7.5.1 - Errors from Media Server when adding or changing cameras

I am getting a couple of different errors when trying to add or change cameras that are associated to one of my media servers.
I have added screenshots of the errors that I have found.
Any help would be appreciated.....
Steve

Hi Steve,
The initial error message looks like VSOM is attempting to provision 65GB of estimated storage prior to starting a new archive, and that there isn't a VSMS instance with sufficient storage for the request. Is there?
The camera change screenshot I'm not 100% on, but my gut tells me the camera you are trying to swap in may not be at an appropriate firmware level for VSM 7.5.1. Check the release notes for VSM 7.5.1 and ensure the camera you are adding is at the minimum FW required.
The server health / NIC usage message is the most unexpected one in my opinion. Is this VSMS instance physical or virtual? What speed is the NIC negotiated at? If its negotiated at 1000MBps as it's supposed to be, it would imply that you're ingress traffic is near 930 MBps? That is monsterously excessive if that's the case.
Can you provide any additional detail?
Cheers!

Similar Messages

Email Alert/Notification from OSX Server when client status changes?

Hi,
I'm looking at either OSX Server or ARD to manage a network of 'client' mac minis.
One requirement is that the system should alert - by email or other form - when a client's status changes (such as Offline, Sleep, Network Down, etc).
Does OSX Server offer that function?
Thank you for your help.
LMB1980

Something like Dejal Simon might work for you. I don't know of any way for a Mac to detect whether the monitor is turned off or not, though.

It tells me that there's an error on the server when i enter my password. what can i do?

it tells me that there's an error on the server when i enter my password. what can i do???

This is not an issue with Firefox, your message actually confirms this by the error you listed. "There was an error on the server" Firefox is only an internet browser basically, the connection to the internet & such local configuration is outside external from Firefox, the server is on the host side of the connection. It sounds like you have a bad connection between the server & your computer which Firefox has nothing to do with, rather it is your local network. I would actually check out Windows 7 VPN support, you need to setup a virtual private network VPN which is basically a secure connection stable enough to support the bandwidth required to facilitate the meeting.
This is why you are also having the problem with Internet Explorer as you need to correctly configure a VPN connection via windows if your connection supports it.

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

ok sorry everyone but i solved it myself but the solution is so nuts i've posted it here to help others who have the same problem.
to setup a comcast imap account on your iphone:
go to mail, contacts, etc in settings
under accts, select add account
select "other"
new screen, choose "add mail account"
now on the new acct screen you must enter your name, email address and password for your GMAIL acct ! (yes i said your gmail acct !, or some other acct with a NON comcast address).
hit next
then the acct verifies
when verified a screen will open with all the acct settings for this acct AND @ the top of the screen are the 2 buttons > imap or POP
select imap and THEN CHANGE ALL THE ACCOUNT information to the comcast account !
then hit next and the account will take a couple minutes to verify but it will verify and now you have a comcast imap acct set up on your iphone. The problem must be that when the iphone sends the initial verify acct info to comcast (if you enter that information first) the comcast server is simply not setup yet to signal the iphone that there is an imap option.

Internal error - access to IT_ADR2_L when adding E1BPADTEL/SMTP segments (i

When Syndicating Customer Master Data from MDM to ECC (using an iDOC), I receive the following error....
Internal error - access to IT_ADR2_L
when adding data in E1BPADTEL and E1BPADSMTP segments (in E1ADRMAS).
Has anyone received this error?
Thanks!!
MMF

Dear Harry
I think there are any permission issue better to talk basis team, because i has work in my side.

