7.5.2 fails to update on one of two Air port extremes

I have two Airport Extremes and one updated the firmware fine but the other has the airport utility just sitting there searching for the latest firmware version and never updates. THe one that updated fine is the extension unit and the one that will not udpate is the main unit.
Anyone else have this problem or have a solution?

Updated 4 devices with no issues, but I'm not sure how that information would apply to the 1 device you have that is having issues.
If the AirPort Extreme won't take the update...and you want to apply it...my suggestion at this point is to perform a Factory Default Reset on the AirPort Extreme to clear out all the old (and possibly corrupted settings) and start over again. There is no assurance that this will help...it's only a suggestion that has worked for me in the past with an update issue.
http://support.apple.com/kb/HT3728?viewlocale=en_US

Similar Messages

Why can Firefox only be updated in ONE of TWO administrator passwords in MAC OS? It SHOULD work from either.

Every time Firefox has an available update, I get a message that indicates that it can't be installed because I have "insufficient privileges." There are two userIDs on the computer (a MAC running MAC OS 10.4.11), and both userIDs have "administrator" privileges, which means updates and other changes should be permitted from either userID. I find I have to log into the other userID and update Firefox there, and then it shows the update on my userID. Is there a way to change settings to enable updating from either userID, or at least to change which userID updates are permitted from, since my userID is the primary one used? Thanks.

Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
Trash the current Firefox application to do a clean reinstall.
Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

DPM 2012 R2 fails to back up one of two disks on file server

Good day! I've built a new DPM 2012 R2 server and migrated or re-created jobs from my older 2012 SP1
DPM servers as trying to upgrade them was not working out. The DPM R2 server is running great besides this one issue. The problem is with a file and print server at a remote office. Since it has around 750 GB of user data on it I chose to do manual replica
creation on the data disk, (E:) but created the C:\ drive replica normally, over the WAN. The manual replica creation was successful, and the initial consistency check and recovery point creation worked as expected, however, since then it will not create another
RP or run a CC on the E:\ drive. Recovery points on the C:\ drive are being created properly. When I try to run a CC I get this error: "An unexpected error occurred while the job was running. (ID 104 Details: Access is denied (0x80070005))" I've
tried to drop protection on the two directories of the E:\ drive (retaining data) and re-create, but that didn't help. I've even done a recovery from the initial RP to verify that it was created properly, and that worked as well.

Open command prompt on target file and print server, change directory to
C:\Program Files\Microsoft Data Protection Manager\DPM\Temp> and run below command
C:\Program Files\Microsoft Data Protection Manager\DPM\Temp>find /i "[0x80070005]"
DPMRACur*.errlog >C:\Errors.txt
Paste the output here from C:\Errors.txt

One or two LAG port-channel for 5508 v7.4 in HA setup?

Hi group
I have a question regarding LAG in HA setup; do you configure two port-channel, one for each controller or, only one port-channel for both?
I have a stack of 3 x 3750x, and 2 x 5508 with each two Gigabit uplink in use.
Active controler (5508-1) is connected to stack switch 1 and stack switch 2.
Standby controller (5508-2) is connected to stack switch 2 and stack switch 3.
I cannot find any documentation or guidelines for configurations of LAG in HA setup.
P.S. my question is not how to configure LAG or LACP, it only if you use one port-channel consist of 4 gigabit ports, or you have two with each 2 gigabit port to each controller.
TIA,
Peter

Thanks Stephen for your reply.
The switch doesn’t see which of the two port-channel that is on the active controller right?
If WLC01 is the active one in PO1 and standby is WLC02 in PO2, the MAC of the active controller (WLC01) will be sending on PO1.
When failover to standby, the MAC of WLC02 will be sending on PO2. As I see it, it is same IP address (management IP address of WLC01) but different MAC address – from WLC02.
So why could it not be one Port-channel, both controller will use one and same config when it become active?
TIA
Peter

Firmware Update on Air Port Extreme w/o Password

Hi,
is there the possibility to update the firmware if I have forgotten my password? I don`t want to change my running system but I would like to get the latest update.
Thanks!

