7.1 with and audigy

Hey everyone, about two years ago i purchased the sbs 5. 560 speakers and a creative sb audigy , the system had some kind of problem where the front right jack in the subwoofer would not play music to any speaker or audio device put in it. Had I realized it wasnt software or something that could have been fixed i would have taken it back but i waited too long so now im out of warranty and i need a new speaker system. I was looking at the creative p7800's but i need to know if my soundcard can use these speakers to their full potential (meaning full 7. output). If i go to the audio hq under the control panel it says i can only have up to 5. channels, but if i go to control panel then to sounds and audio devices it says i can have up to 7., which should i listen too?

The Audigy will only put out 5..
You are free to select any setup in the Windows System, regardless of the actual audio Hardware installed.
However, you state here that your speakers are also 5.
If you only have 5 speakers and a subwoofer, then you are indeed limited to 5.
If you have already invested the money in a 7. system with 7 speakers and a subwoofer, then get any audigy 2 card (I just bought a ZS for $80). The speaker system was probably a lot more expensi've, and the rather cheap soundcard upgrade will let you use it.Message Edited by rstich on 06-5-2005 06:7 PM

Similar Messages

Windows Vista SP1 and Audigy 4 problem with

After updating to Vista SP the subwoofer and front speakers channels were disabled on Audigy 4. There are no signal from them. Now if I choose 5. option for speakers I have only surround and central speakers working. Tried to reinstall the driver but with no result.
The system was absolutely Okay with the same driver before SP. Help, please!!!
Driver version is 2-2-0002. It is the only thing support page has for Vista.

Do yourself a favor and uninstall that bug infested, intentionally crippled piece of crap driver and install this one,
http://forums.creative.com/showthrea...hread.id=30403
Vista x64 with an Audigy 4 here and it works and sounds better than it ever did in XP using Daniel's driver package.
Message Edited by stormy3 on 05-31-2008 10:00 AM

Best EAX Effects with SB Audigy 2 ZS and Headset?

Best EAX Effects with SB Audigy 2 ZS and Headset?Hi,
I have reinstalled Windows XP SP3 lately and installed just the Audigy_SupportPack_3_8 as driver for my Audigy2 ZS. I have a Sennheiser PC50 headset.
Now I can't get EAX to work.
The EAX setting in game is enabled and it sounds different than without it but I can only distinguish left from right but not top from bottom and front from rear.
Am I lacking any driver component?
How do I setup the audio device in Windows? Headphones or 4 speakers?
Do I need CMSS 3D? CMSS or CMSS2? Even if the game supports EAX?
What about optimize 3D-Effects for headsets? I use a headset, so I should enable it's
And also I can't find the suround mixer, is this not included in this support pack?
I mean this one:
Best Regards
sanni

Re: SB Audigy 2 ZS and Windows 7 - Full Package driver?T While Creative has written new drivers and some applications for Windows 7/Vista for the Audigy, they have not re-written or updated all of the original applications on the CD. This card is very old now. What Daniel K. did was take all of the applications or most of them, and tweaked them to properly install and include themselves in the registry on operating systems other than Windows XP. For the full and most recent package, check here:
http://forums.creative.com/t5/Sound-...009/td-p/53838
If the application you want is not included in his package, then you can try downloading the official Creative version and install it on your system in "compatibility mode" by right clicking the file, and choosing properties, and then the compatibility tab and choosing "Windows XP service pack 2 or 3" and it may or may not function.

CREATIVE And AudigY SE MadnessS!

CREATIVE And AudigY SE MadnessS!? Hi
WHich is the best driver verson for Audigy Se to use in Xp, I have full Driver Pack that comes with my Sound Card it's old,Drivers are of 2005 and Creative released Another set of drivers SBA_PCDRV_LB__04_006,Which is 2006 driver has not Microsoft WHQL Certified, and on 2007 another one SB24_VTDRV_LB__04_0077,Which is displaying my Audigy as SB Li've! 24bit under Sound & Audio Device properties,and the last 2007 version driver has so many problems When logon on to windows the logon sound is Automatically at High VOlume,It distorts,and all version of these Drivers lacks Treble,i should Pump up the treble In EQ to full get HIgh Frequencies Otherwise it's little bit Muddy,And 2007 Version has is faily Direct Sound Tests in Creative Diagonostic Utility.... There is some problems with Daniel_k Mod pack,even the latest support pack 2.6 , Sound is muddy in Games like Metro 2033,Nfs Most Wanted. PAX drivers are in Beta stage still Hope he will Fix the problem,So i'm Using CREATIVE Defalut Drivers, When Using Default one there is no Problem in games.... So Plz help me to decide Which CREATIVE driver Version IS best.... Plz reply..

