7.6.130.0 or 8.0 ?

Hi Wireless Experts,
We have 5508 WLCs running 7.6.120.0 since July 2014. No major issue so far but some inconvenience due to some little bug.
Just noticed that 7.6.120.0 is not available to download on Cisco webiste any more because some critical bugs were found.
It made us a bit nervous, even though there is only a very small portion of our environment might be impacted by these bugs.
May I please ask your opinion, as of today, which version is stable enough and better, 7.6.130.0 or 8.0 (8.0.115.0 / 8.0.110.0 / 8.0.100.0)?
Thanks,
Cedar

I would upgrade to 7.6.130.0 (after a proper bug scrub w/ your environment and used features in mind, of course). A seasoned veteran once advised me to avoid upgrading to any .0 release from Cisco. I've mostly followed that rule and been happier for it.

Similar Messages

IPhone limited to 130 apps at a time! 6,200 apps available in app store

The i phone is limited to nine app screen i notice this when i try to move on to a tenth screen and it would not let me and also when you download a app after all 9 screen are full the app dose not show up but the app store says it is installed apple needs to expand the amount of screen allowed. you then end up having to delete 2 apps download 1 app in able to make the invisible app appear you have to try this one out for your self so you get a better idea of what i mean so it looks like we are limited to 144 apps per iPhone subtract 14 apps that come default on the screen not including the 4 that are on the bar below you are left with 130 apps that can be downloaded and use at a time per i phone that ***** there are over 6,200 apps available in the app store as i type this to you and apple is limiting me to only carry 130 at a time there is somthing worng with this and i think somthing should be done!

No acutally what that means is most people like myself have to install 30 apps just to get the iphone to do half the things it should have done out of the box. Sure some are wants but most are "need" in order for it to do the things my old palm treo 600 could do, and still there's not copy and past and no video. On top of that they have a stupid 130 limit. I'd love to hear why that is.

Issue in /130 & /416

Dear Folks,
Here is a scenario,
I have created a wage type , the amount of this wage type is add to /130 & /416 . I have written a pcr and the amount of same is adding in /130 &/ 416 but while exeucting the payroll for next month, amount stored in /130 & /416 of this wage type is not reflecting (adding)
Anyone please guide me further.
Regards,

Thanks for your respnose!
I am using It15 for making payment of Grautity with a logic that the amount of this wage type will add in /130 for exemption. But in current month it is working fine but while executing payroll for next run the amount stored in /130 is not reflecting hence impact also happened /416.
Do correct me where i did mistake, my pcr is as follows:
gratutiy (wage type)
ELIMI *    Elim.time period ID
ADDWT gratutiy OT   Output table
ADDWT /416 OT   Output table
ADDWT /130 OT   Output table
AMT?999999 Comparison
    <
      ADDWTI/130 IT   Input table
      ADDWT /4E8 OT   Output table
    =
      ADDWTI/130 IT   Input table
      ADDWT /4E8 OT   Output table
    >
      ELIMI *    Elim.time period I
      AMT=999999 Set
      ADDWT /4E8 OT   Output table
      ADDWTI/130 IT   Input table

How to connect a plasma panel digitally to Qosmio F10-130

Hi,
I just orderer the F10-130 and I would like to connect my plasma panel with a digital video signal. The monitor has a DVI input, and the F10 has a so-called "D-Video out" interface that I've never seen before. What's the best way to connect the two devices? I know that VGA Sub-D or S-Video should work, but IMHO this is not state of the art. Does an adapter D-Video to DVI exist?
Regards,
Marsu
[Edited by: admin on 14-Mar-05 21:12]

Hi marsu
D connector port on Qosmio you can connect to SCART port on TV. The cable is provided with Qosmio notebook. Sorry but I think there is no possibility to connect it to DVI port on your TV.
Only thing that you can do is to ask some experts in electronic store if there is some solution for this issue.

