7.5: strange behaviour on data entry schedule

Hi,
I have a very strange problem when entering data. A user can enter data and send it to the database with no error but the schedule then does not display it. I have investigated a bit and found out that:
a) if I remove all summation accounts from the schedule the value is shown correctly
b) it only happens for 4 "special" periods we have in our time dimension.
So, to explain those two a bit more.
a)
The input schedule was originally set up using the account for profit from the P&L in the current view and a member set of SELF,ALL. When a user now enters data onto the first base level account (SALES THIRD PARTY) it will be sent to the database but after a refresh of the schedule it won't be displayed any more. If I change the member set to BAS the value will be displayed.
b)
For 2011 we have a few companies that cannot deliver data on a monthly level, they can only deliver data on a quarterly level. So, since our application is YTD but uses the periodic option on currency conversion, simply loading the data for those entities into MARCH, JUNE, SEPTEMBER and DECEMBER will not work on currency conversion. We therefore set up four new periods (TIMEID = 20111400, 20111500, 20111600 and 20111700) to enter the data into. As these are four consecutive periods, the periodic conversion should then work as expected. And for reporting we will have to manually add 20110300 and 20111400, 20110600 and 20111500 etc together. These periods are set up as LEVEL=MONTH.
Does anyone have an idea what might be the problem here?
Thanks,
Arnold

Hi Arnold
Could you share your solution for that.
I have very similar problem. I'm using addtional time base level members to store data quarterly. I'm using script logic co copy data from MAR to additional member Q1_INPUT ,JUN to Q2 input etc.... Later client input manual adjustmets on these additional members quarterly.
Script is working fine, I checked in BW RSA1 that data was sucesfully save, but not displaing in my input schedule for special members.
What is strange I noticed problem with displaing data on additional members in only for AST/LEQ accounts, for INC/EXP they are visible in my input schedule.
I have no idea why this happens.
Regards
Justyna

Similar Messages

Strange behaviour of data element object

Dear Gurus,
I have incremented the field length of a z table's field from 5 (type DEC) to 8 by increasing the corresponding domain length . But the internal tables that refer to this field still refer to the old value 5, though the table is accepting values for this field with 8 length through 'Create Entries' in SE11.
The problem seems to be in the runtime object of the corresponding data element which shows
database length = 5
abap length = 5
BUT dictionary length = 8.
Could anyone pls help diagnose this strange behaviour as even if I create new domains with new data elements for this table field ,it gives the SAME RUNTIME OBJECT STATUS as mentioned above.
Rewards are awaiting the right answer.
Thanks in advance.
Shweta.

Hi,
For these kind of problems, you can use the Database utility tool (SE14), give the table name press enter, click Adjust and Activate Database table also select save data radiobutton. After this Re-Run the Program, it works fine, also cross-check in the Debugging screen.
Cheers...
Santosh.
Mark Usefull Answers.

Strange behaviour of data field in Monthly Invoice.

Dear all,
I need to create new layout for monthly invoice using Print Layout Designer. I need to add the closing date procedure code, so I create new data field refering to the Closing Date Procedure file. This first data field shows many files. But when I want to add another new data field, this second data field only shows the Administration and Closing Date Procedure file. I need to add field from other file, but it does not appear.
If I delete the second data field, I can find the file I need in the first data field (the one supposed to be fill with closing date procedure code).
Is there any idea how to get other files in the second data field ?
By the way, I am using SBO version 2004.2b for Japanese user, and monthly invoice is an important function in Japan.
Thank you very much,
Emiliana

Thank you, Adele.
Do you also know how to display list of the variables used in the monthly invoice layout ?
Thanks again.
Emiliana

Strange behaviour from new 2012R2 in old domain

Hi all,
At work (education level), I'm starting to take charge of windows admin, so beiing a noob admin I'm finding strange behaviours that I hope you can help me solve them all :-)
We've one (big) domain with about 5000 computers (workers and students all together), and around 50000 users (again, workers and students all together) setup like this:
DC-DOMAIN-1:
Windows Server 2008R2
Shares NETLOGON and SYSVOL
DC-DOMAIN-2:
Windows Server 2003 R2 x64
Shares CertEnroll, NETLOGON, SMSLOGON, SYSVOL
Checking RootDSE, I see 'domainControllerFunctionaly is Windows 2003' (DC-DOMAIN-2)
So, with this setup, I've noticed these strange behaviours, hope list isn't too big (guess there will be more behaviours but these seemed too odd):
1) On DC-DOMAIN-2, WinServer 2003 eventlog, inside 'Directory Service', I found this warning event ID 1083 (Source NTDS Replication):
Active Directory could not update the following object with changes received from the domain controller at the following network address because Active Directory was busy processing information.
Object:CN=<an user name>, CN=Users, DC=DOMAIN
Usually followed by an information event (eventid 1955) which says:
ctive Directory encountered a write conflict when applying replicated changes to the following object.
Object:
<SAME USER OBJECT THAN PREVIOUS EVENT ID>
Time in seconds:
0
Event log entries preceding this entry will indicate whether or not the update was accepted.
A write conflict can be caused by simultaneous changes to the same object or simultaneous changes to other objects that have attributes referencing this object. This commonly occurs when the object represents a large group with many members, and the functional level of the forest is set to Windows 2000. This conflict triggered additional retries of the update. If the system appears slow, it could be because replication of these changes is occurring.
User Action
Use smaller groups for this operation or raise the functional level to Windows Server 2003.
And having as result that user being blocked in domain.
2) I've added a new print server based on Windows Server 2012R2 (running inside an updated ESX 5.5 with VMXNET3 ethernet adapter as recommended by vmware), and seen in the event viewer these warnings/errors:
At System log:
Error Event ID 5783, Source NETLOGON:
The session setup to the Windows NT or Windows 2000 Domain Controller \\DC-DOMAIN-2.fulldns.name for the domain DOMAIN is not responsive. The current RPC call from Netlogon on \\PRINTSERVER to \\DC-DOMAIN-2.fulldns.name has been cancelled.
I've seen Event ID 5783 with DC-DOMAIN-1 too....
Error Event ID 5719, Source NETLOGON:
This computer was not able to set up a secure session with a domain controller in domain DOMAIN due to the following:
The remote procedure call failed and did not execute.
This may lead to authentication problems. Make sure that
this computer is connected to the network. If the problem persists, please contact your domain administrator.
ADDITIONAL INFO:
If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain.
At Microsoft-Windows-TerminalServices-RemoteConnectinoManager/Admin found also this warning:
Warning Event ID 20499 Source TerminalServices-RemoteConnectionManager:
Remote Desktop Services has taken too long to load the user configuration from server \\DC-DOMAIN-2.fulldns.name for user administrator
3) If I try Group Policy Modeling on DC-DOMAIN-1 (server 2008R2), everything works fine, no matter if I try it against DC-DOMAIN-1 or DC-DOMAIN-2, but if I try this from the Server 2012R2 (the one from point 2), I get this:
Simulation against DC-DOMAIN-2: Gets executed, but all GPO show as inaccessible, empty or disabled.
Simulation against DC-DOMAIN-1: Sometimes it gets executed as DC-DOMAIN-2, sometimes I get an error saying query can't be executed.
4) From server 2012R2, I usually manage printing GPO. If I click on the domain root (GPMC, forest, Domains, DOMAIN-NAME-ROOT) right pane, I get a pop up saying:
'A processing error ocurred collecting data using this base domain controller. Please change the base domain controller and try again'
After closing popup, right pane says something like 'DC-DOMAIN-2.fulldns.name' is the baseline domain controller for this domain.
No infrastructure Status information exists for this domain.
Click the Detect Now button below to gather infrastructure status from all of the domain controllers in this domain.
Pressing 'Detect Now' does nothing, and trying to select New Baseline DC shows again same pop up than before.
5) Last, but not least, I've feeling that GPO takes too much to apply. I've found scenarios in which even after executing 'gpupdate /force' correctly on client computer either local or domain admin, I can't see the new changes (gpresult says it has been
updated though). But couldn't find anything on eventlog that informs about problems with GPOs...
For all these strange behaviours I've noticed in last month that I started checking things as sys admin, I believe domain is damaged, or something is wrong there (not just my new server 2012R2, even if it's running inside an ESX, blehh), so please, any hint
on what to check, what to change, what to fix, would be highly appreciated.
Thanks in advance.