Pookie,
I don't see any pink jack on that card. Are you using the same Audigy SE card as in this link? As far as I can see from the picture, there's only 4 jack(Blue, Green, Black & Orange).
Jason

Dtt3500 and Audigy Gamer, digital output only 2 channel unless its D

Ok I recieved a response concerning my last comment but unfortunatly it did not answer my question at all. I have a DTT3500 and a sound blaster Audigy Gamer hooked up with the digital out to the /8 din adapter. I try the advanced 3d demo that came with the Audigy software and I only hear the front 2 channels, no center and no rears. The demo where you move the little icons and sound moves along with it. I have 5. activated in my windows control center along with audioHQ and digital out only is selected. my DTT3500 has 4./5. digital selected along with dolby digital/pcm audio and digital in. I am not getting the effect of multisurround at all. My center works and my rears work because playing music I can use all 5 speakers. When I use the analogue outputs I hear multisurround from the advanced 3d demo but my center doesnt work. The analogue setup sounds better but without a center channel its useless to me. Am I doing something wrong? I am using the adapter and digital DIN, what gives? The only reason I noticed I wasnt getting surround was while playing games nothing comes from behind you even on 5. games. The goldmine demo doesnt even work right, when the bird flys behind you it disappears but there is still sound from the rears. Analogue fixes this without a center but the manual and setup say to use the digital din. Do I just have a setting wrong? I would like to experiance the full capacity of multispeakers in my games.

Dennis,
With these speakers the connection that I would suggest would be to use the Digital out on the back of the sound card into the DIN Input on the DTT3500's. This will require a converter cable for /8'' Minidin to standard DIN which can be purchased from here:
http://us.creative.com/products/prod...0&product=0375
You will also need a standard DIN cable (one should have shipped with your DTT3500's).
This should give you 5. with digital output only enabled on the Audigy.
Jeremy

XiFi and Audigy Take Over Input and Output from Bluetooth Head

I am having trouble with my bluetooth headset when making phone calls in any VoIP application (Skype, Yahoo!). I usually use the headset as the input and output for my VoIP bits so I can move away from my desk, etc... First, it worked under XP with my Audigy no problem. I bought a XiFi and installed the latest drivers and it began stealing my audio. Oddly, it does not do it until the call connection is made (so I hear the ringing in the BT headset and once the call is answered the system reverts to the mic, a Logitech USB, and main speakers, directly plugged to the soundcard).
I decided to put my audigy back in, because I was planning on upgrading to Vista and thought the XiFi may be bad. I did a fresh Vista install with the Audigy and everything worked (i.e. audio for phone calls stayed in my BT headset). I then upgraded from the Microsoft drivers to Creative?s Vista drivers and the problem then happened with the Audigy as well.
This leads me to believe that some sort of regression happened in the latest drivers. Everything else works great, games, movies, etc? but this is a show stopper because I want to use my bluetooth headset. I tried to downgrade to the Microsoft drivers but the card would no longer work. I have tried a driver install only, then added the software, removed that and did a full install. This is with BETA drivers on Vista, but the problem existed in XP as well which were not BETA drivers AFAIK. I have updated to the latest Bluetooth drivers as well with no luck.
I have confirmed this on two of my PCs and a friend of mine is having the same problem (XP, XiFi) so he went and bought a Skype phone which works correctly.
Thanks in advance

thanks for reply..
Please help me out with the entire setp by step procedure that i have to follow in getting the output in variable
i am using to get the emp name from webservices and i am passing empno from form.
INPUT STRING
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:tem="http://tempuri.org/">
   <soapenv:Header/>
   <soapenv:Body>
      <tem:ALL_GetEmpNamefrmID>
         
         tem:EmployeeLogin>{$ /process_data/@emp_no $}</tem:EmployeeLogin>
      </tem:ALL_GetEmpNamefrmID>
   </soapenv:Body>
</soapenv:Envelope>
when i hard coded emp no for testing EG: 1234 the out put i am getting the folloeing XML when i click tes
OUTPUT:
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
   <soap:Body>
      <ALL_GetEmpNamefrmIDResponse xmlns="http://tempuri.org/">
         <ALL_GetEmpNamefrmIDResult>SUBBA</ALL_GetEmpNamefrmIDResult>
      </ALL_GetEmpNamefrmIDResponse>
   </soap:Body>
</soap:Envelope>
Please help me out what are the steps i have to follow for getting out put SUBBA to my variable

