7.5 Hierarchy Master Data Load
Hi experts,
I am trying to load material masterdata with a hierarchy.
When I was loading my members I applied an attribute filter.
It loaded OK and loaded the hierarchy nodes ok.
Then as I went to load the hierarchy it gave me an error saying that "Hierarchy nodes include dimension members that do not exist"
When I checked through the log I could see that the "missing" members where all the ones that I had filtered out with the attribute filter.
But it seems the hierarchy load needs them?
Is there a way to apply the same filter in the hierarchy load? Or any other way around this?
Or can an attribute filter only be used if you are not loading hierarchies?
Thanks
Hi Joergen,
Thanks so much for your quick reply.
My problem is not that my nodes don't load. They do actually come through fine in my first master data load.
But then when I load the hierarchy BPC complains that the node I want to now create as parents has members that don't exist in BPC. These are basemembers, not nodes.
For example:
BW:
Parent A:
Child A
Child B
Child C
BPC
I only load Child A and Child B because Child C does not meet the attribute filter
When I then load Parent A I get an error that Child C is missing?
Regardless I tried your method and it didn't work for me?
-First I loaded my members only with the attribute filter - no problem
-but then I put in a rubbish filter like you said and ticked to load the hierarchy nodes. When I choose the AND filter nothing is being loaded at all. when I choose the OR filter it loads everything (incl the members that I excluded in the first load)?
Did I understand that wrong?
Thanks
Sabine
Similar Messages
-
Master Data load does not extract Hierarchy nodes in BPC Dimension ACCOUNT
Hi Experts,
I am performing master data load through standard DM package with Filter selection as:
1. Chart of Accounts
2. Hieararchy selection has 4 hierarchy names
3. Selected Import Text nodes
4. Selected Set Filters by Attribute OR Hierarchies
I have run this DM package for a set of data and selections a week ago and it worked fine.
However when i run it now, it is giving issues,
It extracts any new GL maintained in the BI system however it does not extract any hierarchy nodes at all! (Have tested this by deleting the hierarchy nodes and tried to run the master data load)
I am running the DM package in Update and have selection as External.
Any sugestions for checks / has anyone encountered this issue earlier?
Regards,
Shweta SalpeHi Guyz,
Thanks.
I found that the issue was with the transformation file where i was maintaining the RATETYPE.
When i removed the mapping of RATETYPE this works fine. (Pulls the nodes of hierarchies)
however now i do not have Ratetype populated in the system.
my rate type mapping is:
RATETYPE=*IF(ID(1:1)=*STR(C) then *STR(TOSKIP);ID(1:1)=*STR(H) then *STR(TOSKIP);ID)
and in conversion file i have TOSKIP *skip
I have to skip the ratetypes for the hierarchy nodes and my hierarchy nodes start with C and H.
So now that i have removed the mapping for RATETYPE can anyone suggest me a correct way to achieve this? (Note the above mapping formula was skipping all of the hierarchy nodes starting with C and H)
Regards,
Shweta Salpe -
Error in Setting lock for Master Data Load
Hi Team,
I encounter the following error while uploading the Masterdata
"Lock NOT set for: Loading master data attributes
Attributes of characteristic 0BPARTNER are locked by terminated change run 465451241"
I Performed the following steps
1) Checked if any active jobs (change run jobs) running in the system. But no jobs running.
2) RSATTR->infoobject list-> no infoobject found
3)Tried after sometime ,but load continue to fail
Could anyone help to solve the problem
thanks
BalaHi Bala,
Check in SM12 if there are any locks exist with the change run number?
First check if there are any Master data loads running related to it?
Check in the Attribute change run screen if there are any change run steps are running?
Once after checking the above if no locks exist and no master data is running then check the below steps
1. Run RSA1 transaction
2. Tools -> Apply Hierarchy/Attibutes Change(or direct transaction RSATTR)... menu option
3. Click at "Monitor and Start terminated Change Runs" button (at the bottom of the screen)
4. Click "Reset Status" button at Run ID 465451241
NOTE: this is not recommended, to unlock the locks better to wait till the locks get relased.
