7.5 I-tune new version

When will they fix 7.5 I-tune

if it's ntfs microsofts filesystem then you need a windows machine to recover them

Similar Messages

  • Hi support please help me to sync my ipod and iphone 5 . Since i have installed new itunes version 12 , i am not able to sync to transfer data to my devices through itunes.  I think there is some issue with tunes new version .kindly support ASAP.  Ra

    Hi support please help me to sync my ipod and iphone 5 . Since i have installed new itunes version 12 , i am not able to sync to transfer data to my devices through itunes.
    I think there is some issue with tunes new version .kindly support ASAP.
    Rachna khanna
    [email protected]

    you might need to buy a new cable from the apple store.

  • Due to impossibility to upgrade the i tunes version installated on my computer, i decided to remove it because i had needed to sincronize my new iphone 4s. But when i try to install the i tunes newer version the installation hangs on the collecting produc

    Hi everybody.
    Im still hanged by the same problem i reorted in the message listed below ten days ago.
    Is there anyone can hep me ?
    Due to impossibility to upgrade the i tunes version installated on my computer, i decided to remove it because i had needed to sincronize my new iphone 4s. But when i try to install the i tunes newer version the installation hangs on the collecting product information and only after a long wait i receive the following message :
    An error occurred during the installation of assembly ‘Microsoft.VC80.CRT.type=”win32”,version=”8.0.50727.6195”,publicKey Token=”1fc8b3b9a1e18e3b”,processorArchitecture=”x86”.Please refer to Help and Support for more information. HRESULT: 0x800736B3

    What version of Windows are you using? This is not a problem with iTunes. It may have to do with an issue of the compatibility of a newer version of iTunes with an older Windows system/older hardware.
    What do you want to synchronize? If you were previously using iCloud you should be able to restore most of your oringinal content onto your new phone via was was last synched with the iCloud on your previous phone/device.

  • Hi Due to impossibility to upgrade the i tunes version installated i removed the old version but now when i try to install the newer  version 10.5.3  the set up  hangs on co: collecting information... Please help

    Hi
    Due to impossibility to upgrade the i tunes version installated on my computer, i decided to remove it because i had needed to sincronize my new iphone 4s. But when i try to install the i tunes newer version the installation hangs on the collecting product information and  only after a long wait  i receive the following message :
    An error occurred during the installation of assembly ‘Microsoft.VC80.CRT.type=”win32”,version=”8.0.50727.6195”,publicKey Token=”1fc8b3b9a1e18e3b”,processorArchitecture=”x86”.Please refer to Help and Support for more information. HRESULT: 0x800736B3
    Heeeeeeeeeeeeeeelp

    What version of Windows are you using? This is not a problem with iTunes. It may have to do with an issue of the compatibility of a newer version of iTunes with an older Windows system/older hardware.
    What do you want to synchronize? If you were previously using iCloud you should be able to restore most of your oringinal content onto your new phone via was was last synched with the iCloud on your previous phone/device.

  • I had backed up my I-tunes files to an external hard drive but after my computer crashed when I try to reload from the hard drive the message comes up saying I-tunes library cannot be read because it was created by a newer version. Help please!

    I had backed up my I-tunes files to an external hard drive but after my computer crashed and I restored it when I try to reload from the hard drive the message comes up ""I-tunes files cannot be read because it was created by a newer version of I-tunes". Help Please

    Upgrade the version of itunes on the new computer
    Itunes.com for free download.
    Peace

  • At 60 and totally confused w/version . Not  clue with how to use it and how to change it. My question - If a new version of i-tunes can be offered why not the older version as being a choice? Too simple or just impossible to do? I hate to drop i-tunes.

    At 60 years of age and totally challenged by todays technology I find it impossible to understand i-tunes Version 11. Don' ask me to try to try go back to a earlier version ( as much as I would like to). I have read some of the advice given, as well as intended as it is, I don't understand the process. I don't want to drop i-tune but I will. I am sure my library is not as large as many others who use it but it is just as important to me. This really saddens me.
    I do have two question if some one can help me. First, someone mentioned that if I go to previous restore point this might correct it. Yes or no? Secondly, if Apple can offer us a new version to download why can't they offer an older version to download. Too simple or impossible to do.

