7.0 WLC Code and Assurewave

Hi all,
I'm looking at doing some testing with one of my controllers by upgrading it to version 7 code but was wondering if anyone out there (in a hospital environment) is running Aeroscout and Vocera on version 7 code on one of my 4404 controllers. Since there's no Assurewave certified code out yet I'm checking to see if anyone's running it and/or if they've run into any issues.
Thanks in advance!

It seems your LAP AP is not getting the iP of the management subnet and LAP is in different subnet than your management IP.
Please try keeping the static IP on the LAP and then try joining it to the controller first and later on keep it on the DHCP.
when AP is plugged into a switch, the switch port needs to be access with the right VLAN allowed

Similar Messages

Intermec 751 Handhelds and WLC code versions

We have Intermec 751 mobile handhelds and three WLAN controllers. A 4404-100, 4402-25, and a 2000-6. The 4404 & 2000 series are running 3.x WLC code and the 4402-25 is running 4.x.
We're using the same SSID & WPA-PSK on all three controllers, and the handheld associates with the controllers that have the 3.x code, but not the WLC with 4.x code. Besides the different code, we have the exact same WLAN's defined. We've also tried creating an Open WLAN with no security, and still nothing. We're using the Intermec Settings app to manage the WLAN settings..
Has anyone run into this before? Other devices - laptops and CK30 scanners can connect, but not the 751's. We're going to open up a TAC as well, but I thought I'd check the boards to see if anyone else has encountered anything similar.

I found this on Intermec's "Knowledge Central". I don't know if this will help but it's worth a shot. It's seems "SR06236001" fixes Cisco LWAPP version 4.x compatibility. Here is the full KC post.
Scope:
7x1 terminals running OSv4.95.1 PSMv4.03 with SR06236001 installed using Funk-WPA-TLS-LWAPP v4.x
Problem Description/Purpose:
The terminal will reauthenticate on the network approximately once every twelve minutes. If hundreds of terminals are deployed, this creates a large amount of unwanted reauthentication traffic on the authentication server.
Answer
Solution/Action Plan:
Intermec Engineering recommends enabling CCKM to reduce frequent and unwanted reauthentication messages on the authentication server.
SR06236001 also offers these enhancements to OS version 4.95.1/4.03 PSM on the 751A, 761A and CN2BA with WM2003:
1. Power managed radio response time is improved (PSP).
2. Roaming performance with LEAP is improved.
3. Fix for Cisco LWAPP version 4.x compatibility.
4. Fixes a CCX association ID problem that was associated with CCKM.
Do not use SR06236001 on devices other than the 751A, 761A, or CN2BA (Samsung radio).
SR06236002 is specifically for the CN30A with Windows Mobile 5 and contains the same enhancements (Samsung radio). This updated has been tested on CN30 OS version 2.47 with version 2.01 SD Card Image.
Installation instructions for either SR listed above:
1. copy the associated CAB file to \CabFiles and warm boot
or
2. copy the CAB file to \Temp folderand double-click on it.
The terminal will automatically warm boot after the SR is installed.

Called-Station-ID attribute and Cisco WLC code 7.4

Hello
I have 2 WLCs configured with 2 SSIDs (one is [WPA2][Auth(802.1X)] and the other is Web-Auth). One of the WLCs is remote and its WLANs are configured with mobility anchors pointing to the other WLC. Both WLCs are configured with Called-Station-ID set to AP Mac Address:SSID. I use this attribute on ACS to authenticate/authorize users based on what SSID they connect to.
This worked fine on WLC code 7.0 but on upgrading to 7.4 I started having some issues:
clients on the remote WLC can still authenticate on the [WPA2][Auth(802.1X)] SSID as the Called-Station-ID attribute is still AP Mac Address:SSID
clients on the remote WLC cannot authenticate on the Web-Auth SSID as the Called-Station-ID attribute now appears to be the Mac Address of the WLC anchor controller
WLC models are 5508 and current code is 7.4.110.0 (APs are AIR-LAP1142N-E-K9). Can anyone tell me why I'm seeing this behaviour on the Web-Auth SSID on the remote WLC?
Thanks
Andy

Since you have two AAA devices that's sending info, you can have your policy for the guest specifying the guest WLC. The SSID policy for the foreign WLC is only really needed if you have multiple 802.1x authentication from the foreign WLC and that's when you can use the regex to defiance the SSID per AD Group.
Look at a successful authentication from one of the guest users. Look at the detailed log and then in that log, you will see all the attributes being sent that the radius can send back to the WLC. You can use any of those attributes in your policies.
Called-Station-ID might not be sent like what your use to, because the foreign WLC has the access point the guest user associates to and tunnels it back to the anchor WLC. So this attribute might not be available. Things do change with code versions so you might just have to adjust your policies. I haven't played around with 7.0.x code with guest anchor and radius in a while, but I have in the past upgraded radius or the WLC and had to tweak my radius policies.
Sent from Cisco Technical Support iPhone App

WLC code for point to point bridging

What is the best WLC code for point to point and point to multipoint bridging on a 2504 with 2602 APs? 7.2-7.4 had transparent vlan issues and I'm not sure if they were fixed in 7.5-7.6. We have 5-6 vlans that we are needing to bridge between a large open area. Also, are there any bugs with wireless mesh and ISE?

You do not have many choices now, only 7.0.250.0, 7.4.121.0 & 7.6.110.0 codes are supported by Cisco. All other codes have been deferred by them.
I do not have configured those set-up to advise you specific to that. I would think 7.6.110.0 may have fixed whatever the known bugs in previous versions.
HTH
Rasika
**** Pls rate all useful responses ****

Anchor mobility between WLC 5508 and Aruba/Clearpass

Hello. I have a question regarding the abiltiy to configure anchor mobility between a 5508 WLC and an Aruba controller. To date, my understanding is it has never been possible and I have never found any documentation that says it can be done.
Scenario: My organization and a partner organization co-own a hospital. We coexist on a large campus, with each org having a number of buildings that the owning org maintains the network presence in. We also maintain back-to-back firewalls between us and do not hand-off any direct layer 2 interfaces to each other. However, the two orgs do partner to provide each others business SSID's in each other's WiFi networks using anchor mobility. Our current solution utilizes an A/M tunnel between my org's 5508 controllers and the partner orgs 2504 controller and we explicitly permit the tunnel traffic between partner controllers for A/M to work. Last year, the partner org retired some old WiSM's and changed their wireless solution to Aruba and recently implemented Clearpass. In order to maintain A/M with us they left a 4404 operational, but due to the newer code we were running they were forced to purchase a 2504. So now they are only maintaining a limited footprint in their network with a few Cisco AP's and the rest of their coverage areas use Aruba AP's and they have indicated that they want to completely retire their Cisco WLC's. Because we host some of their SSID's on our controllers and can tunnel them to their 2504, they get all of their WiFi traffic coming from our network, however my org can only connect to our SSIDs on their campus in certain areas.
The solution I have been asked to provide is to find a way to continue providing some sort of anchor mobility services between our WLC's and their Aruba controllers. My org maintains that we do not want to simply hand them a layer 2 interface for security reasons, but they want our SSIDs to be available in all areas of the partner org's campus and vice versa. So far I have stalled the partner org's plans to retire their WLC's by telling them that retiring their WLC's will completely break WiFi between orgs, but they are adamant that some sort of A/M solution must be found.
Is there any way to do some sort of A/M between a WLC and Aruba controller and if so, is there any documentation showing configuration examples etc?
Thanks,
John

Hi John,
I do not think it will work. Even if it get working somehow, it will be operation nightmare to troubleshoot & fix a issue since both vendor will say it is NOT supported solution.
What about if you ask them to advertise your SSID (assuming it is dot1x) on their APs as another SSID on their network, but pointing it to your RADIUS & DHCP for IP connectivity (you do not have layer 2 requiremnt for this & can do this as long as you have L3 communication between each other)
HTH
Rasika
**** Pls rate all useful responses ****

WLC 5508 and IPv6 strange problem

Hi All,
I recently migrated APs from a 4400 to 5508 which had the 7.4 code and encountered an issue that I haven't
see before, in short the APs would never join the 5508 even when the selction rules said it should.
The AP would get a discovery response from both controllers and even though the 4400 had 98 APs attached
and the 5508 just 1 and a factory reset was made on the AP, it would always join the 4400.
A packet capture showed that the first CAPWAP address from the 5508 was always an IPv6 whilst the 4400
always sent IPv4 CAPWAP control adressess, disabling the global IPv6 option on the 5508 ensured that the the first CAPWAP control
address was now an IPv4 and the AP then happily joined the controller, IPv6 addresses were still showing up in the discovery responses
but since it was no longer the first one in the packet the AP didn't mind.
Anyone else seen this kind of behaviour before ?