Satellite U300-130 - TosBtMng has stopped working after Nokia PC Suite installation

I've got the same problem too... with Toshiba Satellite U300-130.
Bluetooth had worked pretty well before I installed Nokia PC Suite for my mobile on my PC (the newest version 7.1.26.0 from website).
To be correct, at first I even managed to maintain a Bluetooth connection between PC and Nokia and ran syncronisation of contacts. I made several attempts but each time syncronisation run ended with message "PC coudn't get answer from your Nokia".
After rebooting, my PC went crazy and started issuing message "TosBtMng has stopped working" and it restarted every time I ask it to close.
Installation of new version of BT Stack (6.40) didn't fix this error.
Please help

Hi there
I answered an existing thread with the same problem, but no-one can help apparently.
Anyway,,, I can at least help you with getting rid of the looping setup. You need to rename the directory with the Toshiba bluetooth stack.
I also have Nokia syncing and it worked fine until recently. - I have to say I think the problem relates to a Windows auto upgrade.
How to solve this is a different matter. At this moment I have given up. The Toshiba bluetooth stack disabled.

Upgrade two WLC 5508 with HA SSO from 7.5.102.0 to 7.6.130.0 combined with FUS 1.9

The running config is:
- Two WLC5508's in HA SSO setup running version 7.5.102.0
- about 130 x 2602i APs
I need to upgrade to 7.6.130.0 using the pre-download feature to minimize the network downtime.
Is it possible to transfer the 7.6 to the controllers and pre-download 7.6 to all APs, then do the FUS 1.9 upgrade and finally start the actual controller upgrade to 7.6.
So the steps would be:
1. Transfer 7.6 image to primary controller (do not reboot!), so still running 7.4 as active image.
2. Start pre-download of 7.6 image to all APs and wait till all APs have the new image (do not know how long it takes for 130 APs).
3. Upgrade both controllers with FUS 1.9 (HA should upgrade both controllers automatically) (takes about 45 minutes?)
4. Make 7.6 image the active/primary image on controllers and APs and reset controllers.
If the steps above will not work, I would need to upgrade FUS 1.9 which means 1 hour downtime and then start the pre-download to all APs. The pre-download can take a long time I heard, so I need to wait and wait before I can start the 7.6 upgrade, which means another 1 hour downtime.
This way I need two maintenance windows instead of one. So would it be possible to combine the pre-download and FUS?
Regards,
Bjorn

>Do I need to upgrade the FUS 1.9 before the 7.6 image or can I do the FUS afterwards? If I can do it afterwards, I can do the upgrades in the same maintenance window. This way I can start the pre-download the day before, so I am pretty sure the APs have the image at the time of the maintenance window.
>I cannot find any remarks about the required order of installation (FUS -> image or image -> FUS).
Release Notes for Wireless LAN Controller Field Upgrade Software for Release 1.9.0.0 - p2 :
* This release of the Field Upgrade Software is applicable to CISCO WLC's that are installed with the controller software release 6.0 and later.
So strict reading implies that you have to run 7.6 first.
M.

Qosmio X300 -130 and Vista 64-bit - On screen Display doesn't work

Hi there,
I recently bought a Qosmio X300-130 notebook which shipped with Vista Home Premium.
The problem was that I could not get onto our domain at the office. So installed Vista Business 64-bit. I found all of the drivers online and everything works perfect except for my onscreen display (When changing the volume, contrast,etc). Can anyone please tell me what software or driver did I forget and where can I find it?
Regards