Error in Kpro server when checking in originals from NW Portal

Hi Experts,
I am not able to check in originals in my NetWeaver Portal.
When I try to save I get the follwoing error message:
- Error in Kpro server
But if I try in to check in the same original in the PLM system through SAP GUI it works just fine.
Any thoughts about what I can do?
Thanks in advance,
Mikael

Hi Mikahel,
I have tried changing the whitelist and now I am able to check-in document to a content server storage category but not able to display it..
Could you please tell waht additional setting you have done with data carrier?
We have maintained PC and Default front end..
Regards,
Aby

Communication between Lync - Mediant . 488 evt from mediant site when SBC Remote Early Media RTP parameter is set to Delayed

Hi,
I have a problem with Early Media functionality between Lync and Mediant 1000 E-SBC. If SBC Remote Early Media RTP parameter is set to Delayed (on IP Profile Settings level) i cannot establish connection. After receiving 183 Session progress (from Lync site)
call is released with 488 event (488 is sent from mediant site). Before "Not applicable here" in logs i can see:
6d:9h:46m:35s (      lgr_flow)(18219     ) #MediaResourcesConnector::AllocateMediaResources
(lgr_media_connector)(18220     ) MediaResourcesConnector:CalculateResourcesForAppExtensions Leading:DSP Opposite:NONE MediationLevel:NONE
(lgr_media_service)(18221     ) ServicesMngr: Allocate Media channel. current active: 0 and max is: 0
6d:9h:46m:35s (lgr_media_service)(18222     ) !! [ERROR] ServicesMngr: Cannot allocate more Media channel. current active: 0 and max is: 0
6d:9h:46m:35s (lgr_media_service)(18261     ) (#292) ChannelResource Deallocated.
6d:9h:46m:35s (lgr_media_service)(18262     ) (#293) ChannelResource Deallocated.
I need this because if im using SBC Remote Early Media RTP = Immidiately i cannot hear ringtone. Could someone give me any clues what is wrong in config?
I enclosed detailed logs:
Log is Activated 6d:9h:46m:35s (       lgr_sbc)(18057     ) (#51) SBCRoutesIterator Allocated.
(       lgr_sbc)(18058     ) Classification Succeeded - Source IP Group #2.
(       lgr_sbc)(18059     ) CallAdmission::AddDialog: Type INVITE Direction In IP group 2: 1 SRD 2: 1 SRD ovflw:1 used unres:1
(      lgr_flow)(18060     ) (#51)SBCRoutesIterator::Change State From: InitialRouting To : AlternativeRouting
(       lgr_sbc)(18061     ) CallAdmission::AddDialog: Type INVITE Direction Out IP group 1: 1 SRD 1: 1 SRD ovflw:1 used unres:2
(      lgr_flow)(18062     ) (#51)SBCRoutesIterator::Next route found: Route by: IPGroup , IP Group ID: 1, Live:1
(       lgr_sbc)(18063     ) Routing Succeeded -IP2IPRouting Rule #2.
(      lgr_flow)(18064     ) ---- Incoming SIP Message from switch:5060 to SIPInterface #2 UdpTransportObject[#2] ----
6d:9h:46m:35s INVITE sip:1234@Mediant;user=phone SIP/2.0
Allow: INVITE, ACK, CANCEL, BYE, PRACK, NOTIFY, REFER, SUBSCRIBE, OPTIONS, UPDATE, INFO
Supported: replaces,timer,path,100rel
User-Agent: OmniPCX Enterprise R10.1.1 j2.603.33.a
Session-Expires: 1800;refresher=uac
Min-SE: 900
P-Asserted-Identity: "TPSA 12" <sip:221111111@switch;user=phone>
Content-Type: application/sdp
To: <sip:1234@Mediant;user=phone>
From: "TPSA 12" <sip:221111111@switch;user=phone>;tag=434636a077aeb3418ef3d5c0887debbd
Contact: <sip:221111111@switch;transport=UDP>
