7.03 still not working with proxy - while 6.5 did !

Hello,
I am really annoyed. I tried to watch the special event, but my 6.5. player opened and told me that I needed 7 to watch this. So I downloaded it, installed it and No Go !!
I am asked to authenticate against our proxy/firewall, I type in my info and after some minutes I get the response Invalid Url.
Nothing in the prefs seems to change this behaviour.
Seems that Apple has broken something, that used to work beforehand. Hope that this is fixed soon.
Greetings
Thomas

I also had this problem. WIth the old 6.5 there was a way within the preferences to specify SOCKS and HTTP proxies.
With 7.0 this was removed. It appears that it now reads these settings directly from the IE proxy settings. If you're having issues you may need to go into the IE proxy settings and fiddle there.
Good luck !

Similar Messages

Bluetooth in Subaru still not working with ios update

Bluetooth is still not working in my Subaru with my iphone 6. I've updated the iOS to 8.1, done most of the suggested tips I've read on line and my phone will still not find my car's (or my plantronic headset). Bluetooth does work with my jawbone speaker, but that's it. I'm looking for any new suggestions. Thanks

I just sold my Motorola RF-850 that was hooked up to my GTO today because it wasn't working with my IPhone.
I can't believe you paid for the Holden one.
Anyway good luck.
AcePilot

New iSync 2.2 still not working with Nokia 6230

I was very pleased to see iSync 2.2 come out yesterday and have support for the series 40 phones - however after Installing 10.4.6 on my new MacBook Pro, and opening iSync, the phone is found by Add Device, but when I go to add it I get the message:
"Your phone, 'xxxx' does not work with this version of iSync.
To enable this phone to work with iSync, contact the phone’s manufacturer or your service provider to update the firmware on your phone. For more information, visit the iSync Support website."
The picture comes up but even if I drag the phone icon to the iSync window I can not sync it - 'Turn on Device Synchronization' will not stay ticked and clicking on Sync ends in a window saying it can't sync until I add a device to iSync.
The Phone is properly paired with the computer through Bluetooth Device Setup. (Address Book works with it just fine, as does file browsing)
Has anyone been able to get their series 40 or more specifically 6230 phones working with iSync 2.2?
Many thanks
Mark Burton

Same error message here.
I upgraded the phone's firmware from 4.44 to 5.50 this morning and IT WORKS great with iSync 2.2!!!!!
Thank you Apple.
Vangelis
I was very pleased to see iSync 2.2 come out
yesterday and have support for the series 40 phones -
however after Installing 10.4.6 on my new MacBook
Pro, and opening iSync, the phone is found by Add
Device, but when I go to add it I get the message:
"Your phone, 'xxxx' does not work with this version
of iSync.
To enable this phone to work with iSync, contact the
phone’s manufacturer or your service provider to
update the firmware on your phone. For more
information, visit the iSync Support website."
The picture comes up but even if I drag the phone
icon to the iSync window I can not sync it - 'Turn on
Device Synchronization' will not stay ticked and
clicking on Sync ends in a window saying it can't
sync until I add a device to iSync.
The Phone is properly paired with the computer
through Bluetooth Device Setup. (Address Book works
with it just fine, as does file browsing)
Has anyone been able to get their series 40 or more
specifically 6230 phones working with iSync 2.2?
Many thanks
Mark Burton

Canoscan 9950F still not working with 11/26 fix from Canon

Just reported this to Canon. Image Capture and VueScan both work. I can get the scanner to work on a MBP but not on the G4 iMac .... except on a fresh install and only one user account. I you create a 2nd user (not even migrate data, just create a 2nd user), the Canon Toolbox appears to lose its pathing to the scanner driver. Bizarre.
I've deleted the TWAIN driver manually and using the Canon utility (from the web site). I've installed, reinstalled, uninstalled every combination of Toolbox and TWAIN driver imaginable. So it's back with Canon .... close but

