7.1 EAS server crashing after using migration wizard

We have 7.1 Essbase installed with EAS running on a Unix box and the Essbase server running on NT. If we use the migration wizard the EAS server crashes after the migration has run. Has anyone else experienced similar problems ?

Problem solved. The .sec file was copied from a different server and the database storage settings referred to a drive letter that was not available on the 7.1 box. This caused the app to crash and brought down the EAS box as well. I guess I'm a bit surprised that this type of problem causes EAS to terminate as well, given that (most types) of database corruption don't cause 6.x Essbase servers to terminate.

Similar Messages

  • TS1702 My problem started after installing smartsync which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crash after using them for awhile. I have remove the smartsync app but my phone still behaves the sa

    My problem started after installing "smartsync app" which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crashed after using them for awhile.While using my apps, they will black out after a little while and the phone returns to the starting page. I have removed the smartsync app but my phone still behaves the same way. At the same time the dates that accompany my messages changed to another language. How can these be rectified?

    Eek.  Sounds like something in the app caused some serious software issues.  You can try a hard reset, but I'd imagine you're probably going to have to do an iTunes restore to get it running right again.

  • Lost list of my wifi networks after using migration assistant / time machine

    After using migration assistant / time machine to set up my new Mac I now miss the list of stored preferred Wlan/WiFi networks. So the passwords of wireless networks I. Used in the past are all gone.
    Why is time machine not putting those on my new Mac as it does with many other settings?
    How can I manually grab this list from my old Mac and out it on the new machine?
    Will I find that time machine missed some other lists and settings as well?
    Thanks for help.

    I've been working through this procedure this week. It's pretty good, and when it works it appears to work quite well, but there's still some bumps in the road:
    (1) Once you've migrated, Time Machine itself seems to be a little confused and future backups may fail. You might have to start again by changing to a new Time Machine disk on your new laptop. You may lose your older backups, it's not yet clear to me.
    (2) You can't restore from a previous backup during the migration, only the most recent one. (You can restore from an older backup using tools on the install CD if you need to.) I suspect this won't be an issue for you.
    (3) Migration Assistant once you've logged in a Migration Assistant while you're starting up a new machine seem to work slightly differently. For example, sometimes the newest copy of the applications in your Applications folder (say, iMovie) is preserved, sometimes it makes an exact restore of the old Applications folder even if it's an older version of the application.
    Overall it's been a pretty good experience, and what you want to do does work, but be prepared for the possibility of some issues. I tried this back in 10.5.0 a few months ago and had a lot of problems, things seem better now under 10.5.2.
    - Ert

  • After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If th

    After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If this is recommended, I would need complete instructions on doing this. I have there serial number for the product.

    using migration assistant is problematic.
    at this point yes, you should uninstall everything migrated, clean and then reinstall properly using the installation files.
    cleaner:  Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    installation files:
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.

  • Mail not working after using migration assistant - what am I missing?

    Mail not working after using migration assistant - what am I missing?

    The mailbox list is divided into categories with headings in caps, such as ON MY MAC. When you hover the cursor over one of those headings (except for MAILBOXES), you should see the word Show or Hide on the right. Click Show. The  MAILBOXES category can't be hidden.
    In each category, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small disclosure triangle. If the triangle points to the right, click it so that it points down.

  • After using migration assistant to a new Mac 10.9.5, Outlook failed to open...mssge "Could not rebuild database -18000"

    After using migration assistant to my new MacBook Retina 10.9.5, Outlook failed to open...mssge "Could not rebuild database -18000"

    See if this previous discussion/link to microsoft support helps
    Re: There is a problem with the Outlook database.  Your database could not be rebuilt. [-18000]

  • HT4889 After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?

    After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?
    13-07-03 6:24:12.447 PM com.apple.launchd.peruser.502[1632]: ([0x0-0x5be5be].com.jetbrains.intellij[5805]) Job failed to exec(3) for weird reason: 13

    What is the exact name of the application you're trying to launch? Is it in the Applications folder?

  • Why is there no data on my new MacBook Pro after using Migration Assistant?