    You can still drag and drop a song into a Playlist, in the same manner as before. Simply use the left-click of your mouse to select-and-hold the song (left-click-and-hold, don't release the click) and drag it to and then drop it (release the click) into the Playlist you want. (You cannot drop it into a Smart Playlist, you can only drop it into a Regular Playlist.)
    ... and here's a screenshot dragging the song "Lazy Orbit" into the Regular Playlist "Sat 4th June 2011". A small + symbol also appears in the drag, but it doesn't show up on screenshots. If the move is forbidden, a red slash through a red circle appears instead of the + symbol.
    As for the Albums thing; in the Column Browser, right-click anywhere in the Column Browser header (see my screenshots in my previous post) and a menu appears. Deselect Albums on that menu to remove Albums from the upper Columns:
    ... and for the columns underneath (with the songs list etc.), right-click on that header bar and once again, deselect Albums from the menu that appears. The Albums column will then be removed from the lower columns list.
    ed294 wrote:
    You would think with all the complaints they are getting they would want us, the buyers, to be satisfied with there product.
    Well, my advice to you is: do not think about what you think iTunes cannot do, instead, think about what you want to achieve - and then work out how to achieve it.

  • Problems installing and starting on Windows 7 64bit. error message - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes.

    Hi I'm having problems installing and starting itunes program on Windows 7 64bit. After install the following error message is flagged - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes. Would really appreciate any pointers!

    Never mind sorted it out lol. Somebody did a system restore of a week or so. I had done the update during that time and it was lost. Just redownloaded itunes from the internet and its working fine now.

  • The file i tunes library.itl cannot be read because it was created by a newer version of itunes

    The file i tunes library.itl cannot be read because it was created by a newer version of itunes?
    I got this message after trying to open up itunes . I recently did a system restore to  my computer to a restore point i made a couple days ago
    My itunes library was huge and very organized have I lost it all because I restored my pc to 7 days ago????? SERIOUSLY I GOOGLED THIS and I HAVE READ SO MANY DIFFERENT ANSWERS ITS ANNOYING!!!!  
    I have windows vista
    CAN SOMEBODY JUST GIVE ME A SOLUTION TO HOW TO GET MY ITUNES(PLAYLISTS AND ALL) BACK!!!!!
    dont give me a way that deletes all my playlists because i had way over 1,000 playlists divided into Folders it was super organized!

    It sounds as though the system restore that you've done has reverted your computer back to a previous version of iTunes. In iTunes look at Help/About iTunes and as the scroll runs, you will see the iTunes version number.
    The latest version of iTunes (on the day of writing) is 10.5.1.42, so if your iTunes is lower than that, it's possible that's what the problem is. (This assumes that you were previously using 10.5.1.42, which is a reasonable assumption.)
    So make sure you have the latest version. I don't know why you did the system restore on your computer, but despite what some people may have you believe, iTunes is very stable and unlikely to be causing any issues on your computer that need to be undone with a system restore.

  • I cannot get i-tunes anymore. I tried the i-download. Still no help. I get an error message that reads  The file "itunes Library itl" cannot be read because it was created by a newer version of iTunes. What can I do?   tunes down load

    I cannot get i-tunes. I tried the download, but no help. I get an error message The file "iTunes library itl" cannot be read because it was created by a newer version of iTunes. Any suggestions?

    If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
    Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
    Not sure if the following site/link will tell the method...
    •Apple - Support - iTunes - install & update:
    http://www.apple.com/support/itunes/install/
    •Troubleshooting iTunes installation on Mac OS X:
    http://support.apple.com/kb/HT2311
    Good luck & happy computing!
    ps: i see you resolved this issue. it's magic!

  • I Dowlaoded new version of I tunes and I have lost everything. How do i get it all back?

    i Dowlaoded new version of I tunes and I have lost everything. How do i get it back?