Hi Paul,
Honestly, I'm still trying to figure out all broken things reported by tests :( Guess Jesper's suggestion about adding a new 2008 DC to get rid of 2003 and start checking again after that may be best option.
I'll try to summarize list of things I believe are wrong:
running
DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log for every DC, shows different errors. They show things such as:
another domain running here (not administered by us, only relationship is that our users are shared with that domain, nothing else) appear when Printing out pDsInfo (as if they were DC of our domain too, but they do not even share RootDomain). Guess it
may be for a bug old sys admin had when clonning from his 2008R2 template, that forgot to change SID... I already noticed 1 year ago our print server shared SID with those DC, guess there may be more servers sharing SID too :-(
Within Starting test: Replications, I see few messages at Replication Latency Check, such as the one for CN=Schema, CN=Configuration, DC=<ourdomain>:
Latency information for 35 entries in the vector were ignored.
35 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC)
On Services test, I see an
Invalid service type: RpcSs on DC-DOMAIN-3, current value
WIN32_OWN_PROCESS, expected value WIN32_SHARE_PROCESS
On SystemLog, I see LOTS of warnings/errors such as:
A warning event occurred. EventID: 0x80000002
Time Generated: 07/28/2014 08:21:54
(Event String (event log = System) could not be retrieved, error
0x503)
An error event occurred. EventID: 0xC0000003
Time Generated: 07/28/2014 08:22:18
(Event String (event log = System) could not be retrieved, error
0x3afc)
Missing entries on DNS (we've a static DNS)
netdiag.exe /v > c:\netdiag.log Showed again DNS problems such as our primary DNS pointing to all DC, secondary
DNS pointing just to DC with FSMO roles,...
repadmin.exe /showrepl * /verbose /all /intersite > c:\repl.txt Gave no errors, now I must check in detail
if every replica is correct
And finally,
dnslint /ad /s "ip address of your dc" gave more DNS problems:
One or more DNS servers may not be authoritative for the domain
One or more DNS servers did not respond to UDP queries
One or more zone files may have expired
SOA record data was unavailable and/or missing on one or more DNS servers
Sumarizing, guess it will be better to fix DNS problems, promote new 2008R2 DC to get rid of 2003 one, promote domain to 2008 too, check again for messages and relationship with other domain, and then come back here for support if needed
EDIT: Almost forgot to talk about SYSVOL folder. As said before, there are 426 GPO folders inside Policies. Of them, 375 have an inetres.adm files in it (smallest one 1398 KB, almost all of them 2307 or 2707 kb)....

Communication Channel Strange Behaviour

Hi,
We are facing a strange behaviour with communication channel monitoring in RWB for JMS Adapter.
I am sending data from IDoc to JMS. Message is processed successfully inside Integration Engine of PI.Message monitoring in RWB shows status successful.But ,if I monitor communication channel in RWB, under cluster node --> cluster node for Channel 'X' shows status green & in short log - I got an message "JMS message processed successfully at 2009-04-17|05:25:06+0100;JMS & XI identifiers are ID :414d515 & 457e345 respectively".
This information is always updated, when i run my interface & shows the latest three enteries there with information provided above in bold.
But if i see the processing details for Cluster node (Where we usually see the processing of message with its Message ID), there is no entry with Time Stamp & message ID & explanation.
Any idea why such a behaviour?
Thanks,
Venky

Hi,
hmmmm..........strange............
just check if you have multiple server nodes and you are selecting the server node with msg processing and then whether in processing details you are seeing your msgs or not............
also check if the msgs are processed just now or are processed some hours ago - if they are processed some hours ago then may be you do not have their processing details available currently but if they are processed just now, then you should be able to see their processing details..........
if the problem remains, then ask your basis guys to restart your XI J2EE engine and see if you then able to get processing details for your new msgs.........
Regards,
Rajeev Gupta

Aliases file - Strange Behaviour

Greetings all,
I've been having some strange behaviour with my Postfix installations lately. My logfiles are filled with intermittent entries of:
Oct 17 18:52:10 xserve1 postfix/smtpd[4117]: table hash:/etc/aliases(0,lock|fold_fix) has changed -- restarting
Oct 17 18:52:12 xserve1 postfix/local[4129]: table hash:/etc/aliases(0,lock|no_regsub|no_proxy|no_unauth|fold_fix) has changed -- restarting
This would seem to be a minor nuissance, but unfortunately it seems that mails are arriving in the second or two it takes for Postfix to restart, and are getting rejected or delayed because the service isn't available.
Looking at the /etc/aliases/postfix file, something seems to be intermittently touching it. I don't see any changes to the file content, but the modification date is updated, and an extended (@) file attribute is added for "com.apple.TextEncoding".
The only recent changes I have made to my config were to enable SASL with some directives ("smtpd_tls_auth_only = yes" for example) to ensure proper security.
My servers are running 10.6.5 and 10.6.4. Any suggestions would be appreciated. Thanks.

Looking at the logs, I'm begining to suspect that the offender is "com.apple.wikid.mailinglists". I don't use group mailing lists so I've disabled this item by adding disabled-true to its plist. Hopefully this solves the problem.

Delivery before the schedule line date in scheduling agreement.

Hi All,
I have a situation where in I am using JIT delivery schedule for processing the delivery requirement from customer. In this, lets say, I have a schedule as 08/05/2009 for material A to deliver 1000 qty and the material is made available to me after production as of 07/05/2009 and I want to despatch the material on 7th only and not on 8th. The system does not allow me to do this.It allows me to make a delivery only on 08/05/2009.
Is there any alternative to this and is this SAP standard behaviour.