Sound problem with the Audigy 2 va

Hi, I have asound problem with the Audigy 2 value. most of applictaions I played got sound. however, when I play FS2004, the sounds come on only the ATC voice in game playing, 5sec after the voice over, the sound is gone, and only when another voice is playing, the sound comes out. please helps out.

Shedden,
I would suggest going ahead with a cleansweep and reinstall of the card. Here are instructions on how to cleansweep and reinstall your sound card:
http://us.creative.com/support/kb/ar...asp?l=2&sid=72
Jeremy

X-Fi and Audigy 2's inability to talk to two concurrently running programs

Let me preface with saying I am very disappointed that there is such a nagging thing as this coming up with an X-Fi, or even the and Audigy2.
I, now, am on an AMD X2 3800+, on the Asus A8R-MPV D, with 2 gigs of ram, and a x900xt all powered by a Raidmax Volcano. My problem is that when I try to run two programs that are even CAPABLE of VoIP or even Microphone(Or Line2, in the case of the X-Fi) input, the first program that was opened gets a regular microphone input. Works great, in short.
The second program that opens however, isn't so lucky. In erratic bursts, the program recieves input from the mic/line2 even when not on sensitivity pickup.
For a visual representation I present this:
Program One microphone return (Opened first)
|-----------------------------|
Program Two microphone return (Opened second)
|-| |---| |-| |--| |-----| |--| |-|
I find this very odd, when my mates can do both ventrilo and whatever game we're playing and speak in both without any hitches, whereas my much more expensi've card can not?
I think it's important to note that I am NOT, I reapeat NOT talking to both programs at the same time. I can activate the input to each program individually and be fine, provided I am talking to the first program opened chronologically.
I know for a fact this is repeatable with all forms of Half-Life and 2, Battlefield, Teamspeak or any type of Voice communication. Proirity is not given to non-game programs, as I have duplicated this effect with game and then game.
Could anyone please help me figure this out, I'm at my wits end. I've been trying to figure this out since my A2, and internet scouring only really turns up answers to the effect of "make sure you're using 'push-to-talk'" or some other spoonfed answer.
Thanks in advance,
-V.

You've described this problem very clearly, but I'm afraid I don't have any good ideas. I've used the same motherboard, and I've never had glitches with my Audigy I or 4 (I don't have a 2, but it's supposed to be almost the same as the 4). Also I don't use the mic.
Are you using the latest DirectX? (dumb question...but it's all I can think of) Directsound might not be working right.
Message Edited by daflory on 08-27-2006 03:26 AM

Problems with my Audigy X-FI Platimun

Recently I bought the Audigy X-FI Platinum for my pc, replacing my old good Audigy Platinum.
These are my rig specs:
Asus A8N SLI Premium
AMD 64 3800 X2 Processor
ASUS GT6600 vcard
80 GB SATA Drive
60 GB SATA Drive
OS: Windows XP Professional SP 2 32Bit
Desktop Theater 5.1 DTT2200 Speakers.
The problem is that when I am viewing a DVD, playing any game or just listening mp3 the audio just go. I have to "play" a little with the cables that connect my speakers to the audiocard in order to get sound again. But when I hooked the speakers with my Audigy Platinum again I do not experience any kind of problem.
Any help would be appreciated!