That is weird because I have done many remotely with console access also. The image takes 35-40 minutes to complete so if you reboot the WLC within that time period, the FUS didn't complete. It will seem like the WLC is down, but it truly is until it completes.
Sent from Cisco Technical Support iPhone App

WLC 2112 and WLC 2504

This might be a really stupid question but I need to ask just so that I get a definitive answer. I have a customer that is using a WLC 2112 and has maxed out the licenses for the WLC. I have suggested for him to purchase a 2504 with 30 or 40 licenses to replace the existing 2112. He doesn't want to purchase 30 to 40 licenses and doesn't want to remove the 2112 from the network environment. He would rather purchase a WLC 2504 with 15 licenses and just add that into the network.
My question is, will there be a problem running a 2504 and a 2112 on the same network? Or can I just make one a primary and one a secondary?

That should be fine. Just make sure the WLCs are running the same code version and everything should work fine. This is required for APs failover from one WLC to another. You don't want the APs upgrading or downgrading code versions every time the ap moves from the primary to the secondary WLC.
Sent from Cisco Technical Support iPhone App

WLC 4400 and WLC 5500

We have a site with a WLC 4400 and we would like to setup a Controller failover. The WLC 4400 is EOS/EOL and the replacement available is WLC 5508. Can someone advice me on how to configure these units in Primary /Secondary mode so that if any of the Controllers fail, the other one can take over?
Thanks,

Hi Akil,
You are most welcome
Yes, you can configure 4400's and 5500's in a redundant configuration, but both should be runningthe
same code version. I believe the latest version that is compatible for both is 7.0.220.0.
this is the last version that supports the 4400 series.
Here's a note that reflects the support;
Note
Controllers do not have to be of the same model to be a member of a mobility group. Mobility groups can be comprised of any combination of controller platforms.
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70mobil.html
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen

WLC code: Mesh-Only vs Non-Mesh

Most of the sites have 1131Indoor and one site has 1522 Outdoor AP. All the AP's will have POE cable. We dont need Mesh technology.
We are trying to evaluate between Mesh Only or Non-Mesh code for WLC. Some of the departments are low budget funded so they cannot afford to have two different WLC's.
What is the loss of functionality if we make Indoor AP like 1131 connect to Mesh Only code?
Is there a link that shows the functionality comparison between Mesh Only and Non-Mesh WLC code?

the mesh code right now is still based on 4.1 code.... so you will only have features as of 4.1 (there is no mesh code based on 4.2 yet)....
if you use mesh release 2, the .24 code... its the first mesh code to support internal ap's like the 1131 in indoor mesh and normal local mode (possibly hreap as well but I dont have a doc in front of me right now)......
but if you want to support the 1522 and 1131 on the same WLC you will have to use mesh release 2 the.24 one...

WLC code upgrade, WCS, ap_3600

i'm going to upgrade a 5508 wlc code from
7.0.116.0
to
7.1.91.0
to add 3600 series access points having it all manageable via WCS ver 7.0.230.0
it seems to be possible, as it is explained in the compatibility matrix found on
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
now I have to download the file to the controller...
AIR-CT5500-K9-SPECIAL-7-1-91-0.aes
(direct update possible)
before doing that I'd like to know if I will loose my configuration on the controller
i'm concerned about that because the release document is not clear:
- We highly recommend that you back up your controller's configuration files prior to upgrading the controller software. Otherwise, you must manually reconfigure the controller.
- For busy networks, controllers on high utilization, or small controller platforms it is advisable to disable the 802.11a/b/g networks as a precautionary measure.
- Step 5 Disable any WLANs on the controller.
- Step 19 Re-enable the WLANs......
- Step 22 If desired, reload your latest configuration file to the controller. (reload config after reenabling wlans????? why???)
so will I loose my configuration?
what is Field Upgrade Software? should i use that instead?
another controller another question .....: a cisco wlc 2100
found 2 update files
AIR-WLC2100-K9-7-0-230-0-ER.aes
AIR-WLC2100-K9-7-0-230-0.aes
why 2 update files this time? what file to update first?
thank you in advance for your answers

The 5508 has two files when you go to 7.2, which I would for the 3600. You'll also want to download and install the FUS image.
the 'legacy' WLC, like the 2100, have the .aes which is the OS for the WLC. The -ER is an Emergency Recovery image, it's waht you get when you break the boot cycle.
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Upload new LWAPP code to LAP before WLC code upgrade

Hello,
I read some where that I can pre-position (upload) the new LWAPP or CAPWAP to access points before I upgrade the WLC code. This will reduce the time it takes for the APs to download and run the new code from the WLC
I am not able to find a document to instaruct me how to do it. I'd appriciate if someone can help me out with a link to a document.
Thanks in advace
BoG

Hey there .. Check out this link
http://www.my80211.com/cisco-wlc-cli-commands/2011/2/20/wlc-predownload-the-image-to-the-access-points-from-the-cont.html

My ipod touch is not list as a device on itunes. When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.

Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes

Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.

Hi All,
I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
awebsctl.log file has below errors:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
Catalog Website is working.
Thanks & Regards, Kedar

Hi Jason,
Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
IIS Website: Default Web Site
Port Number: 80
with default value for Web Application Name configured.
For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate.
Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
For more information, refer to Microsoft Knowledge Base.
And awebsctl.log has the below error lines:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
STATMSG: ID=8100
What should I check from IIS side?
Application Catalog Website is functioning properly.
Thanks & regards,
Kedar
Thanks & Regards, Kedar

Table for finding rate based on part code and material

Hi Experts
I am an ABAP consultant with ltd knowledge on SD . Please tell me in which table I can find the rate based on party code and material .

Hi
The standard table is A305. But usually these tables can be customized based on the requirement. So if you are aware about the Condition type for which this Price/Rate is maintained you can find the same in VK13.
In transaction code VK13, maintain the condition type and click on "Condition information" icon. Now dont maintain any input date. Just click on Execute icon or F8. System will give the list of all the tables and data maintained based on the combination.
Select the required table.In SE11, maintain this table with prefix as A. You can get all the required information.
Regards
Vamsi