No you will need the admin password.
By hard resetting the AirPort Extreme base station (AEBS) you will reset the password to factory default.
Resetting an AirPort Base Station or Time Capsule FAQ

Do the old air port extremes work with the software update downloaded today

I have the new airport express. I have a two year old airport extreme. I downloaded the airport software update today and the internet access is not connecting. I can access the internet on other networks, but not my own. In the airport utilities my airport express lists ,connection good'. The airport extreme, even though it has the green connection dot lit, does not have any verbage giving connection status.

Yeah im 12 and im awsome at all the iPod stuff but not this?!?!?!?!?!! Anyway I have had my iPodTouch since christmas and it was fine loving it up every minute and well today i saw this update.Well my curiosity clicked it and now it has a usb and the iTunes symbol and when i click restore it loads then on my iPod it has the apple and the bar under it loads then about midway it shuts of and has the picture pop back up! Please answer me I will DIE without my music it MY LIFE you dont understand!!! HELP!!!

Master Data loading got failed: error "Update mode R is not supported by th

Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
Nirav

Hi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM

HT1923 iTunes on my Windows Vista has failed to update over several weeks. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting

iTunes on my Windows Vista has failed to update over several weeks. Audio will not play out. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting. Any clues??

Hey petanque1,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

Satellite P855-108 - PC health Monitor fails to update - Windows 8.1 update

Hello,
today updated to win 8.1 from a one year old windows 8, everything went fine
Then I followed Toshiba recommendations for updating the tools but despite doing exactly as explained the flash cards(and the functions buttons) are not functioning, they worked perfectly in win 8!
_The only utility that fails to update is PC health monitor,_ the version installed is 1.9.04.6402 and the one from support site for win 8.1 is 1.9.09.6400, when trying to install it fails with error message "not support"
When trying to open the installed health monitor there is also an error message "can`t get the bios type".
This is strange and every other utility recognizes the latest bios version 6.70 an the laptop`s details an serial
I tried all I could think about, installed flash card support tool from win 8, enabling and disabling in the bios, even installed VAP for win 8 but no change
Any help would be highly appreciated
Latest system driver and other tools are installed
Thanks in advance

Sorry for taking space on the forum,
_In case anyone is facing the same problem I managed to find a solution by my self,_
*it was caused by the old version of PC health monitor,*
uninstalled, updated to latest version
Now Function key utility and everything works as supposed, _the latest Health monitor also works fine_

Software update server- 10.4.8 fails to update

Hello all,
I have a software update server and perticular updates fail when run on client computers. I have just been stuck disabling them in Server Admin. What is the easiest way to fix this. Some updates in peticular are 10.4.8 and different logic updates. Could these pkgs have become corrupted and need to be re-added to the /usr/share/swupd/html/ directory?
thank you!