If still the error message persists then we can use a FM in se37 in serious cases which was not recommended by SAP...
Use RSDDS_AGGR_MOD_CLOSE in se37 and execute--->there give ur failed change run no(465451241) beside I_CNSID and execute...
It releases all the locks by that change run....and continue with your further work/jobs...
Regards
KP -
Master Data loading in BPC 7.5 with prefix
Hi Gurus,
I need a help in master loading in BPC 7.5
Currently we are loading GL account with prefix of A and controlling area(COA1)
BI:0000600000
BPC: ACOA10000600000
I have maintained logic in the transformation file as below. Z001 represents the hierarchy Node.
ID=IF(ID(1:4)=STR(Z001) then STR(A)+ID;STR(A)0CO_AREAID)
Now client has came with new requirement as below
BI BPC
GL Acc 0000600000 A_600000
GL Node Z00113 Z001_13
GL Node Z00213 Z002_13
For the above requirement i have maintained the logic in the transformation file as below. when running master data load package i got the error as
Line 755 :Command failed ; end position is out of record index
ID=IF(ID(1:4)=STR(Z001) then STR(Z001_)+ID(5:12);STR(A_)+ID(5:12))
I need your help in modifying the logic in the transformation file for handling the above requirement.
And also for handling two hierarchy Z001 and Z002.
Thanks
MaheshHi,
Your command should like:
ID=*IF(ID(1:4)=*STR(Z001) then *STR(Z001_)+ID(5:6);*STR(A_)+ID(5:10))
Hope this helps. -
Hi all,
I am new to loading master data, i have searched forum still getting more confusion, My requirment like material master
data load i like to know what data source have to use and how to load into target, please guide me step by step.
thank uhello there,
lets first define what you want, e.g. attribute, text or hierarchy, it can be all 3 as well.
if you want attribute for material master data you can use 0MATERIAL_ATTR
for text you can use 0MATERIAL_TEXT and for hierarchy you can use 0MATERIAL_HIER
all material master data goes into infoobject 0MATERIAL. good luck and feedback if you need further assistance. -
How many tables are created in Master data loading ( Including hierchy )
hi ,
Please anybody , can you tell us how many tables are created in Master data loading ( Including hierchy )
thanks
PhaniHi PP,
Depending upon the definition of an infoobject, the tables are created when the objects are activated.
/BI<C OR DIGIT>/<TABLE CODE><INFOOBJECT>
<C or digit>: C = Customer-defined InfoObjects
digit = SAP-defined InfoObjects
<table code>: S = SID table
T = Text table
P = Time-independent master data attributes
Q = Time-dependent master data attributes
M = Union of time-dependent and time-independent master
data attributes
X = SID table for time-independent navigational attributes
Y = SID table for time-dependent navigational attributes
H = Hierarchy table
K = Hierarchy SID table
I = Hierarchy SID structure table
J = Hierarchy interval table
Thnaks...
Shambhu -
Master data loading in BPC NW 7.5
Hi all,
I am trying to load master data from BW into BPC using the packages provided in BPC7.5.
Master data infoobject in Bw is compounded with 3 other objects.2 of them dont have any master data tables.All they have is a text table(T table).
When i run the package i get a warning saying compounded object1 is empty.
i think i am getting the warning because it doesnt have any master data tables(P table,M table and Z table).
In a different case i had a compounded info object but i didnt have any issue because it had master data table to it.This case is diff since no master data tables exists.
Can someone help me on how to approach master data loading in a scenario where compounded objects dont have any master data tables.
Thanks,
Any help is appreciated.
KK.Hi,
The document is for BPC when they didnt have the new process chains to load master data.Now they have 2 new process chains.One to load master data attributes and texts and the other one to load Hierarchy.And these 2 packages support compounded info objects too.
I was able to load profit center attr/texts/hierarchy into BPC although it was compounded to Controlling Area.This wasnt an issue because Controlling Area had master data defined. meaning it had P table and M table created.