Sample JAVA Mobile Server Publish code, and technical questions

Dear Oracle technical representative, or user:
I need to programmatically create, and remove publications using the pure JAVA classes of Consolidator, ConsolidatorManager, and ResourceManager for the Mobile Server in OracleLite 9i Release 5.0.1. On the creation side I have managed to get the example found in the directory OraLite501\Mobile\Server\Sample\Sample11 functioning using my installation parameters. I had a very difficult time of it because (1) the sample11 code fails to open an jdbc connection to the Mobile Server Repository Schema with the function Consolidator.OpenConnection, and (2) the ResourceManager function openConnection will not work unless the Webtogo.ora file is in the current working directory. The ConsolidatorManager function OpenConnection may also not work unless the Webtogo.ora file is in the current working directory, but I did test the hypothesis. Both of these problems need to be addressed in the sample11 code, and documentation to save other software developers from wasting hours of their valuable time. See line 223, 386, and 448 in the Publish.Java code that follows this problem description.
With the above two problems resolved, I can now programmatically create publications, but no hints on how to programmatically remove a publication exist in the documentation. The application I am developing will require the dynamic creation, and removal of publications. Also, when developing applications the complete removal of a publication is absolutely necessary when you have botched a publication. Thus my first question is What sequence of ResourceManager, and ConsolidatorManager function calls will completely remove a Publication?.
I also have two issues remaining with the code that I have so far developed. These issues will most likely be resolved, when I obtain instructions on how to completely remove a publication, and associated users. But, perhaps not. Referencing the Publish.java file that follows this problem description,
     1. The ResourceManager function dropUser does not drop a user. See my comments, and code beginning at line 277 in Publish.java. Do I need to de-instantiate all subscriptions, and unsubscribe all subscription users before calling this function.? I think, I tried the de-instantiate, unsubscribe sequence without success, but in the confusion I may not have made the try.
     2. How do I get rid of an index created with the ConsolidatorManager function DropPublicationItemIndex?. My comments on this problem begin at line 522 in Publish.java. For some reason the DropPublicationItemIndex function call made below line 448 does not work. What function calls are required prior to calling the DropPublicationItemIndex function?
Throughout the Publish.java code, I have made comments about some of the problems that I have had in getting the sample11 code working for my installation parameters. I think these comments should help the programmers maintaining the ResourceManager, and ConsolidatorManager code improve the stability of the programs. Please pass these comments, and attached files to the appropriate individuals,
if you are in a position to do so.
The other files that follow the Publish.java code are
     1. Compile.bat - Compiles Publish.java using j2sdk1.4.0.
     2. Run.bat - Executes Publish using \ j2sdk1.4.0\jre\server\jvm.dll.
     3. Webtogo.ora
     4. tnsnames.ora for the Mobile Server.
     5. tnsnames.ora for the Database.
Feel free to access my server if you need to do so in resolving my problems. The parameters you will need to gain access can be found at the top of Publish.java, and in the included *.ora files.
Thanks,
Thomas G. Matney
[email protected]
(662)325-2791
//Start of Publish.java code
// Oracle HTTP Server URL = http://yggdrasill.cfr.msstate.edu:7778
// = http://130.18.168.225:7778
// Mobile Server URL = http://yggdrasill.cfr.msstate.edu/webtogo/startup
// = http://130.18.168.225/webtogo/startup
// Mobile Server Control Center URL = http://yggdrasill.cfr.msstate.edu/webtogo
// = http://130.18.168.225/webtogo
// Mobile Server Control Center URL = http://yggdrasill.cfr.msstate.edu/webtogo
// = http://130.18.168.225/webtogo
// Mobile Server Control Center username = administrator
// Mobile Server Control Center password = admin
// Mobile Server URL = http://yggdrasill.cfr.msstate.edu/webtogo/startup
// = http://130.18.168.225/webtogo/startup
// Mobile administrator username = fiafield // Schema FIAFIELD on FIA.CFR.MSSTATE.EDU
// Mobile administrator password = fiafield // Username and password are the same
import java.sql.SQLException;
import java.sql.*;
import oracle.lite.sync.Consolidator;
import oracle.lite.sync.ConsolidatorManager;
import oracle.mobile.admin.ResourceManager;
import oracle.mobile.admin.ResException;
import oracle.sql.*;
import oracle.jdbc.*;
import oracle.mobile.admin.*;
public class Publish
// Schema names and usernames are not case sensitive.
// UN fiafield = FIAFIELD
// SCHEMA fiafield = FIAFIELD
// Schema name/Username, and password used on creation of Mobile Repository
static String CONS_SCHEMA = "fiafield";
static String DEFAULT_PASSWORD = "fiafield";
static String admin_jdbc_url = "jdbc:oracle:oci8:@WEBTOGO.WORLD";
static String thin_jdbc_url =
"jdbc:oracle:thin:@YGGDRASILL:1521:FIA.YGGDRASILL.CFR.MSSTATE.EDU";
static String Publication;
static String CreateTreeTableShortNames =
"CREATE TABLE FIAFIELD.ZMTR1TBL("
+ "id FLOAT,"
+ "subp FLOAT,"
+ "rnum FLOAT,"
+ "st FLOAT,"
+ "unit FLOAT,"
+ "cnty FLOAT,"
+ "plot FLOAT,"
+ "cyc FLOAT,"
+ "scyc FLOAT,"
+ "tree FLOAT,"
+ "ncpt FLOAT NULL,"
+ "dist FLOAT NULL,"
+ "diam FLOAT NULL,"
+ "dmht FLOAT NULL,"
+ "dmck FLOAT NULL,"
+ "spec FLOAT NULL,"
+ "lang FLOAT NULL,"
+ "nctc FLOAT NULL,"
+ "stat FLOAT NULL,"
+ "util FLOAT NULL,"
+ "deca FLOAT NULL,"
+ "crat FLOAT NULL,"
+ "ccls FLOAT NULL,"
+ "az FLOAT NULL,"
+ "cond FLOAT NULL,"
+ "tlen FLOAT NULL,"
+ "alen FLOAT NULL,"
+ "lmet FLOAT NULL,"
+ "nctg FLOAT NULL,"
+ "rcul FLOAT NULL,"
+ "ncpd FLOAT NULL,"
+ "dead FLOAT NULL,"
+ "mor FLOAT NULL,"
+ "modm FLOAT NULL,"
+ "dml1 FLOAT NULL,"
+ "dmt1 FLOAT NULL,"
+ "dms1 FLOAT NULL,"
+ "dma1 FLOAT NULL,"
+ "dml2 FLOAT NULL,"
+ "dmt2 FLOAT NULL,"
+ "dms2 FLOAT NULL,"
+ "dma2 FLOAT NULL,"
+ "dml3 FLOAT NULL,"
+ "dmt3 FLOAT NULL,"
+ "dms3 FLOAT NULL,"
+ "dma3 FLOAT NULL,"
+ "dbtr FLOAT NULL,"
+ "dbsp FLOAT NULL,"
+ "nxtn FLOAT NULL,"
+ "dbds FLOAT NULL,"
+ "dbaz FLOAT NULL,"
+ "psta FLOAT NULL,"
+ "fiat FLOAT NULL,"
+ "fhmt FLOAT NULL"
+ ")";
static String CreateTreeTableLongNames =
"CREATE TABLE FIAFIELD.ZMTR1TBL("
+ "ID FLOAT,"
+ "SUBPLOT FLOAT,"
+ "RECORD_NUMBER FLOAT,"
+ "STATE FLOAT,"
+ "UNIT FLOAT,"
+ "COUNTY FLOAT,"
+ "PLOT FLOAT,"
+ "CYCLE FLOAT,"
+ "SUBCYCLE FLOAT,"
+ "TREE FLOAT,"
+ "NC_PLOT_TYPE FLOAT,"
+ "DISTANCE FLOAT NULL,"
+ "DIAMETER FLOAT NULL,"
+ "DIAMETER_HEIGHT FLOAT NULL,"
+ "DIAMETER_CHECK FLOAT NULL,"
+ "SPECIES FLOAT NULL,"
+ "LEAN_ANGLE FLOAT NULL,"
+ "NC_TREE_CLASS FLOAT NULL,"
+ "STATUS FLOAT NULL,"
+ "UTILIZATION FLOAT NULL,"
+ "DECAY FLOAT NULL,"
+ "CROWN_RATIO FLOAT NULL,"
+ "CROWN_CLASS FLOAT NULL,"
+ "AZIMUTH FLOAT NULL,"
+ "CONDITION FLOAT NULL,"
+ "TOTAL_LENGTH FLOAT NULL,"
+ "ACTUAL_LENGTH FLOAT NULL,"
+ "LENGTH_METHOD FLOAT NULL,"
+ "NC_TREE_GRADE FLOAT NULL,"
+ "ROTTEN_CULL FLOAT NULL,"
+ "NC_PREVIOUS_DBH FLOAT NULL,"
+ "CAUSE_OF_DEATH FLOAT NULL,"
+ "MORTALITY_YEAR FLOAT NULL,"
+ "MO_DAMAGE FLOAT NULL,"
+ "DAMAGE_LOCATION1 FLOAT NULL,"
+ "DAMAGE_TYPE1 FLOAT NULL,"
+ "DAMAGE_SEVERITY1 FLOAT NULL,"
+ "NC_DAMAGE_AGENT1 FLOAT NULL,"
