7.2.1 EXS24 trashes notes when sustain pedal used

I have an M-Audio Keystation Pro 88 connected to a Mac Mini Core Duo through a USB port. A Presonus FirePod is my audio interface.
When I play a Chopin piano piece using the EXS24 Yamaha stereo grand piano, using the sustain pedal as I normally would, after a short while I start hearing pops and clicks and the notes are jumbled.
I can play the same Chopin song while the synthesized piano is used, using the same sustain, and not have any pops and clicks.
If I move the track I just recorded with the synthesized piano over the the EXS24 Yamaha Grand, it plays it just fine.
What am I doing wrong? I just moved from a 400Mhz G4 1GB RAM running Logic 4.8 - and I didn't have any issues playing with sustain using its EXS24.
Actually, the 1st time I played the track back on EXS24 (recorded with synthesized piano), it seemed ok, but no - it is messing up royally. I looked at the 'system performance' audio and disk i/o. The audio bar hits the top - and this is on just a single EXS24 instrument.
I must be doing something wrong - I had multiple EXS24 instruments playing with Logic 4.8 on the G4. Please tell me this isn't true!

I found a setting that greatly helped.
I turned "larger disc buffer" to 'off' (the manual says it defaults to off, but it was set to 'on' without my help) - this greatly lessened audio cpu load with EXS24 for the single stock Yamaha grand that came with Logic Pro.
I am no longer having a problem when just a single EXS24 Yamaha grand is playing or being recorded - I'll have to experiment a bit more to see what happens with multiple tracks.
Is there a tech note somewhere on setting up the Mac & Logic for best performance?

Similar Messages

Why doesn't itunes 11 (Win) show us the length of podcasts? Only new ones d/l thru it show, and even then not - when I can use an old version (10) and it shows me much more info. Am I missing a setting? Thanks!!!

Cannot see or sort podcasts via itunes 11 (Win) like I could in iTunes 10 .. am I missing something? Same goes for playlists. I often take old-time-radio music and/or shows and need them in date-order to make them work (say, ep 1 is one date, ep 2, etc - among dozens of titles). IS there is a setting or did Apple just get rid of it? I have a laptop with iTunes 10 but have tried to get used to the newer versions on my Mom's PC. I don't want to update until I can use it the same way.
Serial radio must be in order. And I have to at least see that in the display to put it in a playlist. Podcasts that show dates from several years ago in ver. 10 no long show anything like it now. Nor, btw, does length of file play. I use it as an over night "podcast radio" and need it to make sense. aIf I need extra steps outside of iTunes okay. Just wish Apple had made it clear and it hasn't.
Thanks!

Once you do get things working... Hardware crashes or virus infections happen, so you should buy software to make a full backup of your hard drive to an external USB hard drive... plus, making step-by-step backups during a new install or major program addition makes it easy to go back a step if something doesn't work
This backup and then restore is, of course, only to the same computer with a new drive (or the same drive as long as you don't mind writing over everything) since doing a restore to a new computer won't work due to Windows and many programs having activation information that is keyed to your hardware (which is why Windows will force you to RE-Activate if you change very much hardware)
The product I use is at http://www.terabyteunlimited.com/image-for-linux.htm
Image runs off of a bootable CD via Linux (the Zip you download includes a program to make the bootable CD) and it reads EVERYTHING on the drive, even the hidden registration information, so everything is restored when needed... and you may restore the image to a brand new drive in case of a crash, and not have to re-install anything
Please note that I own no part of Image, and I don't get a referral fee (that is just a plain web link) but I use the program and it has saved me a LOT of trouble when I had a hard drive die... and I was able to restore everything and not have to re-install or re-activate a single program, from Windows on up

Why do some images open in Photoshop CS5 and others not when I'm using Edit With command in InDesign

Sometimes when I try to edit images from within InDesign Photoshop says it cannot open because of a problem. I noticed that it's not with every image. But I cannot see why. Some are my own images from iPhoto, some are from the morgue files. Anyone?

InDesign

Sustain Pedal not working when recording with software instrument piano

I have an M-Audio sp-2 sustain pedal going into an M-Audio Keystation 88es, which is connected by USB to my mac. When I'm recording and holding down the sustain pedal, the sustain is working properly. However, when I playback what I have recorded, the sustain is gone and it is just the regular piano key notes with no sustain. Does anyone know what the problem here is?