I think you can change the schedule line date in scheduling agreement itself and do the delivery.
regards,
Sudhir

Strange behaviour: two servers on the same port

Hi!
I hope this is the right section for this post. I need help about a strange behaviour involving a ServerSocket.
For my thesis I need to write a program that receives data from a pre-existing DSMS client, filters them and then sends them to a pre-existing DSMS server. And here is my problem: if I try to create a ServerSocket on the same port of the DSMS server, my program throws no exception, and the servers seem running on the same port. This is a behaviour that I'd like to avoid, but I cannot understand what the problem is. Can you help me?
The source code of the DSMS server can be found here (it's written in C++): http://infolab.stanford.edu/stream/code/stream-0.6.0.tar.gz
The source code of my server class, instead, is this one:
import java.io.*;
import java.net.*;
public class ThreadGenerator {
     private ServerSocket server;
     public void connect(String servPort, String cHost, String cPort) {
          try {
               server = new ServerSocket(servPort);
               System.out.println("SERVER running on port "+servPort);
          } catch (BindException e) {
               System.out.println("Address already in use!");
          } catch (Exception e) {
               System.err.println(e);
          try {
               while(true){
                    Socket client = server.accept();
                    StreamThread T = new StreamThread(client, cHost, cPort);
                    T.start();
          } catch (EOFException e) {
               System.out.println("Server closed connection!");
          } catch (Exception e) {
               System.err.println(e);
}I'm programming on Mac OSX Tiger, with Java 1.5.0.
Thanks in advance for your help.

The problem is still happening to me, I tried in this very moment. The code I'm using is the one I posted, and the second server is the one that I linked. I don't think there's anything else to add.
If you're sure that the problem is not in my code, then it means that it is in the linked server, which partially solves the problem. But I'd like to know, if it's possibile, if there is any other way to check if the port is already in use.

Strange behaviour in Mail

I have ongoing strange behaviour with Mail in Mountain Lion on a MacBook Pro.
As well as randomly and intermitttently dropping connections to my various mail servers, I also, randomly and intermittently, fail to get to Print, or to create a new Mailbox, or to Quit. I just get a beep.
Have to quit Mail - sometimes forcibly, and restart it.
Mail will not automatically reconnect to servers after a Sleep , or moving to a differnt location.
None of this was happenning on an older MacBook, but I was running 10.7 on that machine.
Had to upgrade machine to allow upgrade to Mountain Lion. Not sure which is responsible - new MB PRo , or 10.8?!
Do I really have to re-install OSX just to reinstall Mail?
Any other pointers/hints very welcome.
Thanks

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Strange behaviour of Removal of Alpha for Info object in Quality system

Strange behaviour of Removal of Alpha for Info object in Quality system as compared to Development system.
Hi,
The data for an info object Key in the DSO was 00000000000000000000000000123. I removed Alpha for the info object and data was corrected to 123 in the DSO in development system.
Now, when i transported the info object without alpha to quality and loaded data into DSO, the data is still the same with leading zeros.
I dont want to write routine to remove leading zeros, as I have values as 0. If i write routine, all zeros will be removed and this will be blank.
Both development and quality have same patches applied and are on same level.
Why is this strange behaviour in quality system...
Any inputs?? please suggest.
Thanks.
Lavanya

Hi,
Did you drop and reload the data after changing the conversion?
Regards,
Raghavendra.

