7.0.2  upgrade "hangs" on install, QT upgrade too!  Here's my story...help?

Hello all,
Well, it happened here too. Someone tried to run the iTunes update to 7.0.2. and it hangs right after agreeing to the license agreement. Before the install here's what the system looked like...
10.3.9, itunes 7.0.1, Quicktime 7.1.2(I think).
So, after seeing this problem first hand I ran Software Update and saw that this particular machine was asking for a Quicktime update to 7.1.3. I downloaded and installed, restarted. Tried to open iTunes...same symptom. Trashed iTunes, reinstalled, repaired permissions, opened iTunes, same symptoms.
Then I got to thinking...I remember a while ago that the Quicktime upgrade to version 7 also had some troubles, so I tried to open Quicktime.....SAME SYMPTOM as opening iTunes....hangs with beachball. When going to "Force Quit" neither of these programs shows as not responding either.
Does anyone have a fix for this seemingly WIDESPREAD problem with these latest updates? I (and several co-workers) are anxiously awaiting a solution.

I have found the cause and solution for my particular problem. Please see this thread for the answer and important links...
http://discussions.apple.com/thread.jspa?threadID=752645
Hope that helps some people:)

Similar Messages

  • 64 bit OEL install hangs at installing dogtail in OVM 2.2

    I recently upgraded my server to OVM 2.2 and swapped out the dual core AMDs to quad core AMDs at the same time.
    Since then I have been unable to create any 64 bit OEL servers. In every instance the install hangs when Installing dogtail-0.6.1-2.el5.noarch
    This used to work at 2.1.5 and I can deploy the existing templates, but they are OEL 5.3.
    VM-Server Specs
    [root@vm-server ~]# uname -a
    Linux vm-server 2.6.18-128.2.1.4.9.el5xen #1 SMP Fri Oct 9 14:57:31 EDT 2009 i686 athlon i386 GNU/Linux
    [root@vm-server ~]# lspci
    00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
    00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3)
    00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3)
    00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
    00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
    00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
    00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
    00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
    00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
    00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
    00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
    00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
    00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
    00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
    00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
    00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
    00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
    00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
    00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
    00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
    00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
    00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
    01:06.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
    01:07.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
    03:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 07)
    03:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 07)
    06:00.0 RAID bus controller: Silicon Image, Inc. Unknown device 0242 (rev 01)

    2 new updates
    1) I get the same errors when trying a command line install
    2) I can successfully create fully virtualised VMs
    So if all else fails I can create fully virtualised VMs and then convert them, which is a bit of a pain but will at least give me working templates.

  • Tecra S1 Hangs when installing XP

    Hi,
    I have a weird problem. My Tecra S1 'hangs' when installing a 'normal' Windows XP Pro (instead of using the 'image DVD). The installation works fine up till the last 9 minutes...then it 'hangs', and the laptop stops working. Only possible solution is then to take out the battery & cut the power. Had a (1 time) similar problem of 'hanging' when using the image DVD
    Somebody who had this before ???
    Thanks a lot for all your hints & tips...

    Hej guys,
    Thanks a lot for the suggestions, and indeed, I also tried other CD's of XP pro...all with the same result. At the last 9 seconds it hangs & the only thing I can do is take out the battery. Last thing I tried was installing a Win2000 pro & that works fine. Then I tried to upgrade that version, but again...it stopped at the last 9 seconds.... :-((, so perhaps indeed I have to look in the direction of the memory problem ???

  • Adobe AIR installation issue - hangs at "Installing..."

    Hello everyone!
    I know questions similar to this have been asked many times before, but I did not manage to find the solution to my problem after a few hours of reading and trying the various 'solutions' around the net and this forum. I apologise if I missed it.
    I cannot seem to install Adobe AIR. I run a freshly downloaded installation executable, but it hangs at "Installing..." and 0% progress for a very, very, very long time, if I let it. This last try has been going for 45 minutes as I write. The only way to get out of the installer is through Task Manager and killing the service, as hitting 'Cancel' just makes the installer attempt to cancel endlessly.
    I tried installing it in safe mode but there it gives an error saying I may not have administrative permissions (which I do have);
    I created a new user account;
    I "run as Administrator" and am using an account with administrative rights;
    I tried it through the command line with putting the file in c:\ and running "AdobeAIRInstaller.exe -silent" without quotes from c:\;
    I have shut off all my antivirus software;
    I tried downloading it with a different browser;
    I tried using the MicrosoftFixit.ProgramInstallUninstall, and took Adobe AIR off the list;
    I tried uninstalling all Adobe products and then reinstalling them, with Adobe AIR last
    ... and some more things, but none of this has helped. Here's what the installation log generates when it hangs:
    [2012-12-25:01:16:36] Runtime Installer begin with version 3.5.0.880 on Windows 7 x86
    [2012-12-25:01:16:36] Commandline is:
    [2012-12-25:01:16:36] No installed runtime detected
    [2012-12-25:01:16:40] Relaunching with elevation
    [2012-12-25:01:16:40] Launching subprocess with commandline c:\users\terri\appdata\local\temp\air7b85.tmp\adobe air installer.exe -ei
    [2012-12-25:01:16:40] Runtime Installer begin with version 3.5.0.880 on Windows 7 x86
    [2012-12-25:01:16:40] Commandline is: -stdio \\.\pipe\AIR_7668_0 -ei
    [2012-12-25:01:16:40] No installed runtime detected
    I would much appreciate any help or advice anyone can give me regarding this! This is starting to drive me nuts.
    Thank you.
    ( also, this is my first post, so please forgive if I've done anything wrong or not according to etiquette! )