No modified .inf file will enable the DTS or Dolby tabs in the Dell OEM XremeMusic. No hacked drivers will do either (maybe in the future).
I have the same card, and I've experimented a bit with it (I bought it to use it rather than to spend my time trying to enable functionalities that I actually don't miss), with the help of some "experts".
The only way to enable those functions involve component soldering/de-soldering on the PCB and firmware flashing.
This is not big issue as there's no warranty to void. Creative won't support this card, neither will Dell unless it was shipped as part of/upgrade of one of their systems.
But if you don't have the relevant skills and tools, unless you want to start hard-modding as a hobby, is just not worth it.
BTW, in my case the total cost was $9.00 deli'vered, so... what can I say? :P
Edit: I just saw in your screenshot the shortcut to "Owner's Manual" so I guess yours is a Dell system. Forget about hard-modding if you don't want to void your warranty big time.
And don't bother downloading the retail CD either. Save the bandwith for something else. There's a hack to install the applications of the retail CD on OEM cards, but it will make no difference whatsoever. It won't enable any extra functions on the card.
You can pick up the phone and complain to Dell if they didn't tell you about this "little" issue though. I have never bought a Dell desktop, so I can't really tell if they warn the customers about the card being OEM and limited in functionalities or not.Message Edited by MrToad on 08-23-2006 05:32 PM

Gigaworks and audigy 2 zs platinum lip sync is

Can smeone form creative please help me with this issue.
I have loads of external dvd players, a pacific, an xbox, 4 yamadas, accoustic solutions, scanvision, etc etc.
This is what is happenning, i am connecting the pacific dvd players optical out (or coaxial) It makes no difference as they both do it.
Press play to watch dvd, and start watching movie, the longer the movie plays and even in the first 5 minutes of playback the lip sync starts to go out, this is with the use installed decoder checked on soundcard and doly digital decode slected instead of default, spdif byass.
If i stop or pause the dvd and press play the lip sysnc comes back in, then it gradually goes out again.
Now it is not the dvd player. as it does this with the xbox as well, and the yamada, etc etc, this is on a clean installation of win xp pro, the only things that are in are chipset drivers, gfx card driver and the full installation of the audigy 2 zs platinum driver disc.
I connect the optical out or the coaxial ut to the optical in on aud 2 zs plat li've bay, and the same with the coaxial in on aud 2 zs plat li've bay, but only one at a time.
Can someone tell me why this is doing this, i am 98% certain i do not get this from using aux 2 in.
Also it always says unknown or invalid spdif signal in the decoder options.
Also it fails to initialize the dolby digital decoding when inserting the coaxial cable sometimes or rather 8 times out of ten, i have to either restart dvd player, or restart computer to get sound back.
I am not happy with either the s750 speakers whilst playing dvds or the audigy 2 zs card, the speakers are not very loud whilst playing most dvds and teh lip sync is not acceptable, i have used a dtt2200 and sb li've 5. witht the same dvd players and i never had this issue, granted this was on another computer, so i wil be try the s750 with the new computers onboard 7. sound chip to see if i get same issues, then i will be moving the sound card into another pci slot but i should not have to do this, as creative should have already tried this card in all available pci slots in all manufacturers motherboards to test the compatibility, if this issue remains can someone at creative tell me if they will give me a refund for the hardware of gigaworks s750 and audigy 2 zs platinum as www.dabs.co.uk will not give me a refund for these the speakers have only been in use for at most 2 weeks but are 3 weeks old and aud 2 card is about 0 weeks old but have only just been tested on my new computer as of at most 4 days as thats went i got all the other hardware to build up computer and i am most unhappy that dabs tell me they only do a refund or replacement upto 28 days, so creative it looks like the refunding of my money will fall to your company, but then after all it is your hardware, so you maybe can force dabs into giving me a refund , as after all it is your hardware and you will be able to reimburse dabs .

