7.1.1 Display Level - behaviour changed and doesn't function as in manual

In the matrix editor, the move up display level (the little close box to the left of the local "edit" menu) used to behave as described in the reference guide, on page 22:
Display Levels in the Editors
In the Matrix and Hyper Editors, this step up the display hierarchy means that you will then see an Arrange window. In this scenario, a change to the lowest display hierarchy level will cause the relevant editor to reappear. At the Arrange level, you will see the local menus of the Matrix or Score Editors, which also contain all of the Arrange window functions. Double-clicking on a MIDI Region opens the Hyper, Matrix, Score Editor, or Event List display of the contents of the MIDI Region. Use of this facility, in conjunction with the UDL button allows you to quickly switch to another MIDI Region, and edit its contents. "
With a region selected for editing, clicking it once moves up a display level, showing all the notes in all sequences. Clicking it again should turn the matrix window into a pseudo arrange window - you can then select a different region to go back down into the matrix editor again.
But this doesn't work for me anymore, in 7.1.1, and I cannot find any mention that this behaviour has changed in the readmes etc.
Did they change this behaviour? Is it a bug? Does the same thing happen to you or is it just me?
Many thanks

Note: This works correctly in the hyper editor, it goes back to a psuedo arrange page. But the matrix window does not...

Similar Messages

  • I send out emails with proper grammar.  People would reply returning my email and I would notice the grammar has changed and doesn't make sense.  What's causing this problem?

    I send out emails with proper grammar.  People would reply returning my email and I would notice the grammar has changed and doesn't make sense.  What's causing this problem?

    Have you actually compared what you sent (in your Sent Mail Folder) with what is in the reply?
    Note that Auto Correction can often change what you think that you are typing.
    Are you sure that the return message has your original message intact and not edited by the recipient?
    Bottom line: if the recipient does a simple reply to your message with the original message attached the system is not going to edit your message.

  • Finder/Window-Content not responding to changes and doesn't refresh

    Hi,
    i have a very strange Problem with the Finder since i upgraded to 10.6.4. The Finder doesn't react to changes from certain Applications.
    I noticed the effect in the Folder 'Downloads', f.e. if i try to download a file. Usually two files appear, the intended file with 0 kB and another temporary file. After the download is complete the temporary file will be deleted and only one file remains.
    Usually the whole process is visible and shown in the finder window. After the update it isn't which means that if i download a file, the Window content does not reflect the changes and the new files are not shown, even after the download is complete. To see the new files i have to trigger a change, either by creating a new folder or by changing the location (moving up a level).
    Interesting enough this only happens with certain Applications like Firefox or 'the Unarchiever' (a compression tool). If i download a file with Safari the temporary files and the downloaded files are shown in the window content without manually triggering a change. If i use 'keka' (another compression tool) the changes are also immediatly shown.
    In order to narrow down possible errors i have taken different approaches:
    a) i intently scanned and watched the console and read all error reports. There are no errors shown (with firefox or the unarchiever).
    b) I created a new user profile and the effects are the same.
    c) i ran 'disk utilities' and scanned the Access priviliges. Apart from the common problem within /system/java/... there are no problems
    d) i ran 'onxy' to clean the user and system cache. I rebuild the LaunchService Database.
    I didn't fix my Problem.
    That leads me to conclude that the problem is located in some system-function which is correctly triggered by some applications and apparently not by others.
    My Questions:
    1. Does anyone else has this problem and possibly a fix?
    2. Does anyone know how the finder is triggered by applications in order to refresh a window?
    tia,
    jc

    Hi Jeanclaude,
    You've described the problem well and took some excellent troubleshooting steps
    b) When you created the new profile, were you still engaging your third party apps, or are they installed in log-in items?
    1. It would be interesting to try a Safe Mode startup (It will take more time to startup in Safe Mode because it runs a directory check.)
    2 If step 1 doesn't turn up anything, re-install from your 10.6.x install disk (10.6 has the ability to "install in place" without touching anything other than system specific files.) Just pop in the disk, double-click and follow the prompts. Remember to uncheck language localizations if you don't use them & Printers except the one/ones you use.
    Let us know your results after these 2 steps.
    -mj

  • HT2811 Cinema Displays 27", blank screen and doesn't come on.