This may not help you, but here is what I found.
I have a Flatscreen G4 iMac 1.2G. I have had no end of trouble with the USB ports since moving to Leopard.
The first problem I had was that TimeMachine would not work with my Seagate 500G FreeAgent disk. Sometimes it would not mount, file corruption etc. Thought I had a stuffed USB adaptor.
Somewhere amongst this greif I notice that my Canon LIDE50 scanner would not work any more.
There are numerous threads around the place on this issue. This scanner is claimed to not work with Leopard. Anyway, at this point I disconnected the scanner and also upgraded to 10.5.1. TimeMachine now works fine.
Since then, the scanner has been on our MacBook Pro using BootCamp. I did try Vuescan, it does work, but I'd rather use the Canon tools for what I'm doing.
Tonight I did a bit of poking around to make sure all the files for the scanner installed in the right places. During this process I notice the USB disk had gone missing again. To cut a long story short, the USB disk and the Canon LIDE50 scanner are mutually exclusive. Plug only the scanner in, it works. Plug only the disk in, it works. Plug them both in, neither work! At this point I'm shutting down and restarting to change them over, but at least I have a work around.

Airplay Mirroring still not working with OSX 10.9.3

I upgraded yesterday, but the mirroring is still NOT working.
I hear the sound, but don´t see the image.
The option "DELL 2001FP spiegeln" is not selectable.
What am I to do?

I've branched this to it's own thread, since the issue you're experiencing is unrelated to the one you replied to, and it would be confusing to try and handle them in the same thread.
Please provide as many of the follow details as possible, so I can attempt to reproduce the issue you're describing (I realize you've provided some of it):
Read Before Posting: How To Get A Useful Answer To Your Question

I messaging still not working with ios7.3 update

My I Messaging not working with IOS 7.3 update. I have an Ipad2.

I have turned I messaging on and off and I have reset network settings. Ugh

Proxy Settings still not working with new 3.1

The new 3.1 of Safari for Windows still does not work properly with proxies (PAC files) with regards to using current logged on User Credentials when a Proxy requires authentication. Anyone have similar issues?

3.18.8 @ 3:58PM NOPE NOT FIXED...
MY browser is still crashing when trying to go to secure websites behind a corporate firewall (specific ISA 2006)
The problem is with the way Sfari Handles Secure website request
Firefox works because it uses its own module.
----"First of all I'm running Safari on my Leopard
This computer is on a corporate network behind ISA Server 2006
I'm able to Authenticate to go to the internet but when I try to go to a secure website (example https://www.bankofamerica.com )My browser Crashes.
I was expecting the new release of Safari to fix this but I'm still having the same issue.
Looks like the problem is the way this browser handles secure connection requests from behind a corporate firewall.
Any one has a clue how to fix this?
I havent been able to find any acceptable fixes for this problem (with exception of running a proxy server on this computer such as squid)
Thanks ..

"Push" E-Mail still not working with iPhone!

I'm not sure what the problem is here with Yahoo and Apple but to this day I still encounter very big issues with push E-Mail regarding Yahoo and Apple...it just doesn't work! I now have a new iPhone (2G, 16GB) because I dropped my old one and the screen cracked (cement ouch). Anyways I got my new phone last week (via eBay) and once again push mail is not working. I either have to manually check or mail comes in when it feels like it...in some cases HOURS later! Or if my phone is locked/asleep the mail doesn't come into my phone until I pick up my phone and start using it. Yesterday I went to go use my phone, I slid the slider to unlock it to bring me to my home screen, the mail icon showed no mail. The next thing I know all this mail starts pouring into my phone (22 messages to be exact)! I was like geeze...this is so messed up!

Push email continues to not function properly for me as well. The only time it ever works is if I'm actively on the phone after its been sleeping for a while, or when it polls for my other email accounts (in which case I get my "push" email at the same intervals as my regular email, making push worthless).
None of the other functions of the iPhone does this. When I receive a call or SMS text message, my phone notifies me immediately. What is the purpose of having "push" email that notifies me when I received new mail if I have to still manually check my device? This has been one of the iPhone 3G's weaknesses since launch and STILL has yet to be fixed.
Running iPhone 2.2. Software 2.2.1 did not address any changes with Mail.