I tried it into all available pci slots on a fresh clean install of windows xp even the exclusi've pci slot was used, and even ehen it was in the other pci slots, it was not sharing an irq with anything anyways, it still does it whilst decodint the Dolby Digital Stream.
Have tried the driver updates for the card and it still does it.
I have the audigy 2 zs platinum witht the li've dri've I/O .
I have taken this card out and put my soundblaster 5. platinum card in, and the li've dri've IR that came with that card, and using the optical in or the coaxial in the same way as the Audigy 2 zs plat li've dri've ,and it decodes the 5. with perfect lip sync, however this is not true dolby digital decdong on the sb 5. card as you have to use the CMSS feature anyways on this card, so even though the ac-3 decode is ticked, it aint true Dolby Digital Decoding anyways.
So i took that card out, and put in my older audigy Platinum 5. card, and teh li've dri've that came with that card, and formatted windows, etc, then after xp went back in installed the audigy drivers etc, then connected the coaxial cable from external dvd player and This also plays the 5. with perfect lip sync, but again however this is not true dolby digital decoding on the audgy card, even tehough the option is selected ac-3 spdif decode in audio hq, You still have to use the CMSS feature to get kind of 5..
I know this to be true as when the 7. Audigy 2 zs plat card is in, when you play dvd from external dvd and use the optical or the coaxial to the fron of the li've dri've that came with audigy 2 zs plat, you get the Dolby Digital Logo appearring on the monitor screen to tell you that it is decoding etc, and teh Quality is very good and you can hear that it is a Dolby Digital 5. stream, APART FROM THE FACT THAT THE AUDIO GOES OUT OF SYNC WITH THE PICTURE.
So I know it has to be down to the actual hardware of the audigy 2 zs plat soundcard or the hardware in the Li've dri've that came with the audigy 2 zs plat soundcard. Its a shame that a lot more people that have bought this pruduct ie the audigy 2 zs platinum version, would not test there li've dri've soundcards dolby digital decoding using an external dvd player, so as we could get a better idea of the problem, AS there are only a couple of other users on this forum that have this harware and they have the same problem, so is it because these cards are faulty, or is it inherint in the hardware that cannot be fixed, cos it aint in the software, but how can we find out when no one seems to be able to tell for sure that a driver update will fix it.
Also Does the Audigy 2 zs platinum Pro suffer from this same lip sync issue whilst using the external dvd players optical out to the optical in to decode dolby digital 5. streams.
Saying as i spent over ?400 on the s750 gigaworks speakers and the Audigy 2 zs platinum soundcard, and that they are only 3-4 months old, and have just been installed into my computer (ie just opened within the last 2 weeks) i am really shocked to learn that nothing can be done and i have wasted a lot of money to get something that cannot do what it is advertised to do, And www.dabs .co.uk are reluctant to refund me my money on the basis that they only do refunds upto 28 days, so in my situation although i purchased the goods 3-4 months ago, i have only just got round to teseting the goods, as i needed the other bits to build computer up , like the case mnotherboard etc etc.
Come on creative, whats the score with this hardware.

Compatibility Between Audigy 2 Drive and Audigy 2 ZS GAMER C

Greetings,
I had a question about compatibility between an Audigy 2 Dri've and an Audigy 2 ZS Card.
Specifically, the Sound Blaster Audigy 2 Platinum Sound Card and the Sound Blaster Audigy2 ZS GAMER Edition Sound Card (SB0350).
Is the Audigy2 ZS GAMER Sound Card compatible with the Audigy 2 Platinum Dri've?
If this particular question has already been addressed in another thread, my apologies.
Thanks,
Benwajones

I searched (on "external" and "bay," but not "dri've" before I posted) but did not see this message. Is the reverse possible - that is a Audigy original dri've and an Audigy 2ZS sound card?

Medusa 5.1's and Audigy 2

I'm having a couple of problems. My Speed-Link Medusa 5. headphones are much quiter on the rear audio than on the front and centre. I have all the settings correct on my headphones so I'm wondering if there is a problem with the Audigy 2 ZS soundcard?
Has anyone else had this problem and how did you resolve it's
Thanks very much!
Gareth

Hi Gareth,
I haven't done it for a while so I can't really remember the details. If you go into the config application that came installed on the drivers CD, you can configure CMSS, THX and everything else...in here you can also configure your Surround set-up. You get a picture of a head in the middle of the room, and each speaker lights up as something is played through that channel. You can follow the Wizard through and it will help you lower/raise the volume for each channel.
I found I had to get the channels quite out of the centre position before it would sound like it should, which didn't seem right. I found it was less pronounced if I turned all the volume controls down slightly from max (which is what they were on) on the headphone controller.
Have a play around and let me know what works. Also, make sure you have the switchg on the headphones to "DVD" and not "CD", as "CD" turns them into stereo.
Rich

Will Xbox, Logitech X-530 5.1 speakers and Audigy 2 NX combo decode dolby digit

Hi there
I have a Xbox, Logitech X-530 5. speaker system and Audigy 2 NX sound card. I want Audigy 2 NX sound card to decode dolby digital from its optical-in? (optical in is from the XBOX) .. Is it possible? If yes, how? If not, what is the solution? Can Extigy external sound card do it's
Also, can be Audigy 2 NX external sound card be stand alone instead of always being connected to the PC? I just want it to be connected to XBOX to decode dolby digital 5...
Thanks!

