/Outlook 2010 Security Alert (...there is a problem with the site's security certificate.)

I've been looking to resolve this issue for a while now and was hoping someone could help me understand my options.
We have Exchange 2010 & Outlook 2010 in our environment. I've created a SSL cert for our ActiveSync from a reputable CA and unfortunately, as you may not be surprised, we are seeing an alert each time we open Outlook that states:
"Security Alert; Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the site's security certificate.
The name on the security certificate is invalid or does not match the name of the site."
Of course my internal server name does not match my external server name. So the SSL I had created for use with OWA and ActiveSync is rejected by my internal Outlook clients.
After doing some research I believe this is related to the Autodiscover service being configured with my internal server name and not my external name.
I've found some info about adding New-AutodiscoverVirtualDirectory and Set-ClientAccessServer commands and then found this article that might help. (Configure
Outlook Anywhere to Use Multiple SSL Certificates) but nothing is specific to my configuration and I'm concerned about what will happen to my existing configuration if this fails.
What happens when you run Set-ClientAccessServer? Does it retain and keep the old server config in place and add a new one or does it wipe it out? Will all of my devices need to be reconfigured?
Same with New-AutodiscoverVirtualDirectory. Does this simply add another virtual directory or is it going to overwrite my existing config?
Then there is the question of whether or not any of this will actually address my issue at all.
absolutezero273c

Sorry.
"[PS] C:\Windows\system32>Set-ClientAccessServer -Identity MailExt -AutoDiscoverServiceInternalUri "https://MailExt
.contoso.com/autodiscover/autodiscover.xml"
The operation couldn't be performed because object 'MailExt' couldn't be found on 'DomainController2.contoso.local'.
+ CategoryInfo : NotSpecified: (0:Int32) [Set-ClientAccessServer], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : 4D980455,Microsoft.Exchange.Management.SystemConfigurationTasks.SetClientAccessServer"...is the error I get.
I've created the split zones and populated the Forward Lookup Zones as follows:
CONTOSO.COM
MailExt(CNAME)MailInt.contoso.local
_tcp _autodiscover(SRV)MailExt.contoso.com
CONTOSO.LOCAL
MailInt(A)192.168.1.10
MailExt(CNAME)MailInt.contoso.com
One thing I did notice is that there isn't a _tcp _autodiscover entry for MailInt in my Forward Lookup Zones. It was recommended that I make that entry for _tcp _autodiscover(SRV)MailExt.contoso.com in another post I read somewhere.
I believe what I am trying to do is create a new autodiscover object as is shown here:
I see there is a Get-ClientAccessServer & Set-ClientAccessServer command but I need to add a CAS. Does the Set-ClientAccessServer add or simply modify?
Or would that require the New-AutodiscoverVirtualDirectory command? I read
this page that discussed creating new virtual directories but that seemed a little risky without knowing all the ins and outs of how this service functions and to what degree this would affect the existing configuration.
I was able to use the Set-ClientAccessServer command and change the actual internal autodiscoverUri to https://MailExt.contoso.com/autodiscover/autodiscover.xml but the name still says MailInt and I continue to get the SSL cert warnings because it is looking
at MailInt.contoso.local.
absolutezero273c

Im trying to update, but all it does is backup my phone, My itunes is updated, BTW, I just went to Apple bar, i had previous problem with prior phone, now im having this update problem with thyis new phone, someone HELP!!

Im trying to update, but all it does is backup my phone, My itunes is updated, BTW, I just went to Apple bar, i had previous problem with prior phone, now im having this update problem with thyis new phone, someone HELP!!

Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

Problem with creating site from another computer!

Hi
I have WebDB 2.2 and Oracle8i instaled on the same computer. I have a problem to create site from another computer. There is not any process when I try to create site. There is always 0%.
But I have no problem with creating site on the origin computer.
Does anybody know something about it?

I am just not clear what to do once I have made changes and have published the new information.
You shouldn't have to do anything. iWeb will save the information in the Domain.sites file. You can keep this file in a folder, or even on your desktop and iWeb will launch from a double-click on the file.

A few problems with my site I'd be grateful for help with...

