7.7.07.30 not available for Solaris x86_64?

Build 7.7.07.30 is available for Linux x86_64 an Linux IA64 but not for other operating systems. Is there a reason for this?
Markus

Hi Markus,
no special reason for that apart from this: we had problems in tests on other platforms and this version was urgently requested especially on Linux and Windows where the tests were fine. So we decided to make this version available only on these platforms. The corrections/changes will be made available on all platforms with 7.7.07.32 which is currently in delivery.
Regards,
Steffen

Similar Messages

Workshop (WebLogic 10.2 MP1) not available for Solaris 10 SPARC 64 bit?

Hi All,
When Workshop for WebLogic 10.2 MP1 will be available for Solaris 10 SPARC 64 bit.
I could find "WebLogic 10.2 MP1 for Solaris 10 SPARC 32 bit" but not for SPARC 64 bit!!
otherwise guide me to download page.
Thanks and Regards
Arunachalam.C
Edited by: arungoin on Feb 16, 2011 4:55 PM

I found by issue "mount -v" that our disk slices are
UFS type. So we don't need apply patch 5257399,
right? Please confirm. Thanks!!!For your information, you are asking the user community to confirm, not Oracle. Some (many?) of us are not employed by Oracle.
Therefore, the only answers you can get are from 'friends'. Nothing would be official and Oracle (and Oracle Support) would not be legally responsible.
Your safest bet would be to escalate the request wityh Oracle Support.

Will Instant Client 10.2.0.1 be available for Solaris 32-bit (SPARC)?

The latest Instant Client release is currently not available for Solaris Sparc 32-bit.
Does anyone know when it will be available?
Thank you.

It is available now.

Oracle SOA Suite is also available for Solaris, HP-UX, IBM

Oracle SOA Suite is also available for Solaris, HP-UX, IBM
http://www.oracle.com/technology/software/products/ias/htdocs/101310.html

Hi-
You can use below manual installation proceeds as follows :
Step 1. Download a setup for Windows and run it on a Windows machine.
Step 2. Once the setup is finished, FTP all the following files and folders from your Windows machine to you Sun Solaris server :
the entire 'bin' folder (excepting the '.bat' files) - ASCII transfer mode
the entire 'lib' folder - BINARY transfer mode
the entire 'drivers' folder - BINARY transfer mode
Step 3. Once you have transferred all the files, do not forget to configure the odiparams.sh file according to your environment. Also add the appropriate files, used by ODI to connect to your technologies, to the 'drivers' folder.
Does it helpful?
Thanks,
Saravanan Rajavel

Nested virtualization not available in Solaris 11.2

Hello!
Anybody know why virtual hardware virtualization is not available for my Solaris 11.2 guest?
I want to be able to use Solaris kernel zones.
Host environment:
   SuperMicro A1SRM-2758F, 32GB RAM
   ESXi-5.5 (build 2302651)
I know the CPU (Atom C2758) supports both VT-x and EPT that is required for 64bit virtualization nesting
And browsing to:
   https://myip/mob/?moid=ha-host&doPath=capability
Shows me that the (unsupported) feature is available:
   nestedHVSupported
boolean
true
I have created a VM with vHardware vmx-10, selected 'Expose hardware assisted virtualization to the guest OS' and installed Solaris-11.2 as a guest.
I have also checked that 'vhv.enable = "TRUE" ' is to be found in the vmx file.
But from the Solaris guest Kernel zone are not available:
# virtinfo
NAME            CLASS
vmware          current
non-global-zone supported
# uname -a
SunOS global1 5.11 11.2 i86pc i386 i86pc
Anybody have any ideas why this is not available. Worked fine in VMware Fusion.
Best regards,
- Morten Green Hermansen, Fanitas

Hello jmattson!
I tried to add:
vvt.etmt.uc = "TRUE"
to the vmx file and according to the log it got picked up:
2015-03-31T20:03:40.790Z| vmx| I120: DICT
featMask.vm.hv.capable = Min:1
2015-03-31T20:03:40.790Z| vmx| I120: DICT
vhv.enable = TRUE
2015-03-31T20:03:40.790Z| vmx| I120: DICT
vvt.etmt.uc = TRUE
2015-03-31T20:03:40.790Z| vmx| I120: DICT sched.scsi0:4.throughputCap = off
2015-03-31T20:03:40.790Z| vmx| I120: DICT sched.scsi1:3.throughputCap = off
But Solaris will still not support kernel zones:
# virtinfo
NAME            CLASS
vmware          current
non-global-zone supported
Will I then need to upgrade to ESXi-6 - and downgrade to the Web Client :'( for this to work?
Best regards and thank you SO much for your help!
- Morten Green Hermansen, Fanitas

New DSO data fields are not available for transformations in the upwardflow

Hello,
There are data flow from
many source DSOs -> Target DSO -> Final DSO.
Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
now new fields are added to the target DSO, final DSO and one of the source DSO.
When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
Have anyone faced such a problem?
any solutions to this?
- I cannot delete all the other transformations as this is too much work to do and there is no time for it.
Regards
Kannan

We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

SharePoint 2013: A web analytics report is not available for this site.