+ "DAMAGE_LOCATION2 FLOAT NULL,"
+ "DAMAGE_TYPE2 FLOAT NULL,"
+ "DAMAGE_SEVERITY2 FLOAT NULL,"
+ "NC_DAMAGE_AGENT2 FLOAT NULL,"
+ "DAMAGE_LOCATION3 FLOAT NULL,"
+ "DAMAGE_TYPE3 FLOAT NULL,"
+ "DAMAGE_SEVERITY3 FLOAT NULL,"
+ "NC_DAMAGE_AGENT3 FLOAT NULL,"
+ "DB_TREE FLOAT NULL,"
+ "DB_SPECIES FLOAT NULL,"
+ "NEXT_NUMBER FLOAT NULL,"
+ "DB_DISTANCE FLOAT NULL,"
+ "DB_AZIMUTH FLOAT NULL,"
+ "PREVIOUS_STATUS FLOAT NULL,"
+ "FIA_TREE_NUMBER FLOAT NULL,"
+ "FHM_TREE FLOAT NULL"
+ ")";
public static void main(String argv[]) throws Throwable
// Publish - an OKAPI sample
if(argv.length == 2)
CONS_SCHEMA = argv[0] ;
DEFAULT_PASSWORD = argv[1] ;
//create required tables using standard jdbc
//DriverManager.registerDriver ((Driver)Class.forName ("oracle.jdbc.driver.OracleDriver").newInstance ());
DriverManager.registerDriver (new oracle.jdbc.driver.OracleDriver());
Connection c = null;
Statement s = null;
try
// Open connection to Mobile Repositoty/FIAFIELD schema as SYSTEM.
// Need the ability to grant resources, and connection to Mobile Repository user
//c = DriverManager.getConnection ("jdbc:oracle:oci8:@WEBTOGO.WORLD", "SYSTEM", "phwphw" );
// Remote connection. See attached webtogo.ora.
c = DriverManager.getConnection ("jdbc:oracle:oci8:@WEBTOGO.WORLD.YGG",
"SYSTEM", "phwphw");
s = c.createStatement ();
try
s.executeUpdate("DROP table FIAFIELD.ZMTR1TBL");
catch (SQLException ee)
ee.printStackTrace ();
try
s.executeUpdate(CreateTreeTableShortNames);
catch (SQLException ee)
ee.printStackTrace ();
try
s.executeUpdate("alter table FIAFIELD.ZMTR1TBL add constraint"
+" zmtr1tbl_pk primary key(subp, tree)");
catch (SQLException ee)
ee.printStackTrace ();
// Line 223 // create consolidator publications.
try
// *****!!!!! Unless the Webtogo.ora file is in the current working
// directory the connection is not made. This version of the resource
// manager must be looking for the file in the old 8i Mobile default
// directory. This is a definite problem. If the code was working, the
// addition of the webtogo.ora should have affect on the functionality
// of the code.
// The connection is made to the Mobile Server. At least no exceptions
// are thrown, provided the webtogo.ora is in the current working
// directory.
//oracle.mobile.admin.ResourceManager.openConnection(CONS_SCHEMA, DEFAULT_PASSWORD);
// I tried making a direct connect to possibly avoid needing to have the
// webtogo.ora file in the current directory. The direct coonect did not work.
// You can quickly convince yourself that the webtogo.ora file must
// be in the current working directory, by running the code with and
// without the webtogo.ora in the current working directory.
// The directory OraLiteHome\Mobile\Server\bin is in the PATH after
// after installation but the extension .ora is not in PATHEXT. The
// OraLite installer should put .ora in PATHEXT. I tried adding .ora
// to the PATHEXT, but it still could not find thw webtogo.ora file,
// and it should have. What is going on? I am a bit rusty on DOS so
// I may not have thing right.
// OraLiteHome\Mobile\Server\bin is the residing directory for
// the functional copy of the webtogo.ora file.
oracle.mobile.admin.ResourceManager.openConnection(
CONS_SCHEMA,
DEFAULT_PASSWORD,
"jdbc:oracle:oci8:@WEBTOGO.WORLD");
catch(ResException ee)
ee.printStackTrace (); // NULL Pointer Exception?
// The Mobile user is created, and then the function throws a resource exception.
// This is a serious problem with the code. One would assume that the user
// is not created if and exception is thrown.
// This appears to be a bug in the createUser code. The function should return
// false if the user is not created, and handle, or not throw the exception.
// The function always returns false. It does return true when a user is created
// because it throws an exception.
boolean bIsCreated;
System.out.println("Begin of why is ResourceManager not dropping users?");
// Line 277
try
// The dropUser function will not drop a user. I have tested the function
// by creating the user ZMPT1UA in the Mobile Server Control Center
// http://Yggdrasill.cfr.msstate.edu/webtogo
// so I know that the user exist.
// This function throws a ResException but it is not declared correctly
// since you cannot trap the exception as a ResException. It always tells
// me the view does not exist. What steps are required to get the function
// to work? What function calls need to be made prior to calling the dropUser
// function.
oracle.mobile.admin.ResourceManager.dropUser("ZMPT1UA");
catch (Throwable ee)
ee.printStackTrace (); // NULL Pointer Exception?
System.out.println("End of why is ResourceManager not dropping users?");
try
bIsCreated = oracle.mobile.admin.ResourceManager.createUser(
"ZMPT1UA",
DEFAULT_PASSWORD,
"ZMPT1UA", "S");
catch (Throwable ee)
ee.printStackTrace (); // Ignore exception
// Obsolete or depreciated function, according to documentation?
oracle.mobile.admin.ResourceManager.commitTransaction();
// Create CONS_SCHEMA user on the database with the same username, and
// password as the user on the Mobile Server side. This is why the
// DriverManager connection was made as SYSTEM/phwphw.
// Grant ALL to repository, and user on replicated database
// On the database side there is a user with un = fiafield,
// and pw = fiafield, which is the same as the Mobile Repository
// schema name/password pair fiafield/fiafield. Can this duality
// create a problem? Probably not.
// Need SYSTEM ADMIN privilages for the next two steps, and that is
// why the coonection was established as SYSTEM/phwphw.
// Make user, and grants for Publish to user CONS_SCHEMA, and ZMPT1UA
System.out.println("Pargress point D");
try
s.execute("Create user " + "ZMPT1UA" + " identified by " + DEFAULT_PASSWORD);
catch (SQLException ee)
ee.printStackTrace (); // ignore
try
s.execute("GRANT ALL ON FIAFIELD.ZMTR1TBL to " + CONS_SCHEMA + " WITH GRANT OPTION");
catch (SQLException ee)
ee.printStackTrace (); // ignore
try
s.execute("GRANT ALL ON FIAFIELD.ZMTR1TBL to " + "ZMPT1UA" + " WITH GRANT OPTION");
catch (SQLException ee)
ee.printStackTrace (); // ignore
/* This code is not needed to test the code
// Insert items into table FIAFIELD.ZMTR1TBL from FIAFIELD.HUSKY_TREE
String Statement =
"INSERT INTO FIAFIELD.ZMTR1TBL SELECT * from FIAFIELD.HUSKY_TREE WHERE PLOT = 1";
try
s.execute(Statement);
catch (SQLException ee)
System.out.println("FIAFIELD.HUSKY_TREE was not inserted into FIAFIELD.ZMTR1TBL");
ee.printStackTrace (); // ignore
c.commit ();
catch (SQLException ee)
ee.printStackTrace ();
finally
if (s!= null) try {s.close ();}catch (SQLException e1){}
if (c!= null) try {c.close ();}catch (SQLException e2){}
// The Consolidator class is not thread safe, and I will eventually
// need thread safety. The ConsolidatorManage class is thread safe.
//Consolidator ConsolidatorXX = new Consolidator();
ConsolidatorManager ConsolidatorXX = new ConsolidatorManager();
// Line 386
// Try opening a connection. Sample11 does not open a connection, but it seems
// like a logical first thing to do.
// At least with this connection the DropPublication, and AddPublication functions
// appear to work, or at least they do not throw exceptions. The DropPublication
// throws an exception if a publication does not exist? I tested this and indeed
// if I call the DropPublication function, and do not create the Publication again
// when I reenter the program the DropPublication function throws an exception, and
// produces the correct error message(The publication does not exist). There is hope.
// It is very disturbing that the program fails unless the webtogo.ora file is not