But my issue is for this new master data load i am trying to do the compounded info object doesnt have master data tables.And thats causing an issue.It says Master data table for 0Division is empty.
I want to know if there is any workaround in BPC for this issue.
Any help is appreciated.
Thanks,
KK -
Urgent: Master Data Load
Hi All
I have activated some master data info objects but i cant find them in the infosource area to load master data (attrib, text and hierarchies) although in the info object definition the application component is displayed. Can someone tell me the reason behind this?
Thanks in Advance
~Alisedear alise
while activating the infoobject make it 'data flow before and after' this will make sure its application area also been activated.
now coming back to ur query on master data load. once u activate infoobject with 'dataflow before and after', its infosource will also be activated from the content version to active, now in definition of infosource u will find communication structure and datasource assignement (for text, attributes and hierarchy) for the source system. Select them as per ur requirement, make sure field mapping is ok and activate Infosource for text, attribute and hierarchy.
Now u can create the infopackage for these elements (different infopackages for text, attribute and hierarchy) and laod master data to infoobject via PSA so that u can see the data in PSA.
confirm that ur data has been reached to the table properly.
i hope this could resolve ur problem.
kindly assign the points if it helps. -
Master Data loading got failed: error "Update mode R is not supported by th
Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
NiravHi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM -
Dear Experts,
If somebody can help me by the following case, please give me some solution. Iu2019m working in a project BI 7.0 were needed to delete master data for an InfoObject material. The way that I took for this was through tcode u201CS14u201D. After that, I have tried to load again the master data, but the process was broken and the load done to half data.
This it is the error:
Second attempt to write record 'YY99993' to /BIC/PYYYY00006 failed
Message no. RSDMD218
Diagnosis
During the master data update, the master data tables are read to determine which records of the data package that was passed have to be inserted, updated, or modified. Some records are inserted in the master data table by a concurrently running request between reading the tables at the start of package processing and the actual record insertion at the end of package processing.
The master data update tries to overwrite the records inserted by the concurrently running process, but the database record modification returns an unexpected error.
Procedure
u2022 Check if the values of the master data record with the key specified in this message are updated correctly.
u2022 Run the RSRV master data test "Time Overlaps of Load Requests" and enter the current request to analyze which requests are running concurrently and may have affected the master data update process.
u2022 Re-schedule the master data load process to avoid such situations in future.
u2022 Read SAP note 668466 to get more information about master data update scheduling.
Other hand, the SID table in the master data product is empty.
Thanks for you well!
LuisDear Daya,
Thank for your help, but I was applied your suggesting. I sent to OSS with the following details:
We are on BI 7.0 (system ID DXX)
While loading Master Data for infoobject XXXX00001 (main characteristic in our system u2013 like material) we are facing the following error:
Yellow warning u201CSecond attempt to write record u20182.347.263u2019 to BIC/ XXXX00001 was successfulu201D
We are loading the Master data from data source ZD_BW_XXXXXXX (from APO system) through the DTP ZD_BW_XXXXX / XXX130 -> XXXX00001
The Master Data tables (S, P, X) are not updated properly.
The following reparing actions have been taken so far:
1. Delete all related transactional and master data, by checking all relation (tcode SLG1 à RSDMD, MD_DEL)
2. Follow instructions from OSS 632931 (tcode RSRV)
3. Run report RSDMD_CHECKPRG_ALL from tcode SE38 (using both check and repair options).
After deleting all data, the previous tests were ok, but once we load new master data, the same problem appears again, and the report RSDMD_CHECKPRG_ALL gives the following error.
u201CCharacteristic XXXX00001: error fund during this test.u201D
The RSRV check for u201CCompare sizes of P and X and/or Q and Y tables for characteristic XXXX00001u201D is shown below:
Characteristic XXXX00001: Table /BIC/ PXXXX00001, /BIC/ XXXXX00001 are not consistent 351.196 derivation.
It seems that our problem is described in OSS 1143433 (SP13), even if we already are in SP16.
