7.5 and 5.5 BIOS for K7N2 DELTA released

Just enter this link:
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=436

Extended test ended up going back to 193x11.5 (2222)
Crashed in looping of demo 3Dmark2001SE after 45 mins.
Noticed my Nostromo game pad not being reconized , lights stayed on(not good)USB
Backed up fsb a couple notches to stable again. All is good
passing all extended test.
gained 1 fsb from 192 to 193. I'll still take it.
keeping low Volts
CPU 1.7
Dram 2.6
Aggressive memory timings 2-2-2-6
Sis Sandra still showing above stock 3200 400fsb speeds in benches
Memory Bandwidth 2913
2733
Arithmetic 8125
Temps:
System 33C
CPU 36C
Power 35C ( all after benching)

Similar Messages

Bios for K7n2 delta 2 LSR (2800+ Mobile Barton Recognizing)

Hi, i need the BIOS for the Bios for MSI K7n2 delta 2 LSR Motherboard, because i have a Mobile Barton 2800+ CPU with FSB 266 and it isn't recognized correct, i would like to set the Multiplier to 16, the highest setting is 13 - but at 13 my system didnt boot anymore. I tried the B72 Bios, but it didn't help. Thanks

What's that? You already asked for that in another thread (https://forum-en.msi.com/index.php?topic=123557.msg932826#msg932826). Please don't open various threads for the same issue.
I already said in the other thread you can't set 16 manually. Set it to auto.

New Modded BIOS for K7N2 Delta ILSR

MSI K7N2 Delta ILSR Modded BIOS based on Official v. 7.80 BIOS
download here:

Description: Access through interface which is on insecure interfaces list detected. Request aborted.
Interface/Client IP address:
Date: Wed, 18 May 2005 13:11:17 GMT
Doesn't work for me
By the way did u put the bios to vork with 1.3 vcore like the braziliantech one that does't exist anymore ?
EDIT: Thanks it's working now

FOR K7N2 DELTA-L USERS: Mouse Hang At Win Startup? Check It Out!!

!!!FOR K7N2 DELTA-L USERS!!!!!
I had this same problem but i think i found solution. STEP 1 plug mouse to ps2 keyboard port and vice versa, if that will not help ... STEP 2 in bios set BOOT UP NUM LOCK LED to off and GATE A20 OPTION to normal that should help!!! it REALY solved my problem!!

Making a copy to Good Articles...

My KingMax SuperRam can't run Dual Channel for K7N2-delta

My KingMax SuperRam can't run Dual Channel for K7N2-delta
why??

How many sticks do you have?
Please post complete systems specs in your signature.

3.3 bios for k7n2 ILSR Delta

Hi I am looking for the 3.3 bios and I cant seem to find it anywhere, anyone know of any links that I can use to find it?

The bios numbers for the K7N2 Delta ILSR start at 7.1 to 7.6 so don't know what mean by 3.3.
http://www.msicomputer.com/support/bios_result.asp

IDE Harddisk and DVD ROM cannot detected by BIOS in K7N2 Delta Series

Does anyone can help...
I have problem with my system, From now on i cannot use my computer because it cannot started the windows. When i checked to the bios there is no detected Harddisk in IDE 0 ( i have 2 harddisk installed), only 1 detected in IDE 1 - only CDRW drive ( for CDRW drive and DVD ROM drive). I checked the power cable to the both Disk drive and Optical drive there is no problem. If i change the master and slave pin the problem stil happen.
I don't know what to do Please help me.
my system :
MSI K7N2 Delta Series
AMD Athlon XP 1800+
Windows XP Pro SP2

Quote from: ici on 08-February-06, 01:06:02
When problems occur go back to basics. You stated D: is unreadable but C: partition is readable (if I understood right).
As sharp said use only one stick of ram. Remove any additional PCI cards installed other than Video. Do not plug in anything but the hard drive set to master.
Check to see if system will detect.
If at this point it properly detects your drive, check for a boot to windows. If it boots then remove the hard drive and try just the CD-ROM for detection purposes. If this detects try them together again, if they fail to detect you most likely have a power supply issue. And yes, PSU issues can crop up very suddenly.
If this fails take the Hard Drive to a friend and have them test it along with the CD-RW/ROM drives. If they work there and your issue still persists when you have eliminated all other possible points of failure you probably have a bad motherboard.
Sorry i forgot to tell that the harddisk that the D: cannot unreadable is i check it on other system as a slave.
Okay i will try your suggestion.
Thanks for your comment