// in the current working directory. Because the OpenConnection functions of both
// the ResourceManager, and ConsolidatorManager both appear to need access to the
// webtogo.ora file, and they are finding them in the current directory, the
// logical conclusion is that both of the classes are attempting to open the
// webtogo.ora with the relative path webtogo.ora, and not the absolute path
// OraHomeLite/Mobile/Server/Bin/webtogo.ora. As this has to be the case, why
// is this very important fact not in the documentation? Or, am I wrong?
Connection conn = null;
try
//ConsolidatorXX.OpenConnection(CONS_SCHEMA,
//DEFAULT_PASSWORD);
//ConsolidatorXX.OpenConnection(CONS_SCHEMA,
//DEFAULT_PASSWORD,
//"jdbc:oracle:oci8:@WEBTOGO.WORLD");
conn = DriverManager.getConnection
("jdbc:oracle:oci8:@WEBTOGO.WORLD",
CONS_SCHEMA,DEFAULT_PASSWORD);
//conn = DriverManager.getConnection
//("jdbc:oracle:oci8:@WEBTOGO.WORLD",
//"SYSTEM","phwphw");
ConsolidatorXX.OpenConnection(conn);
catch (Throwable e)
e.printStackTrace(); //ignore error
// Publication name
Publication = "ZMTR1PUB";
try
ConsolidatorXX.DeinstantiateSubscription(Publication, "ZMPT1UA");
catch (Throwable e)
System.out.println("Could not Deinstantiate Subscription ZMPT1UA");
e.printStackTrace(); //ignore error
// Line 448
// There is no Consolidator.OpenConnection in the orginal sample11.java code.
// Why?. It appears to be neccessary. The only way I can make the sample11 code
// or this program work is to open a jdbc connection with the Consolidator.OpenConnection
// function. I assume that somehow the Consolidator.OpenConnection function was
// deleted from sample11.java.
// This try to drop a publication index does not work, because when I try
// to recreate the index in the following code it warns me that I have a
// bad column name for the index. So it thinks the index still exist.
// Why?. How do I get rid of the index?
try
ConsolidatorXX.DropPublicationItemIndex("ZMTR1IX1");
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.DropPublicationItem("ZMTR1ITM");
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.DropPublication(Publication);
catch (Throwable e)
e.printStackTrace(); //ignore error
try
//ConsolidatorXX.CreatePublication(Publication, Consolidator.OKPI_CREATOR_ID,
//"zMTR1.%s", null);
ConsolidatorXX.CreatePublication(Publication, Consolidator.OKAPI_WINCE,
"zMTR1.%s", null);
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.DropPublicationItemIndex("ZMTR1IX1");
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.CreatePublicationItem("ZMTR1ITM","FIAFIELD","ZMTR1TBL", "F",
"SELECT * FROM FIAFIELD.ZMTR1TBL", null, null);
catch (Throwable e)
e.printStackTrace();
System.out.println("Begin of how can drop this index and get rid of the warning?");
// Line 522
// I defined the index ZMTR1IX1 originally on the variable subp, and did not get
// any warning. I then changed the index variable for the index to id, and started
// receiving the warning to check the index column for typographical errors. Even
// if I change the index variable back to subp, I continue to receive the warning.
// How do I get rid of the index and the warning, so I can recreate the index for
// another variable? I quess the real question is "How to I completely remove a
// publication, and all of its parts so I can start over?
try
ConsolidatorXX.CreatePublicationItemIndex(
"ZMTR1IX1", "ZMTR1ITM", "I", "id");
catch (Throwable e)
e.printStackTrace ();
System.out.println("End of how can drop this index and get rid of the warning?");
try
ConsolidatorXX.AddPublicationItem(
Publication, "ZMTR1ITM", null, null, "S", null, null);
catch (Throwable e)
e.printStackTrace ();
try
ConsolidatorXX.CreateSubscription(Publication, "ZMPT1UA");
catch (Throwable e)
e.printStackTrace ();
try
ConsolidatorXX.InstantiateSubscription(Publication, "ZMPT1UA");
catch (Throwable e)
e.printStackTrace ();
try
ConsolidatorXX.CloseConnection();
if(conn != null)
conn.close();
catch (Throwable e)
e.printStackTrace(); //ignore error
// Obsolete or depreciated function, according to documentation?
oracle.mobile.admin.ResourceManager.commitTransaction();
oracle.mobile.admin.ResourceManager.closeConnection();
End of Publish.java code
Begin Compile.bat
set CLASSPATH = .;D:\jdk1.4.0\lib\tools.jar;D:\OraLite501\MOBILE\classes\CONSOLIDATOR.JAR;D:\OraLite501\MOBILE\SERVER\BIN\WEBTOGO.JAR;D:\OraLite501\jdbc\lib\classes12.zip;D:\OraLite501\MOBILE\classes\classgen.jar;D:\OraLite501\MOBILE\classes\servlet.jar;D:\OraLite501\MOBILE\CLASSES\OLITE40.JAR
set PATH= d:\jdk1.4.0\jre\bin\server;d:\jdk1.4.0\bin;D:\OraLite501\bin;D:\OraLite501\Mobile\Server\bin;D:\oracle\ora92\bin;D:\OraLite501\MOBILE\sdk\bin
d:\jdk1.4.0\bin\javac Publish.java
End Compile.bat
Begin Run.bat
set CLASSPATH= .;D:\jdk1.4.0\lib\tools.jar;D:\OraLite501\MOBILE\classes\CONSOLIDATOR.JAR;D:\OraLite501\MOBILE\SERVER\BIN\WEBTOGO.JAR;D:\OraLite501\jdbc\lib\classes12.zip;D:\OraLite501\MOBILE\classes\classgen.jar;D:\OraLite501\MOBILE\classes\servlet.jar;D:\OraLite501\MOBILE\CLASSES\OLITE40.JAR
set PATH= d:\jdk1.4.0\jre\bin\server;d:\jdk1.4.0\bin;D:\OraLite501\bin;D:\OraLite501\Mobile\Server\bin;D:\oracle\ora92\bin;D:\OraLite501\MOBILE\sdk\bin
d:\jdk1.4.0\bin\java Publish
End Run.bat
Begin webtogo.ora
USE_SYSTEM_CLASSPATH = NO
MODE = SERVER
PORT = 80
BASE_URL=/webtogo
ADMIN_TNS_NAME=WEBTOGO.WORLD
ADMIN_JDBC_URL=jdbc:oracle:oci8:@WEBTOGO.WORLD
APPLET_USE_THIN_JDBC = YES
THIN_JDBC_URL=jdbc:oracle:thin:@YGGDRASILL:1521:FIA.YGGDRASILL.CFR.MSSTATE.EDU
SITE_OFFLINE_PERIOD=0
CUSTOM_WORKSPACE=no
CUSTOM_DIRECTORY=myworkspace
DEFAULT_PAGE=myfirstpage.html
ADMIN_USER=8B37E78535B55525292A3A2929292999
ADMIN_PASSWORD=873515A838B85828292A3A2929292999
[EXTERNAL_AUTHENTICATION]
#CLASS=com.acme.SampleAuthenticator
# Web-to-go workspace's font
FONT_NAME=Arial
[FILESYSTEM]
#ROOT_DIR=%WEBTOGO_HOME%\server
#TYPE=O8
#TYPE=OL
#TYPE=OS
# Cache size in MBs
#CACHE_SIZE=10
MAX_CONNECTIONS=4
[DEBUG]
#ENABLE=YES
# The log file name.
#LOG_FILE=test.log
# Machine name and port where wsh.exe -m is running. Web-to-go
# will send debug output to that machine.
#MACHINE=
#PORT=100
[APPLICATIONS]
XMLFILE = ws1.xml
PACK_HELP=D:\OraLite501\mobile\doc\wtg\html\wtgdep.htm
[PUBLIC]
oracle.lite.sync.ConsolidatorServlet=/Consolidator
[CONSOLIDATOR]
# Installer will change these values
SERVER_VERSION=8.1.5
# 8.0.5 or 8.1.5
# Installer won't change these values
MAX_THREADS=3
JDBC_DRIVER=oracle.jdbc.driver.OracleDriver
CREATE_USER_OPTIONS_O8I=PROFILE CONSOLIDATOR_CLIENT_P DEFAULT TABLESPACE USERS QUOTA UNLIMITED ON USERS TEMPORARY TABLESPACE INDX QUOTA UNLIMITED ON INDX
CREATE_USER_OPTIONS_O8=PROFILE CONSOLIDATOR_CLIENT_P DEFAULT TABLESPACE USR QUOTA UNLIMITED ON USR
TEMPORARY TABLESPACE TEMPORARY QUOTA UNLIMITED ON TEMPORARY
TEMP=c:\\temp
WTG_PROXY_PORT=80
TRACE=NO
TRACE_ALL=NO
End webtogo.ora
Begin Mobile Server tnsnames.ora file
# TNSNAMES.ORA Network Configuration File: D:\OraLite501\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
WEBTOGO.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = YGGDRASILL.CFR.MSSTATE.EDU)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
WEBTOGO.WORLD.YGG =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = YGGDRASILL.CFR.MSSTATE.EDU)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
End Mobile Server tnsnames.ora file
Begin Database tnsnames.ora file
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
FIA.YGGDRASILL.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
FIA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
FIA.YGG =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
End Database tnsnames.ora file