[SOLVED] French Canadian keyboard strange behaviour

Hello!
I just upgraded to Gnome 2.30 in [testing] and my keyboard has a strange behaviour. With Gnome 2.28, my keyboard layout was set to Canadian French (legacy), and still is, though some of the keys do not behave the same. For instance, the accents "`", "¸" and ^ do not behave as usual, but rather give me some letter with that accent on it, rather than letting me choose the letter on which put the accent.
Moreover, the SHIFT+3 combination gives me a # instead of a /, but not in all software. Google Chrome has the good behaviour, but gnome-terminal gives me a #.
Do you understand any of this?
I'll post the packages I have upgraded.
[2010-04-05 01:09] upgraded openssl (0.9.8n-1 -> 1.0.0-2)
[2010-04-05 01:09] upgraded python (2.6.5-2 -> 2.6.5-3)
[2010-04-05 01:09] upgraded pygobject (2.20.0-1 -> 2.21.1-1)
[2010-04-05 01:09] upgraded pygtk (2.16.0-2 -> 2.17.0-1)
[2010-04-05 01:09] upgraded gnome-menus (2.28.0.1-1 -> 2.30.0-1)
[2010-04-05 01:09] upgraded libsoup (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:09] upgraded libldap (2.4.21-1 -> 2.4.21-2)
[2010-04-05 01:09] upgraded libidl2 (0.8.13-1 -> 0.8.14-1)
[2010-04-05 01:09] upgraded orbit2 (2.14.17-1 -> 2.14.18-1)
[2010-04-05 01:09] upgraded gconf (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:09] upgraded gnome-keyring (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:09] upgraded heimdal (1.3.1-3 -> 1.3.2-1)
[2010-04-05 01:09] upgraded libsoup-gnome (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded gnome-icon-theme (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded libgweather (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded evolution-data-server (2.28.3.1-1 -> 2.30.0-2)
[2010-04-05 01:10] upgraded gnome-desktop (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded libwnck (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded libunique (1.1.6-1 -> 1.1.6-2)
[2010-04-05 01:10] upgraded gnome-disk-utility (2.28.1-1 -> 2.30.1-1)
[2010-04-05 01:11] upgraded libarchive (2.8.3-1 -> 2.8.3-3)
[2010-04-05 01:11] upgraded smbclient (3.5.1-1 -> 3.5.1-2)
[2010-04-05 01:11] upgraded gvfs (1.4.3-1 -> 1.6.0-1)
[2010-04-05 01:11] upgraded gnome-vfs (2.24.2-2 -> 2.24.3-2)
[2010-04-05 01:11] upgraded libbonobo (2.24.2-1 -> 2.24.3-1)
[2010-04-05 01:11] upgraded libgnome (2.28.0-2 -> 2.30.0-1)
[2010-04-05 01:11] upgraded libart-lgpl (2.3.20-1 -> 2.3.21-1)
[2010-04-05 01:11] upgraded libgnomecanvas (2.26.0-1 -> 2.30.1-1)
[2010-04-05 01:11] upgraded libbonoboui (2.24.2-1 -> 2.24.3-1)
[2010-04-05 01:11] upgraded librsvg (2.26.0-2 -> 2.26.2-1)
[2010-04-05 01:11] upgraded gnome-panel (2.28.0-2 -> 2.30.0-1)
[2010-04-05 01:11] upgraded libgnomeui (2.24.2-1 -> 2.24.3-1)
[2010-04-05 01:11] upgraded gnome-python (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:11] upgraded alacarte (0.12.4-2 -> 0.13.1-1)
[2010-04-05 01:11] upgraded apache (2.2.15-1 -> 2.2.15-2)
[2010-04-05 01:11] upgraded at-spi (1.28.1-1 -> 1.30.0-1)
[2010-04-05 01:11] upgraded totem-plparser (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded brasero (2.28.3-2 -> 2.30.0-1)
[2010-04-05 01:12] upgraded icu (4.2.1-1 -> 4.4-1)
[2010-04-05 01:12] upgraded brltty (4.1-2 -> 4.1-3)
[2010-04-05 01:12] upgraded libgtop (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:12] upgraded bug-buddy (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded cheese (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded clutter (1.0.10-1 -> 1.2.4-1)
[2010-04-05 01:12] upgraded clutter-gtk (0.10.2-1 -> 0.10.2-2)
[2010-04-05 01:12] upgraded libxklavier (4.0-1 -> 5.0-1)
[2010-04-05 01:12] upgraded libgnomekbd (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded gnome-settings-daemon (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded zenity (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:13] upgraded metacity (2.28.1-1 -> 2.30.0-2)
[2010-04-05 01:13] upgraded gnome-control-center (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:13] upgraded compiz-decorator-gtk (0.8.4-2 -> 0.8.4-3)
[2010-04-05 01:13] upgraded libcups (1.4.2-5 -> 1.4.3-2)
[2010-04-05 01:13] upgraded openslp (1.2.1-2 -> 1.2.1-3)
[2010-04-05 01:13] upgraded cups (1.4.2-5 -> 1.4.3-2)
[2010-04-05 01:13] upgraded curl (7.20.0-1 -> 7.20.0-2)
[2010-04-05 01:13] upgraded cvs (1.11.23-4 -> 1.11.23-5)
[2010-04-05 01:13] upgraded postgresql-libs (8.4.3-1 -> 8.4.3-2)
[2010-04-05 01:13] upgraded cyrus-sasl-plugins (2.1.23-1 -> 2.1.23-2)
[2010-04-05 01:13] upgraded cyrus-sasl (2.1.23-3 -> 2.1.23-4)
[2010-04-05 01:13] upgraded dbus-python (0.83.0-2.1 -> 0.83.1-1)
[2010-04-05 01:13] upgraded gnome-python-desktop (2.28.0-3 -> 2.30.0-1)
[2010-04-05 01:13] upgraded deskbar-applet (2.28.0-3 -> 2.30.0-1)
[2010-04-05 01:13] upgraded dnsutils (9.6.1-2 -> 9.6.1-3)
[2010-04-05 01:14] upgraded eog (2.28.2-2 -> 2.30.0-1)
[2010-04-05 01:14] upgraded libwebkit (1.1.15.4-3 -> 1.1.90-2)
[2010-04-05 01:14] upgraded gobject-introspection (0.6.6-1 -> 0.6.9-1)
[2010-04-05 01:14] upgraded epiphany (2.28.2-2 -> 2.30.0-1)
[2010-04-05 01:14] upgraded evince (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:14] upgraded gtkhtml (3.28.3-1 -> 3.30.0-1)
[2010-04-05 01:14] upgraded evolution-exchange (2.28.3-1 -> 2.30.0-2)
[2010-04-05 01:14] upgraded evolution-webcal (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:14] upgraded file-roller (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded gcalctool (5.28.2-1 -> 5.30.0-1)
[2010-04-05 01:15] upgraded gconf-editor (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded gnome-session (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded gdm (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded gtksourceview2 (2.8.2-1 -> 2.10.0-1)
[2010-04-05 01:15] upgraded pygtksourceview2 (2.8.0-1 -> 2.10.0-1)
[2010-04-05 01:15] upgraded gedit (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded git (1.7.0.3-1 -> 1.7.0.4-1)
[2010-04-05 01:15] upgraded libsigc++2.0 (2.2.4.2-1 -> 2.2.5-1)
[2010-04-05 01:15] upgraded glibmm (2.22.1-1 -> 2.24.0-1)
[2010-04-05 01:15] upgraded gucharmap (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:16] upgraded gnome-applets (2.28.0-2 -> 2.30.0-1)
[2010-04-05 01:16] upgraded gnome-backgrounds (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:16] upgraded gnome-bluetooth (2.28.6-1 -> 2.30.0-1)
[2010-04-05 01:16] upgraded vte (0.22.5-1 -> 0.24.0-2)
[2010-04-05 01:16] upgraded gnome-desktop-sharp (2.26.0-3 -> 2.26.0-5)
[2010-04-05 01:16] upgraded gnome-doc-utils (0.18.1-1 -> 0.20.0-1)
[2010-04-05 01:17] upgraded gnome-games (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gnome-games-extra-data (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gnome-mag (0.15.9-1 -> 0.16.1-1)
[2010-04-05 01:17] upgraded gnome-media (2.28.5-1 -> 2.30.0-2)