    See Empty/corrupt library after upgrade/crash.
    tt2

  • I just downloaded i tunes to my new computer.  I had an account on the old one.  I received an error report - The file "I Tunes Library .itl" cannot be read because it was created by a new  version of I Tunes.  What does that mean?

    I just downloaded I Tunes to my new computer.  I had I Tunes on old computer.  When I clicked on the icon on desktop I received the following pop-up.
    the file "I tunes Library .itl" cannot be read because it was created by a new version of i tunes.  What does that mean?

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • TS1717 error message "The file "I Tunes Library.itl" cannot be read because it was created by a newer version of Itunes."  I cannot get Itunes to launch at all

    I get the error message The file "iTunes Library.itl" cannot be readbecause it was created by a newer version of itunes.
    I tunes will not start, so I can't deauthorize the computer and do an uninstall/reinstall.
    I have no idea what this means b/c I didn't import a new library.
    Any help would be appreciated.

    no one?

  • I'am getting an update error when am trying to upgrade to newer version (4.3.2)..the error message content shows that i tunes could not back up the i pod,because the back up was corrupt or not compatible with ipod..can anyone help me out to fix this issue

    I'am getting an update error when am trying to upgrade to newer version (4.3.2)..the error message content shows that i tunes could not back up the i pod,because the back up was corrupt or not compatible with ipod..can anyone help me out to fix this issue

    Hi,
    Try here:  http://support.apple.com/kb/HT1808. 
    Hope this helps! 
    ---likeabird---

  • The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help please?

    Since yesterday I have been trying to get my iTunes to allow me to sync my iPhone with it to get the latest update. However, once I finally managed to download it iTunes would now allow for it to sync, telling me I needed the 64 bit iTunes which I already had and had downloaded at least 4 times trying to get it to work.
    I followed someone elses advice and uninstalled all apple products and went to reinstall it and now I am getting the following message.
    The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes.
    Does anyone know how to fix this problem? And possibly even my other problem with the inability to sync my iPhone with iTunes?
    Thank you.

    no one?

  • Error message: 'the file 'i tunes library .itl' cannot be read because it was created by a newer version of itunes'

    When trying to sync my nano 5th Gen i got a message saying there was a problem and to try uninstalling and reinstalling. I did this step by step, but when reinstalling i was presented with this message. 'The file 'i Tunes library .itl' cannot be read because it was created by a newer version of iTunes'. Any ideas what i can doto rectify this????
    Thanks

    If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
    Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
    Not sure if the following site/link will tell the method...
    •Apple - Support - iTunes - install & update:
    http://www.apple.com/support/itunes/install/
    •Troubleshooting iTunes installation on Mac OS X:
    http://support.apple.com/kb/HT2311
    Good luck & happy computing!
    ps: i see you resolved this issue. it's magic!

Maybe you are looking for

  • Storage Location wise Stock details on a specific Date

    Dear All, Please help me with any T-code or Process by which I will be able to view the opening & closing stock storage location wise on a specific date. In MC.9 it shows the stock on current date or Month-End. In MB5B it will show the stock but not

  • User blogs "gone" after reboot

    On 10.5.1 server, I had three users (myself included) that had started blogs. On a reboot of the server, then re-surfing to the page, I get "no available users". However, If I type in a name, the blog entries exist. Note: I'm using Active Directory (

  • Error message "not digitally signed or not signed in the appropriate manner

    My computer keeps crashing and I discovered that it is not recognizing a hardware device.  The device is the printer.  When I check further, it asks for driver updates and when I try to do that, I get an error message "not digitally signed or not sig

  • Invalid use of destroyed classloader

    Using Apache AXIS, we get the following error after our application has been hot redeployed . There is no problem on the front-end, even as far as functionality, however an error is generated in the log. It seems that the class gets destroyed and doe

  • Outer Dial in Color Wheel Disappeared

    SpeedGrade 2014.2 Although the vertical sliders are still there, are more intuitive and I can use them, the outer dials in the color wheel have disappeared. I have checked the update notes but cannot find any reference to these dials being intentiona