Dear Oracle technical representative, or user:
I need to programmatically create, and remove publications using the pure JAVA classes of Consolidator, ConsolidatorManager, and ResourceManager for the Mobile Server in OracleLite 9i Release 5.0.1. On the creation side I have managed to get the example found in the directory OraLite501\Mobile\Server\Sample\Sample11 functioning using my installation parameters. I had a very difficult time of it because (1) the sample11 code fails to open an jdbc connection to the Mobile Server Repository Schema with the function Consolidator.OpenConnection, and (2) the ResourceManager function openConnection will not work unless the Webtogo.ora file is in the current working directory. The ConsolidatorManager function OpenConnection may also not work unless the Webtogo.ora file is in the current working directory, but I did test the hypothesis. Both of these problems need to be addressed in the sample11 code, and documentation to save other software developers from wasting hours of their valuable time. See line 223, 386, and 448 in the Publish.Java code that follows this problem description.
With the above two problems resolved, I can now programmatically create publications, but no hints on how to programmatically remove a publication exist in the documentation. The application I am developing will require the dynamic creation, and removal of publications. Also, when developing applications the complete removal of a publication is absolutely necessary when you have botched a publication. Thus my first question is What sequence of ResourceManager, and ConsolidatorManager function calls will completely remove a Publication?.
I also have two issues remaining with the code that I have so far developed. These issues will most likely be resolved, when I obtain instructions on how to completely remove a publication, and associated users. But, perhaps not. Referencing the Publish.java file that follows this problem description,
     1. The ResourceManager function dropUser does not drop a user. See my comments, and code beginning at line 277 in Publish.java. Do I need to de-instantiate all subscriptions, and unsubscribe all subscription users before calling this function.? I think, I tried the de-instantiate, unsubscribe sequence without success, but in the confusion I may not have made the try.
     2. How do I get rid of an index created with the ConsolidatorManager function DropPublicationItemIndex?. My comments on this problem begin at line 522 in Publish.java. For some reason the DropPublicationItemIndex function call made below line 448 does not work. What function calls are required prior to calling the DropPublicationItemIndex function?
Throughout the Publish.java code, I have made comments about some of the problems that I have had in getting the sample11 code working for my installation parameters. I think these comments should help the programmers maintaining the ResourceManager, and ConsolidatorManager code improve the stability of the programs. Please pass these comments, and attached files to the appropriate individuals,
if you are in a position to do so.
The other files that follow the Publish.java code are
     1. Compile.bat - Compiles Publish.java using j2sdk1.4.0.
     2. Run.bat - Executes Publish using \ j2sdk1.4.0\jre\server\jvm.dll.
     3. Webtogo.ora
     4. tnsnames.ora for the Mobile Server.
     5. tnsnames.ora for the Database.
Feel free to access my server if you need to do so in resolving my problems. The parameters you will need to gain access can be found at the top of Publish.java, and in the included *.ora files.
Thanks,
Thomas G. Matney
[email protected]
(662)325-2791
//Start of Publish.java code
// Oracle HTTP Server URL = http://yggdrasill.cfr.msstate.edu:7778
// = http://130.18.168.225:7778
// Mobile Server URL = http://yggdrasill.cfr.msstate.edu/webtogo/startup
// = http://130.18.168.225/webtogo/startup
// Mobile Server Control Center URL = http://yggdrasill.cfr.msstate.edu/webtogo
// = http://130.18.168.225/webtogo
// Mobile Server Control Center URL = http://yggdrasill.cfr.msstate.edu/webtogo
// = http://130.18.168.225/webtogo
// Mobile Server Control Center username = administrator
// Mobile Server Control Center password = admin
// Mobile Server URL = http://yggdrasill.cfr.msstate.edu/webtogo/startup
// = http://130.18.168.225/webtogo/startup
// Mobile administrator username = fiafield // Schema FIAFIELD on FIA.CFR.MSSTATE.EDU
// Mobile administrator password = fiafield // Username and password are the same
import java.sql.SQLException;
import java.sql.*;
import oracle.lite.sync.Consolidator;
import oracle.lite.sync.ConsolidatorManager;
import oracle.mobile.admin.ResourceManager;
import oracle.mobile.admin.ResException;
import oracle.sql.*;
import oracle.jdbc.*;
import oracle.mobile.admin.*;
public class Publish
// Schema names and usernames are not case sensitive.
// UN fiafield = FIAFIELD
// SCHEMA fiafield = FIAFIELD
// Schema name/Username, and password used on creation of Mobile Repository
static String CONS_SCHEMA = "fiafield";
static String DEFAULT_PASSWORD = "fiafield";
static String admin_jdbc_url = "jdbc:oracle:oci8:@WEBTOGO.WORLD";
static String thin_jdbc_url =
"jdbc:oracle:thin:@YGGDRASILL:1521:FIA.YGGDRASILL.CFR.MSSTATE.EDU";
static String Publication;
static String CreateTreeTableShortNames =
"CREATE TABLE FIAFIELD.ZMTR1TBL("
+ "id FLOAT,"
+ "subp FLOAT,"
+ "rnum FLOAT,"
+ "st FLOAT,"
+ "unit FLOAT,"
+ "cnty FLOAT,"
+ "plot FLOAT,"
+ "cyc FLOAT,"
+ "scyc FLOAT,"
+ "tree FLOAT,"
+ "ncpt FLOAT NULL,"
+ "dist FLOAT NULL,"
+ "diam FLOAT NULL,"
+ "dmht FLOAT NULL,"
+ "dmck FLOAT NULL,"
+ "spec FLOAT NULL,"
+ "lang FLOAT NULL,"
+ "nctc FLOAT NULL,"
+ "stat FLOAT NULL,"
+ "util FLOAT NULL,"
+ "deca FLOAT NULL,"
+ "crat FLOAT NULL,"
+ "ccls FLOAT NULL,"
+ "az FLOAT NULL,"
+ "cond FLOAT NULL,"
+ "tlen FLOAT NULL,"
+ "alen FLOAT NULL,"
+ "lmet FLOAT NULL,"
+ "nctg FLOAT NULL,"
+ "rcul FLOAT NULL,"
+ "ncpd FLOAT NULL,"
+ "dead FLOAT NULL,"
+ "mor FLOAT NULL,"
+ "modm FLOAT NULL,"
+ "dml1 FLOAT NULL,"
+ "dmt1 FLOAT NULL,"
+ "dms1 FLOAT NULL,"
+ "dma1 FLOAT NULL,"
+ "dml2 FLOAT NULL,"
+ "dmt2 FLOAT NULL,"
+ "dms2 FLOAT NULL,"
+ "dma2 FLOAT NULL,"
+ "dml3 FLOAT NULL,"
+ "dmt3 FLOAT NULL,"
+ "dms3 FLOAT NULL,"
+ "dma3 FLOAT NULL,"
+ "dbtr FLOAT NULL,"
+ "dbsp FLOAT NULL,"
+ "nxtn FLOAT NULL,"
+ "dbds FLOAT NULL,"
+ "dbaz FLOAT NULL,"
+ "psta FLOAT NULL,"
+ "fiat FLOAT NULL,"
+ "fhmt FLOAT NULL"
+ ")";
static String CreateTreeTableLongNames =
"CREATE TABLE FIAFIELD.ZMTR1TBL("
+ "ID FLOAT,"
+ "SUBPLOT FLOAT,"
+ "RECORD_NUMBER FLOAT,"
+ "STATE FLOAT,"
+ "UNIT FLOAT,"
+ "COUNTY FLOAT,"
+ "PLOT FLOAT,"
+ "CYCLE FLOAT,"
+ "SUBCYCLE FLOAT,"
+ "TREE FLOAT,"
+ "NC_PLOT_TYPE FLOAT,"
+ "DISTANCE FLOAT NULL,"
+ "DIAMETER FLOAT NULL,"
+ "DIAMETER_HEIGHT FLOAT NULL,"
+ "DIAMETER_CHECK FLOAT NULL,"
+ "SPECIES FLOAT NULL,"
+ "LEAN_ANGLE FLOAT NULL,"
+ "NC_TREE_CLASS FLOAT NULL,"
+ "STATUS FLOAT NULL,"
+ "UTILIZATION FLOAT NULL,"
+ "DECAY FLOAT NULL,"
+ "CROWN_RATIO FLOAT NULL,"
+ "CROWN_CLASS FLOAT NULL,"
+ "AZIMUTH FLOAT NULL,"
+ "CONDITION FLOAT NULL,"
+ "TOTAL_LENGTH FLOAT NULL,"
+ "ACTUAL_LENGTH FLOAT NULL,"
+ "LENGTH_METHOD FLOAT NULL,"
+ "NC_TREE_GRADE FLOAT NULL,"
+ "ROTTEN_CULL FLOAT NULL,"
+ "NC_PREVIOUS_DBH FLOAT NULL,"
+ "CAUSE_OF_DEATH FLOAT NULL,"
+ "MORTALITY_YEAR FLOAT NULL,"
+ "MO_DAMAGE FLOAT NULL,"
+ "DAMAGE_LOCATION1 FLOAT NULL,"
+ "DAMAGE_TYPE1 FLOAT NULL,"
+ "DAMAGE_SEVERITY1 FLOAT NULL,"
+ "NC_DAMAGE_AGENT1 FLOAT NULL,"
+ "DAMAGE_LOCATION2 FLOAT NULL,"
+ "DAMAGE_TYPE2 FLOAT NULL,"
+ "DAMAGE_SEVERITY2 FLOAT NULL,"