Jumper Settings for K7N2 Delta LISR and Athlon 3200 FSB400

Hello Everyone,
(I think I sent this to Raven By E-Mail but I'm not sure, I'm still new to this)
Having problems understanding jumper settings.
I cheched out the forum and the motherboard users guide to see which way the jumpers are set for my Board K7N2 LISR + Athlon 3200+ 400FSB.
In the user guide it say's:-
FSB Mode Jumper: J10
This jumper allows you to set the CPU FSB mode, (It then shows two diagrams of Jumper 10) - first with pins 1 and 2 jumpered "user mode default 133Mhz" and the secound shows pins 2 and 3 jumpered "safe mode 100Mhz".
What has settings 133Mhz or 100Mhz got to do with a 400 FSB??????
CPU FSB Frequency Jumper: J11
This jumper is used to specify the CPU FSB frequency. (again it shows two Diagrams) first: Leave the jumper short connected if a 133/166Mhz FSB is installed.
Secound:If the CPU supports 100Mhz FSB, leave the jumper open connected.
To use a 200Mhz FSB CPU, set the jumper short connected and enter BIOS setup Utility to adjust the CPU FSB Clock Frequency.
Again what has 133/166Mhz or 100Mhz got to do with a 400 FSB???????
For my K7N2 Delta LISR and Athlon Barton 3200+ 400 FSB, what Would I set J10 to:- (Jumpered Pins 1 and 2,= 133Mhz) or (Jumpered 2 and 3,= 100Mhz).
Also what would I set J11 to:- (Jumper pins Open = 100Mhz) or (Jumper short 133/166Mhz). Hope someone can help!!!!!!!!!
It would be nice if the User's Guide had a (If .... Then..... in it)
If CPU = Athlon 2800+ 333 FSB, Then J10 is jumpered pins 1 and 2,
If CPU = Athlon.... etc etc.... or even a couple of examples
Sorry this is so long, but I just need to tell someone, Thanks.

1 insafe mode it will boot at 100 fsb regardless of what you set in the bios
in user it will boot by what it sees the cpu as or what you set it to in the bios
just leave it in user
if you o/c and it will not boot shut down put it in safe
then lower the o/c once it boots
again shut down and put it back in user
2 just leave it shorted
only alter it if you used a 100 fsb cpu

Via 4 in 1 Drivers and Bios for KT6 Delta

Below is my current setup. My machine either freezes or shuts down when I try to install the Via 4 in 1. Any suggestions?
Also, what Bios should I load? I've heard of problems with the most recent release.
What is everyone else using and what do you recommend?
Thanks in advance.

Are you sure you have installed the right VIA drivers (they're are different driver types for different system setups)? Sounds like you have put on the wrong VIA drivers.
The VIA drivers that you should use can be found on the MSI website:
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=474
Always look under the driver section and you will find all the suitable and current driver updates for VIA chipsets for your motherboard.
Hope that helps, Richard.

AGP Setup For k7n2 delta ilsr

I have a k7n2 delta ilsr mb, in display properties on desk top setting tab then advanced button then GeForce tab under adapter information is Bus and memory. To the right of Bus it reads AGP (PCI mode) shouldn't that read AGP (8X), how can I change this. Ron.

Hi,
No, leave it at 64 or 128.
Go here for an explanation:
http://www.rojakpot.com/default.aspx?location=7&var1=18
Then - Click on: "Free Access To the BIOS Optimization Guide" near the bottom of the page - then click on "AGP Aperture Size"
Axel

Need help with jumper settings for k7n2 delta ilsr

I have a k7n2 delta ilsr and I'm using a AMD 2800+ barton 333 fsb. I'm not sure what the jumper settins are for this cpu. The users guide only shows 133/166 and 200, can anyone help me with the jumper settings.
Thanks, Ron.

Hi,
As your processor is 333FSB - the jumper should be set to 166FSB as should the BIOS. As your RAM CPU combination runs at 2x166=333 or thereabouts.
Basically, as a general rule, if you halve the FSB speed of your processor you'll get the setting for both BIOS and Jumper. 200FSB=100, 266FSB=133, 333FSB=166 etc. etc.
Axel

Temperature reading for K7N2 Delta ILSR

I have a 2500+ Barton (333 FSB) to work with K7N2 Delta ILSR and 2x256 MB Samsung DDRAM(400 FSB).I use MBM to read my CPU temperatures.Usually 45-47 C idle and 54-58 C under full load.I overclock CPU to 400 FSB and I get LOWER TEMPERATURES!!!!!
I use 1:1 bios setting for CPU and DRAM speeds either 333 or 400 FSB.
How can this by possible?