    I have two Cinema Displays 27" on a Mac Pro, one display powers up and works fine, the other stays blank with the light blinking three times. Short, Long, Short, meaning my power adaptor is wrong, but switching adaptors doesn't work.
    I have read the Apple article about the monitor things it's using the wrong adaptor. But mine I've been using is the correct one for the size and it even works when I switch adaptors and leads with my working display.
    Not sure how to fix this. I've tried unplugging everything, and plugging one thing in at a time and restarting to try and isolate any problems.
    Any suggestions?

    Hi Rocky Rakoon,
    Thank you for your post, and welcome to the Apple Support Communities.
    I understand that your Apple Cinema Display is not turning on upon startup. I'd like to reset the following, as it may resolve your issue:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    You may also want to reset your computer's PRAM:
    OS X Mountain Lion: Reset your computer’s PRAM
    http://support.apple.com/kb/PH11243
    Note: Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
    For more troubleshooting directly related to the Cinema Display, see this resource:
    Apple Cinema Display: Troubleshooting steps
    http://support.apple.com/kb/HT2810
    Thanks,
    Matt M.

  • Help with masking tool not working. my brush isn't making any changes and doesn't show mask overlay everything else is ok, we have reset brushes and tools uninstalled and re installed program nothing works

    anyone have any idea's to fix

    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Safari screen grayed out and doesn't function. Help.

    Suddenly, the Safari browser stopped working. The screen appears grayed out and touching buttons in the Safari content area doesn't do anything. The search and address windows work and new pages load, but they don't function. The back and forward and other buttons also don't work.
    I haven't changed anything (that I know about)since the last time everything worked a few minutes ago.
    TIA for your help.

    Have you tried resetting the iPad?
    reset iPad. Press and hold both the Sleep/Wake button and the
    Home button for at least ten seconds, until the Apple logo appears.