Hi, I'm encountering some strange problems with my website, and I'd be really appreciative if anyone could help me. The site's live so I've included links to help anyone kind enough to respond. Thanks in advance.
1. On many of the pages, a scrollbar appears at the width of the container as opposed to the browser window. The 'clear' property doesn't seem to work, (although I am quite new to it so could have made some sort of basic error).
http://austinlindsay.com/suretowin.html
2. I'm having difficulty with the 'screenshots' on the left hand side of the page. First, the larger images should only appear when hovering over the thumbnails, but they seem to appear when hovering over the space where they appear.
The second problem is trying to make the background of the larger images consistent with their individual images in the foreground. Problem is the background always have a fixed width across the page. You can see what I mean when hovering over the final screenshot (called 'Scoreboard')
http://austinlindsay.com/virtuoso.html
Two problems with the 'Featured' section. The central link jilts slightly when hovered over. It's really strange. I've tested it by changing the order and putting a different link in the centre, and found it's not a problem with a link, it's a problem with it being positioned centrally. I couldn't find a solution for it, though. The final problem with this is that a horizontal scrollbar appear when hovering over any of the links (apart from the final one, Logos, for some reason).
http://austinlindsay.com/
I know there's a lot of problems here, but thanks in advance to anyone who can help!

No, there is definitely no height property on the container (or the content which is causing the problem). But to be fair, it may be because the content that gets hidden is, until hovered over, not visible. I've posted the code for that below, along with the container if anyone could help?
/*main container*/
#content {
    position: relative;
    left: 0px; right: 0px;
    width: 960px;
    background-color: #333;
    padding-bottom: 3em;
    border-top: 0.1em solid #FFF;
    border-bottom: 0.1em solid #FFF;
    overflow:hidden;
/* container for the screenshots content below this*/
#main_content {
position: relative;
margin: 0 40px;
top: -160px;
/* screenshots - content that seems hides itself*/
#screenshot_list {
position: relative;
left: 72px;
#screenshot_list a {
border:none;
text-decoration:none;
padding: 5px 0px;
display:block; /**space between icons**/
position: relative;
width:150px;
#screenshot_list a span {
visibility:hidden;
display:block;
position: absolute;
/**adjust positioning of full size images in px or %**/
left: 130px;
top: 0px;
/**optional image captions**/
font-size: 13px;
line-height: 1.2;
color: #FFFFFF;
text-align: left;
background-color: #455c5a;
background-repeat: no-repeat;
/**optional image borders & padding**/
border: 2px solid#455c5a;
padding: 15px;
z-index: 100;
#screenshot_list a:hover span, #screenshot_list a:active span, #screenshot_list a:focus span {visibility:visible; z-index: 100;
padding: 15px;
#screenshot_list a:hover, #screenshot_list a:focus
{visibility:visible;
border: none;
z-index: 100;
padding-left:2px;

Problems with French site

I'm getting a very large number of Document Fetch Failures (the majority are 500 errors) when crawling our French site. We are not having any problems with crawling our English sites which are similar to the French site (just the language difference).
For the crawler parameters for the French sources I am using "French" as the Default language and "ISO Latin-1" as the Default character set. The English use "English" as the Default language and "ISO Latin-1" as the Default character set.
Can someone shed some light on why the French site could be generating so many 500 errors? Is there something I am missing?
Also, I'm not sure if this could be the problem but when I initially set up and crawled the French sources I had the default language set at English. After noticing the large number of 500 errors, I changed it to French, and deleted all of the French rows from the database. Recrawled but still getting errors.
Thank you.

Hi All,
This problem has beenÂ found but not entirely addressed yet. When users sign up to Diamond they are askedÂ if they would like to be added to the Developer Group. This should not be an optional step they should be added automatically. When content is published to Diamond it is publushed as Public content or for a particular group.
We will be addressing this issue in comming weeks and i will updateÂ in this post when we have a resolution.
thanks for your patience and please dont hesitate to contact us at any time if you have any issues or suggestions for the site.
[Contact Us | mailto:[email protected]]
Todd

2.3 Update: Problem with AppleTV learning third-party remote

Hello,
I'm trying to set up my third party remote (DirecTV HR21) after updating to 2.3. It all starts well; I go to Settings -> General -> Remotes -> Learn Remote, but I am having an issue when I am making my Apple TV learn the second key (down arrow); I get the error message "apple tv has already learned this button". It's as if the Apple TV thinks the 'up arrow' and the 'down arrow' on my remote are the same key. I tried several times, to no avail.
Anyone else having this issue?