Hello
I really don't know what is wrong there but here is the Vista 64-bit installations order for your notebook model:
Windows Vista
Intel(R) Chipset Module V8.7.0.1007
Intel(R) Turbo Memory Driver(Intel iMSM Driver) V1.6.0.1034
nVidia Display Driver V175.80
Realtek Audio Driver V6.0.1.5608
Realtek Network Driver V6.205.403.2008
Alps Touch Pad Driver V7.102.302.101
Synaptics Touch Pad Driver V11.1.1.0
Jmicron CardBus Controler V1.00.13.03
TOSHIBA Software Modem V2.1.87(SM2187ALS04)
SliconLab Modem Driver V6.12.14.03
WLAN driver
Chicony Camera Software V1.7.193.0508
Bluetooth Stack for Windows by Toshiba V6.10.07.2T
CIR Port Driver V2.5.0.0
TOSHIBA Value Added Package V1.1.19_64
TOSHIBA Hardware Setup Utility V1.57.0.3C
TOSHIBA Supervisor Password V1.57.0.2C
Flash Cards Support Utility V1.57.0.2C
TOSHIBA SD Memory Utilities V1.9.1.9
Authentec AES1610 Fingerprint Utility V2.1.11.0
TOSHIBA ConfigFree V7.2.16
TOSHIBA WPS Library V1.0.0.7
TOSHIBA Assist V3.00.04
TOSHIBA Speech System V1.00.2515
TOSHIBA Extended Tiles for Windows Mobility Center V1.01
Dolby Control Center V1.1.0406
TOSHIBA Remote Control Manager V2.4.0.3
CD/DVD Drive Acoustic Silencer V3.01.03
TOSHIBA DVD PLAYER V1.31.11
TOSHIBA TRS Driver V4.1.2007.1115
HDMI Control Manager V1.7.0.5.64
TOSHBA Face Recognition(SmartFaceV) V2.0.2.64
So if you install your Vista and all Toshiba stuff following this installations order I believe everything should work properly.
If not I don't know what can be the problem. Maybe you then have just bad luck. ;)
Good luck!

I have about 130 gigs of movies on my iTunes and was wondering if I can just put them on my backup hard drive and remove them from my main computer to free up the space

I have about 130 gigs of movies on my iTunes and was wondering if I can just put them on my backup hard drive and remove them from my main computer to free up the space.

I haven't done this with an external drive, but I would imagine it works the same way as if you have multiple internal drives. Also hopefully it works with less headache in OSX than in windows.
Anyway, move all your music over to your external, and then go into itunes -> preferences -> advanced -> iTunes media folder location. Navigate to your drive, and pick the folder you want. Ensure that your folders are set up like they are in your ~/Music/iTunes folder, or wherever your iTunes is currently pointing. Then quit and restart itunes. If your music doesn't show up, try dragging your music folder from your external onto itunes, and it will hopefully update your library.xml.
As far as Jerry's problem goes, you could try adding another music folder to your library.xml, but I really have no idea whether this will work or not. If you want to give it a try (can't promise you won't corrupt your library.xml, so make a copy beforehand) you can find the music folder xml element right near the top of the xml file (open it with textedit/textmate/whatever text editor you want (NOT WORD)). Curious to know if this works, and if it doesn't I have other ideas so let me know.

Airport Extreme speed limit to 130 Mbit

Is it normal that the maximum speed of the Airport Extreme is always limited to 130 Mbit when you've configued it as 802.11b/g compatible? I've use the Network Utility to check the Link Speed.
I need the 802.11 g mode because sometimes I need to connect some older PC's.
Also before mine network was a wired when. The link speed was 100Mbit. When I copied a file from a Mac to another Mac I got have some transfer speed about 8 a 9 MB/s. (I use the iStat widget to check this).
At this moment mine network has become a wireless one. The link speed is 130Mbit which is higher then the wired network. Although when I'm copying a file from one Mac to another one mine speed transfer is maximum 4 MB/s.
This is half the speed as before.
Is this behaviour normal? Of-course I didn't expect the same results as with the wired network but at least I expected some better results.

I have also noticed that when you setup the Airport Extreme to only the 'n' network at 5GHz you will get a maximum speed transfer of 270Mbit.
But I've find it very strange that when you select the network for b/g/n that you will always be limited to a maximum transfer of 130Mbit. I find it normal that the speed of the network will slow down at the moment that there is a connection busy with a device that only supports b/g.
Most people do need this compatibility. Game-consoles, smartphones, printers and so on. 90% of the time those devices are not connected with the network.
Whenever you setup this mode of compatibly you will have always a slower network then the Airport Extreme is capable of doing. Of-course you can connect another router when setup for 'n' 5GHz and the other setup for b/g. But this isn't the way to go...