  • Ethernet port doesn't detect the cable is connected and doesn't function

    It's since this morning that I can't make my en0 ethernet port work. Please note: changed dozens of cables, hubs, etc. The port simply doesn't detect the cable is plugged in and the actual network interface configuration crashes with the following log upon system boot-up:
    Process: eapolclient [403]
    Path: /System/Library/SystemConfiguration/EAPOLController.bundle/Resources/eapolclien t
    Identifier: eapolclient
    Version: ??? (???)
    Code Type: X86 (Native)
    Parent Process: bash [368]
    Date/Time: 2009-06-23 19:42:52.593 +0200
    OS Version: Mac OS X 10.5.7 (9J61)
    Report Version: 6
    Anonymous UUID: 750052DD-67C5-4AEB-8843-9AB2F6B54967
    Exception Type: EXCBADACCESS (SIGBUS)
    Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
    Crashed Thread: 0
    Thread 0 Crashed:
    0 com.apple.CoreFoundation 0x96ff159b CFDictionaryGetCount + 43
    1 com.apple.CoreFoundation 0x96ff435d CFDictionaryCreateCopy + 29
    2 eapolclient 0x000056ba Supplicantupdateconfiguration + 49
    3 eapolclient 0x00003316 main + 1303
    4 eapolclient 0x00001d06 start + 54
    Thread 1:
    0 libSystem.B.dylib 0x90be86fa select$DARWIN_EXTSN + 10
    1 libSystem.B.dylib 0x90bca155 pthreadstart + 321
    2 libSystem.B.dylib 0x90bca012 thread_start + 34
    Thread 0 crashed with X86 Thread State (32-bit):
    eax: 0xa087d4ec ebx: 0x96ff157e ecx: 0x00000001 edx: 0x00000010
    edi: 0x001021c0 esi: 0x00000000 ebp: 0xbffff6a8 esp: 0xbffff690
    ss: 0x0000001f efl: 0x00010283 eip: 0x96ff159b cs: 0x00000017
    ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
    cr2: 0x00000000
    Binary Images:
    0x1000 - 0x8ff3 eapolclient ??? (???) <601ef87898001b311ead6372f01bdc5f> /System/Library/SystemConfiguration/EAPOLController.bundle/Resources/eapolclien t
    0x21000 - 0x37fe4 com.apple.EAP8021X 9.0.5 (???) <a7b029e76077ad0f1decd8912359f590> /System/Library/PrivateFrameworks/EAP8021X.framework/Versions/A/EAP8021X
    0x42000 - 0x6cff8 com.apple.framework.Apple80211 5.2.7 (527.2) <5982190f9caa25fca18b8753671d0d64> /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211
    0x8fe00000 - 0x8fe2db43 dyld 97.1 (???) <100d362e03410f181a34e04e94189ae5> /usr/lib/dyld
    0x90b98000 - 0x90cffff3 libSystem.B.dylib ??? (???) <b47c8e6e45aef620730710a732bf1930> /usr/lib/libSystem.B.dylib
    0x92188000 - 0x921e5ffb libstdc++.6.dylib ??? (???) <f75e5133d72769de5ce6c06153fc65f6> /usr/lib/libstdc++.6.dylib
    0x92ee9000 - 0x92f14fe7 libauto.dylib ??? (???) <2e44c523b851e8e25f05d13a48070a58> /usr/lib/libauto.dylib
    0x9433f000 - 0x9441ffff libobjc.A.dylib ??? (???) <400e943f9e8a678eea22a1d1205490ee> /usr/lib/libobjc.A.dylib
    0x945fd000 - 0x94689ff7 com.apple.framework.IOKit 1.5.2 (???) <97b9f9d584f48891377f0481b9104434> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x947c8000 - 0x947d6ffd libz.1.dylib ??? (???) <a98b3b221a72b54faf73ded3dd7000e5> /usr/lib/libz.1.dylib
    0x95697000 - 0x95868ffb com.apple.security 5.0.5 (36371) <c13e0bb1acfdcf94be4d3ee118ef190e> /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x95938000 - 0x9596ffff com.apple.SystemConfiguration 1.9.2 (1.9.2) <eab546255ac099b9616df999c9359d0e> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    0x95a2f000 - 0x95ae1ffb libcrypto.0.9.7.dylib ??? (???) <9d714c92872a93dd127ea8556b2c8945> /usr/lib/libcrypto.0.9.7.dylib
    0x96faf000 - 0x970e2fef com.apple.CoreFoundation 6.5.6 (476.18) <2d52bab73660117571bd6486dc318f8e> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x970e3000 - 0x970e7fff libmathCommon.A.dylib ??? (???) /usr/lib/system/libmathCommon.A.dylib
    0x9722b000 - 0x97232fe9 libgcc_s.1.dylib ??? (???) <e280ddf3f5fb3049e674edcb109f389a> /usr/lib/libgcc_s.1.dylib
    0x97315000 - 0x9744eff7 libicucore.A.dylib ??? (???) <cac059ebdac7d9a63ee0f7a648c9f6cf> /usr/lib/libicucore.A.dylib
    0xfffe8000 - 0xfffebfff libobjc.A.dylib ??? (???) /usr/lib/libobjc.A.dylib
    0xffff0000 - 0xffff1780 libSystem.B.dylib ??? (???) /usr/lib/libSystem.B.dylib

    I had a similar issue with a MacBook Pro. When connecting the network cable, the network preferences would show 'not connected'. I thought it was hardware, but when I transferred the user to another Mac, I found that that ethernet device all the sudden stopped working as well.
    I was able to get the ethernet back with:
    System Preferences
    ->Network
    ->Assist Me...
    ->Diagnostics...
    At some point the ethernet device went green and all was well.
    Maybe this will help.

  • Reinstalled Elements 9 and doesn't update.

    I needed reinstall my Elements 9 and now doesn't update and doesn't function well.

    Update from here:
    Adobe - Photoshop Elements : For Windows : Adobe Photoshop Elements 9.0.3 update

  • BSP for Creation and change and display of the documents in SAP R/3.

    Dear All,
    In SAP R/3 system, the documents can be maintained using the T-Codes CV01N, CV02N, CV03N for creation, change and display of the documents. Users is allowed to access to these transaction using the BSP application. The BSP page would be used to enable access the T-Code CV01N, CV02N, CV03N and allow uses to carryout the functionalities of check in and checkout of the document and the object links.
    do i need to replicate all these T-Codes in BSP application?
    If anybody hv done this...pl suggest me and give me the code.
    Thanks & Regards
    Pradeep
    Message was edited by:
            Pradeep Reddy

    if you want this out of BSP, yes you have to code all of them there is not easy way.
    but if the idea is to webenable these transaction and you dont have much time/resource to do it , easiest way is to go with ITS. downside of this is that you dont have much control over look and feel.
    If you are on WAS6.40 or above your application server comes with integrated ITS and enabling the same is quiet simple.
    Regards
    Raja

  • Unable to open the PM order in change and display mode

    Dear All,
    Am facing some issue that am unable to open the Maintenance Order in Change and Display mode.
    Can you provide the solution.