Hi, I was wondering if you had made any progress on this problem. I have spent some time tonight looking at the update_list.txt file that the Apple Knowledge Base article shows you how to generate. I know for sure that the 10.4.8Combo updater is one that fails to install. I have noticed something that i cannot explain and would be interested to see if you see the same. Below is an excerpt from the .txt file. I noticed that some updates do not follow the folder numbering structure that the others do. The 10.4.8 Combo updater, along with a few others, begin with zzz. Any ideas on this?
<string>/usr/share/swupd/html/061-1807/h4tBSmzXQ6sWTF9k73hYKz5hZcnJQNv7Rp/HLDSFW Updater.tar</string>
<string>/usr/share/swupd/html/zzz061-2660/JbKdyCgpmF9jB3vYyk8hzqKf8wKkrxd8Yx/Ma cOSXUpdCombo10.4.8Intel.tar</string>
<string>/usr/share/swupd/html/061-1750/jpc7Rxgx28fpTTF3TPS3wBvy6QqG58fnxH/LiveT ypeUpdate1.2.tar</string>
<string>/usr/share/swupd/html/061-1686/hQf6cZrbBpnXggcsmMRmfXGnLbdBv32bSf/iPhot oUpdate201.tar</string>
<string>/usr/share/swupd/html/061-2161/4rftGHVRPKtYqDZdPLscXB2q7VWhwcxySc/iTune sProducer.tar</string>
<string>/usr/share/swupd/html/061-2503/XT7KVqv64gCjpqYd8Xr699YTzCM4Zdc87j/Macmi niSMCUpdate.tar</string>
<string>/usr/share/swupd/html/061-2748/rBd6Lj2RWDkvXXBmmzP6X6yFt9vpnk2cvf/iMovi e_603.tar</string>
<string>/usr/share/swupd/html/061-1693/GJmbmjdvKYpGvSspNH3tKRJPrKww3XGHq2/Garag eBand_11.tar</string>
<string>/usr/share/swupd/html/061-1726/tPFZMFh24CVHFyfg2bsvYxLPDPXsCV96tP/DVDSt udioPro3.0.2Update.tar</string>
<string>/usr/share/swupd/html/061-2510/tXrX8ZRspRydnLRT95Yn9kxqHXS3pTwg2n/Pages 2.0.1v2.tar</string>
<string>/usr/share/swupd/html/061-1788/LYfpcCc42jr589V2zms8kgnkndRyYtdvRJ/Qmast erAppsUpdate1.2.1.tar</string>
<string>/usr/share/swupd/html/061-1702/h6zX8TBNG6QDVPwBQhxCDHPZnZFjCjztqy/iDVD5 01Update.tar</string>
<string>/usr/share/swupd/html/061-1733/pt4fL3fP8RwmQyhZm9NKTxSwkPH2NJGBBJ/Compr essorUpdate1.2.1.tar</string>
<string>/usr/share/swupd/html/061-2700/nHDMySq3cmj3SrNp8QbjYPRNM4fN9t2wBF/iPhot o_605.tar</string>
<string>/usr/share/swupd/html/zzz061-2651/hdvQ9XJg4jCKKPZhwWFNmWgzQ7kHL4J3hD/Ma cOSXUpdCombo10.4.8PPC.tar</string>
<string>/usr/share/swupd/html/061-1859/Qdkh5w7LRbrXxStc7qvkWb5HxLhFxZYNDJ/Qmast er2.0.1.tar</string>

