7.7.1 Registry Setting Used by iTune Drivers error message
The auto update suggested updating my iTunes to 7.7.1.
When I tried to download, the install failed.
I downloaded 7.7.1 manually from the iTunes support website. On installation, I received the message 'Registry settings used by iTunes drivers for importing & burning CDs & DVDs are missing' and then something along the lines that other CD/DVD burning software have caused this problem. It suggests re-installing iTunes, which I have tried to do but I receive the same message.
I have not installed any other CD/DVD burning software since the PC was built about a year ago and have been running iTunes successfully since that time.
Apart from standard Vista Home Premium related CD/DVD software, Nero 7 Essentials is installed (and I frequently use this to burn CD/DVDs - infact I used this yesterday before doing the 7.7.1 install today so I presume this could be the problem. I also have HP Photosmart C5280 All-in-one printer/scanner has support software installed and Cyberlink DVD software installed but cannot recall the last time this was used.
Any thoughts please?
I recently had the same problem, and I fixed it by downloading and installing these drivers:
http://www.gearsoftware.com/support/drivers.cfm
Similar Messages
-
Keep getting error message "registry setting used by itunes drivers for importing
Keep getting error message "registry setting used by itunes drivers for importing and burning cds & dvds are missing", this can happen as a result of installing other cd burning software". The only software on my computer is original cd-dvd on my hp portable with Vista. My computer now recognized itouch as a camera. Ive uninstalled and reinstalled itunes, nothing changes.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W. -
I use an ipod classic 120G. When I try to launch itunes I first of all see a box stating "The registry settings used by itunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall itunes" This I have done. obviously I cannot burn CDs but worse still is my ipod is not being recognised by itunes and will not sync. I have not installed any new burning softeware. Any suggestions please?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
When plugging in my iPhone to my PC, I get message "The registry settings used by Itunes drivers for importing and burning CD'd and DVD's are missing..." Can I uninstall and reinstall the iTunes app without losing all the tunes I've purchased/loaded
many thanks.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
I continue to get the error message registry settings used by itunes drivers for importing and burning CD's and DVD's are missing. Please reinstall itunes. Reinstalling itunes does not fix the problems
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Maybe someone can help me - lately, I keep receiving this error message when I want to burn a CD: "The Registry settings used by iTunes drivers for importing & burning CD's is missing. Please re-install iTunes." I've re-installed a number of times and it still won't burn CD's. I can play the music through my PC. I just can't burn CD's. any ideas?
Same problem as me. No answers though. Also I can't access the itunes store. There is something missing in the registry but what? Seeing as your post was sometime ago it looks like there is no help.
-
when i start I tunes i get this message , The registry settings used by Itunes drivers for importing and burning CD'S and DVD's are missing please reinstall..ive reinstalled 5 times ,all 5 clean installs ...still dont work with Iphone 3 ..
Same problem as me. No answers though. Also I can't access the itunes store. There is something missing in the registry but what? Seeing as your post was sometime ago it looks like there is no help.
-
Basically we had a new motherboard fitted, we then found our CD/DVD drive had not been reconnected. After this has been done, when we try to burn a cd from itunes, we get the following message:-
The Registry settings used by itune drivers for importing and burning CD's and DVD's are missing. Reinstall Itunes.
I've removed and reinstalled itunes a few times now and we still have the same issue. HELP please.I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
When connecting to Itunes, it shows the following error: registry settings used by itunes drivers for importing and burning cds are missing.
I have edited the registery, downloaded the Gear drivers, uninstalled and installed itunes, and the error still appears.
What else can I do. Cannot connect any of our iphones or ipods to itunes because of this error.I have edited the registery,
We'd better have a closer look at the keys to see what's going on.
Can you post a screenshot of the contents of the key you've been editing, please? Include all of the regedit screen, including the left-hand column. Save the screenshot to an image file, and insert the image file in a reply by clicking the wee camera icon at the top of the reply window. -
Yes, it's the "Registry settings used by iTunes ...." issue which has been a problem going back at least to 2009, according to the posts here. You would think that Apple would make an effort to solve this, but apparently it's not of concern to them. Style - yes; function - no. Sigh.
In any case, I've read many of the ~200 threads and have, without success ....
* Reloaded iTunes
* Deleted iTunes, QuickTime, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support
* Verified that iTunes and related components are completely uninstalled
* Installed Gear drivers
System: Windows 7, 64-bit, 8GB RAM, all programs/updates/drivers current. Toshiba/Samsung CD player (current drivers).
Occasionally in this process iTunes has behaved properly when a CD is loaded, but then it reverts to dysfunction. Most frustratingly, the error message appeared immediately after that deleted/verified song and dance described above and recommended by Apple.
I have not gotten into messing with my registry because, well, if that's the level of user involvement required here then the program is truly broken. When I owned a 1959 Triumph I often had to tinker with the carbuerator, adjust the timing and use an ether starter spray, but automobiles seem to have progressed since then. I thought that Apple products "just worked." No. I've used Macs in the past and though I'm not a Windows fanboi, my work requires it and I've found Win 7 remarkably stable over the past 3 years. I've NEVER had an issue like this with any program (and I've installed/deleted/used many dozens).