FireFox 3.6.16 still not working with Flash!

Since updating to the latest version of FireFox 3.6 I have not been able to watch flash video's on YouTube and other sites, also any flash based content is blank or black.
I'm using Mac OS X 10.5.8 on a G5 PPC so Flash 10.1.102.64, the latest for PPC Mac's.
I've gone through all the usual steps of disabling plug-in's and extensions with no luck.
I'm also using the latest Safari 5 and it is still working with YouTube and other Flash sites.
ETA - Just found something weird, if I launch the QuickTime Player (not the plug-in) after launching FireFox then Flash appears to act normally, even after quiting QT.

@cor-el
Thanks for clearing up my misunderstanding. As i understood now it is in fact only a "DOM storage data" topic.
Quote from betterprivacy:
''"Disabling DOM storage (instead of deleting the file on shutdown) causes a website script to throw an exception. This means that the execution of the script is aborted immediately, not just the DOM storage instruction is ignored. None of the following script instructions would be executed, even if those instructions have nothing to do with DOM storage. That is the reason why -with DOM storage disabled- sites like CNN.com will cease to play videos."''

Java Web Start not working with Proxy

I have Java Web Start program not listening to proxy settings. It tries to access localhost using our proxy settings, but with no user name or password. I'm wondering if Java Web Start has proxy settings somewhere. I'm not sure since when we disable the proxy settings the program works without issue. Any thoughts?
Thanks

For instance Safari uses those System Proxy settings, Firefox uses it's own!
So Java is using it's own, now we're waiting for an expert to drop in!

HP photosmart c309g still not working with os maverick???

i dont understand why this is still not fixed - over a year later!!
I'm not sure wether to get rid of my HP pinter scanner or my mac!!
Everytime i scan i get a black page- using apple preview is a joke.
According to the threads people were complaining about this in 2013.
Please if there is a real solution to this problem let me know!

Hello @mpaige , and Welcome to the HP Community!
I read your post about how when you scan with Apple Preview, the scan turns up all black.
Although there is no driver or software available for the Photosmart C309g model on Mavericks, meaning you do not have the option to scan using HP software, you do have two other method options to try and scan.
Click this link and see under "How do I scan with the built-in driver":
Installing Your HP Printer Driver and Software for Mac OS X
Also, you can try downloading this driver from Apple, that might help too:
HP Printer Drivers v3.0 for OS X
Just a tip: Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Also a basic reset might help as well:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
If you find that when you make standard copies from the front panel of printer, that they also turn out black, the printer itself may have a hardware problem. If this is the case, I'd suggest calling HP directly.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope my post was informative, have a wonderful Tuesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Palm Pre still not working with IMAP on Lotus Notes

Even after Web OS 1.1 I still can not get my Palm Pre to Sync with my works IMAP Lotus Notes. We use a self siged cert, so I did a manual move of the cert to my Palm Pre (instructions I got on this site) Next I instlled the cert with the Cert Mgr. It installed fine. When I run a manual sync all I get is the yellow error triangle. It does pull down all my Lotus Notes E-Mail Folders but no E-Mail. I know this config is fine, becuse I can duplicate the setup in my PC E-mail Cleint Thunderbird and it works fine to send a rec mail. Can someone from this site or Palm Support help. I am going to have to move to the I-Phone if you can't get this working soon. Other people must have the same problem.
Thanks Again....
Post relates to: Palm m515

Don't feel alone in this, I have the exact same issues, folders show up but not emails.
I am a network engineer by trade and have tried all of the listed solutions and many unlisted solutions.
I think its a case of IBM not caring about mobile phone users in general and IMAP standards in particular and Palm not caring a great deal about Domino users with Palm Pre's because there are likely not too many of them.
But hey, they got their money from me for the phone so why should they care anymore?
Some of us have to use Domino, no choice, we had hoped to use Palm Pre's. I can get IPhones to work with Domino and IMAP so I guess thats going to be one part of the market Palm is going to lose... Its Palms choice.