[2010-04-05 01:17] upgraded gnome-netstatus (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:17] upgraded gnome-nettool (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gnome-power-manager (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gnome-screensaver (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gtkmm (2.18.2-1 -> 2.20.0-1)
[2010-04-05 01:17] upgraded gnome-system-monitor (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:18] upgraded system-tools-backends (2.8.3-1 -> 2.10.0-1)
[2010-04-05 01:18] upgraded liboobs (2.22.2-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded nautilus (2.28.4-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded gnome-system-tools (2.28.2-1 -> 2.30.0-2)
[2010-04-05 01:18] upgraded gnome-terminal (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded gtk-engines (2.18.5-1 -> 2.20.0-1)
[2010-04-05 01:18] upgraded gnome-themes (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded gnome-user-share (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded gnome-utils (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:19] upgraded xulrunner (1.9.2.2-2 -> 1.9.2.3-1)
[2010-04-05 01:19] upgraded yelp (2.28.1-2 -> 2.30.0-1)
[2010-04-05 01:19] upgraded gnome2-user-docs (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:19] upgraded gok (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:19] upgraded grep (2.6.2-1 -> 2.6.3-1)
[2010-04-05 01:19] upgraded gstreamer0.10-bad (0.10.18-2 -> 0.10.18-3)
[2010-04-05 01:19] upgraded neon (0.28.6-2 -> 0.28.6-4)
[2010-04-05 01:19] upgraded gstreamer0.10-bad-plugins (0.10.18-2 -> 0.10.18-3)
[2010-04-05 01:19] upgraded hamster-applet (2.28.2-1 -> 2.30.0.1-1)
[2010-04-05 01:19] upgraded net-snmp (5.5-2 -> 5.5-3)
[2010-04-05 01:19] upgraded hplip (3.9.12-5 -> 3.10.2-1)
[2010-04-05 01:20] upgraded imap (2007e-1 -> 2007e-2)
[2010-04-05 01:20] upgraded jre (6u18-2 -> 6u19-2)
[2010-04-05 01:21] upgraded kdebase-workspace (4.4.2-1 -> 4.4.2-2)
[2010-04-05 01:21] upgraded kernel26-firmware (2.6.33.1-1 -> 2.6.33.2-1)
[2010-04-05 01:24] upgraded kernel26 (2.6.33.1-1 -> 2.6.33.2-1)
[2010-04-05 01:24] upgraded kernel26-headers (2.6.33.1-1 -> 2.6.33.2-1)
[2010-04-05 01:24] upgraded lib32-glib2 (2.22.5-1 -> 2.24.0-1)
[2010-04-05 01:24] upgraded lib32-atk (1.28.0-1 -> 1.30.0-1)
[2010-04-05 01:24] upgraded lib32-e2fsprogs (1.41.10-1 -> 1.41.11-1)
[2010-04-05 01:24] upgraded lib32-openssl (0.9.8n-1 -> 1.0.0-2)
[2010-04-05 01:24] upgraded lib32-heimdal (1.3.1-3 -> 1.3.2-1)
[2010-04-05 01:24] upgraded lib32-libcups (1.4.2-5 -> 1.4.3-2)
[2010-04-05 01:24] upgraded lib32-pango (1.26.2-1 -> 1.28.0-1)
[2010-04-05 01:24] upgraded lib32-gtk2 (2.18.9-2 -> 2.20.0-2)
[2010-04-05 01:24] upgraded lib32-libgl (7.7-1 -> 7.7.1-0.1)
[2010-04-05 01:24] upgraded lib32-libxml2 (2.7.6-2 -> 2.7.7-1)
[2010-04-05 01:24] upgraded lib32-mesa (7.7-1 -> 7.7.1-0.1)
[2010-04-05 01:24] upgraded lib32-qt (4.6.2-2 -> 4.6.2-3)
[2010-04-05 01:24] upgraded libepc (0.3.10-1 -> 0.3.11-1)
[2010-04-05 01:24] upgraded libfetch (2.30-1 -> 2.30-3)
[2010-04-05 01:24] upgraded libgail-gnome (1.20.1-1 -> 1.20.2-1)
[2010-04-05 01:24] upgraded libgdata (0.4.0-1 -> 0.6.4-1)
[2010-04-05 01:24] upgraded libgnomecups (0.2.3-6 -> 0.2.3-7)
[2010-04-05 01:24] upgraded libgnomeprint (2.18.6-2 -> 2.18.7-2)
[2010-04-05 01:24] upgraded libgnomeprintui (2.18.4-1 -> 2.18.5-1)
[2010-04-05 01:24] upgraded librpcsecgss (0.19-2 -> 0.19-3)
[2010-04-05 01:24] upgraded libssh (0.4.1-1 -> 0.4.1-3)
[2010-04-05 01:25] upgraded libxml++ (2.26.0-1 -> 2.30.0-1)
[2010-04-05 01:25] upgraded links (2.2-3 -> 2.2-4)
[2010-04-05 01:25] upgraded lynx (2.8.7-1 -> 2.8.7-2)
[2010-04-05 01:25] upgraded sbcl (1.0.35-1 -> 1.0.37-1)
[2010-04-05 01:25] upgraded maxima (5.20.1-2 -> 5.20.1-3)
[2010-04-05 01:25] upgraded mercurial (1.5-1 -> 1.5.1-1)
[2010-04-05 01:26] upgraded miro (2.5.4-4 -> 3.0-1)
[2010-04-05 01:26] upgraded mousetweaks (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:26] upgraded nasm (2.07-1 -> 2.08.01-1)
[2010-04-05 01:26] upgraded nautilus-actions (1.12.2-1 -> 2.30.0-1)
[2010-04-05 01:26] upgraded nautilus-open-terminal (0.18-1 -> 0.18-2)
[2010-04-05 01:26] upgraded nautilus-sendto (2.28.2-1 -> 2.28.4-1)
[2010-04-05 01:26] upgraded samba (3.5.1-1 -> 3.5.1-2)
[2010-04-05 01:26] upgraded nautilus-share (0.7.2-4 -> 0.7.2-5)
[2010-04-05 01:26] upgraded network-manager-applet (0.8-2 -> 0.8-3)
[2010-04-05 01:26] upgraded nfs-utils (1.2.2-1 -> 1.2.2-2)
[2010-04-05 01:26] upgraded nmap (5.21-1 -> 5.21-2)
[2010-04-05 01:26] upgraded ptlib (2.6.5-1 -> 2.6.5-2)
[2010-04-05 01:27] upgraded opal (3.6.6-1 -> 3.6.6-2)
[2010-04-05 01:27] upgraded openntpd (3.9p1-10 -> 3.9p1-11)
[2010-04-05 01:28] upgraded openoffice-base (3.2.0-1 -> 3.2.0-3)
[2010-04-05 01:28] upgraded openssh (5.4p1-3 -> 5.4p1-4)
[2010-04-05 01:28] upgraded openvpn (2.1.1-1 -> 2.1.1-2)
[2010-04-05 01:28] upgraded orca (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:28] upgraded perl-crypt-ssleay (0.57-3 -> 0.57-4)
[2010-04-05 01:28] upgraded perl-uri (1.52-1 -> 1.54-1)
[2010-04-05 01:28] upgraded php (5.3.2-4 -> 5.3.2-6)
[2010-04-05 01:28] upgraded php-apache (5.3.2-4 -> 5.3.2-6)
[2010-04-05 01:28] upgraded pixman (0.16.6-1 -> 0.18.0-1)
[2010-04-05 01:28] upgraded postfix (2.7.0-1 -> 2.7.0-2)
[2010-04-05 01:28] upgraded qt (4.6.2-2 -> 4.6.2-3)
[2010-04-05 01:28] upgraded qtscriptgenerator (0.1.0-3 -> 0.1.0-4)
[2010-04-05 01:29] upgraded rhythmbox (0.12.7-1 -> 0.12.8-1)
[2010-04-05 01:29] upgraded ruby (1.9.1_p378-1 -> 1.9.1_p378-2)
[2010-04-05 01:29] upgraded seahorse (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:29] upgraded seahorse-plugins (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:29] upgraded sound-juicer (2.28.1-2 -> 2.28.2-1)
[2010-04-05 01:29] upgraded subversion (1.6.9-2 -> 1.6.9-4)
[2010-04-05 01:29] upgraded syslog-ng (3.0.4-3 -> 3.0.4-4)
[2010-04-05 01:29] upgraded telepathy-glib (0.10.1-1 -> 0.10.2-1)
[2010-04-05 01:29] upgraded tomboy (1.1.0-1 -> 1.2.0-2)
[2010-04-05 01:29] upgraded totem (2.28.5-2 -> 2.30.0-1)
[2010-04-05 01:29] upgraded transmission-gtk (1.92-1 -> 1.92-2)
[2010-04-05 01:30] upgraded vala (0.7.10-1 -> 0.8.0-1)
[2010-04-05 01:30] upgraded vinagre (2.28.1-2 -> 2.30.0-1)
[2010-04-05 01:30] upgraded vino (2.28.1-3 -> 2.28.2-1)
[2010-04-05 01:30] upgraded virtuoso (6.1.0-1 -> 6.1.0-2)
[2010-04-05 01:30] upgraded wget (1.12-1 -> 1.12-2)
[2010-04-05 01:30] upgraded wpa_supplicant (0.6.10-1 -> 0.6.10-2)
[2010-04-05 01:30] upgraded xorg-server (1.7.6-2 -> 1.7.6-3)
[2010-04-05 01:30] upgraded xorg-xinit (1.2.0-1 -> 1.2.1-1)
[2010-04-05 01:30] upgraded xterm (255-1 -> 256-1)
[2010-04-05 09:21] upgraded fofix-svn (1991-1 -> 2038-1)
[2010-04-05 12:31] upgraded gloobus-preview-bzr (212-1 -> 214-1)
Last edited by valandil (2010-04-06 16:52:28)