Is this a fixable problem or should I just dump iTunes for something else that actually works? Opinions and suggestions appreciated. Thanks.I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
I have installed iTunes 7.3.1. When I start iTunes, I get an error window titled "iTunes Setup Assistant" The text in the window is "The reggistry setings used by itunes drivers for importing or burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall itunes." I then click on the ok button and itunes loads just fine but without the burn option. I have uninstalled Roxio Creator 8, Yahoo Picassa2 and any other softeware that might have a disc burning option. I then uninstalled itunes, rebooted and then reinstalled itunes. I still get the same message. What else can I do to get iTunes to be able to imnport and burn discs?xz
First try rebooting and repairing.
Reboot the PC (very important) and then do a repair install of iTunes. In Add/Remove Programs, select iTUnes, click "Change" and then click "Repair".
If no joy there, check for a device filter conflict in registry, as per the following document:
iTunes for Windows: Troubleshooting CD issues caused by device filters -
Registry settings used by Itunes drivers not found
I just installed the latest version of itunes after having an old version previously installed. Every time I run Itunes now I receive an error message. It says something about registry settings missing that are used by itunes drivers for importing and burning CDs and DVDs. It suggests re installing itunes and uninstalling any other CD burning software. I have reinstalled itunes perhaps 6 times now and i have not installed any other CD burning software - ever - windows media player was always installed. I don't think WMP should be interferring though since it didn't before. I receive this error message everytime i run itunes. Also, this may be related, I cannot consolidate my library. Everytime i select the option nothing happens. itunes does not react whatsoever.
toonz here is what it says now, but like I said it is working fine now.
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
iTunes 5.0.1.4
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: ATI MOBILITY RADEON 9000\ATI MOBILITY RADEON 9000
IDE\DiskTOSHIBAMK6026GAX_______________________PA202D_, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYDVD+-RW_DW-D56A____________________PDS3___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SONY DVD+-RW DW-D56A, Rev PDS3
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 255:57 on CDROM media.
Track 1, start time 00:02:00
Get drive speed succeeded.
The drive CDR speeds are: 4.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4. -
"The registry setting used by itunes for burning CDs are missing"
Whenever I start up Itunes... I get this error message.
"The registry settings used by the Itunes drivers for importing & burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall Itunes".
Problem is... when I reinstall itunes nothing changes.
I've got Roxio cd-burning software installed on my computer. Is there a conflict with this software?
I can't burn songs from Itunes on to a CD. I haven't tried importing a CD or DVD but I'm guessing that won't work either.
Any advice??
Nano Windows XPI was able to repair the problem.
FIRST__REMOVE THE WINDOWS XP MAY 15th Updates!
1. Go to gear's website and download either the 32
bit or 64 bit beta drivers depending on your
operating system.
2. install the drivers.
3. run regedt32 make the changes as follow. Find
the
key:
[HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\C
lass\{4D36E965-E325-11CE-BFC1-08002BE10318
Delete any entry for the lowerfilter
the upperfilter entry should be: GEARAspiWDM
4. reboot your machine and it should work.
ABIT Windows XP
Pro 64 bit windows
What is the address of the website that you have to get to in order to download the beta drivers? I am having the same problem and have also installed and re-installed itunes & quick time more than once. Help! -
TS3299 Registry settings used by Itunes drivers for buring CDs are missing
So incredibly stuck on this and I have already removed and reinstalled Itunes about 3 times. I kept getting the message that "registry settings used by the iTunes drivers for importing and burning CDS are missing. I followed all the instruction and even went to the Registry Editor and right clicked UpperFilters and was shocked to see that GEARAspiWDM" was already listed there--so the warning I keep getting that this driver is missing is wrong. Now what? Please help. I do not know how to work around this. Thank you
Can you post a screenshot of the contents of the key you've been editing, please? Include all of the regedit screen, including the left-hand column. Save the screenshot to an image file, and insert the image file in a reply by clicking the wee camera icon at the top of the reply window.
For example, this is what I'm seeing when I look at my key:
Maybe you are looking for
-
I cannot install itunes on my windows vista
I try to install itunes on my windows vista, it gives me a error
-
How to make the cost center or WBS field optional for Vendor/customer line?
Dear experts: Does anyone has the experience of releasing WBS or cost center fields to be optional for the customer or vendor line item? I've tested in system, neither the field status control in GL account master data nor the FSG in posting key work
-
Print Date located in Special Fields In Field Explorer
Post Author: sher CA Forum: General The "print date" on my report displays the first date I ran the report which was 6/11/07. This date should display the system date/current date. Do you know why this is happening in my report?
-
Know about the Error -36: an I/O error occurred?
I need help...trying to compress movies and this is the error I get in the export box.
-
hi, can anyone hlp that how to give print commnad in applet or frame?