I use Speedfan which seems to follow the temp in the bios. I've heard that MBM is also accurate. As far as your temps going down on a OC that is very odd indeed.

New bioses for K7N2, Delta & K7N2G released-Updated

MSI has posted new bioses for the K7N2, Delta and K7N2G series mainly adding Sempron support for these boards as follows:-
K7N2G-ILSR bios version 2.0
K7N2 Delta-ILSR & L bios versions 7.8 & 5.8
K7N2 & K7N2G-L bios version 4.1
K7N2GM-L bios version 1.6
MS-6729 bios version 5.4

Quote
Originally posted by Raven
a athlon xp is rated up to 85 celsis and if its from April 2004 it should be quite correct.
carefully touch the heatsink to check if its warm or not
also what is your other temps ?
what program do you use to check temp ?
pc alert4 is known to show wrong from time to time.
i use speedfan and it works god form e.
http://www.almico.com
but the higher the temp the sooner it will fail.
55-60 is what most people recommend as maximum temp under load.
I know its rated up to 85C but won't it start being unstable around 75C?
I use SpeedFan, MBM5 to check temps. Not sure about the case temp but the socket temp is like 28-35C I believe.

Another help request for K7N2-delta

I was trying to overclock my memory and when my system rebooted after saving my settings in the bios, I just get a black screen. On the D-bracket, the top two are red and hangs there, which, according to the manual, means that either my processor is damaged or not installed properly.
I tried rebooting in safe mode by changing my J10 jumper and clearing the cmos but to no avail. Could I have damaged my CPU just by changing a setting?
Specs:
CPU: AMD Athlon Barton 2500+
Motherboard: K7N2 Delta-ILSR
Video card: Saphire Radeon 9600 Pro 256 mb AGP
RAM: Corsair Value Select, PC2700, 256mb, 512 mb, and 1 gb of RAM.
Hard drive 1 & 2: Seagate, 120gb, ATA100
Hard drive 3: Western Digital, 500gb, ATA100
Windows XP SP2
Powersupply: Antec TruePower, 430w (3.3v/28a, 5v/36a, 12v/20a)

Quote from: Stu on 18-February-08, 02:21:22
Guys, the Insert key reset was for the K7N2-Delta2 series, which didn't have the safemode FSB jumper, it does not apply to the K7N2 Delta
You're asking for trouble by a) using cheap value-branded RAM, and b) mixing sticks of different sizes
Also you always get best results by running memory clock at same speed as CPU FSB clock.
Take out all the sticks of RAM and have just one installed, then see if it will start up again
I read a review of how well this memory overclocks, so I thought I'd give it a shot. Also, the value-brand for Corsair is rated just under their XMS series; it's solid as far as I can tell.
Anywho, I've always had the 256mb one in the slot ever since the incident anyways. Thanks for the warning, I never knew mixing different sizes had negative effects.
Quote from: Maxwell Smart on 18-February-08, 02:18:35
I own this board... it's not the insert key, but rather the delete key... so yes, as soon as your pc boots up, hit the delete key repeatedly (or hold it down) and then it will let you go into the BIOS.
I'll try that once I get home. Thanks for the info!
Quote from: HenryW on 18-February-08, 03:01:23
"I was trying to overclock my memory..."
There is a miss-print in your manual for the CPU D-LED, I had the same in my K7N2G-ILSR manual.
So it's stuck at the hard drive or at the system power on? I'm assuming the latter since my hard drive shouldn't be having any problems.
Yea, I don't know what I was thinking when I decided to try this. This is what I get for it, I guess.

FLASH BIOS MSI K7N2 Delta-ILSR ????????

I am trying to flash the BIOS of my K7N2 Delta-ILSR board. I follwed all the instructions from the MSI Web but I can't get it going. I booted from Win ME & Win98 but could not get into C: drive. So I used Command Prompt from Window to get into the C: drive and follwed the Flash Bios Procedures. I keep getting the message: AwdFlash No Support WinNT/2000/XP OS
I got problem with the temp after I updated the BIOS. I wanted to flash it back to the old Bios. Please help me out
Thank you
My system:
WinXP Pro
MSI K7N2 Delta-ILSR
AMD 2500+
1 GB DR3200
Seagate 160 SATA

http://www.msi.com.tw/html/support/bios/note/ntfs.htm

7.5 and 5.5 BIOS for K7N2 DELTA released

Similar Messages

Maybe you are looking for