I'm experiencing the same problem with the current DirecTV remote not being able to learn more than the first button prompted to enter (arrow-down). The error message "appletv has already learned this button" appears when attempting to enter the second button prompted (arrow-up). Furthermore, I have attempted configuration on two separate DirecTV HR21 remotes in both AV1 and AV2 modes.
Come on Apple -- don't tease us! Testing wasn't done to make sure AppleTV can learn to respond to a current DirecTV remote? Yikes. I wonder what 3rd-party remotes were tested and confirmed to work.

4.1 update - problems with stereo connectivity

I have a high end audio system in my car... Focals, w7, etc etc. It is ran by a avhp3100dvd. Since I updated my iphone4 to the new 4.1 OS, I get random static through the audio system. It is sporadic, lasts 3 to 4 seconds, goes away, and then comes back. It worked earlier today before I did the update. My itouch works fine, so I know it isn't the radio. I restored the iphone4 AGAIN (a clean restore btw, so I just spent an extra hour organizing my iphone again) just to see if the upgrade was corrupted somehow. I still have the same issue. The phone plays like normal with headphones, it is just when the iphone is synced to the radio.
I have seen numerous complaints about the new OS not being compatible with radios after updates. I was very hesitant to purchase the iphone4 because of this, but I tested it before I bought it, and everything worked with 4.0. That is the ONLY reason I purchased the iphone4. I felt like apple forced 3g customers to upgrade after the 4 update made them unusable. 3g phones need to be fixed with the new operating system and PLEASE FIX connection problems with other devices.
It doesn't make sense why an update would mess up connection capabilities with other devices (isn't that a step backward?). The reason why I have purchased apple devices (iphones, macbook, itouch, ipad) is because they typically just work. That hasn't been the case lately. Thanks for reading my rant

Thanks for the rant but it's probably better to contact Apple about this. We don't work for them.
Regards

Cache problem with one site

I have a problem with not getting the latest version of a page on one site (that I am aware of).
I can get the latest version of http://www.thefa.com/thefacup/more/competition-bulletins on IE but Firefox gives me a page that hasn't been updated. Attached file 1 shows the Firefox cache entry, file 2 shows the page displayed on FF and file 3 shows the page on IE.
This has been a problem with that page since I started using FF over a year ago.
The only way to get the latest version is to "reload the current page" which is not a major problem but is annoying.
Is this likely to be happening with other pages that are not so obvious or is it some incompatibility between that page and FF?

I disabled cookies and deleted the existing ones for this site but it didn't make any difference - I didn't expect it to.
I didn't try "forgetting" the site as my understanding is that this just clears the cache and cookies at that time but it doesn't stop them being saved again.
Is there a way of not caching a specific site? If not, I'll just continue to "reload the current page" when I need to.

Update problems with itunes 10.6.1 on xp

When I try to update to iTunes 10.6.1 n Windows XP sp3 I get the dialog box to repair or remove. If I select repair the update fails. Any ideas on how to correct this issue?

I have an old macbook too.
It seems like Apple writes new software that makes older computers not work as well.
I always have reservations about updating with an older model.
Does anybody else have any problems with the new iTunes?
Model Name:          MacBook
Model Identifier:          MacBook4,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          2 GB
Bus Speed:          800 MHz
Boot ROM Version:          MB41.00C1.B00
SMC Version (system):          1.31f1
Serial Number (system):
Hardware UUID:
Sudden Motion Sensor:
State:          Enabled

I can't access hotmail or gmail. I get the message "unable to connect to the server". However I can access both msn and google main page and not problems with other sites. Any ideas of what to do?

Cannot access hotmail or gmail, although no problems with the actual msn home page or other sites. I get the message: Firefox can't establish a connection to the server at .....
== URL of affected sites ==
http://login.live.com; http://www.google.com

Hi thanks for reply.
No, not that I'm aware. How/Where can I check this?
The only think I've done recently is install a different antivirus program and uninstall the old one which had expired. Not sure if this is linked to the problem...?