Call-ID: 5050e7eb34568795c049d14a6b088172@switch
CSeq: 1290334631 INVITE
Via: SIP/2.0/UDP switch;branch=z9hG4bK668ced008893ef177292c6f0f662ca02
Max-Forwards: 70
Content-Length: 265
v=0
o=OXE 1415263596 1415263596 IN IP4 switch
s=abs
c=IN IP4 172.16.20.32
t=0 0
m=audio 32156 RTP/AVP 8 4 97
a=sendrecv
a=rtpmap:8 PCMA/8000
a=ptime:20
a=maxptime:30
a=rtpmap:4 G723/8000
a=ptime:30
a=maxptime:30
a=rtpmap:97 telephone-event/8000
(     sip_stack)(18066     ) New SIPMessage created - #57
(     sip_stack)(18067     ) New SIPSBCCallLeg created - #1695
6d:9h:46m:35s (     sip_stack)(18068     ) New AcSIPCall created - #1922
(     sip_stack)(18069     ) AcTransactionUser::AddMessageToQueue: Queueing message
6d:9h:46m:35s (     sip_stack)(18102     ) SIPCall(#1922) changes state from Idle to Invited
6d:9h:46m:35s (     sip_stack)(18164     ) SIPCall(#1921) changes state from Idle to Inviting
(     sip_stack)(18165     ) SIPSessionTimer<TU#1921>::FillSTRequestData - Session-Timer mode: TRANSPARENT
(      lgr_flow)(18166     ) ---- Outgoing SIP Message to Lync2:5068 from SIPInterface #1 TcpTransportObject[#648] ----
6d:9h:46m:35s (      lgr_flow)(18178     ) ---- Incoming SIP Message from Lync2:5068 to SIPInterface #1 TcpTransportObject[#648] ----
SIP/2.0 183 Session Progress
FROM: "TPSA 12"<sip:221111111@switch;user=phone>;tag=1c1656521459
TO: <sip:1234@Mediant;user=phone>;tag=499c98c8cd;epid=DE8F26F104
CSEQ: 1 INVITE
CALL-ID: 1656462877611201494635@Mediant
VIA: SIP/2.0/TCP Mediant:5068;branch=z9hG4bKac1657277504;alias
CONTACT: <sip:lyfe02.grupa.lukas:5068;transport=Tcp;maddr=Lync2>
CONTENT-LENGTH: 281
CONTENT-TYPE: application/sdp
ALLOW: CANCEL
ALLOW: BYE
ALLOW: UPDATE
ALLOW: PRACK
REQUIRE: 100rel
SERVER: RTCC/5.0.0.0 MediationServer
Rseq: 1
v=0
o=- 89 1 IN IP4 Lync2
s=session
c=IN IP4 Lync2
b=CT:1000
t=0 0
m=audio 52882 RTP/AVP 8 97
c=IN IP4 Lync2
a=rtcp:52883
a=label:Audio
a=sendrecv
a=rtpmap:8 PCMA/8000
a=rtpmap:97 telephone-event/8000
a=fmtp:97 0-16
m=audio 0 RTP/SAVP 8 4 97
(     sip_stack)(18180     ) New SIPMessage created - #55
(      lgr_flow)(18181     ) |       |(SIPTU#1921)183 State:Proceeding(1656462877611201494635@Mediant)
6d:9h:46m:35s (   lgr_stk_ses)(18182     ) |       |       |       #1694:SIP_ALERT_EV(1656462877611201494635@Mediant)
(     sip_stack)(18183     ) SDPBody::New - id = 126
(     sip_stack)(18184     ) SDPBodyMedia::New - id = 541
(     sip_stack)(18185     ) SDPBodyMedia::New - id = 540
(     sip_stack)(18186     ) <BaseSIP SDPSESSION #1694> UpdateChosenMediaByCN - CN as Remote -1
(     sip_stack)(18187     ) SDPBodyMedia::New - id = 539
(     sip_stack)(18188     ) SDPBodyMedia::New - id = 538
(   lgr_stk_ses)(18189     ) SBCOfferAnswerMngr(#1694) changes state from SIP_MEDIA_OFFERING to SIP_MEDIA_COMPLETED
(   lgr_stk_ses)(18190     ) <SESSION #1694> SendToCall - event: MEDIA_NEGOTIATION_COMPLETED_EV m_Call#1852
(      lgr_flow)(18191     ) |       |       (#1852)SBCCall <- (#1694)SIPSBCCallLeg: MEDIA_NEGOTIATION_COMPLETED_EV
(      lgr_flow)(18192     ) |       (#59)SBCCallPlacementFeature <- (#1852)SBCCall: MEDIA_NEGOTIATION_COMPLETED_EV
(      lgr_flow)(18193     ) |       (#1853)SBCParticipantEndPoint <- (#59)SBCCallPlacementFeature: MEDIA_NEGOTIATION_COMPLETED_EV
6d:9h:46m:35s (      lgr_flow)(18219     ) #MediaResourcesConnector::AllocateMediaResources
