7.0 Standard problem

i am having a problem with excel.
when creating a pdf within excel my comments do not appear in the worksheets. i have 4 worksheets, the comments for the first worksheet appears but the 2,3 and 4th worksheets the comments do not appear in the pdf. any solutions. cannot seem to find this topic anywhere. thanks

Note – my scanner has been switched off since Friday
This afternoon, I went into the adobe website and downloaded and installed, in sequence, the updates for Acrobat 7.0 – including rebooting the computer when necessary
During the process, when I got to 7.10, I got practically the same error message about Distiller i.e. can’t read the memory at the exact same location
It can’t be a scanner problem, as it was switched off and not being used, so it must be a Distiller problem (not that I have any idea what Distiller is)
How do I fix it?

Similar Messages

Windows 2008 Server Standard - Problems Printing

I have an issue with a server that we are currently setting up in a bus station.
There are 6 machines in total, one is the server which is running Windows Server 2008 Standard 32bit SP2, the other 5 are the client machines which are all running Windows 7 Pro 64bit SP1.
All 6 machines are all linked together on the same domain and they all speak to each other, i.e all ping each other.
The issue we now have is that we have 5 printers to link to the network, all the prints are plugged directly into the Ethernet sockets on the wall which then go to the switch. The prints all have ips assigned to them and the server will see them but will
not communicate with them. If we try to ping any of the printers it fails.
We have loaded print service/print management on the server and we can set up the printers through that. Again we get the error that it is not communicating with the printer so it asks you to load the driver manually(gives us a huge lists of makes and models).
In the network list through control panel we dont get a list of printers.
If anyone can help that would be great and could let us know what we are doing wrong.
If i have missed anything important out please let me know.
thanks

Until you determine the underlying network transport problem this has nothing to do with printing.
Get the network configured so you can ping or use tracert to the IP of the device. It's possible the printers are not properly configured for your network but once again not a printing issue at this point but a networking issue.
Alan Morris Windows Printing Team

Acrobat X standard problem Verdana-Italic font

when opening a pdf from a reliable source using acrobat_x standard a message comes up that it can't find Verdana-Italic font and doesn't display most of the document. However if I open the same pdf with Adobe reader XI it has no problem. any suggestions out there?

Quit acrobat
Try throwing away Tha Adobe Fon cache.
Open Acrobat
Let it rebuild the font cache
Then try opening File.

External LCD flicker (timing standard problem?)

My external LCD panel flickers when connected via DVI. It basically looks like a CRT refreshing. If I connect it with VGA, it doesn't flicker. It doesn't flicker when connected to a different machine. And it doesn't flicker if I boot the machine into Windows.
I've tried setting different refreshes on it with SwitchResX to no avail. Again, it works perfect in Windows, but my built-in LCD has whine in Windows when not at full brightness. So, in handy chart form:
OS X
Built-In: Perfect
External: Flicker
Windows
Built-In: High pitched whine when not at full brightness
External: Perfect
The only conclusion I can draw from this is that it is related to the use of different timing standards or something of the like. Clearly all the hardware is fine.
So, does anyone have any idea how to go about changing the timing standard used in OS X?

I'm experiencing almost the same problem as you: When I connect an external LCD projector to my Macbook Pro via DVI/VGA adaptor, I notice a flickering of the LCD projektor. The intensity of the flickering seems to depend on the frequency I adjust in the monitor control panel. Unfortunately there's no frequency that fits the needs of the LCD projector.
Any idea to solve this problem is most welcome!

Workflow Aproval - Non standard (Problem in the Worklist - bbpbwsp)

Helo,
I have build one approval workflow to the process bid invatation. In this workflow i have one task (non-standard) where the user can approve de process.
The client use de ITS SRM, the worklist used is the BBPBWSP.
When the Workflow start, the approval task appears in the worklist, but when i execute this task, it is open initial menu SAP. Not using our service Z.... instead /scripts/BBPAPPROVAL/...
Can anyone help me?