Problem solved!
I remembered I once configured my keyboard with HAL and /etc/hal/fdi/policy/10-keymap.fdi was set to xkb.layout=ca and xkd.variant=fr. I changed the GDM layout to Canada and removed the xkb.variant=fr from the .fdi file and everything was fixed!

Nokia C3-01 -strange behaviour/ problems with Noki...

When I was choosing my new mobile, I had two options : Samsung Wave 533 and Nokia C3-01. After a lot of hesitance I decided to pick up Nokia, believing to its high quality despite its poor media potential. However, now I think that it was a bad idea.
      Firstly, I have never thought that Touch and Type won't have ability to adjust brightness of the screen (AWFUL IN THE NIGHT), set up more then one alarm and use many of JAVA applications. When I tried to install some applications, it said- out of memory. Out of memory?! My old SE K770i could much more! What annoys me the most is that I can't use my e-mail account via Nokia Mail. When I press the icon of it , there is an error Null pointer exception and applications shuts. Other strange behaviour- while I was typing sms , suddenly there was hard, long vibration, screen went white and mobile restarted. Other users of C3-01, check this: go to messages, then other messages , then direct , start typing and try to go back to menu- screen turns white, mobile restarts (I'm polish , so names may be a little bit different) . How on earth, can mobile restart so often?.
    , Secondly,the funniest one- Ovi shop. Important thing in every Nokia. Guess what- I can't use it! When I to launch the apllication and try to go to the shop, there is information that it's not avaible for my phone. I used it a week ago and worked properly.
      All in all, I hope that Nokia will share an update of software to this model. I am just so disappointed. What I am sure about that next mobile will not be from finnish enterprise.
Solved!
Go to Solution.

Sorry Brother, Your Device is totally misfunctioned and FAULTY, You Need to go back to Nokia Care Centre and GET IT REPLACED.
Your Device is faulty.
Please Dont Blame Nokia Or the C3-01 Device Because both are QUALITY PRODUCTS.
I have C3-01 Since 4 Months Now and I havent Had a Single Complain about my device even though I am a Rough Handler and Using the Mobile Upto its Extend.
You Have 2 options, Try To Fix your Device at Home By :
Soft reset your Nokia C3-01 Touch and Type you need to press *#7780# and then Dial. The security code is 12345. Once you complete this, your phone will come back to factory settings, but you will not loose personal data. Anyway it is recommended to make a backup before performing any of the mentioned procedures.
To hard reset your Nokia C3-01 Touch and Type you just have to press *#7370# and press Dial. The phone will request the security code that is by default 12345. Please be aware that you will loose all the data in your phone, so you should backup all relevant information.
If Problem still persist then Connect to PC Suite/Ovi Suite and Reinstall the Firmware.
BUT U NEED YOUR DEVICE TO BE UPDATED TO ITS LATEST FIRMWARE = v06.05
If still not fixed then, REPLACE YOUR DEVICE ASAP, because as given by Nokia, C3-01 Device Works according to its Specification as Specified.
If I've helped in any way, a click upon the White star to the left would always be appreciated.
If however my answer also solves your problem clicking below " ACCEPT AS SOLUTION " it will benefit other users!

Strange behaviour on reading procfs

Hello,
I have a strange behaviour reading process table from procfs. Some processes have a resident size and image size of 0 (zero). So I wrote a little test program and generated a 32bit binary. It gave me the same result. After I made a 64bit binary and this brought the expected results. Do anyone of you have an idea what i'm making wrong. Below you can find an output example and the code of the program.
Every answer is appreciated
erinda
pfs.s32pid name nlwp %cpu %mem image resident
1 init 1 0.00 0.03 2368 1184
7 svc.startd 13 0.01 0.04 8696 1720
649 snmpd 1 0.00 0.08 0 0
24151 oracle 11 0.00 7.01 0 0
pfs.s64pid name nlwp %cpu %mem image resident
1 init 1 0.00 0.03 2368 1184
7 svc.startd 13 0.01 0.04 8696 1720
649 snmpd 1 0.00 0.08 9352 3440
24151 oracle 11 0.00 7.01 330240 286664
and here the program
int main(int ac, char * av[])
struct dirent * procEntry;
char prcPath[PRARGSZ];
psinfo_t prcInfo;
pid_t pid;
int rtc;
DIR * procDir = opendir("/proc");
if(procDir == NULL)
printf("opendir(/proc) failed\n");
return 1;
printf(" pid name nlwp %%cpu %%mem image resident\n");
printf("----------------------------------------------------------\n");
rewinddir(procDir);
while(procEntry = readdir(procDir))
if(procEntry->d_name[0] == '.' || // skip "." and ".."
procEntry->d_name[0] == '\0') // skip empty name
continue;
pid = atoi(procEntry->d_name);
if(pid == 0 || pid == 2 || pid == 3)
continue;
size_t size = sizeof(psinfo_t);
sprintf (prcPath, "/proc/%s/psinfo", procEntry->d_name);
int pprocfs = open(prcPath, O_RDONLY);
if (pprocfs < 0)
return 2;
else
ssize_t bytesRead = read(pprocfs, &prcInfo, size);
if (bytesRead != size)
return 3;
close (pprocfs);
printf(" %5d %-15s %4d %5.2f %5.2f %8lu %8lu\n",
prcInfo.pr_pid,
prcInfo.pr_fname,
prcInfo.pr_nlwp,
(float)(100.0 * prcInfo.pr_pctcpu / 0x8000),
(float)(100.0 * prcInfo.pr_pctmem / 0x8000),
(ulong_t)prcInfo.pr_size,
(ulong_t)prcInfo.pr_rssize);
}

Hello.
If a 32 bit process reads from /proc different structures are returned as if a 64 bit process reads the same files.
In the OpenSolaris sources this can be seen in http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/fs/proc/prvnops.c#2600 (line 2600).
Unfortunately a 32 bit task cannot get all information about a 64 bit task - at least not in current Solaris version. I think this is a problem to be solved by Sun...
Martin
If anyone from Sun involved in the development of the procfs reads this: My proposal is:
/proc/xxx/psinfo32 and psinfo64 and a symlink psinfo. The symlink's destination depends on the reading processes data model....
(The same should be done with all files (lwpinfo...) in /proc).
Another idea is a special IOCTL that controls if a 32 bit task wants to access the 64 bit structures...

Strange behaviour in ORacle Forms Webutil 106 / Error message WUC-14 WUC-12

This is to inform you about a strange behaviour in Webutil V1.0.6
Hosting environment is Oracle Application Server 10.1.2.0.2 on Unix Solaris 10
Oracle Server 10.2.0.4.0 Enterprise Edition
Client-envionment : Windows 2000, IE 6
I created an Forms based application which reads in certain text files into the database using
Webutil. The data will get changed using the application with logic and lateron a different textfile
will be transmitted using either ftp or it may be created on the client side (again with Webutil).
This solution worked perfect for some time (a year or so) using CLIENT_TEXT_IO...
Hoewever, during the week, I recognized users coming up with the statement that the download
to the local client does not worked anymore in certain situations. The system is producing an error-msg
on the Form in the following sequence :
WUC-14 [getFromObjectCache] ...
WUC-14 [getFromObjectCache] ...
WUC-12 [FileFunctions.newLine()] ...
I traced the session and traced WebUtil, was able to reproduce the problem but could not find out the source
of it in the first place.
Hoewever, it came out, that part of the file being created on the client is a "¿" sign : hex :$BF
This was already part of the file being read in the first place, so the value is stored in the database.
There is no problem when reading a file having a content like this with CLIENT_TEXT_IO but there obviously is one
when writing it to the local client.
The file is getting processed on the client and gets closed with CLIENT_TEXT_IO.FCLOSE.
After the FCLOSE statement is getting processed, the above errors occurs, The length of the produced file is then : 0 bytes ^^
Whenever facing a problem like this check the content of the file you are trying to create.
Workaround was :
- set workingDirectory in formsweb.cfg
- using Forms based TEXT_IO rather than CLIENT_TEXT_IO to create the file on the backend side (Apps-server)
- implement WEBUTIL_FILE_TRANSFER.AS_To_Client_With_Progress to download the file to the client
In order to make it a little bit "colourful" I implemented a bean with progressbar when creating the file on the back end side
Works perfect... and looks nice :)