Satellite A20-130: SD R2412 cannot read DVDs burnt in certain optical drives

Hi,
I've got a Satellite A20-130 laptop, running WinXP and Ununtu Dapper in a dual partition. My 2nd laptop is not Toshiba one. When I burned DVDs (DVD+R) with my non-Toshiba laptop and played them in my Satellite it all worked fine.
However, when I bought a new optical drive for my 2nd laptop my Toshiba suddenly stopped playing the DVDs burnt in this new optical drive(I was using exactly the same disc brand and format as before-- DVD+R). I tried the old DVDs (the ones burnt in the laptop before the optical drive hardware was upgraded) and they can still by read perfectly fine.
This problem applies to both Ubuntu and WinXP. Support from 2nd laptop says this sounds like a firmware problem with my Toshiba. I updated the driver for my SD R2412 Toshiba optical drive (which, according to the file manual, seems to fix a DVD-Ram compatibility issue). Now the drive occasionally reads some of the new burned DVDs (after making loads of noise and waiting for ages), but more often than not I get an error message saying the device cannot be read because the format is incorrect or the device needs to be formatted.
This non-Toshiba laptop reads the DVDs it burns using the upgraded optical drive perfectly fine.

Hi
Satellite A20 is pretty old notebook model and after intensive usage it can be that drive is more sensitive. If all this happen occasionally there is no simply explanation why this happen.
I know it is pretty annoying but I do not see any magic solution. At the end you must test it with brand new drive.

I tried to manually clear my Time Machine back up drive (a La Cie). But now the Trash is filled with files (over 130,000) and it doesn't seem to want to trash them - how do I get rid of them now in a quicker way?

I tried to manually clear my Time Machine back up drive (a La Cie) of some of the older backups. But now the Trash is filled with files (over 130,000) and it doesn't seem to want to trash them - it's taking forever!! how do I get rid of them now in a quicker way?

dear Sue
i've tried the alt solution to empty trash but it does not work
I still got the -8003 error
for emptying time machine backups that i foolishly put in the trash
i've also tried this solution using terminal and it did not work either
http://www.imore.com/how-force-empty-trash-your-mac-using-terminal
any help you might offer would be greatly appreciated
i am using a 24 inch iMac
OSX 10.6.8
Message was edited by: summer_laughter

Time machine: I am backing up 130 gigs but on the External HD it shows 13

The initial backup with time machine says I am backing up 130 gigs but then it stops at 13 gigs and thinks its done. Is it just really compressed? The volume of the mac hard drive doesnt match the backup volume. Any suggestions?

Yes I'd recommend going to the Time Machine forum and first reading TM FAQ's and TM Troubleshooting. You can find those at:
http://discussions.apple.com/forum.jspa?forumID=1342
Because TM is part of OS X you need to look in the Snow Leopard forums. Not that intuitive I know but it's the best way to keep it organized.
Roger