    Hi Thirupathi,
    Can you send us a screenshot or the error message information ?
    If it is due to status missing (SAP note available for the same)
    Regards
    Terence

  • PA30:Change and Display Mode

    Hi Friends,
    Can you Please provide me a solution for the Below Problem:
    When I go to PA30 and  try to CHANGE infotype 0001(Org Assmt),I get the fields "cost center,Position,job,org unit" in the Display mode I am not able to change those fields.
    Where can i change(In the configuration) these fields to be changed from DISPLAY MODE TO CHANGE MODE.So that in PA30 I can change these fields in IT0001
                                                                               Thanks In advance
                                                                                    Gopi Palleti

    Hi,
    You cannot change any of the field you mentioned in infotype 0001.
    You can assign a position using action 0000 through PA40 or by using copy option infotype 0000 in PA30. This will be in edit mode.
    Suggested to use PA40 so that all other relevant infotypes can also be updated accordingly.
    Rest of the components (Objects Job, Cost Center, Org unit etc)  has to be assigned to the respective position in PO13-->Relation ships.
    Note: Take care of the dates.
    Regards,
    Pranitha
    Reward if found Helpful

  • Aggregation level ZFI_FINGL is locked by the Change and Transport Organizer

    Dear,
    After transport from a dev to prod system I get this message on the planning modeler :
    "System is not set to changeable - objects are not changeable
    Aggregation level ZFI_FINGL is locked by the Change and Transport Organizer"
    Do you know how to fix it ?
    Thanks in advance,
    Thibaut

    Hi,
    By default the planning modeller configuration is added to the standard BEx transport (if it is not saved in $TMP). If there is not one set up then create one in the admin workbench transport connection.
    If you don't use this, then you can add the objects you wish to change manually into a transport before you change them - this also works.
    Cheers
    Mark

  • Aggregation level  is locked by the Change and Transport Organizer

    Dear All,
                   I have created aggregation level in the planning cube and transported to Production from dev, Once i transported to production i am not able to change the aggregation level in Dev, and also aggregation level is Inactive.  Aggregation level YPNC2 is locked by the Change and Transport Organizer. Please suggest how to activate the aggregation level in Dev.
    Thanks
    Christopher

    Hi,
      Kindly check the following,
    1. Is your aggregation level transported properly to the production system ?
    2. Was your aggregation level active while you were including it in the transport request ?
    3. Did you properly include the aggregation level in the request?
    If you find that the answers of all the above questions is "YES", then there should not be any problem in your aggregation level.
    Hope this solves your issue, if not kindly get back to me.
    Regards,
    Balajee

  • Is there currently a way to change this back to displaying the actually date and

    New helpdesk in version 7.4 seems to have gone back to using '1 week ago', '2 months ago' time stamps for ticket comments.
    Is there currently a way to change this back to displaying the actually date and time?
    This topic first appeared in the Spiceworks Community

    New helpdesk in version 7.4 seems to have gone back to using '1 week ago', '2 months ago' time stamps for ticket comments.
    Is there currently a way to change this back to displaying the actually date and time?
    This topic first appeared in the Spiceworks Community

  • Display Report Level Filter value and Input Controls Value

    Hi,
    Please let me know how to display Report Level Filter value and Input COntrol values in the report.
    I have 2 tabs in the WebI Report. The first tab has the summary details about the other tabs like reprot desc, prompt values, reprot filter values,etc.
    In the 2nd tab I have the actual report which has input controls defined, prompt values and global level report filters.
    Can anyone please tell me how to display the Report level filter values and the Input Control values in the first tab report.
    For ex: Tab 2 has a Report level filter: Region = NA
    I need to display in Tab 1 in as Region: NA
    I used the function ReportFilterSummary but that is giving me other details, I want only the object name and the value.
    Also how to dispaly the Input Control values in the tab 1.
    Please let me know if you have any suggestions for this issue.
    Thanks

    did you try
    =ReportFilter([Year])
    if you are making report filter over the year, it will return the value of the filter
    by the way, the filter should be applied over all the report not to a specific block to be able to get the correct value
    the Input control also considered as report filter, only if you're applying them on the level of the report, if you applying an input contron over a specific block or chart, you will not get the values for ReportFilter
    good luck

Maybe you are looking for