This appears to have been a bug. After restarting the computer the sustain recording is functioning normally now.

TS3899 I am trying to pull up an old email that I received and placed in the trash. When I press "load more messages," the older messages do not pop up. What am I doing wrong?

I am trying to pull up an old email that I received and placed in the trash. When I press "load more messages," no additional trash eMails pop up. What am I doing wrong?

You're not looking in your trash can. And if you've emptied your trash can, the message is gone.
To open your trash, you have inboxes on the top, and accounts below. Tap the mail from the accounts. That's where your trash can is. Tap it. If the mail is not permanently deleted it will be in the trash.

EXS24 Instrument Editor - RIDE SUSTAIN

In the EXS24 Instrument Editor (perhaps elsewhere; I haven't checked), when I record a ride cymbal, it sounds wrong/choppy unless I hold down the sustain pedal on the keyboard. But when I play back the track without the sustain pedal held down, it sounds all divided-up again. (It sounds like a ride cymbal with a mongo gate on it, which totally goes against what a ride cymbal is supposed to be.) I can't find any obvious adjustment in the EXS24 editor - but it seems like such an obvious problem, there's got to be a simple solution.
Another question: In the EXS24 editor, is there a way to assign drum sounds to the black keys while not interrupting the white keys that are assigned to a different drum sound?

In the instrument editor...
Click the "one shot" checkbox for your cymbal. That should let it ring out.
As far as your assignments, assign them to different groups and set the characteristics for that group.
jord

Hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder go it says this file doesn't exist. can some1 plz help?

hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder> go it says this file doesn't exist. can some1 plz help? how can i put all my application through application folder?

Something really odd is going on. In your first screen shot, I noticed that the Applications folder does not have the proper icon displayed in the side bar. Also, in the title bar it lists it as Applications 08-59-29-909.
Not sure where it's picking up that odd name, unless it's because it's still truly within the Trash folder.
Try this. In the Finder > Preferences > General > turn on "Always open folders in a new window". (I have a feeling you have the default setting with this off).
Now, in Finder > Go > move down and open the Applications Folder from there. Now open the folder where you see all your applications that you show in your screen shot, select all, and move them to this true appliactions folder.
This is what you should properly seeing (but with different apps listed):
See how the Applications folder has the icon of the letter A shaped with a pencil, ruler & pen.

Deleted messages (in Trash) not showing "from" & "subject" in list - IMAP

I have searched high and low for this issue but cannot solve it. It is easily reproducible and occurs on two Intel Macs I have, both running Leopard 10.5.5 and Mail 3.5, both w/ IMAP on two separate gmail accounts.
Basically, when I delete a message from the inbox, it goes to the trash, but when I click on the trash icon, the message is there but it is without the "From" and "Subject" fields. It is not 100% of the time, but sometimes more often than not. It is as if Mail can't get the right header info from Gmail. Restarting, restarting mail, etc. doesn't work. Reindexing did get the messages fixed but then new messages just repeat the same problem. Any suggestions?
If I were to double click on one of these messages (bringing it up in its own window) it would show all of the relevant info. However, if I reply to a message from the list view, it doesn't populate the From or Subject field. Its as if it doesn't read the data.
Does anyone have any ideas, or has anyone seen this before?
Thanks,

I'm seeing something similar, yes. Sometimes the headers in the message list of one of my IMAP mailboxes are missing. The header info is displayed correctly in the body panel, just not in the list panel. This makes me think it's not a problem with the IMAP file, but something locally. I've rebuilt the mailbox (1000+ messages). This resolves it but the problem then reappears at some point later.
It only seems to happen in this one mailbox for me.
Sherman

HT1338 Application "FINDER"not responding,Desktop files disappeared & " also "Trash" not working svn after relaunching several times.