+ "NC_DAMAGE_AGENT2 FLOAT NULL,"
+ "DAMAGE_LOCATION3 FLOAT NULL,"
+ "DAMAGE_TYPE3 FLOAT NULL,"
+ "DAMAGE_SEVERITY3 FLOAT NULL,"
+ "NC_DAMAGE_AGENT3 FLOAT NULL,"
+ "DB_TREE FLOAT NULL,"
+ "DB_SPECIES FLOAT NULL,"
+ "NEXT_NUMBER FLOAT NULL,"
+ "DB_DISTANCE FLOAT NULL,"
+ "DB_AZIMUTH FLOAT NULL,"
+ "PREVIOUS_STATUS FLOAT NULL,"
+ "FIA_TREE_NUMBER FLOAT NULL,"
+ "FHM_TREE FLOAT NULL"
+ ")";
public static void main(String argv[]) throws Throwable
// Publish - an OKAPI sample
if(argv.length == 2)
CONS_SCHEMA = argv[0] ;
DEFAULT_PASSWORD = argv[1] ;
//create required tables using standard jdbc
//DriverManager.registerDriver ((Driver)Class.forName ("oracle.jdbc.driver.OracleDriver").newInstance ());
DriverManager.registerDriver (new oracle.jdbc.driver.OracleDriver());
Connection c = null;
Statement s = null;
try
// Open connection to Mobile Repositoty/FIAFIELD schema as SYSTEM.
// Need the ability to grant resources, and connection to Mobile Repository user
//c = DriverManager.getConnection ("jdbc:oracle:oci8:@WEBTOGO.WORLD", "SYSTEM", "phwphw" );
// Remote connection. See attached webtogo.ora.
c = DriverManager.getConnection ("jdbc:oracle:oci8:@WEBTOGO.WORLD.YGG",
"SYSTEM", "phwphw");
s = c.createStatement ();
try
s.executeUpdate("DROP table FIAFIELD.ZMTR1TBL");
catch (SQLException ee)
ee.printStackTrace ();
try
s.executeUpdate(CreateTreeTableShortNames);
catch (SQLException ee)
ee.printStackTrace ();
try
s.executeUpdate("alter table FIAFIELD.ZMTR1TBL add constraint"
+" zmtr1tbl_pk primary key(subp, tree)");
catch (SQLException ee)
ee.printStackTrace ();
// Line 223 // create consolidator publications.
try
// *****!!!!! Unless the Webtogo.ora file is in the current working
// directory the connection is not made. This version of the resource
// manager must be looking for the file in the old 8i Mobile default
// directory. This is a definite problem. If the code was working, the
// addition of the webtogo.ora should have affect on the functionality
// of the code.
// The connection is made to the Mobile Server. At least no exceptions
// are thrown, provided the webtogo.ora is in the current working
// directory.
//oracle.mobile.admin.ResourceManager.openConnection(CONS_SCHEMA, DEFAULT_PASSWORD);
// I tried making a direct connect to possibly avoid needing to have the
// webtogo.ora file in the current directory. The direct coonect did not work.
// You can quickly convince yourself that the webtogo.ora file must
// be in the current working directory, by running the code with and
// without the webtogo.ora in the current working directory.
// The directory OraLiteHome\Mobile\Server\bin is in the PATH after
// after installation but the extension .ora is not in PATHEXT. The
// OraLite installer should put .ora in PATHEXT. I tried adding .ora
// to the PATHEXT, but it still could not find thw webtogo.ora file,
// and it should have. What is going on? I am a bit rusty on DOS so
// I may not have thing right.
// OraLiteHome\Mobile\Server\bin is the residing directory for
// the functional copy of the webtogo.ora file.
oracle.mobile.admin.ResourceManager.openConnection(
CONS_SCHEMA,
DEFAULT_PASSWORD,
"jdbc:oracle:oci8:@WEBTOGO.WORLD");
catch(ResException ee)
ee.printStackTrace (); // NULL Pointer Exception?
// The Mobile user is created, and then the function throws a resource exception.
// This is a serious problem with the code. One would assume that the user
// is not created if and exception is thrown.
// This appears to be a bug in the createUser code. The function should return
// false if the user is not created, and handle, or not throw the exception.
// The function always returns false. It does return true when a user is created
// because it throws an exception.
boolean bIsCreated;
System.out.println("Begin of why is ResourceManager not dropping users?");
// Line 277
try
// The dropUser function will not drop a user. I have tested the function
// by creating the user ZMPT1UA in the Mobile Server Control Center
// http://Yggdrasill.cfr.msstate.edu/webtogo
// so I know that the user exist.
// This function throws a ResException but it is not declared correctly
// since you cannot trap the exception as a ResException. It always tells
// me the view does not exist. What steps are required to get the function
// to work? What function calls need to be made prior to calling the dropUser
// function.
oracle.mobile.admin.ResourceManager.dropUser("ZMPT1UA");
catch (Throwable ee)
ee.printStackTrace (); // NULL Pointer Exception?
System.out.println("End of why is ResourceManager not dropping users?");
try
bIsCreated = oracle.mobile.admin.ResourceManager.createUser(
"ZMPT1UA",
DEFAULT_PASSWORD,
"ZMPT1UA", "S");
catch (Throwable ee)
ee.printStackTrace (); // Ignore exception
// Obsolete or depreciated function, according to documentation?
oracle.mobile.admin.ResourceManager.commitTransaction();
// Create CONS_SCHEMA user on the database with the same username, and
// password as the user on the Mobile Server side. This is why the
// DriverManager connection was made as SYSTEM/phwphw.
// Grant ALL to repository, and user on replicated database
// On the database side there is a user with un = fiafield,
// and pw = fiafield, which is the same as the Mobile Repository
// schema name/password pair fiafield/fiafield. Can this duality
// create a problem? Probably not.
// Need SYSTEM ADMIN privilages for the next two steps, and that is
// why the coonection was established as SYSTEM/phwphw.
// Make user, and grants for Publish to user CONS_SCHEMA, and ZMPT1UA
System.out.println("Pargress point D");
try
s.execute("Create user " + "ZMPT1UA" + " identified by " + DEFAULT_PASSWORD);
catch (SQLException ee)
ee.printStackTrace (); // ignore
try
s.execute("GRANT ALL ON FIAFIELD.ZMTR1TBL to " + CONS_SCHEMA + " WITH GRANT OPTION");
catch (SQLException ee)
ee.printStackTrace (); // ignore
try
s.execute("GRANT ALL ON FIAFIELD.ZMTR1TBL to " + "ZMPT1UA" + " WITH GRANT OPTION");
catch (SQLException ee)
ee.printStackTrace (); // ignore
/* This code is not needed to test the code
// Insert items into table FIAFIELD.ZMTR1TBL from FIAFIELD.HUSKY_TREE
String Statement =
"INSERT INTO FIAFIELD.ZMTR1TBL SELECT * from FIAFIELD.HUSKY_TREE WHERE PLOT = 1";
try
s.execute(Statement);
catch (SQLException ee)
System.out.println("FIAFIELD.HUSKY_TREE was not inserted into FIAFIELD.ZMTR1TBL");
ee.printStackTrace (); // ignore
c.commit ();
catch (SQLException ee)
ee.printStackTrace ();
finally
if (s!= null) try {s.close ();}catch (SQLException e1){}
if (c!= null) try {c.close ();}catch (SQLException e2){}
// The Consolidator class is not thread safe, and I will eventually
// need thread safety. The ConsolidatorManage class is thread safe.
//Consolidator ConsolidatorXX = new Consolidator();
ConsolidatorManager ConsolidatorXX = new ConsolidatorManager();
// Line 386
// Try opening a connection. Sample11 does not open a connection, but it seems
// like a logical first thing to do.
// At least with this connection the DropPublication, and AddPublication functions
// appear to work, or at least they do not throw exceptions. The DropPublication
// throws an exception if a publication does not exist? I tested this and indeed
// if I call the DropPublication function, and do not create the Publication again
// when I reenter the program the DropPublication function throws an exception, and
// produces the correct error message(The publication does not exist). There is hope.
// It is very disturbing that the program fails unless the webtogo.ora file is not
// in the current working directory. Because the OpenConnection functions of both