    Ok, I understand.  So before we continue, we really need to figure out what the exact error is.  Can you, on at least 2 systems, generate the MSI logs we'll need?  Here's a document that explains how to enable logging and where to find the logs once they've been created:
    How to enable Windows logging
    Once you've enabled logging, try installing again.  Grab the newly created msi logs and either post here or email me at [email protected]  I'll examine the logs and see if we can find a common issue between the systems.
    Thanks,
    Chris

  • OS X Lion Server hangs on install ("authenticating")

    I'm trying to update my headless/keyboardless/mouseless Mac Mini Server (mid-2010) running OS X 10.6.8 Snow Leopard Server. I've been able to download Server.app from the App Store without problem, but when I run it, it asks for my admin password and hangs at the "Configuring Services" dialog with an "Authenticating" message in the bottom left corner. It appears to be hanging at this authentication bit.
    WHAT I DID
    Installed Lion.
    Downloaded Lion Server from App Store.
    Launched Server.app.
    WHAT I EXPECTED
    Lion Server to install.
    WHAT HAPPENED
    Hangs at "Configuring Services" dialog with an "Authenticating" message in bottom left corner.
    Eventually times out with a "The request timed out" error message.
    Help?

    I had the same ""The request timed out" error message", with Mac mini server 2010 version.
    I'm going to crazy for this strange bug.
    It still can login OS succesfully, but the server app seemed something wrong on my system.
    (Now, I can't login the Server even the correct password is entried)
    You can see the Server app is not "INSTALLED" situation from the following photo.
    but when I click "INSTALL" server app,
    It didn't have any help if I choose Software Update frim Apple menu.
    So I tried to delete the server app, the click "INSTALL" again,
    such texts shown,
    Since both Lion & Lion Server already purchased on 19 July,
    I just click "Buy Both",  I remembered it seemed both apps begin re-download,
    but the Server app still not work, can't login anymore(my password unrecognized),
    still "not INSTALLED" on Mac app store Purchase record,
    Then I got another receipt from Apple, the purchase became double-counted.
    After reporting the problem to Apple, refund was done.
    But My Server.app was still in a very strange situation.....
    I only tried re-install server.app but without whole system re-install in the above case,
    maybe I will try to click "Buy Both" again,
    try to Re-install the whole system later to see if the bug disappears.

  • Hello sir        i have mac os x lion and A fter upgrading to Lion  i can't instal the face time app its type ( FaceTime can't be installed on "Mac" because the version of Mac OS X is too new. )   can anyone help me please .   notes : on snow leopard the

    hello sir
           i have mac os x lion and A
    fter upgrading to Lion  i can't instal the face time app its type ( FaceTime can’t be installed on “Mac” because the version of Mac OS X is too new. )   can anyone help me please .
    notes : on snow leopard the face time was work normally but i delete it the app i thought it will work after i reinstall it

    Lion comes with FaceTime. Look in your dock or in the Applications folder.

  • My iMac hangs when installing Yosemite.

    My iMac hangs when "installing on HD about 22 mins remaining" I did not check to see if this iMac can support Yosemite. What do I do now?

    You can try using the full offline Reader installer from
    http://get.adobe.com/reader/enterprise/

  • Hang while installing OS X Mavericks

    Hi, my MacBook Air is currently hanging while installing OS X Mavericks. I got stuck after the installer asked me about my iCloud account, which I forgot, so I clicked 'Forgot Password'. It's been showing a gray loading screen ever since. I tried to restart it a couple of times but it won't, and my laptop won't even shut down. I close my computer and then the startup comes up again, I put in password, but it's the same gray loading screen.
    I'd like to reload the installation, or at least get to access my computer files. What do I do? Any help is appreciated. Thanks.

    Nevermind! It managed to shut down after a while. Whew!

  • Here is my problem: "To open "Adobe Photoshop CS5.1" you need to install the legacy Java SE 6 RUNTIME" after upgrading iMac to Yosemite, can anybody help?

    Here is my problem: "To open "Adobe Photoshop CS5.1" you need to install the legacy Java SE 6 RUNTIME" after upgrading iMac to Yosemite, can anybody help?