Application "FINDER"not responding,Desktop files disappeared & " also "Trash" not working svn after relaunching several times.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the name of the crashed application or process (Finder) in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

I imported photos from an old iPhoto (2001) to photo library and can now see them as thumbnails but not when I click on them. The screen is black cannot see or print either. Is there any way to salvage those old photos? I now use iLife09. OS 10.6

I imported photos from an old iPhoto (2001) to photo library and can now see them only as thumbnails but not when I click on them. The screen is black cannot see or print either. Is there any way to salvage those old photos? I now use iLife09. OS 10.6

Did you import the old iPhoto library into the new one? That's not what you want to do because you will import all of the original, modified and thumbnail files as if they were original files. Lots of duplicates and useless small photos.
Do you have a backup copy of the library that you imported into to? If you do then bring it in and then use iPhoto Library Manager to merge the two libraries into a new, 3rd library.
If you don't then you'll have to try to fix the current one and then cull out the duplicates and small useless photos as follows: make a temporary, duplicate copy of your library and apply the three fixes in order as necessary.
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your HD/User/Home()/ Library/Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your HD/User/Home()/Library /Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #3
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If this doesn't fix the problem you'll have to start over from scratch and create a new library from the files inside the Originals folder of your current library. But first you should cull out the small photos that would be the thumbnails from the 2001 library.
Move the Originals folder to the Desktop, open and do a search for Kind=photo, File size is less than 10 KB. That should find all of the thumbnail files which you can then drag to the Trash. You might have to make that less than 50 KB. Then Import the remaining photos into a new iPhoto library.
OT

Trash not supported? What does that mean...?

Trash not supported? What does that mean...?

When you trash something from within FCPX -- it is completely deleted (from Events or Projects); it is not sent to the system trash - there will be nothing to recover if you make a mistake. If you archived your sources outside of an Event, the originals *will not* be deleted. Do not delete an Event that contains original source media unless you are sure! You will lose it.

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

This gets confusing, you have two Macs with different issues and two pedals with different issues? First let's sort out what's what. So, do the issues come from the pedals or from the Mac software? To find out, simply switch the pedals and note their behaviour. No change: it's the software, change: it's the pedals (imho the most likely scenario).
Second, what kind of pedals are they? Can you name the type of pedal too? The Yamaha what and the Mgear which?
Third, with the 4 fold data problem, are the doubled events simultaneous, or a few ticks apart, or more?
Also, you have no MIDI keyboard? Are the pedals both "standalone"?
I think you have to sort this problem at its' source, which are the pedals. You could, if push really comes to shove, perhaps create some sort of ingeneous/elaborate transformer setup in the environment to filter the extra messages, although with the 4/4 sustain events that may not even be possible. With the "stepped" events you could set up a filter to just block all events with values 20-110 or so.
But much better would be to configure the pedal(s) correctly.

Sustain pedal not working in Mainstage only with Kontakt 4 plugin

I can't get Kontakt 4.0.2 to sustain notes when instantiated in Mainstage.
The sustain pedal works fine for Kontakt in stand alone mode, and for the same patch/channel strip in Logic 9, but not when in a channel strip in MainStage.
I have the pedal mapped properly (same channel, same keyboard selected, same channel selected on Kontakt plugin), since all other patches work fine with said sustain pedal in Mainstage... except for the Kontakt samples.
I have tried a different controller with a different sustain pedal (again, properly mapped and channel synchronized- same channel on controller, pedal and Kontakt interface), and the same thing occurs.
I have gone into the "wrench" area of the Kontakt plugin/instrument options/controller/MIDI controller #64(Sustain Pedal) acts as". I have set this to both Pedal + CC, and Pedal w/o CC and restated Mainstage on both occasions.
Neither setting works. Again, the same settings work fine within Logic (i.e. the sustain works). I have the pedal mapped to the right keyboard and to the same MIDI channel in Kontakt, and I can see it respond on the Mainstage interface; in fact, I can play the patch fine; it just doesn't sustain!
An interesting thing is that when I press the pedal, I can see a MIDI message on Mainstage but not in Kontakt.
Have you come across this issue before? Any ideas on what's going on and/or fixes?
Thanks.
This is the NI reply:
David Das
Moderator
Join Date: Apr 2006
Posts: 3,179
You shouldn't have to assign it in Kontakt -- it just works. I would delete that.
A key indicator is that when you press the pedal, the MIDI message does not appear in Kontakt. That tells me your problem is in MainStage -- for some reason MainStage is intercepting that MIDI data. Therefore, the problem's not inside Kontakt's edit mode. It's somewhere in MainStage.
Sorry I can't be of more help but at least that narrows it down.
www.daviddas.com
My reply:
By the way, if you want to instantiate a Kontakt 4 patch within Mainstage, you have to create a keyboard surface in Layout mode, then assign it and map it to the keyboard you want to play that channel strip with in edit mode. If you don't map a sustain pedal object, Mainstage doesn't receive its message; therefore I am confused when you write: "You shouldn't have to assign it in Kontakt -- it just works. I would delete that."
The keyboard is mapped correctly, since I can play the Kontakt patch fine. Both wheel controllers and the sustain pedal are not getting midi data into Kontakt. As I said, everything works fine in Logic with the same set-up; so I agree, it has to be something I am missing within Mainstage...I just don't know what it is!
Has no one else had this issue on this forum?