Adobe Application Manager failed during update and fils to reinstall

G'day All,
I put this up in November last year in a Creative Suites discussion thread (sse blow the line), and though the original post has been viewed more than 280 times, I have received no responses. I simply cannot update my CS6 software. I have just reposted the information below there, and figured I should try here, also.
Details : CS6 design and web premium, HP Pavilion quad-core i7, now running Windows 8.1
Essentially my application manager failed while it was upgrading itself as I was attempting to fix a problem with Acrobat/the Adobe PDF printer constantly failing after printing only one PDF. The updater/application manager then simply disappeared from my system altogether.
At the time of the original problem I had downloaded ApplicationManager7.0_all.exe; if I attempt to run it I get a pop-up window 2/3rds of the way through the installation and the following message 'Installer failed to initialise. Please download Adobe Support Advisor to detect the problem'.
Adobe Support Advisor no longer exists.
So I tried the latest version - ApplicationManager8.0_all.exe. This installed just fine, but seems to be entirely oriented around CC applications, so I haven't tried it on my CS6 programs. Should I just uninstall it? I rather wonder why it says 'This patch will install the Adobe Application Manager that is included with Adobe Creative Cloud, Adobe Creative Suite 6, Adobe Creative Suite 5.5 products' if, in fact, it's just for CC products.
So, any suggestions on what to do now? I'd really like to be able to update my applications via a Manager that will actually function.
regards,
Bill
G'day All,
(CS6 design and web premium, Windows 8. HP Pavilion quad-core i7)
Frankly, this is ridiculous.
Having been driven nuts by the 'Acrobat manager is not activated' message which persisted in popping up if I made any attempts beyond one to create a PDF - that is, I could print one, and then no others without a reboot, nor having done so could I read any PDFs - I searched online and got a discouraging, tangled mess of suggestions, including the fairly obvious one of checking that all programs had been updated by the Application Manager.
'Ah,' I thought, 'maybe if I ensure everything's up-to-date this thing where Acrobat failing to start because it thinks it's not 'activated' means I can neither read nor print PDFs will be miraculously fixed without my having to install magical patches or deregister and reregister the entire suite in order to appease a program I don't even use or want!'
Poor naive fool that I am!
So I tried to run the Application Manager.
It momentarily flashed a message claiming (I believe - it was only there for a second) another instance of itself was running, then proceeded to run an update process for the application itself, then threw up an administration window seeking to allow the program to modify the system about 2/3rds of the way through, and then announced via a little window with one of those horrible little red 'fail' symbols that the application manager had failed to install.
It sure had!
That's it - I now have no Application Manager to attempt to manage updates through! No shortcut - that disappeared too! Nothing in the hideous Windows 8 start menu! No search will reveal it! It's simply gone. Yes, I've rebooted.
All I can find online suggests installing a new instance of the Application Manager, which is, of course, the CC version, and I'm not a subscriber. OK, maybe that will work, but, quite frankly, with two strikes against Adobe already I'm going to ask if anyody actually knows whether this approach, or any other, is likely to solve the problem.
regards,
Bill

Thanks for the reply, Jeff. Sure am! But that's not the main problem.
However, it appears the main problem has been fixed - via the installation of AAM 8 - a mere 9 months later! CS6 updates - woohoo!
This didn't fix the Adobe PDF printing thing - in fact, I just lost everything I'd previously typed in response to you testing this hadn't been fixed by AAM 8's updates (it hasn't!).
However, during the 9 month fallow period I've discovered that if I keep process explorer open and kill the splwow64.exe/acrotray.exe process tree after every single PDF printing I don't get bizarre messages telling me the Adobe PDF printer isn't 'activated' or have my system go into a tizzy and need rebooting. So it still doesn't really work, but I do have a work-around...
regards,
Bill

Imported Photoshop File Fails to Update

I have imported a layered file from Photoshop CS3 into Flash
CS3. The original import works fine but when I change the PSD file
in Photoshop and try to update it in Flash it doesn't get updated.
To do the update I right-click on the bitmap layer in the Library
and select Update. A dialog is displayed showing the name of the
layer and at the bottom of the dialog it says "1 of 1 items need to
be updated." But after I click the Update button, it says "0 of 1
items updated" and a question mark appears next to the Label in the
dialog. And the bitmap is not updated.
I have tried this same procedure with a simple single-layer
bitmap and that works so I'm guessing it must have something to do
with the structure of my Photoshop file. That file has a folder
nested within another folder. The inner folder contains several
layers, one of which is the layer in question.
At one point, I thought it might have something to do with
the fact that the layer contains a SmartObject but I tried the same
procedure on another layer in the same folder which contains just a
simple bitmap. That layer fails to update also.
Is this a bug?
David Salahi

Yup, saw all that, but wasn't sure what format those elements were (PNG or JPEG). I assumed JPEG, due to the compression settings, but wasn't sure if the compression was separate from the file format.
But, how is transparency information being stored in a JPEG format? I assumed some other 'under the hood' things were being done to achieve that, and worried that it would not necessarily be supported by all browsers, etc.