(lgr_media_connector)(18220     ) MediaResourcesConnector:CalculateResourcesForAppExtensions Leading:DSP Opposite:NONE MediationLevel:NONE
(lgr_media_service)(18221     ) ServicesMngr: Allocate Media channel. current active: 0 and max is: 0
6d:9h:46m:35s (lgr_media_service)(18222     ) !! [ERROR] ServicesMngr: Cannot allocate more Media channel. current active: 0 and max is: 0
6d:9h:46m:35s (lgr_media_service)(18261     ) (#292) ChannelResource Deallocated.
6d:9h:46m:35s (lgr_media_service)(18262     ) (#293) ChannelResource Deallocated.
6d:9h:46m:35s (      lgr_flow)(18263     ) |       |       (#1853)SBCCall <- (#1695)SIPSBCCallLeg: RELEASE_EV
(      lgr_flow)(18264     ) |       |       (#1853) SBCCall changing states from:AlertingState to:DisconnectingState
(      lgr_flow)(18265     ) |       (#1852)SBCParticipantEndPoint <- (#1853)SBCCall: RELEASE_EV
(      lgr_flow)(18266     ) (#1852) SBCParticipantEndPoint changing states from:InitiatedState to:ReleaseingState
(      lgr_flow)(18267     ) (#1035)SBCController <- (#1852)SBCParticipantEndPoint: RELEASE_EV
(      lgr_flow)(18268     ) |       |       (#1035) SBCController changing states from:EstablishingState to:DisconnectingState
(      lgr_flow)(18269     ) |       (#1853)SBCParticipantEndPoint <- (#1035)SBCController: RELEASE_EV
(      lgr_flow)(18270     ) (#1853) SBCParticipantEndPoint changing states from:InitiatedState to:ReleaseingState
(      lgr_flow)(18271     ) |       (#59)SBCCallPlacementFeature <- (#1853)SBCParticipantEndPoint: RELEASE_EV
(      lgr_flow)(18272     ) (#59) SBCCallPlacementFeature changing states from: Initiated to: Releasing
6d:9h:46m:35s (      lgr_flow)(18273     ) |       |       (#1852)SBCCall <- (#59)SBCCallPlacementFeature: RELEASE_EV
(      lgr_flow)(18274     ) |       |       (#1852) SBCCall changing states from:AlertingState to:DisconnectingState
(      lgr_flow)(18275     ) |       |       |       (#1694)SIPSBCCallLeg <- (#1852)SBCCall: RELEASE_EV
(     sip_stack)(18276     ) New SIPMessage created - #52
(      lgr_flow)(18277     ) |       |(SIPTU#1921)DISCONNECT_REQ State:Proceeding(1656462877611201494635@Mediant)
(     sip_stack)(18278     ) New SIPMessage created - #49
(      lgr_flow)(18279     ) ---- Outgoing SIP Message to Lync2:5068 from SIPInterface #1 TcpTransportObject[#648] ----
CANCEL sip:1234@Mediant;user=phone SIP/2.0
Via: SIP/2.0/TCP Mediant:5068;branch=z9hG4bKac1657277504;alias
Max-Forwards: 70
From: "TPSA 12" <sip:221111111@switch;user=phone>;tag=1c1656521459
To: <sip:1234@Mediant;user=phone>;epid=DE8F26F104
Call-ID: 1656462877611201494635@Mediant
CSeq: 1 CANCEL
User-Agent: E-SBC/v.6.60A.260.002
Reason: SIP ;cause=488 ;text="488 Not Acceptable Here"
Content-Length: 0
(     sip_stack)(18281     ) Resource SIPMessage deleted - #49
6d:9h:46m:35s (     sip_stack)(18354     ) New SIPMessage created - #42
(     sip_stack)(18355     ) Resource SIPMessage deleted - #42
(      lgr_flow)(18356     ) |       | TransactionUserMngr::ReturnTransactionUser - #1921
(     sip_stack)(18357     ) SIPCall(#1921) changes state from Disconnected to Idle
6d:9h:46m:40s (     sip_stack)(18358     ) New SIPMessage created - #47
(     sip_stack)(18359     ) Resource SIPMessage deleted - #47
(      lgr_flow)(18360     ) |       | TransactionUserMngr::ReturnTransactionUser - #1922
(     sip_stack)(18361     ) SIPCall(#1922) changes state from Disconnected to Idle