Access Restrictions still not working with latest firmware

Linksys WRT54GS V5 with firmware v1.52.2
I cannot believe what a frustrating experience this is. All I want to do is block facebook.com from my two high schoolers until they’ve done their homework.
Starting out, it simply did NOT work, and I discovered from this forum that the initial firmware did not work for this feature. So here is what I did:
- Downloaded v1.52.2 firmware, which is indicated as being the latest for this router
- Upgraded the router, per the instructions with this firmware.
- Pressed (and held)the reset button for the indicated 30 seconds
At this point, my router switched back to the default access point name and access password. Fortunately, I had backed up my configuration, so I then:
- Loaded my previous configuration that included my Wireless security settings, different AP name, etc...
- Powered down, then back up router, cable modem.
Router now works wireless as before, but Access Restrictions still does not restrict. Router does list the correct firmware on the admin screens.
Here is how I sent up my one (and only policy)
Internet Access Policy: 1(facebook)
Status: Enable
Enter policy name: facebook
PCs: Allow checked
Days: Everyday checked
Times: 24 hours checked
Blocked Services: NONE
Wewbsite Blocking by URL Addresses:
3 entered, they are:
http://www.facebook.com
http://static.ak.facebook.com
http://apps.facebook.com
Website blocking by keyword: All 6 boxes empty
This was easier to do on my old netgear router, and it also actually WORKED. ARGHHHHHH

Thanks, but that did not work either. It seems to me that, entering mac addresses ended up totally taking away all internet access for the computers on the MAC list. This is really pathetic that a concept that on the surface seems so simple, as in 'deny access to hostname xxx.com' can be so difficult to implement. If there wasn't the suggestion that this were a feature of the router, I wouldn't care. But it *is* supposedly a feature, and the feature simply does not work.
It seem to me that LinkSys has too many mutually exclusive options on a single page. It would be easier to grok if the hostname filter had it's own page, then you wouldn't be wondering what the 'deny/allow' check box did or did not do in conjunction with your selections.
Does the feature work or not? As I mentioned, this was childishly easy to accomplish on my Netgear router. If it didn't suck so bad in other areas of performance, I'd simply go back to it.

SDM still not working with Java v6u15

I keep waiting for Java to work some day with their updates on Cisco SDM. Update 14 at least allowed SDM to open. But the new update 15 still hasn't passed the test of clicking on the Configure button and then the Additional Task button. It just doesn't do anything. If it is something that Cisco can fix, please be aware.
Thanks,
.. Jim ..

Hi Jim, you need to downgrade the JAVA version on the computer you want to use SDM.
SDM does not support java after: 6u3.
Cisco SDM requires Sun Java Runtime Environment (JRE). The following versions are supported:
â¢JRE 1.5_09
â¢JRE1.4.2_08
â¢JRE 1.5.0_06
â¢JRE 1.5.0_07
â¢JRE 1.6.0_02
â¢JRE 1.6.0_03
As per the release notes.
http://www.cisco.com/en/US/docs/routers/access/cisco_router_and_security_device_manager/software/release/notes/SDMr25.html
This will resolve your issue.
Cisco does not plan to fix this as SDM is end of life.
The product that replaces SDM is CCP: Cisco Configuration Professional, that one works with JAva 6 update 14, but it's a different product. It's also a freeware you can download from our website.

Internet Accounts (Mail/Calendar) still not working with Google account

Half a year after the release of Mavericks, it's still not possible to use Apple Mail and Calendar with my Google account. There's always the same error message:
There was a problem setting up the account.
An unknown error occurred.
I don't understand why this problem couldn't be fixed yet.

I have the same setup and it works just fine.
Reboot into Safe Mode and try again. Post back with the result.

7.03 still not working with proxy - while 6.5 did !

Similar Messages

Maybe you are looking for