Failed to updated my MacBook Pro

I just purchased a new 15 inches Macbook Pro 320GB with 7200rpm 4GB memory last Tuesday which I ordered online.
I just discovered I have sixteen items to update such as security Update 2010 – 001, Java for Mac OS 10.6 Update 1, iMove update, iTunes update…etc. but they all failed to updated.
My Internet is working as it was downloading for twenty-three minutes but this what comes up
“Some of the selected updates couldn’t be saved
The update could not be expanded and verified. It may have been corrupted or tempered with during downloading. The Update will be downloaded and checked again the next time that Software update runs”
When I click “OK” button – this comes up “An error occurred during download”
I had done this three times even with one to install a time, it still failed or any of update software didn’t updated at all. I am keeping trying...
Any advise on this please.

Thanks for moved my question to correct forum.
My new Macbook Pro is as follows:
Model Identifier: MacBookPro5,3
Version 10.6.0 (216)
Processor Name: Intel Core 2 Duo
Processor Speed: 2.66 GHz
Memory: 4 GB
just discovered I have sixteen items to update such as security Update 2010 – 001, Java for Mac OS 10.6 Update 1, iMove update, iTunes update…etc. but they all failed to updated.
My Internet is working as it was downloading for twenty-three minutes but this what comes up
“Some of the selected updates couldn’t be saved
The update could not be expanded and verified. It may have been corrupted or tempered with during downloading. The Update will be downloaded and checked again the next time that Software update runs”
When I click “OK” button – this comes up “An error occurred during download”
I had done this three times even with one to install a time, it still failed or any of update software didn’t updated at all. I am keeping trying...

PRS-T1 stuck in infinite reboot loop after failed firmware update

Hi,
I tried to update the firmware, but failed when updating to version 1.0.07.05070. Tried to 2 times. The first time it failed I simply tried again. The second time, it took a lot longer to reach the failed to update message, but it did cause the ereader to reboot.
Now, it's stuck in an infinite reboot loop on the "Opening book" page. The progress bar on that page stays completely empty, lasts for about 30 seconds, and reboots again. This will go one until the battery is dead or indefinitely if plugged in.
I have tried pressing the Home + Menu buttons, but they seem to have no effect.
Please advise if there is anything I can try to revive it?
Thanks in advanced.
David
Solved!
Go to Solution.

Kiroken,
Here is what I have observed:
- After a hard boot (reset + power button during 3+ seconds), if I don't do anything, it will reboot every ~30seconds.
- If I press and hold the Home and Menu buttons, no effect. The same as if I didn't press anything.
- If I press the Forward + Back buttons (2 & 4), it does not reboot after 30 seconds. Instead, the orange light on the power button blink every ~2-3 seconds.
- Any other key combinations that I have tried have no effect.
I have tried with and without several rescue sdcard. No difference. No improvement. In every case, the computer never sees the reader. If plugged into the power outlet, it seems like the battery charges alright. It does not appear to charge if plugged into USB port.
That's all I know. If I can't fix it, I might be forced to turn it into a coaster or maybe a cutting board for the kitchen.
David

Bricked x120e -- failed BIOS update

Hi,
I was trying to update the BIOS of my x120e (0596-2RU) from within Windows 7, it got stuck (no progress for more than half an hour), now the notebook is bricked (the screen won't turn on; there's no beeps, just the fan is turned on).
I believe I followed all the instructions (battery fully charged etc.), but the Customer Support here in Ireland says failed BIOS updates are not covered by warranty (contrary to what some people on these forums say).
What are my options now?
Thanks a lot!
Solved!
Go to Solution.

Hi rufus82,
I came across this thread that has answers for questions similar to the one you raised. Hope its of help.
http://forum.lenovo.com/t5/W-Series-ThinkPad-Laptops/Bios-Update-Fail-Under-Warranty-but-No-Support/...
As suggested by andyP, do contact support one more time.
regards
lak_sg
WW Social Media
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

7.5.2 fails to update on one of two Air port extremes

Similar Messages

Maybe you are looking for