    Last night I launched Migration Assistent between my MacBook to my MacBook Pro.  It said it would take 12 hours so I left it over night.  When it finished this morning it said that some files were not able to be transferred.  But there is absolutely nothing on my new MacBook Pro.  Why is that?
    My TimeMachine backup disk has a cable that won't work with the new MacBook Pro so what other choice do I have to transfer data?

    epicsnow wrote:
    Last night I launched Migration Assistent between my MacBook to my MacBook Pro.  It said it would take 12 hours so I left it over night.  When it finished this morning it said that some files were not able to be transferred.  But there is absolutely nothing on my new MacBook Pro.  Why is that?
    See Problems after using Migration Assistant

  • Migrating from 9.2 to 10.0 portal using migration wizard in 10.0.

    Migrating from 9.2 to 10.0 portal using migration wizard in 10.0.
    I am getting the following errors:
    "A WebLogic Portal web application project should be added as a J2EE module a WebLogic Portal EAR project for proper deployment
    The associated EAR "MyPortalEAR" is not a Portal Application Services EAR          LabPortal     "
    I just followed the steps given in portal guide.
    Can some one help

    They are not available for download.
    Don't erase your 9.x on your system yet, you'll need to upgrade your firmware first:
    http://docs.info.apple.com/article.html?artnum=86117
    Otherwise you may end up with a permanently blank screen.
    Once your firmware is up to date, and you have at least 3.5 GB of at least a 10 GB hard drive free (see my FAQ*: http://www.macmaps.com/diskfull.html to learn what proportions you need free), you have at least 512 MB of RAM, and your data is backed up, you can upgrade to 10.3.9. I wouldn't bother with anything less. See this place*:
    http://www.macmaps.com/usedrefurbished.html
    on where you might be able to find 10.3 retail, which looks like *, and then you can upgrade to 10.3.9 from the combo update here:
    http://www.apple.com/support/downloads/macosxcombinedupdate1039.html
    10.0 to 10.3 are not tiger. 10.0 = Cheetah, 10.1 is Puma, 10.2 is Jaguar, and 10.3 is Panther. Ironically 10.3 is the fastest of the bunch.
    - * Links to images I asterisk, and my pages are hosted on a website I may get compensation from.
    Message was edited by: a brody

  • Upgrade essbase 9.3.1 to 11.1.2.3 using Migration wizard directly is it possible?

    Hi gurus,
    Please tell is that possible to migrate 9.3 to 11.1.2.3 using migration wizard ?
    Thanks in advance...

    Migration Wizard, which product are you talking about, planning? anyway here are the supported upgrade paths for 11.1.2.3 - Supported Upgrade Paths
    Cheers
    John

  • How to access Time Machine backups after using migration assistant?

    Can someone please help me with a TM issue.
    My HD died so I fitted a new one.  I figured that I would do a clean install rather than use TM to bring across a whole bunch of 5 year old junk and Aps that all broke after the Leopard -Snow Leopard -Lion -Mountain Lion upgrades.
    Installed 10.8.2 Mountain Lion, no issues.  Then used TM to drag and drop all the Applications I actually wanted, still good.  Then used Migration assistant to bring in the remainder of the settings, documents, mail etc.  For some reason you cannot migrate to the current default user so you have to create a new user profile which I did.  New profile was great so I deleted the other profile created at install that was pretty much blank.
    At this stage everything looks awesome but I noticed a video clip was missing in a Final Cut project so I went back into TM to retrieve it.  Now, all the documents in my old user profile in TM have a little no entry symbol on them and I do not have permission to look at those files.
    It looks as though I am now being treated as someone else on a different machine and no doubt TM will continue to work from this point on but how do I tell it that there is just one user on this machine and I want access to all the historic backups too?
    Any advice will be gratefully received.

    Many thanks for your response Mende,
    I am trying to specifically NOT do a full TM restore because I have some issues with some programs that I cannot delete.  I wanted a fresh start but from what I understand the TM will bring back everything as it was, including all the corrupt system files.  Fixing the TM permissions would be the preferable option.
    (I attempted to make a windows partition on my system once, thinking it would make some sort of clever fake-windows desktop supported by Mac coding. It actually wanted me to do a full windows 7 install on the partition with windows install disks so I cancelled the process.  Because it was a partial install I have not been able to uninstall the modifications and my system was crashing regularly due to some sort of stray code).
    Just out of interest, if your OSX install is perfectly good, will TM use that or will it still take your OSX from the TM backup?
    Apart from that one stray file, my system is now super clean and faster than ever... but maybe there are still some things missing that I haven't noticed yet.