it is relevant for me to post in here as someone was asking if the aud 2 zs plat dri'ves optical in or coaxial in could be used for connecting up to an external source sch as dvd player, xbox.
And i am in technical supports hand about my prouducts, so if yo u ban me i will be insisting they take action against you , as i have a valid reason for posting into these forums.
I have spent over ?3,000 on creative proucts, and the last 2 things i purchased from, creative cost ?450 the gigaworks s 750 speakers, and the audigy 2 zs platinum.
And therefore i am entitled to speak the truth.
Some one asked if the connection is possible, i am not the only person using the hardware that is having decoding lag whilst using optical in on li've dri've, it's just that not many people that have this hardware are using it like this, so they don't realise that they will have problems if they ever decide to use external dvd players, instead of the software ones like powerdvd windvd etc.
I am forwarding this entire thread to creative technical support guy that i am dealing with so he can see i am not doing anything wrong, you need to look at my other post with regards to the audigy 2 li've dri've having the exact pcb model number revisions etc, as the audigy2 zs platinum li've dri've, and that the combination of the audigy 2 li've dri've not being a connection that creative will offer support for, which is another thing i will be asking creative when i phone tech support up tomorrow, as i want to speak to someone higher up about this.
And you say you are testing this at home and cannot replicate this issue.
Can i ask what speakers you are using.
What soundcard are you using, are you using the aud 2zs plat version not the plat pro version.
Also what make of dvd player are you using to play dvds on, what spdif option your using in external dvd player ?
And what are the model numbers on your audigy 2 zs platinum li've dri've motherboard ?
Also what driver version are you using for the zs plat card ?
As i have used the supplied disc version, and updated to latest versions makes no difference.
Message Edited by 00db on 0-30-2005 0:57 PM

Cables for digital output for DTT2500 and Audigy 2 ZS

Hi, I lost the DIN cable for my DTT2500 speakers in a move. I've already read the article http://forums.creative.com/creativel...message.id=270
I'm having a hard time finding the correct cables to get the full digital experience out of my setup. DTT2500 5.1 speakers and Audigy 2 ZS. I game, listen to music and watch DVDs on my computer. Can someone link me some product pages where I could buy the necessary cables?

Hello Jason,
Could you tell me if I can still buy the cable below in order to connect DTT2500 with Audigy 2 ZS?
9-pin Mini Din to 9-pin Mini Din (2 meters - Red)
http://us.creative.com/products/prod...4&nav=features
If not could you provide me the wiring diagram of the Din?
What is the difference between the Red one and the Green one in the shop ?
Thank you

How to perform simultaneous multitrack recording with an Audigy 4 P

Dear Sir/Madam,
We are comming from the Uni'versity of Maribor, Slovenia. We recently buyed an Audigy 4 Pro Sound Blaster for our studio recording purposes. Here is the description of the problem:
We would like to record the speech database which will be used later to perform text to speech sinthesis (sampling rate of 96kHz, 24-bit resolution). Therefore, we need to SIMULTANEOUSLY record the stereo signals from 2 microphones located at different distances. That is, for each microphone we would have two channels which resulted in a requirement of recording 4 channels symultaneously!!!
We succeded to record the signals from either first or second microphone separately, but we couldn't record the stereo signals from the both microphones simultaneously!!! Namely, in the Creative mixer there is possible to select ONLY one recording input in a time. But we need to record the signal simultaneously from two inputs.
Our question are:
. How can we perform simultaneous, multitrack recording with an Audigy 4 Pro using two stereo inputs (e.g. from Line In and Line In 2 inputs)?
2. Which -from Creative recommended- recording software supports this multritrack recording? Namely, the recordings from the two microphones should be aligned in time as much as possible.
Thank you very much for your help!
Altair

Hi
You need recording software (Cubasis (not sure), Cubase, Sonar, etc.) which supports
ASIO drivers and a 'multichannel' microphone pre-amp/mixer to get microphone(s) connected
'separately' into Audigy Input's.
ASIO driver gives more 'Input sources' to choose from compared to WDM's one stereo/2 mono
channel capability.
.jtp

7.1 with and audigy

Similar Messages

Maybe you are looking for