    This answer may be somewhat late, but just in case other have the same issues, I went to site listed below and it solved the problem.  No need to reinstall CS5 product.  I hope this works for you.
    http://support.apple.com/kb/DL1572

  • FB3 Install Hangs at "Installing Merge Module"

    When i try to install Flex Builder 3 or Flex Builder 3
    Plug-in the installer hangs at this dialog
    Installing... Install Merge Module(Build Time):
    FlashPlayerMergeMo...
    Installing Merge Module
    Anyone know how to fix this?

    Man, I had the same problem here ..
    Just uncheck the "Install flash player 9 to Mozilla and IE"
    in the first steps of installation ... install it manually after.
    It worked here =]
    I hope have helped !! bye !

  • Installing ad-hoc application hangs on installing

    I have developed an iPad application, and added a friend to my provisioning profile and rebuilt my application.  I then sent him the .ipa and he has dropped it into his itunes application, and he can see the icon on his home screen but it just hangs on "installing".
    Any ideas?  Also, he said that the icon doesn't show in his iTunes but it does show in the organizer when i archived the application.
    Any help is greatly appreciated.

    xnav wrote:
    ...I'll bet there is a console message.
    Argh... thanks, xnav!  I feel silly, not to have seen that.. never needed it before, lol
    Plenty of info being generated there.  Also, I offloaded my app launch setup code to a separate method call and now TestFlight registers the launch too.
    Apparently a nib is having problems loading... loads no problem when I run it from xcode! 
    Ther pertinent message: <Error>: *** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Could not load NIB in bundle: 'NSBundle </var/mobile/Applications/64836972-248C-470C-91D3-3F4D76F1621B/r Evolution 2012.app> (loaded)' with name 'RootViewController''
    At least I now exactly where to look now, thanks!

  • LOB apps hanging on install from Company Portal

    Hi,
    We're having issues with LOB (.appx) app installs from the Company Portal.  We're strictly using Intune for LOB app deployment to Win8.1 Enterprise devices.  When users attempt to install a LOB app, it just hangs at installing.  We've tried
    stopping the Intune service, rebooting, even quitting the Company Portal app, but nothing will either kickstart the install or stop it so they can try again.
    If there are multiple requests for the same app via the Company Portal (say 100-200) at around the same time, will the installs be done on a staggered basis, and it's just a matter of timing?
    I appreciate any insight here.

    As you seem not to have an answer for this. From my experience with Windows devices, if an app hangs on install, it has failed but not realised it. It may be something like a config file where it does not understand or is unable to process what to do and
    is unable to skip the step.
    I would normally suggest a local test as admin but cannot advise with appx unfortunately.
    Hope that helps.

  • I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

    I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
    I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

    While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
    https://discussions.apple.com/community/windows_software/boot_camp

  • HP LaserJet 1536dnf MFP - Install operation took too long to execute.

    I am running Windows XP.  When attempting to install the full driver (print, scan, fax), the setup gets to 99% and then hangs.  Eventually I receive the error message "An install operation took too long to execute.  This is a fatal error preventing product use."  There are no error codes.  I have looked through various postings and searched the internet for resolutions.  Have spent hours trying different ways but all have the same result.
    Any suggestions would be much appreciated.
    Thank you!

    If you cannot get the installation to install, did you try some of the steps in the link Shane_R offered in the previous post?
    Are you installing the printer USB, wireless, or Ethernet?
    What method are you using to install (download or software disc)?
    If download, which driver are you having problems with?
    If the previous document didn't help, then it may be a startup-service preventing the installation from going through.  Turn off your anti-virus software temporarily and follow the instructions in the link below on how do turn those services off and how to update the installer just during the installation process, and then let me know how it goes.
    --A fatal error occurred during installation' (MSI Error 1603) Displays During HP Software Installatio...--
    I know you said your problem is different than the one mentioned above but I think these steps will be the same and hopefully get your printer installed.  If it doesn't help, answer my questions above please so I can determine the next step to take.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • HT201364 Hi friends, I have a Mac Pro OS X 10.5.8, I want to upgrade newer version its possible, please help to get a solution thanks

    Hi friends, I have a Mac Pro OS X 10.5.8, I want to upgrade newer version its possible, please help to get a solution
    thanks
    Mujeeb

    See options below:
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading from Snow Leopard to Lion or Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • I have downloaded iOS 6 to my iTunes but I have clicked "Download Only" not "Download and Update" how do i install/sync it to my iPad. Please help me, its taken me hours to download it i don't want to do it again :(

    I have downloaded iOS 6 to my iTunes but I have clicked "Download Only" not "Download and Update" how do i install/sync it to my iPad. Please help me, its taken me hours to download it i don't want to do it again
    PLEASE HELP ME!!!

    Hook your iPad into your computer and open iTunes. GIve it a couple of minutes to get going, then click on the name of your device, then the main summary page. In the middle you'll see a software update button/area. Click on check on updates and update and follow the prompts.
    it SHOULDN"T redownload but if you've already got it should just install.
    I'd suggest that you first do a complete sync before you update, that way you have a good backup to restore your device from if the upgrade doesn't go perfect.

Maybe you are looking for