Hi,
On Mediant 1000 E-SBC SBC tab, when set Remote Early Media RTP Behavior to
Delayed, but also check if the following configuration set correctly:
SBC Media Security Behavior: SRTP
PRACK Mode: Optional
Remote Update Support: Supported Only After Connect
Remote Re-INVITE: Supported Only With SDP
Remote Delayed Offer Support: Not Supported
Remote REFER Behavior: Handle Locally
Remote 3xx Behavior: Handle Locally
Enforce MKI Size: Enforce
You can refer this
link
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Error on Production Server when php service is called.

The web application runs fine on my development machine but on the production server it gives me the following error and no responce when a phpservice is called.
error:
Send failed
Channel.Connect.Failed error NetConnection.Call.BadVersion: : url:
'http://ipaddress/Project/public/gateway.php'
Network Monitor:
Development Machine:
Windows 7
MySQL 5.5.16
Zend Framework 1.10
Production Machine:
Ubuntu 11.10
MySQL 5.1.58
Zend Framework 1.11
I followed the following steps to deploy the application on production server;
1. created identical database with same credentials on the production server
2. confirmed that my php service works on the server by manually navigating to the php file and printing the data retrieved on the page
3. modified the paths in amf_config.ini to reflect production server
[zend]
webroot = "/var/www"
zend_path ="/usr/local/zend/share/ZendFramework/library"
library ="/var/www/Project/library"
services ="/var/www/Project/services"
[zendamf]
amf.production = true
amf.directories[]=Project/services
4. initialized the class by adding
// Initialization customization goes here
_serviceControl.endpoint = "http://ipaddress/Project/public/gateway.php";
in the .as file for the php service
I have also found from my zend server logs that when my php service is called its throws the following error:
PHP Notice: Undefined index: HTTPS in /usr/local/zend/share/ZendFramework/library/Zend/Amf/Response/Http.php on line 59
I doubt that there is anything wrong in the deployment process but please do let me know if you could think of something i might have missed.
The other thing im wondering is the php notice if it were to be caused due to different Zend Framework versions!
Kindly advice

EGJ Steens has post a fix at http://forums.adobe.com/message/4097998#4097998#4097998/Using Flash Builder
Zend framework 1.11 added an extra function in the Http.php file (which was mentioned in the post) and was fixed as follows
protected function isIeOverSsl()
        $_SERVER['HTTPS'] = 'off'; //Adding this line fixed the issue
        $ssl = $_SERVER['HTTPS'];
        if (!$ssl || ($ssl == 'off')) {
            // IIS reports "off", whereas other browsers simply don't populate
            return false;
        $ua = $_SERVER['HTTP_USER_AGENT'];
        if (!preg_match('/; MSIE \d+\.\d+;/', $ua)) {
            // Not MicroSoft Internet Explorer
            return false;
        return true;
My concern is if i wish to secure my application with ssl using HTTPS will this prevent me from doing so.
Any Pointers Anybody?