XeM wrote:
Hi Andreas,
install.syslib.location.client.0=webutil\syslibi found the above line over google but when i check my webutility configuration file i didn't found it there. I added this line after the line i have mentioned in previous post but this also not worked. And then i worked on changing permission over folder.
HI XeM
Your adding location is ok. But i suggest try something different. Change the above line to
/* i'm confuse with the \ or / *\
install.syslib.location.client.0=\webutil
or
install.syslib.location.client.0=/webutilAnd do the following work In the client
1. Close ALL open browsers.
2. On the client machine search all directories for webutil.*properties and delete all instances of that file.
3. Delete d2kwut60.dll, JNIsharedstubs.dll, and jacob.dll from the JRE\bin directory.
4. Clear the JRE jar cache. This can be done several ways, but using the Java Control Panel is likely the easiest and safest.
Now stop the OC4J instance and start again and try at client...
Hope this works...
If works... please post the solutions.
Hamid

Strange behaviour BOXI R2

Post Author: Ermakov Alexey
CA Forum: .NET
using System;using System.Data;using System.Configuration;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.HtmlControls;using System.Web.UI.WebControls;using CrystalDecisions.Enterprise;using BusinessObjects.ReportEngine;using BusinessObjects.Enterprise.Desktop;using System.IO;using System.Runtime.InteropServices;using System.Collections;namespace BusinessObjectsInteroperation{ public class BusinessObjectsInterop { public void GetBinaryReportByName(string NameOfTheReport, Stream StreamForDataBeWritten, BOConfigs BOCfg, OutputFormatType OutputFormat, Hashtable PromptValues) { EnterpriseSession enterpriseSession = null; ReportEngines reportEngines = null; SessionMgr sessionMgr = new SessionMgr(); try { enterpriseSession = sessionMgr.Logon(BOCfg.BO_LoginName, BOCfg.BO_Password, BOCfg.BO_MachineToConnect, BOCfg.BO_LoginType); } catch (COMException exc) { int HRESULT = exc.ErrorCode; switch (HRESULT) { case -2147210751: throw new ArgumentException(" BO_MachineToConnect"); case -2147211005: throw new ArgumentException(" BO_LoginName"); case -2147211006: throw new ArgumentException(" BO_Password"); case -2147210653: throw new ArgumentException(" BO_LoginType"); default: throw new ArgumentException(""); } } InfoStore iStore = (InfoStore)enterpriseSession.GetService("InfoStore"); UserInfo userInfo = enterpriseSession.UserInfo; if (enterpriseSession != null) { if (reportEngines == null) { int iMinuteNumber = 1; int iLogonNumber = 1; string strToken = enterpriseSession.LogonTokenMgr.CreateWCAToken("", iMinuteNumber, iLogonNumber); reportEngines = new ReportEngines(strToken); } } IReportEngine reportEngine = reportEngines.getService(ReportEngineType.FC_ReportEngine); FullClient ReportToPrint = (FullClient)getReport(iStore, NameOfTheReport, CrystalDecisions.Enterprise.InfoStore.CeKind.FullClient); IDocumentInstance doc = null; try { doc = reportEngine.OpenDocument(ReportToPrint.ID); //ERROR Happens here } catch(Exception e) { Console.Write(e.StackTrace); } doc.Refresh(); IPrompts prompts = doc.GetPrompts(); foreach (IPrompt ip in prompts) { string OnlyOneValue=""; try { OnlyOneValue = (string)PromptValues[ip.Name]; } catch(IndexOutOfRangeException exc) { throw new ArgumentException(String.Format("Отчет {0} имеет необходимый параметр , который не был предоставлен.", NameOfTheReport, ip.Name), exc); } string[] vlArr = ; //Почему одному IPrompt надо передавать массив значений остается загадкой. ip.EnterValues(vlArr); } doc.SetPrompts(); IBinaryView docBinaryView = (IBinaryView)doc.GetView(OutputFormat); docBinaryView.WriteContent(StreamForDataBeWritten); doc.CloseDocument(); reportEngine.Close(); reportEngines.Close(); iStore.Dispose(); enterpriseSession.Logoff(); enterpriseSession.Dispose(); } private InfoObject getReport(InfoStore iStore, string Name, string Kind) { InfoObjects list = null; string query = String.Format(@" SELECT SI_ID, SI_NAME, SI_PARENTID, SI_KIND, SI_INSTANCE, SI_DESCRIPTION FROM CI_INFOOBJECTS WHERE SI_KIND='{0}' AND SI_NAME=''", Kind, Name); list = iStore.Query(query); if (list.Count == 0) { throw new Exception(String.Format("На сервере не существует отчета с именем {0}, его необходимо создать. Либо у вас нет на него прав.", Name)); } if (list.Count > 1) { throw new Exception(String.Format("На сервере существует более одного отчета с именем {0}, удалите неверный.", Name)); } foreach (InfoObject obj in list) { return obj; } return null; } public void ReportInPdfToHTTPResponse(string NameOfTheReport, params Par[] Prompts) { Hashtable PromptValues = new Hashtable(); foreach (Par p in Prompts) { PromptValues.Add(p.Key, p.Value); } HttpResponse Response = HttpContext.Current.Response; Response.Clear(); Response.ContentType = "application/pdf"; Response.AddHeader("Content-Type", "application/pdf"); Response.Expires = 0; GetBinaryReportByName(NameOfTheReport, Response.OutputStream, new BOConfigs(), OutputFormatType.Pdf, PromptValues); Response.Flush(); Response.End(); } public void ReportInXlsToHTTPResponse(string NameOfTheReport, params Par[] Prompts) { Hashtable PromptValues = new Hashtable(); foreach (Par p in Prompts) { PromptValues.Add(p.Key, p.Value); } HttpResponse Response = HttpContext.Current.Response; Response.Clear(); Response.ContentType = "application/vnd.ms-excel"; Response.AddHeader( "Content-Type", "application/vnd.ms-excel"); Response.Expires = 0; GetBinaryReportByName(NameOfTheReport, Response.OutputStream, new BOConfigs(), OutputFormatType.Xls, PromptValues); Response.Flush(); Response.End(); } } } I have this code, but it has strange behaviour.When I restart IIS and run this function first time, I get an ArgumentOutOfRangeException in reportEngine.OpenDocument(ReportToPrint.ID);But the most strange thing is that Visual Studia shows me exception dialog and if I press Continue, then it works good.On more strange thing I get about this Code. From time to time server shows me such error:An unhandled exception of type 'BusinessObjects.ThirdParty.OOC.OB.AssertionFailed' occurred in businessobjects.enterprise.sdk.netmodule Additional information: ORBacus encountered an internal error