Hi
I know the ITS Debugging makes quite a life easy for some of the cases, like this.
By the way, which SRM version are you using ?
Anyways, will give you details, how to enable the ITS debugger in your system. Ask your BASIS person to help you out in this case.
Note 451292 - How to use ITS debugger
Note 304371 - RFC debugging set in service file BBPUSERMAINT
Note 392570 - EBP: Required data on the problem processing
Note 893425 - MIME type with attachments
Note 954135 - Instructions for debugging workflow activities
Note 903200 - Workflow tracing for problem detection
Note 995328 - Extended System Status Information for SAP SRM
Hope this will help.
Please reward suitable points, incase it suits your requirement.
Regards
- Atul

Widescreen/Standard Problems

Hello -
I have created a movie that I exported into iDVD. It needs to show perfectly and in whole as a standard movie, but the sides are being cut out. I'm using an old iDVD theme that is not widescreen, exporting as a Quicktime movie (not conversion). Essentially, I do NOT want widescreen at all.
I've experimented with different Easy Setups and have spent hours trying to solve this problem with no success. Can you please help?

I've never had this problem with movies I've created before. Now I have words and borders cut out. I am previewing on a regular TV and it's messed up. Maybe I should just be sure to put text near the center of the screen and delete the borders altogether? That can't be right.....

Upgrade to CS6 Design Standard problems

I bought CS5 Design Standard on March 30, 2012 so I applied for the free upgrade to CS under the "Claim your complimentary CS6 Upgrade" program (http://helpx.adobe.com/x-productkb/policy-pricing/upgrade-policy-produ ct-announcement1.html). I got an e-mail saying I was approved. Under "My Adobe", it showed a receipt for the free upgrade with an order #. There is a link on the receipt page to download the upgrade but when I click on the link it said I have no download. I contacted cutomer service a couple of times (phone and chat) and finally I got an e-mail with a serial number for CS6 Design Standard and it said to click on the download link on the receipt. But now the receipt that was there is gone and I can't download anything. I contacted customer service again (chat) and they said it should be up in 24 hours. It's been a week now and I contacted them again (response to open support ticket) and no answer now. I thought I would download the free trial and use the serial number I got but I can only find a download for CS6 Design Premium, not Standard. SO, where can I get a download for CS6 Design Standard or an upgrade to the same from CS5?? I have a serial number from Adobe but no place the download the program.
I went ahead and registered the CS6 serial number I got from the [email protected] e-mail and now it shows up as a registered product. It shows:
ADOBE DESIGN STANDARD 6 Win June 30, 2012
with the serial number underneath.
I looked around to see if a download link would show up now, but I still can't find anything. Any ideas?
(I originally posted this under the trial downloads section but moved it to here since it seems more appropriate).

Thank you for the help. I finally got it all installed. It only took 3 weeks to get this done. You have been very helpful, but Adobe has been extremely unhelpful. I'm not sure if you work for Adobe, but if you do let management know their customer support is lacking in many ways. Sorry for the editorial.

Acrobat 8 standard problem

have been
trying to convert some word docs to pdf t
he program starts to convert the gives error message that con
vertion has failed correct the error and try again (have
no idea what the error is) i have successfully used this pr
ogram before so what is wrong i do not have an idea can anyone help please

Step one in diagnostics is to print to the Adobe PDF printer. If that does not work, then try printing to file and opening the file in Distiller. This second step gets around AcroTray that must be working for the first step. Also, if the problem is in Distiller you should see the errors in Distiller.
If the above steps work, then try to use the create PDF menu selection (PDF Maker), available in most MS OFFICE products with Acrobat. If there is no icon, that is likely your problem. If these options do not lead you to a solution, the come back and be specific about how you tried to create the PDF. There are many ways and your message gave no information. We need the details, or we are just guessing. Also, what OS?

Acrobat X Standard problem

One of my users is expereincing
an issue.
What she is doing is editing a PDF, changing a serial number on it and saving it.
Now she uses the same window to make multiple changes and each file saved is saved under a different name.
Since upgrading to Acrobat X Standard from Acrobat 8 Standard the issue she is having is that once she changes and saves the file the first time(using save as), when she goes to save it again under a different name after making changes Acrobat crashes.
She is running Windows XP Pro service pack 3, Adobe Standard X patched to version 10.1.0
I have tried searching the net to see if anyone else is haveing this issue with no sucess, so I'm hoping that someone here has seen this.

Quit acrobat
Try throwing away Tha Adobe Fon cache.
Open Acrobat
Let it rebuild the font cache
Then try opening File.