NVIDIA GeForce GT 130 Kernel Panics/Freezes in Lion & late Snow Leopard

I've found some other reports of these freezes scattered about the forums, but usually other people come in and post something about unrelated video cards. So this thread is specific to NVIDIA GeForce GT 130 running OS X Lion (10.7-10.7.3), to avoid confusion and cross-polination of different issues.
Hardware Overview:
Model Name:          iMac
Model Identifier:          iMac9,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          6 MB
Memory:          8 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          IM91.008D.B08
SMC Version (system):          1.37f3
NVIDIA GeForce GT 130:
Chipset Model:          NVIDIA GeForce GT 130
Type:          GPU
Bus:          PCIe
PCIe Lane Width:          x16
VRAM (Total):          512 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x062e
Revision ID:          0x00a1
ROM Revision:          3370
Since upgrading to Lion I have had many issues with crashes and kernel panics characterized by the following symptoms, listed here in detail so that people can find them when they search:
Pixellation - colored pixels appear in different areas of the screen, in seemingly random bunches.
Mosaics - squares appear redrawn in the wrong part of the screen. Sometimes these squares are large, other times tiny.
Recovery - sometimes the system recovers once it starts doing these. Other times it just keeps going until it freezes/panics.
Kernel Panics - I've only had the "grey screen" appear once or twice. Usually there is a complete system lockup before this can happen, and I have to reboot the system manually.
Some solutions/attempts to solve:
Turn off Energy Saving - This is horrible for the monitor and can lead to burn-in, but I found that many of my crashes occured when the system was trying to recover from "screen sleep". So now I run a screen saver instead, which doesn't seem to trigger it as much.
Screen Saver - Sometimes I can "refresh" the system by turning on the screen saver and then coming back. Other times, this doesn't work and the pixellation/mosaic remains. Sometimes I can't even initialize the screen saver at all (in which case a total freeze usually occurs right after).
Rebooting - seems to clear things up for a while, but inevitably, the problem resurfaces.
Running Windows - Not really a solution, but I have had absolutely no issues with this behavior while running Windows 7 on this same machine (under Bootcamp).
Downgrading to Snow Leopard - I have not attempted this, but I've read others say that their crashes went away when they did. I would like some more concrete evidence on this if anyone has it.
My diagnosis so far:
OS X Lion's NVIDIA driver kernel extensions (kexts) seem to be faulty with this GPU. The Windows drivers for this GPU work better on Apple's own hardware than OS X Lion's. Anectodal evidence indicates that Snow Leopard's drivers (at least up to 10.6.3 – more confirmation needed) do not display this issue. I can confirm that this never occurred in Snow Leopard until Lion was released and I upgraded to it.
My request for help and information:
If you are running this GPU (GeForce GT 130) and OS X Lion, please contribute to this thread offering any solutions you may have or, at the very least, listing your hardware and GPU profile.
If you can, post crash logs so that we can compare common issues (NVDA Resman seems to be a huge recurring kext in the crash logs, for instance).
Post screen shots or pictures taken of the pixellation (colored pixels) and mosaic (squares drawn in the wrong place) phenomenon, so we can build a body of evidence regarding this issue. I will continue to update this thread with the same.
I feel Apple has ignored these issues for far too long, and required too many people to simply purchase new computers and new GPUs. If we can build a solid body of evidence regarding this specific issue, it will be a thread that Apple Support can be referred to.