OS update problem with BB Torch 9810

Hi there
I've got a problem with my BB device. It is Torch 9810 and recently a software patch has been applied ( version 7.0.0 bundle 1465 to bundle 2406 ). After the upgrade though BB device doesn't work properly, its screen freezes, some applications ( GPS in particular ) does not work, virtual keyboard sensitivity is poor etc. Hence I need to roll back to the previous version of software however rollback option on device is disabled. I can't roll back to the previous version using desktop software either.
Please advice how to resolve the issue or provide me with a link where I can find previous OS version i.e. 7.0.0 bundle 1465.
Regards,
Krum Garkov

Hi kgarkov and welcome to the BlackBerry Support Community Forums!
Plug your BlackBerry® smartphone into your PC and go to www.blackberry.com/update. When prompted to do the update, click on View Other Versions to choose an older version of software to install.
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Since LION update problem with iphone syncronisation

Since the LION update on our macbook we have problems with the iphone syncronisation, reset the iphone has not solve the problem - what ist the mistake?

What worked for me was not on the Apple troubleshooting list. I tried the whole list.
First, I reset the phone. (Reset the iPhone by holding the sleep/wake button at the top right of the device and the home button at the bottom center of the face at the same time. Hold them both until you see the screen go black and the white Apple logo appear. When this happens, you can let go - the iPhone is rebooting.)
Second, I restored the phone.
I could not restore the phone until I reset it.
Good luck.

2 Problems with iWeb site

I have been having 2 problems with my iWeb published site on MobileMe.
1. The Podcast search field does not display correctly - it appears as "two lines", not 1 (ie. the search icon i where it is supposed to be, but the search field is directly below that, not to the side) in Firefox (Mac & PC) and Internet Explorer. Is anyone else experiencing this problem, and if so, how can it be fixed?
2. I work with video Podcasts, which can result in very large video files (upwards of 200MB each). In Firefox (Mac & PC) and Internet Explorer, the entire video has to load before any other part of the page (description, date, titles, etc.) loads. This usually takes about 15 to 20 minutes, which is way to long. Any advice on how to make the page load before the videos?
-david

I have been having 2 problems with my iWeb published site on MobileMe.
1. The Podcast search field does not display correctly - it appears as "two lines", not 1 (ie. the search icon i where it is supposed to be, but the search field is directly below that, not to the side) in Firefox (Mac & PC) and Internet Explorer. Is anyone else experiencing this problem, and if so, how can it be fixed?
2. I work with video Podcasts, which can result in very large video files (upwards of 200MB each). In Firefox (Mac & PC) and Internet Explorer, the entire video has to load before any other part of the page (description, date, titles, etc.) loads. This usually takes about 15 to 20 minutes, which is way to long. Any advice on how to make the page load before the videos?
-david

Update problems with Adobe Flash Player preinstalled via Chrome. Can any one help?

Dears, I am using the Chrome and it says it has installed the Adobe Flash Player and the auto updater. I selected to be advised every time an update is available, before it gets installed. During the start up of my Windows system (i.e. the "autoexec" run) the Flash Player auto updater sometimes indicates there is an Adobe Flash Player update to be installed. Most of the time it is indicated BEFORE the autoexec finishes its sequence and thus still do not have an internet connection perfectly set up. At this point in time the adobe flash player auto updater window indicates there is an error and asks me to retry. Normally I wait a few seconds so the Autoexec run is finished and retry again. Most of the time the adobe flash player auto updater window indicates a second error message, claiming there is still an error. I have already attempted to connect the internet again and normally I am successful, indicating there is NOT a problem with the internet connection. At this point I give up trying to update the Adobe Flash Player and close the window. Can someone give me some light on how to fix this????

The Adobe Flash Player updater DOES NOT update the PepperFlash plug-in in Chrome. Chrome uses a PPAPI plug-in and Adobe ONLY updates the NPAPI plug-ins for IE and other browsers. You can ONLY update the PepperFlash plug-in for Chrome by updating Chrome. The PepperFlash plug-in is a separate file in a separate folder location.

7.0.2 update problem with test site

Similar Messages

Maybe you are looking for