Acrobat 7.0 Standard problem

I had to reinstall this yesterday (I use windows XP if that's relevant) as I was having a problem with it constantly crashing as I was trying to download and open pdfs - I can now do this, but I can't scan documents to pdfs - I use ScandAll 21 with a Fujitsu scanner
When trying to automatically open Adobe Distiller it has the following error message - the instruction at "0x0045c9e5" referenced memory at "0x01bdebdc". The memory could not be "read"
I then have to switch off the computer to exit - it won't let me close ScandAll

Note – my scanner has been switched off since Friday
This afternoon, I went into the adobe website and downloaded and installed, in sequence, the updates for Acrobat 7.0 – including rebooting the computer when necessary
During the process, when I got to 7.10, I got practically the same error message about Distiller i.e. can’t read the memory at the exact same location
It can’t be a scanner problem, as it was switched off and not being used, so it must be a Distiller problem (not that I have any idea what Distiller is)
How do I fix it?

Adobe 8 Standard problem

Today my adobe 8 standard started corrupting the documents I scanned. I thought I could re-install it but don't know how.

Adobe has release the latest versions of Reader and Acrobat which are 10.1.8 and 11.0.4
In case you are talking about Adobe Reader please upgrade it to the latest.
un-install the older version first and then install latest from below link
http://get.adobe.com/reader/
Please let me know if you face more issues with this.

Anyone recognise a standard problem here?

I have a problem which is so simply stated it seems that it must be a classic, but I don't recognise it as one. Can anyone point me in the right direction?
Given:
Set S
Set Zs = {0, |S| - 1}
Symmetric function f : S x S -> N (or R if you prefer)
Symmetric function g: Zs x Zs -> N (likewise)
Find bijection h : S <-> Zs to minimise SUM over s1 in S of SUM over s2 in S of f(s1, s2) * g(h(s1), h(s2))

the form of the term to minimize is quite close to a 2d convolution, but i can't see how this could help :(
in the general case for f,g then i can't see any significant tricks for improving the complexity over the brute force search
if f and/or g map to a subset of N which is smaller than |S||S+1|/2 then i'd guess its likely some practical heuristics would come into play
btw, you could presumably eliminate the need for Zs by having g : SxS->N and h : S <-> S ?
asjf

GUI standard problem...

i have a Jframe containing nested jsplitpane's divided as follows:
| | |
| |____|
| | |
|__|____|
the left JSplit pane consists of the a JTree inside a JScrollPane and the right JPlitPane. The right JSplitPane consists of a JList in a JScrollPane in the top and a JTextPane in a JScrollPane in the bottom. On clicking an element in the JTree the JList alters and on clicking an element in the JList the JTextPane alters. the problem i have that when altering the JTextPane with the following code:
textPane = new JTextPane("SOME TEXT");
bottomRightScrollPane = new JScrollPane(textPane);
the JTextPane does not update. I have gone through the root of re-adding all of the 3 components to the JFrame and then calling setVisible(true) which works, but it makes the GUI blink and i am sure there is a clearer, better, easier way of doing this. I have also tried the random adding of repaint() to every component i could find but again to no avail, Any help would be greatly appreciated as to how i can get the bottom right JScrollPane to show the update JTextPane. Thanks in advance.

thanks again, the setDocument method does work, but unforutnatley i have mouseListeners and hyperlink listeners in the pane that i am overwrtiing the old pane with. Is there anyway to transfer these as well?
I tried using the revalidate method on the JScrollPane the text pane is in, the textpane itself, the splitpane the scroll pane is in and the split pane the splitpane is in. i also tried doing all of these at the same time but this didn't seem to do anything. Thanks again, if there is no easy solution do not worry since i can use the setVisible() method i have been using as it does the job, if in a somewhat ugly fashion.

Illustrator CS5 upgrade to Design Standard problem

Illustrator was working fine before but after upgrade only functions as a viewer of Ai documents. Selecting any tool only provides the hand tool, no other action possible. Acrobat Pro works fine, Photoshop works fine.
Assume the best start is to uninstall and reinstall but I won't be able to access the disks to do that until next week. Any ideas appreciated.
System: 2008 Macbook Pro, OSX 10.7.3; Illustrator CS5, Version 15.1.0

The hand tool isn't good enough for you?
Have you tried deleting your preferences?
http://www.illustratorhints.com/2010/05/delete-preferences-file/

Bean problem with creating Adapter Module in NW developer studio

Hi Gurus!
I started to develop an adapter module like described in
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/02706f11-0d01-0010-e5ae-ac25e74c4c81
Unfortunatelly, I'm getting error described on page 9 of the document:
Bean problem: no interface classes found
I cannot resolve this problem. I've tried it also like described in the document, but no success.
Any ideas of what could be wrong?
Thank you!
Marthy

Marthy.,.
Close and open project..standard problem ONLY with nwdi..
Regards
Ravi Raman

7.0 Standard problem

Similar Messages

Maybe you are looking for