Post Author: Ermakov Alexey
CA Forum: .NET
mscorlib.dll!System.String.LastIndexOf(char value, int startIndex) + 0x13 bytes log4net.dll!log4net.Repository.Hierarchy.Hierarchy.UpdateParents(log4net.Repository.Hierarchy.Logger log = {log4net.Repository.Hierarchy.DefaultLoggerFactory.LoggerImpl}) + 0x1cf bytes log4net.dll!log4net.Repository.Hierarchy.Hierarchy.GetLogger(string name = ".cctor", log4net.Repository.Hierarchy.ILoggerFactory factory = {log4net.Repository.Hierarchy.DefaultLoggerFactory}) + 0x12b bytes log4net.dll!log4net.Repository.Hierarchy.Hierarchy.GetLogger(string name = ".cctor") + 0x46 bytes log4net.dll!log4net.Core.LoggerManager.GetLogger(System.Reflection.Assembly repositoryAssembly = {System.Reflection.Assembly}, string name = ".cctor") + 0x94 bytes log4net.dll!log4net.LogManager.GetLogger(System.Reflection.Assembly repositoryAssembly = {System.Reflection.Assembly}, string name = ".cctor") + 0x1b bytes log4net.dll!log4net.LogManager.GetLogger(string name = ".cctor") + 0x1e bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Lib.Tracing.CELogger.CELogger(string name = ".cctor") + 0x20 bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Lib.Tracing.TraceManager.LoggerFactoryHelper.makeLogger(string name = ".cctor") + 0x35 bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Lib.Tracing.TraceManager.getLogger(string name = ".cctor") + 0x4a bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Infostore.Internal.AbstractSchedulableObject..cctor() + 0x23 bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Infostore.Internal.SchedulableInfoObject.SchedulableInfoObject() + 0xf bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Infostore.Internal.InfoObjects.newInfoObject(System.Object plgKey = ) + 0xbb bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Infostore.Internal.InfoObjects.continueUnpack(BusinessObjects.Enterprise.OcaFramework.Oca.InfoStore.info_wire_ob3[] wireObjs = {Length=0x1}) + 0x40a bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Infostore.Internal.InfoObjects.startUnpack(BusinessObjects.Enterprise.Security.Internal.ISecuritySession session = {BusinessObjects.Enterprise.Security.Internal.SecuritySession}, BusinessObjects.Enterprise.Infostore.IInfoStore infoStore = {BusinessObjects.Enterprise.Infostore.Internal.InfoStore}, BusinessObjects.Enterprise.OcaFramework.Oca.InfoStore.info_wire_ob3[] wireObjs = {Length=0x1}) + 0x9b bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Infostore.Internal.InfoStore.queryHelper(string query = "SELECT SI_MACHINE, SI_MACHINECHOICE from CI_INFOOBJECTS WHERE SI_ID=2762", BusinessObjects.Enterprise.Infostore.Internal.InfoObjects objs = {BusinessObjects.Enterprise.Infostore.Internal.InfoObjects}) + 0x149 bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Infostore.Internal.InfoStore.Query(string query = "SELECT SI_MACHINE, SI_MACHINECHOICE from CI_INFOOBJECTS WHERE SI_ID=2762") + 0x2f bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Ras21.RASConnection.initServerSpec(BusinessObjects.Enterprise.OcaFramework.ServerSpec serverSpec = {BusinessObjects.Enterprise.OcaFramework.ServerSpec}) + 0x30d bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Ras21.RASConnection.init(BusinessObjects.Enterprise.Ras21.IRASConnectionInitService i_initService = <undefined value>) + 0x422 bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Ras21.RASConnection.RASConnection(string i_sServerKind = "dpscacheFullClient", BusinessObjects.Enterprise.Ras21.Messages.GetConnection i_getConnection = {BusinessObjects.Enterprise.Ras21.Messages.GetConnection}, System.IO.Stream i_documentStream = <undefined value>, BusinessObjects.Enterprise.Ras21.IRASConnectionInitService i_initService = <undefined value>, BusinessObjects.Enterprise.Ras21.Serialization.IServerDeserializerFactory i_deserializerFactory = {BusinessObjects.Enterprise.Ras21.RASConnectionFactory.RASConnectionServerSerializationFactory}, BusinessObjects.Enterprise.Ras21.Serialization.IServerSerializerFactory i_serializerFactory = {BusinessObjects.Enterprise.Ras21.RASConnectionFactory.RASConnectionServerSerializationFactory}) + 0x18a bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Ras21.RASConnectionFactory.getRASConnection(string i_sServerKind = "CrystalEnterprise.FullClient", System.Globalization.CultureInfo i_locale = {System.Globalization.CultureInfo}, BusinessObjects.Enterprise.Security.Internal.ISecuritySession i_secSession = {BusinessObjects.Enterprise.Security.Internal.SecuritySession}, BusinessObjects.Enterprise.Ras21.Messages.GetConnection.DocumentId i_documentId = {BusinessObjects.Enterprise.Ras21.Messages.GetConnection.DocumentId}, System.IO.Stream i_documentStream = <undefined value>, BusinessObjects.Enterprise.Ras21.IRASConnectionInitService i_initService = <undefined value>) + 0x156 bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Ras21.RASConnectionFactory.getRASConnectionObjectId(string i_sServerKind = "CrystalEnterprise.FullClient", System.Globalization.CultureInfo i_locale = {System.Globalization.CultureInfo}, BusinessObjects.Enterprise.Security.Internal.ISecuritySession i_secSession = {BusinessObjects.Enterprise.Security.Internal.SecuritySession}, int i_nObjectId = 0xaca) + 0x108 bytes businessobjects.reportengine.fc.dll!BusinessObjects.ReportEngine.FC.ras21.XMLviaRAS21Encode.newSession(BusinessObjects.ReportEngine.FC.ras21.RAS21SessionID i_occaSession = {BusinessObjects.ReportEngine.FC.ras21.RAS21SessionID}, string i_sLocale = "en-US", int i_nDocId = 0xaca, string s_iConnID = "1") + 0x107 bytes businessobjects.reportengine.fc.dll!BusinessObjects.ReportEngine.FC.ras21.RAS21ReportEngineComAdapter.InitRAS21Connection(BusinessObjects.ReportEngine.FC.ras21.RAS21SessionID i_occaSession = {BusinessObjects.ReportEngine.FC.ras21.RAS21SessionID}, string i_sLocale = "", bool i_bNewDoc = false, int i_nDocId = 0xaca, string i_sConnID = "1") + 0x1d bytes businessobjects.reportengine.fc.dll!BusinessObjects.ReportEngine.FC.ras21.RAS21ReportEngineComAdapter.openDocument(BusinessObjects.ReportEngine.Internal.Utilities.Storage.IStorageManager storageManager = {BusinessObjects.ReportEngine.Internal.Utilities.Storage.ClusterStorageManager}, string sLocale = "", int docID = 0xaca) + 0xde bytes businessobjects.reportengine.fc.dll!BusinessObjects.ReportEngine.FC.ReportEngineImpl.OpenDocument(int docID = 0xaca) + 0x107 bytes > businessobjectinteroperation.dll!BusinessObjectsInteroperation.BusinessObjectsInterop.GetBinaryReportByName(string NameOfTheReport = "DO_Raport", System.IO.Stream StreamForDataBeWritten = {System.Web.HttpResponseStream}, BusinessObjectsInteroperation.BOConfigs BOCfg = {BusinessObjectsInteroperation.BOConfigs}, BusinessObjects.ReportEngine.OutputFormatType OutputFormat = Pdf, System.Collections.Hashtable PromptValues = {Count=0x3}) Line 80 + 0x22 bytes C#

7.5: strange behaviour on data entry schedule

Similar Messages

Maybe you are looking for