  • Server crashes after router restarts, different routers, same result!

    Hello team,
    I've had this problem before, and it's getting really annoying.
    Every time I restart my router, my server will crash. It's almost always the case. I don't know why. It's not my router, I have tried 3 different routers. I thought maybe my RAM was faulty, that's not the case either. 
    Any thoughts?
    p.s. 
    my server always assigns its own DNS address to my clients, so when the server crashes, the clients are left without internet. How can I stop this from happening?
    setup: Server 2012 Essentials R2, 2 GB RAM, AMD X2 3800+ CPU.
    edit: this is the dump file it generates. I just restarted my router again, and exact same scenario:
    http://1drv.ms/1xooykW

    Hi MetaLRasaM,
    For Bug Check 0xC2, it indicates that the current thread is making a bad pool request. For more details, please
    refer to following article and check if can help you.
    Bug Check 0xC2: BAD_POOL_CALLER
    Would you please check if any drivers need to be updated or any Windows Update need to be installed? Please
    run sfc /scannow command to scan all protected system files. Any find? If perform a
    clean boot, will the same crash issue still exists?
    For Event ID 41, please refer to following KB and check if can help you.
    Windows Kernel event ID 41 error "The system has rebooted
    without cleanly shutting down first" in Windows 8.1, Windows 8, Windows Server 2012 R2, Windows Server 2012, Windows 7, or Windows Server 2008 R2
    As you know, troubleshoot this kind of kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Please refer to following articles
    and check if help you to analyze dump files.
    Crash dump analysis using the Windows debuggers (WinDbg)
    How to read the small memory dump file that is created by Windows if a crash occurs
    By the way, it is not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service
    and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
    To obtain the phone numbers for specific technology request, please refer to the web site listed below:
    http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
    If any update, please feel free to let us know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Cannot use Creative Cloud in new Mac after using Migration Assistant

    I used Migration Assistant to set up my new Mac (new computer is a Retina MacBookPro; so was old computer). I could not open any of my CC apps. When I open Creative Cloud Desktop App it is completely blank (no tabs for Apps, Fonts, Files, etc. -- No means of installing or updating apps). I uninstalled Creative Cloud and reinstalled (several times) but got the same results. I have also deleted all the Application Folders for CC apps that cam ever with Migration Assistant.
    Any ideas?
    Thanks

    Mac migration does not always work with Cloud programs
    Uninstall... run the Cleaner... Restart your computer... Reinstall
    -http://helpx.adobe.com/creative-cloud/help/install-apps.html
    -using the cleaner after uninstalling and before reinstalling will usually help
    -http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  • Can't Print after using Migration Assistant, more

    Hi,
    I recently used Migration Assistant to transfer all of my apps, files, data, ... from my Power PC G5 1.8mhz running 10.4.11 to my new-ish iMac 2.16 Ghz Intel Core 2 Duo with 10.6.8.  It seems like everything worked but I have a few issues.
    1.  I can't print anything now where as before I could on the iMac.  I get a printer error message
    Error: /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr failed
    2.  I can access all of the old files of the G5 but I have to log out of the iMac user to one of my old user accounts.  I want to get all of those files into my iMac account and delete those old user accounts.  I especiallly want to get the old photos into my iMac user account's iPhoto.
    Thanks for any help.  I'm feeling like an imbecile right about now.  ;-)
    -Don

    You should not delete files on the new machine after running MA. The only files I would recommend deleting would be data files you no longer need, however to be safe use Time Machine to back up your machine. One never knows when you may need something again.
    Regards,
    Roger

  • Desktop is missing after using migration assistant

    I just finished installing snow leopard after wiping my hard drive. I logged onto the guest account to use migration assistant and keep the same username. After doing so, I logged back onto my account. I can no longer drag anything onto the desktop. I tried copying the desktop folder from the deleted users folder that migration assistant created, but it doesn't affect the desktop whatsoever. How can I get my desktop back?

    Wipe and install Snow Leopard again and this time use the Setup Assistant instead.
    Use a Firewire cable (800 to 400 adapter if required) and hold T boot the old Mac into Firewire Target Disk Mode and then connect the cable when the Mac reboots after you just fresh installed Snow Leopard.
    This way only one account gets transferred like you intended.
    https://discussions.apple.com/message/16276201#16276201

Maybe you are looking for