Could somebody please help us, and let us know how to solve the problem?
Thank for all,
Luis -
How to rectify the errors in master data loads & transactional data loads?
hy,
please any one tell me
How to rectify the errors in master data loads & transactional data loads?
thnQ
RaviHi,
Please post specific questions in the forum.
Please explain the error you are getting.
-Vikram -
R/3 Master Data Load Error
Hi Experts
Our master data load from R/3 to BW was failed today.
This is the error message on status Tab of failed request
Diagnosis
No IDocs could be sent to the SAP BW using RFC.
System response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of the SAP BW.
Further analysis:
Check the TRFC log.
You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Removing errors:
If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
I navigated through Environment -> Transact. RFC -> In source system"
In R/3 i got the following error
timeout during allocate / CPIC-CALL: 'ThS
#Timeout during connect
How shall i proceed now.
ThanksHi,
Check the RFC connection between R3 and BW. Use transaction SM59 for the same or take help from the BASIS team.
If that is correct check the EDI partner profiles, if they are active and functioning properly. You can take BASIS help here.
Cheers,
Kedar -
Hi All,
Could any body clearly explain the following options in the Info Package of master data Info Object with full update
Update data
1. PSA and then into Info Obejcts
2 . Only PSA ( Update Subsequently in data targets )
Data source trasfers no duplicate records
Igonore double data records
While I am doing master data load with the 1 and 3 options I am getting same no of records updated in PSA but loadng is getting failured with the 1st option (Caller 01 02 .. 20 Messages ) .and request with 3rd option is success..
Thanks in Advance...
Regards,
NagamaniHi
U r master data might have the Dublicate records
select the PSA
and select the option
Ignore dublicate data records
IF you have the Deblicates
EX
CNO
1010
1020
1010
ITs not alowed the 1010 record
Regards -
How the Master data will be loaded from R/3 to BW?
Just u give detailed answer and if possible navigation. and if any important points are related with it, just u tell me.Hi
Go through these links..........
http://help.sap.com/saphelp_nw04/helpdata/en/58/a4513ce4af0a40e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e92637c2cbf357e10000009b38f936/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c4/b007720ae4c248b945bb16f24bba31/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/help/sdn_nw04/sapdocu/netweaver/webas/630/helpdata/en/fa/9a2096e32f11d1a5370060087a79ea/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a634be07211d2acb80000e829fbfe/content.htm
Re: Master data identification
Master Data Loading Steps?
Master Data Extraction
hope it is helpful..................
assign points...
GTR -
Blank Row in table during Master Data Load
I am having some success with my master data loads, but when I maintain the master data I have noticed that every table has had a blank row inserted.
Does anybody know why and what I should do with the row (i.e. delete it)?This blank row is by default created and you can no way delete it. Though you delete it, a new row with blank values will be appended. This is required for some technical reason while reading the table within ABAP programs.
This is applicable only for SAP tables and may not be required for custom developed ones unless you want to use this in screen programs.
Regards,
Raj
Maybe you are looking for
-
HT201272 How do I sync my ipod Nano with my itunes account
I recently found my old ipod Nano and I want to sync it with my itunes account but I am having trouble.
-
How to Reorganize CSM200 Shared Storage in Solaris 10 x86 Oracle 10gR2
I could use some guidance from those who are more experienced in RAC administration in a Solaris environment with ASM. I have a three-node RAC with Oracle 10gR2 instances on top of Solaris 10 x86 where the shared storage is a Sun CSM200 disk array wh
-
HT4623 how do i upddate my ipod touch 3rd gen?
?
-
QueryNew, Structure or SQL Temp Table?
Hi there, I'm hoping someone can help me. I've developed an app using QueryNew and the queries to the QueryNew are each taking 47ms to run. And since there can be like 1200 queries of that QueryNew (loop iterations- all necessary- long story), the pa
-
What are all the designing steps to make printable puzzles?
The puzzles are usually the difficult task to perform.... While it is in printable form, how can add the designing steps to make it effective? Share your ideas....!