Crashed again, this time while running screen saver. Here's the log:
Interval Since Last Panic Report: 258975 sec
Panics Since Last Report:          1
Anonymous UUID:                    8A9BDB66-541D-4132-8BDD-D171D358B321
Thu May 10 03:48:23 2012
panic(cpu 1 caller 0xffffff7f8092a907): NVRM[0/2:0:0]: Read Error 0x0061002c: CFG 0x00000000 0x00000000 0x00000000, BAR0 0xd2000000 0xffffff80f3175000 0x094700a1, D0, P3/4
Backtrace (CPU 1), Frame : Return Address
0xffffff80f179bc80 : 0xffffff8000220702
0xffffff80f179bd00 : 0xffffff7f8092a907
0xffffff80f179bd90 : 0xffffff7f80a1aa64
0xffffff80f179bde0 : 0xffffff7f80c1e4dc
0xffffff80f179be00 : 0xffffff7f809e3673
0xffffff80f179be20 : 0xffffff7f80a8ba0a
0xffffff80f179be90 : 0xffffff7f809177d6
0xffffff80f179bf40 : 0xffffff7f808d143e
0xffffff80f179bf70 : 0xffffff800023db2c
0xffffff80f179bfb0 : 0xffffff8000820057
      Kernel Extensions in backtrace:
         com.apple.NVDAResman(7.1.8)[94BA87BA-B128-3310-9860-98EC67AB7FAF]@0xffffff7f808 ca000->0xffffff7f80ba3fff
            dependency: com.apple.iokit.IOPCIFamily(2.6.8)[F63D4ABE-42DA-33EF-BADD-3415B0CB0179]@0xffff ff7f80846000
            dependency: com.apple.iokit.IONDRVSupport(2.3.2)[4B3F84DC-18B3-3897-BC56-4E3940878047]@0xff ffff7f808b8000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[FE536983-1897-3D6B-965E-24B5A67080DA]@0 xffffff7f80880000
         com.apple.nvidia.nv50hal(7.1.8)[7596DB8C-AE9D-3C87-B11A-0ED8F940CAF8]@0xffffff7 f80ba4000->0xffffff7f80ec5fff
            dependency: com.apple.NVDAResman(7.1.8)[94BA87BA-B128-3310-9860-98EC67AB7FAF]@0xffffff7f808 ca000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11D50b
Kernel version:
Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
Kernel UUID: 7B6546C7-70E8-3ED8-A6C3-C927E4D3D0D6
System model name: iMac9,1 (Mac-F2218FC8)
System uptime in nanoseconds: 137075074753775
last loaded kext at 39719236478: com.apple.driver.AppleHWSensor          1.9.4d0 (addr 0xffffff7f81e72000, size 28672)
loaded kexts:
com.rogueamoeba.HermesAudio          3.0.2
com.orderedbytes.driver.ControllerMateFamily          4.4.3
com.attotech.driver.ATTOiSCSI          3.4.1b1
com.orderedbytes.driver.CMUSBDevices          4.4.3
com.TrustedData.driver.VendorSpecificType00          1.5.0
at.obdev.nke.LittleSnitch          2.4.0
com.apple.driver.AppleHWSensor          1.9.4d0
com.apple.filesystems.autofs          3.0
com.apple.filesystems.ntfs          3.10
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AppleMCCSControl          1.0.26
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AppleHDA          2.1.7f9
com.apple.driver.AppleMikeyDriver          2.1.7f9
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AGPM          100.12.42
com.apple.GeForce          7.1.8
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.5d4
com.apple.driver.AppleMuxControl          3.0.16
com.apple.driver.AppleBacklight          170.1.9
com.apple.driver.AppleLPC          1.5.3
com.apple.driver.AppleIRController          312
com.apple.driver.AppleFireWireStorage          3.0.1
com.apple.driver.initioFWBridge          3.0.1
com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit          3.0.1
com.apple.driver.LSI_FW_500          3.0.1
com.apple.driver.Oxford_Semi          3.0.1
com.apple.driver.StorageLynx          3.0.1
com.apple.iokit.SCSITaskUserClient          3.0.3
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.iokit.IOAHCIBlockStorage          2.0.1
com.apple.driver.AppleAHCIPort          2.2.0
com.apple.driver.AppleFWOHCI          4.8.9
com.apple.driver.AirPort.Brcm4331          513.20.19
com.apple.driver.AppleRTC          1.4
com.apple.driver.AppleEFINVRAM          1.5.0
com.apple.driver.AppleUSBHub          4.5.0
com.apple.nvenet          2.0.17
com.apple.driver.AppleUSBEHCI          4.5.8
com.apple.driver.AppleUSBOHCI          4.4.5
com.apple.driver.AppleHPET          1.6
com.apple.driver.AppleACPIButtons          1.4
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.4
com.apple.driver.AppleAPIC          1.5
com.apple.driver.AppleIntelCPUPowerManagementClient          167.3.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.1
com.apple.driver.AppleIntelCPUPowerManagement          167.3.0
com.apple.kext.triggers          1.0
com.apple.driver.AppleHDAHardwareConfigDriver          2.1.7f9
com.apple.driver.DspFuncLib          2.1.7f9
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.nvidia.nv50hal          7.1.8
com.apple.NVDAResman          7.1.8
com.apple.iokit.IOFireWireIP          2.2.4
com.apple.driver.AppleUSBAudio          2.8.2f5
com.apple.iokit.IOSurface          80.0
com.apple.iokit.IOBluetoothSerialManager          4.0.3f12
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.iokit.IOAVBFamily          1.0.0d22
com.apple.iokit.IOEthernetAVBController          1.0.0d5
com.apple.iokit.IOAudioFamily          1.8.6fc6
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.ApplePolicyControl          3.0.16
com.apple.driver.IOPlatformPluginFamily          4.7.5d4
com.apple.driver.AppleHDAController          2.1.7f9
com.apple.iokit.IOHDAFamily          2.1.7f9
com.apple.driver.AppleSMC          3.1.1d8
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleGraphicsControl          3.0.16
com.apple.driver.AppleBacklightExpert          1.0.3
com.apple.iokit.IONDRVSupport          2.3.2
com.apple.iokit.IOGraphicsFamily          2.3.2
com.apple.driver.AppleFileSystemDriver          13
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.3f12
com.apple.driver.AppleUSBBluetoothHCIController          4.0.3f12
com.apple.iokit.IOBluetoothFamily          4.0.3f12
com.apple.iokit.IOUSBHIDDriver          4.4.5
com.apple.driver.AppleUSBMergeNub          4.5.3
com.apple.iokit.IOSCSIBlockCommandsDevice          3.0.3
com.apple.iokit.IOFireWireSerialBusProtocolTransport          2.1.0
com.apple.iokit.IOFireWireSBP2          4.2.0
com.apple.iokit.IOUSBMassStorageClass          3.0.1
com.apple.driver.AppleUSBComposite          4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.0.3
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.7
com.apple.iokit.IOCDStorageFamily          1.7
com.apple.iokit.IOAHCISerialATAPI          2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.0.3
com.apple.driver.XsanFilter          403
com.apple.iokit.IOAHCIFamily          2.0.7
com.apple.iokit.IOFireWireFamily          4.4.5
com.apple.iokit.IO80211Family          412.2
com.apple.iokit.IOUSBUserClient          4.5.8
com.apple.iokit.IONetworkingFamily          2.0
com.apple.iokit.IOUSBFamily          4.5.8
com.apple.driver.NVSMU          2.2.9
com.apple.driver.AppleEFIRuntime          1.5.0
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.3
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          331.3
com.apple.iokit.IOStorageFamily          1.7
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.4
com.apple.iokit.IOPCIFamily          2.6.8
com.apple.iokit.IOACPIFamily          1.4