Error starting ORMI server, when run oc4j.cmd -start

hello oracle guru,
i just finish installing the Oracle Business Intelligence Publisher Standalone 10.1.3.4 in Window XP Home Edition SP3 platform..
but when i want to start the BI Publisher, by running the oc4j, i get this errors
Starting OC4J from E:\OraInstall\OraBIP\oc4j_bi\j2ee\home ...
2010-10-13 17:33:17.453 ERROR ServerFile[PersistentMap,/E:/OraInstall/OraBIP/oc4j_bi/j2ee/home/persistence/jms.state]:persistence file could not be locked. Resolve the sharing violation by ending the process currently holding the file lock or by using a different persistence directory for one or both processes.
10/10/13 17:33:17 *** (SEVERE) ServerFile[PersistentMap,/E:/OraInstall/OraBIP/oc4j_bi/j2ee/home/persistence/jms.state]: persistence file could not be locked. Resolve the sharing violation by ending the process currently holding the file lock or by using a different persistence directory for one or both processes.
2010-10-13 17:33:17.484 ERROR Failed to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConfig[file:/E:/OraInstall/OraBIP/oc4j_bi/j2ee/home/config/jms.xml]
10/10/13 17:33:17 *** (SEVERE) Failed to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConfig[file:/E:/OraInstall/OraBIP/oc4j_bi/j2ee/home/config/jms.xml]
2010-10-13 17:33:17.484 ERROR J2EE OJR-00011 Exception starting JMS server: Failed to set the internal configuration of the OC4J JMS Server with:XMLJMSServerConfig[file:/E:/OraInstall/OraBIP/oc4j_bi/j2ee/home/config/jms.xml]
2010-10-13 17:33:17.593 ERROR J2EE RMI-00002 Error starting ORMI server TOSHIBA port 23,791:Address already in use: JVM_Bind
2010-10-13 17:33:17.609 ERROR java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:359)
at java.net.ServerSocket.bind(ServerSocket.java:319)
at java.net.ServerSocket.<init>(ServerSocket.java:185)
at com.evermind.server.rmi.RMIServer.createServerSocket(RMIServer.java:433)
at com.evermind.server.rmi.RMIServer.createNonSecureSocket(RMIServer.java:347)
at com.evermind.server.rmi.RMIServer.setConfig(RMIServer.java:210)
at com.evermind.server.ApplicationServer.initializeRMI(ApplicationServer.java:2378)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:966)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
at java.lang.Thread.run(Thread.java:595)
10/10/13 17:33:17 Error starting ORMI server TOSHIBA port 23,791: Address already in use: JVM_Bind
10/10/13 17:33:17 Shutting down OC4J...
Can somebody who have been facing this error before this can guide me on how to solve the problem?

http://kr.forums.oracle.com/forums/thread.jspa?threadID=640696
Please check this link... it helped me in Solaris environment..it works for me.
All the best..
Thanks
Deependra

Phone hog links give me error message "an error occuredon the server when processing the URL

When ever I click on the links sent from phone hog.com to earn free minutes I get the following error message. "An error occurred on the server when processing the URL. Please contact the system administrator" I have made several contacts with phone hog help and they claim it is my settings on my computer. However I contacted my internet provider TDS telecom and they indicated that this is a phone hog issue. I do not have any other problems with any other links I click on with this type of error message.

Hello msFit,
it's well known, that in all these cases you describe I'm not a friend of a detailed troubleshooting. To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable.

Streaming .FLV files from Media Server 4.5 using PHDS

I would like to stream .FLV files from adobe media server 4.5.
Requirements state that the files should be considered secret, so I decided that PHDS sounds like the
right thing.
I was able to stream an .FLV by placing it in the webroot/vod folder using an url like http://myserver/vod/test.flv
However the developer manual states that a way to enable PHDS at the server level is to uncomment the two lines like this.
<IfModule jithttp_module>
<Location /hds-vod>
    HttpStreamingJITPEnabled true
    HttpStreamingContentPath "../webroot/vod"
    JitFmsDirPath ".."
    Options -Indexes FollowSymLinks
# Uncomment the following directives to enable encryption
# for this location.
   EncryptionScope server
   ProtectionScheme phds
</Location>
</IfModule>
However I am not able to stream my FLV using url like http://myserver/hds-vod/test.flv
Question : Am I supposed to use the hds-vod in the URL or is /vod doing the same ?
                  Is the approach correct, or should the files go into an applications\myapplication\media folder ?
                  I will need some server side actionscript to validate access to the stream, is that possible without a dedicated application ?