// the ResourceManager, and ConsolidatorManager both appear to need access to the
// webtogo.ora file, and they are finding them in the current directory, the
// logical conclusion is that both of the classes are attempting to open the
// webtogo.ora with the relative path webtogo.ora, and not the absolute path
// OraHomeLite/Mobile/Server/Bin/webtogo.ora. As this has to be the case, why
// is this very important fact not in the documentation? Or, am I wrong?
Connection conn = null;
try
//ConsolidatorXX.OpenConnection(CONS_SCHEMA,
//DEFAULT_PASSWORD);
//ConsolidatorXX.OpenConnection(CONS_SCHEMA,
//DEFAULT_PASSWORD,
//"jdbc:oracle:oci8:@WEBTOGO.WORLD");
conn = DriverManager.getConnection
("jdbc:oracle:oci8:@WEBTOGO.WORLD",
CONS_SCHEMA,DEFAULT_PASSWORD);
//conn = DriverManager.getConnection
//("jdbc:oracle:oci8:@WEBTOGO.WORLD",
//"SYSTEM","phwphw");
ConsolidatorXX.OpenConnection(conn);
catch (Throwable e)
e.printStackTrace(); //ignore error
// Publication name
Publication = "ZMTR1PUB";
try
ConsolidatorXX.DeinstantiateSubscription(Publication, "ZMPT1UA");
catch (Throwable e)
System.out.println("Could not Deinstantiate Subscription ZMPT1UA");
e.printStackTrace(); //ignore error
// Line 448
// There is no Consolidator.OpenConnection in the orginal sample11.java code.
// Why?. It appears to be neccessary. The only way I can make the sample11 code
// or this program work is to open a jdbc connection with the Consolidator.OpenConnection
// function. I assume that somehow the Consolidator.OpenConnection function was
// deleted from sample11.java.
// This try to drop a publication index does not work, because when I try
// to recreate the index in the following code it warns me that I have a
// bad column name for the index. So it thinks the index still exist.
// Why?. How do I get rid of the index?
try
ConsolidatorXX.DropPublicationItemIndex("ZMTR1IX1");
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.DropPublicationItem("ZMTR1ITM");
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.DropPublication(Publication);
catch (Throwable e)
e.printStackTrace(); //ignore error
try
//ConsolidatorXX.CreatePublication(Publication, Consolidator.OKPI_CREATOR_ID,
//"zMTR1.%s", null);
ConsolidatorXX.CreatePublication(Publication, Consolidator.OKAPI_WINCE,
"zMTR1.%s", null);
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.DropPublicationItemIndex("ZMTR1IX1");
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.CreatePublicationItem("ZMTR1ITM","FIAFIELD","ZMTR1TBL", "F",
"SELECT * FROM FIAFIELD.ZMTR1TBL", null, null);
catch (Throwable e)
e.printStackTrace();
System.out.println("Begin of how can drop this index and get rid of the warning?");
// Line 522
// I defined the index ZMTR1IX1 originally on the variable subp, and did not get
// any warning. I then changed the index variable for the index to id, and started
// receiving the warning to check the index column for typographical errors. Even
// if I change the index variable back to subp, I continue to receive the warning.
// How do I get rid of the index and the warning, so I can recreate the index for
// another variable? I quess the real question is "How to I completely remove a
// publication, and all of its parts so I can start over?
try
ConsolidatorXX.CreatePublicationItemIndex(
"ZMTR1IX1", "ZMTR1ITM", "I", "id");
catch (Throwable e)
e.printStackTrace ();
System.out.println("End of how can drop this index and get rid of the warning?");
try
ConsolidatorXX.AddPublicationItem(
Publication, "ZMTR1ITM", null, null, "S", null, null);
catch (Throwable e)
e.printStackTrace ();
try
ConsolidatorXX.CreateSubscription(Publication, "ZMPT1UA");
catch (Throwable e)
e.printStackTrace ();
try
ConsolidatorXX.InstantiateSubscription(Publication, "ZMPT1UA");
catch (Throwable e)
e.printStackTrace ();
try
ConsolidatorXX.CloseConnection();
if(conn != null)
conn.close();
catch (Throwable e)
e.printStackTrace(); //ignore error
// Obsolete or depreciated function, according to documentation?
oracle.mobile.admin.ResourceManager.commitTransaction();
oracle.mobile.admin.ResourceManager.closeConnection();
End of Publish.java code
Begin Compile.bat
set CLASSPATH = .;D:\jdk1.4.0\lib\tools.jar;D:\OraLite501\MOBILE\classes\CONSOLIDATOR.JAR;D:\OraLite501\MOBILE\SERVER\BIN\WEBTOGO.JAR;D:\OraLite501\jdbc\lib\classes12.zip;D:\OraLite501\MOBILE\classes\classgen.jar;D:\OraLite501\MOBILE\classes\servlet.jar;D:\OraLite501\MOBILE\CLASSES\OLITE40.JAR
set PATH= d:\jdk1.4.0\jre\bin\server;d:\jdk1.4.0\bin;D:\OraLite501\bin;D:\OraLite501\Mobile\Server\bin;D:\oracle\ora92\bin;D:\OraLite501\MOBILE\sdk\bin
d:\jdk1.4.0\bin\javac Publish.java
End Compile.bat
Begin Run.bat
set CLASSPATH= .;D:\jdk1.4.0\lib\tools.jar;D:\OraLite501\MOBILE\classes\CONSOLIDATOR.JAR;D:\OraLite501\MOBILE\SERVER\BIN\WEBTOGO.JAR;D:\OraLite501\jdbc\lib\classes12.zip;D:\OraLite501\MOBILE\classes\classgen.jar;D:\OraLite501\MOBILE\classes\servlet.jar;D:\OraLite501\MOBILE\CLASSES\OLITE40.JAR
set PATH= d:\jdk1.4.0\jre\bin\server;d:\jdk1.4.0\bin;D:\OraLite501\bin;D:\OraLite501\Mobile\Server\bin;D:\oracle\ora92\bin;D:\OraLite501\MOBILE\sdk\bin
d:\jdk1.4.0\bin\java Publish
End Run.bat
Begin webtogo.ora
USE_SYSTEM_CLASSPATH = NO
MODE = SERVER
PORT = 80
BASE_URL=/webtogo
ADMIN_TNS_NAME=WEBTOGO.WORLD
ADMIN_JDBC_URL=jdbc:oracle:oci8:@WEBTOGO.WORLD
APPLET_USE_THIN_JDBC = YES
THIN_JDBC_URL=jdbc:oracle:thin:@YGGDRASILL:1521:FIA.YGGDRASILL.CFR.MSSTATE.EDU
SITE_OFFLINE_PERIOD=0
CUSTOM_WORKSPACE=no
CUSTOM_DIRECTORY=myworkspace
DEFAULT_PAGE=myfirstpage.html
ADMIN_USER=8B37E78535B55525292A3A2929292999
ADMIN_PASSWORD=873515A838B85828292A3A2929292999
[EXTERNAL_AUTHENTICATION]
#CLASS=com.acme.SampleAuthenticator
# Web-to-go workspace's font
FONT_NAME=Arial
[FILESYSTEM]
#ROOT_DIR=%WEBTOGO_HOME%\server
#TYPE=O8
#TYPE=OL
#TYPE=OS
# Cache size in MBs
#CACHE_SIZE=10
MAX_CONNECTIONS=4
[DEBUG]
#ENABLE=YES
# The log file name.
#LOG_FILE=test.log
# Machine name and port where wsh.exe -m is running. Web-to-go
# will send debug output to that machine.
#MACHINE=
#PORT=100
[APPLICATIONS]
XMLFILE = ws1.xml
PACK_HELP=D:\OraLite501\mobile\doc\wtg\html\wtgdep.htm
[PUBLIC]
oracle.lite.sync.ConsolidatorServlet=/Consolidator
[CONSOLIDATOR]
# Installer will change these values
SERVER_VERSION=8.1.5
# 8.0.5 or 8.1.5
# Installer won't change these values
MAX_THREADS=3
JDBC_DRIVER=oracle.jdbc.driver.OracleDriver
CREATE_USER_OPTIONS_O8I=PROFILE CONSOLIDATOR_CLIENT_P DEFAULT TABLESPACE USERS QUOTA UNLIMITED ON USERS TEMPORARY TABLESPACE INDX QUOTA UNLIMITED ON INDX
CREATE_USER_OPTIONS_O8=PROFILE CONSOLIDATOR_CLIENT_P DEFAULT TABLESPACE USR QUOTA UNLIMITED ON USR
TEMPORARY TABLESPACE TEMPORARY QUOTA UNLIMITED ON TEMPORARY
TEMP=c:\\temp
WTG_PROXY_PORT=80
TRACE=NO
TRACE_ALL=NO
End webtogo.ora
Begin Mobile Server tnsnames.ora file
# TNSNAMES.ORA Network Configuration File: D:\OraLite501\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
WEBTOGO.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = YGGDRASILL.CFR.MSSTATE.EDU)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
WEBTOGO.WORLD.YGG =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = YGGDRASILL.CFR.MSSTATE.EDU)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
End Mobile Server tnsnames.ora file
Begin Database tnsnames.ora file
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
FIA.YGGDRASILL.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
FIA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
FIA.YGG =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
End Database tnsnames.ora file

7.0 WLC Code and Assurewave

Similar Messages

Maybe you are looking for