Personally I don't think that's a solution and may not change a thing. Logic probably recognized the Akai and tried to use a stock Controller Assignment.
It's easy enough to try this without deleting the file I mentioned.
With Logic running, go to the far left Logic Pro menu, go the Preferences> entry down near the bottom is Control Surfaces. You can Bypass, Rebuild or check what is assigned there.
Believe me... this is not time and trouble... had someone more knowledgeable than me about this particular problem answered you, you would've been on your way.

Sustain pedal not working with my MIDI setup

So, I'm using a Yamaha P-140 hooked up with my Macbook Pro using a Midi-USD cable. I'm mostly using it for Logic Pro X and Sibelius, and it works just fine. However when I use the sustain pedal, it's playing an E3 note and it's messing up all the sound adding a lot of reverb.
Now, this isn't a problem when I'm using the piano as it is. It's also not a problem with either Logic or Sibelius, cause when I'm testing it with the "Sound and MIDI Setup" app on Mac, the sustain pedal is recognized as one of the "hammers" on the keyboard.
I have no idea as how to fix this problem, and it's really annoying having to play super legato when I'm recording.
Thanks in advance.
Note: The keyboard have an "AUX Pedal" input and a "Sustain pedal" input.
USB MIDI Cable specs:
(As written on the package)
- Built-in driver
- USB powered and Class Complaint for true plug & play. Just connect to a computer USB socket for automatic installation of the driver.
- 1 in + 1 out MIDI interface; 16 MIDI input channels & 16 MIDI output channels
- LED's indicate power on, MIDI in signal and MIDI out signal.
- Supports Windows XP, Vista and Mac OS X operating systems
Aditional info:
Now, I've seen the event-recording in Logic for when I use the pedal, and it's picking up 2 different signals. The first one is a "Controller" (as it say under "status") with the info "Sustain", the next 2 have the status "Note" each one triggering an E3.
I looked it up and the pedal is a Yamaha FC3 half damper sustain pedal. I'm not an expert when it come to pedals, but I believe a half damper is a pedal with multiple trigger points? Giving you different amounts of sustain depending on how much you're "pressing it".
(Position 2 1 1 19 = pedal release)

Try deleting Logic's preferences... sounds like a control surface issue.
Delete the Logic 10 preferences file AND the shared control surfaces file.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro User Manual for details on how to do this.
If you are having trouble with a control surface in Logic Pro.
then delete the com.apple.logic.pro.cs file from the preferences folder.
Note: Delete both files, they will be rebuilt the next time Logic runs.

Sustain pedal plays notes in logic express 9

HI
I am using a Yamaha Arius piano that has 3 pedals. I have the piano plugged in via midi to usb connection. Everytime i push down the sustain pedal in Logic express it plays a note. When i look to see what it comes up as it says E3 and then depending on the pressure i place on the pedal, the number changes...
Ive tried using transformers in the environment but this did not fix the issue...
I have checked all of the connections and everything seems to be in working order when playing the piano by itself.
Any thoughts?
Thanks so much

Hi, assign a new name to your new bouce, like "project1.aiff" instead that "project.aiff",
Then rename if you want to call it as the past bounce. cheers

7.2.1 EXS24 trashes notes when sustain pedal used

Similar Messages

Maybe you are looking for