Hello,
I have SharePoint Server 2013 and the enable usage data collection is enabled. There is usage logs and data being generated, but SharePoint says there is not data available.
A web analytics report is not available for this site. Usage processing may be disabled on this server or the usage data forthis site has
not been processed yet.
What can I do?
Thanks,
Paul
Paul

hi,
Web Analytics is now part of the 2013 Search.
You can refer the below links, :
http://blogs.msdn.com/b/chandru/archive/2013/08/31/sharepoint-2013-web-analytics-report-where-is-it.aspx
http://www.collabshow.com/2013/05/23/sharepoint-2013-analytics-a-big-step-backward/
http://usamawahabkhan.blogspot.com/2013/06/sharepoint-2013-analytics-features-how.html
if you wanna use API, there is a blog,which talk about the same:
retrieve Search Analytics Reports
using SharePoint 2013 API:
http://radutut.wordpress.com/2013/01/27/how-to-get-search-analytics-reports-programmatically-in-sharepoint-2013/

Problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
If iPhoto is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
http://www.apple.com/support/mac/app-store/contact/

Item is not available for reference to Excise Invoice, Deselect Item OK!

Hai,
I am doing a Sub contracting scenario, in which the excise is applicable to main material, i have maintained condition records, captured excise But while doing GRN i am getting Item is not available for reference to Excise Invoice, Deselect Item OK!
Message no. 4F279
above errror
Plz solve my problem

Whether you tested case in development server ???
Are you sure SAP Note applies to our version & support package level ?

MIGO-Capturing problem-Item is not available for Excise invoice,deselect th

Hi Gurus
while doing MIGO and part 1 posting am getting following error
MIGO-Capturing problem-Item is not available for Excise invoice,deselect the item
kindly help in this
Maruthi

hi
check all settings in J1ID
or
in po did u got ur all values correctly for excise cess and hcess
if yes then check ur vendor excise details in j1id
if above setting are done properly then check ur CIN setting in spro>log gen>tax on goods movement >india>account determination >specify excise acct as per transaction/specify G/L acct as per transaction
regards
kunal

I have Firefox 5.0.1, and a theme I want to download says that it works with Firefox 4.0b9pre - 7.0a1, but at the top it says that it is not available for my platform. What do I do?

I just downloaded Firefox 5.0.1, and one of the themes I want to download and try out says that it works with Firefox 4.0b9pre - 7.0a1. At the top, though, it says that the theme is not available for my platform. It has happened with some other themes as well, but I didn't check what versions they work with. I don't know what this means or what to do about it. The theme is at this link: https://addons.mozilla.org/z/en-US/firefox/addon/bloomind-ft-deepdark-2/

It says:
<blockquote>"Bloomind FT DeepDark 2" is a theme that has been created to transform the look of Firefox 4 for Windows users. It has been specially designed for Seven, but rendering is relatively accurate on XP and Linux (I can t test it on MAC, but for those who would like to try it anyway on that platform, you can force download and install it).</blockquote>
So try to save that file via the right-click context menu.
*http://kb.mozillazine.org/Themes

I can't update my iPhoto. "Update is not available for this Apple ID".

Updating my iPhoto has always been a problem. When I try, I get the error of: "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
This is the only apple ID I have ever owned, and now that I updated my Mac with the new software, I can't even OPEN iPhoto anymore. Now I can't view any of my photos and I am not a happy camper..
How can I fix this problem?????
Thanks in Advance!

Contact App Store support. There's a link on the right hand side of the App Store Window. They're the only ones who can sort out account issues.

This email address is not available for use as an Apple ID

hi
i had two apple accounts
and just wanted to change the primary email address for the both with each other
when i changed the first one my old email cant be used with other account then i tried replacing my old email it doesnt replace it says
This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.
please help me

Yes, I am having the same problem. When I called apple they said that things were "tied up somehow" with another account that has a do different birthday than me. Uuuuuhh? So that means someone else can log in?... I have a feeling there is a big vulnerability with the three login options, just like with the current and past password retrieval. Apple had only suggested that I delete my current set up on my serviced and make a new ID and email.
I Just got a new email and made a new Apple ID account For now. I was hoping the email would work itself out. I assumed If I could make sure everything was verified, not associated with another account, and try to get rid of the alternate id and second email option also used to sign in (seen in Apple ID management) that could possibly be construed or mixed up with something else that it would eventually free up and become "available" again. Unfortunately im still waiting In hopes in just needs to recognize the email isn't associated with anything.
I have had a few major concerns with apple products lately especially with security. My iPhone 4s was hacked too. Some ******* was listening/recording and when I hooked to Internet he sent out the recorded portion that was available. Talk about ****** up.

How to delete old account, I can't log in due to - This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.

How to delete old account, I can't log in due to error - This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.

All good, I loved with AppStore and now everything seems to be back to normal.

This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.

I want to change my apple id but get the message "This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.". I try to log a call with apple support and I get a message like "cannot schedule a call". That leaves me out of options. Any ideas?

Hi billfromwandering,
I'm sorry to hear you are having these issues changing your Apple ID. It is correct that if an email address has been used previously for an Apple ID, it can not be used for a different Apple ID, as noted in this article:
In most cases, your Apple ID is also the primary email address of your Apple ID account. You can change your Apple ID to any other email address you control, as long as it's not already in use as an Apple ID. If your email address ends with @icloud.com, @me.com, or @mac.com, it's already an Apple ID.
Change your Apple ID - Apple Support
If you are certain that the email in question has never been used for an Apple ID and you are having issues contacting Apple Support regarding this issue, you may want to make sure you are going through the Apple ID support channel on the following page:
Apple ID - Contact - Apple Support
Regards,
- Brenden

7.7.07.30 not available for Solaris x86_64?

Similar Messages

Maybe you are looking for