Hi,
When you use the vod location directive you're basically using Progressive download so your URL is as : http://myserver/vod/test.flv
However, when you use the location directive hds-vod, it is HTTP Streaming, where the fragments are created on the fly. For this your URL needs to be as : http://myserver/hds-vod/test.f4v.f4m
Please note .flv files are not supported for HTTP streaming (via hds-vod location directive). You cannot use PHDS with .flv files.
Thanks,
Apurva

How do I obtain a time from a server, when I have no process running on it?

I have a program that is running on many machines.
They all write files to a shared DIR on a server.
I need to obtain a time that is constant, as the only constistant thinh I know they can all see is the server, I'd like them to beable to get the time from the server.
This way I can keep my locks (so only 1 pc can write at any one time) consistant
How do I do this?
(I have no process on the server)
I'm looking for a call that'll tell me the time on a computer, in millis or somthing else. (I can then use Calendar.setTimeInMillis(long millis) )
But I don't know where to look....

This way I can keep my locks (so only 1 pc canwrite at any one time) consistant
I doubt having something depending on times being
synchronized is the right approach for this. You
should instead actually lock things, such as by using
a Mutex or actually locking files/records/bytes.it is unwise to actually lock a file as if there is an error, the file stays locked,. So you still need a time to work out how long it has been locked incase there has been a problem and it has gone 'stale'.
If 'stale' the locked ness should be able to be overridden.
But it is poor to use client time, as they all may be different.
I'd like to use the time on the NFS, or whatever has the shared DIR. It looks from what you're saying is that I can't find this out in Java.
:o(

How do I set up my e-mail so it doesn't delete it from my server when I delete it on my iPad

When on my iPad and I read my e-mail and then delete it, it also deletes it on my AT&T server. How do I set it up so that it leaves it on the server.
I read my e-mail from several different devices and do not want it deleted from the server.

Then AT&T email must be IMAP email and if it is, anything that you do on one device syncs across all devices with IMAP. If you delete the message on your iPad, that will delete it from the server, your computer, your iPhone or any smartphone that you have .... It deletes it from all devices. If you read an email on one device, it will appear as being read on all devices. If you move the email to a Saved folder on one device, that moves it to the Saved folder on all devices.
There is nothing that you can do about that. It is the way that IMAP email works.

Streaming video and music from Media Server to N80

Hi
Has anyone any idea (if it's at all possible) how to stream content (video or music) from Home Media Server on the PC to the phone? I can see how to play content on the PC on another uPnP device using the phone as a remote control and I copy files between the PC and phone, but really I just want to play MP3s from the PC on the phone without copying them across first.
Thanks in advance.
BenMessage Edited by karim on 29-May-2006
10:33 AM

Hello,
In Home Media Server 3.4, you are not prompted to create a user account and password through the product. User accounts became available in September 2006 with Home Media Server 4.0.
To give Home Media Server 4.0 a whirl, download it for free at:
http://www.simplecenter.com/nokia/
In addition, the SimpleCenter Knowledge Base and Forum is in the process of being updated. And with luck, the new version will roll out by the end of November 2006. One major change is that the new version will no longer require a username and password to browse the technical articles and forum threads.
Thanks,
Katherine

E4200v2 video streaming lag from media server

When I try to stream a movie through the media server or through my computer to my xbox 360 the video will play fine for a couple minutes then it well get choppy and then the sound will not sync with the picture. I have the latest firmware and reset it also. Tried switching channels and changed mtu didn't do anything. tried steaming on 2 different xboxs and its the same thing.

You can try the following combination of settings:-
A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
          1] Open the software and go to the option which says "Router Settings"
          2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
         3] Then click on Security tab disable SPI Firewall Protection, uncheck Filter Anonymous Internet Requests...
         4] Then click on QoS under Application and Gaming tab and disable WMM
B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the user name field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.
Then check the connectivity status…

7.5.1 - Errors from Media Server when adding or changing cameras

Similar Messages

Maybe you are looking for