24" iMac summer 2008. CPU fan runs at highest speed, some times goes to "sleep" mode. t' is about 35'- 42'C. Run hardware test: 4sns/1/40000000:tlop-130.000, next time 4sns/1/40000000:tlop-128.000 errors. Reinstalled all softwere. Nothing changed.

24" iMac summer 2008. CPU fan runs at highest speed, some times goes to "sleep" mode. CPU t' is about 35'- 42'C. Run hardware test: 4sns/1/40000000:tlop-130.000, next time 4sns/1/40000000:tlop-128.000 errors. Tried SMC, NVRAM, PRAM. Reinstalled all softwere. Nothing changed.

I suspect you have hardware problem with a fan sensor. Doing a software install will not help the machine needs to be taken in for service. If you run Apple Hardware Test in Extended Mode it should reveal the error code. If it does not then run AHT an additional 2-3 times to be sure in Extended Mode. Each pass will take about 30-60 minutes.

Where can I buy Satellite P500-130?

I have spent the WHOLE day trying to find a distributor who sells the Satellite P500-130 in Germany ( or with German keyboard). So far no luck.
Does anyone know if/where I can buy a new one or if it is an older model, what the follow up model is?
Thanks

Hey,
Have you already checked some popular online shops like Amazon? Usually they have a large choice of notebooks.
If you cant find it you can also ask an Toshiba authorized service provider. They also sell notebooks. Just give them a call or write an email.
Perhaps Satellite P500-130 is not on the market anymore and there is another similar configuration on the market

How can I get rid of 130+ unread texts that are actually read?

My iPhone isn't recognizing when I have read a text message. It's up to 130 now and it's taking up all the storage on my phone. Everything is running slow and I have tried restarting and resetting my phone, closing all the apps I had open before doing either of these. Idk what else to do but now my phone isn't even receiving or sending messages consistently. It's an iPhone 4 and I have had it updated to iOS7 for a few weeks now.

in yoru inbox click "edit" - click "mark all" - and click mark read
LN

7.6.130.0 or 8.0 ?

Similar Messages

Maybe you are looking for