7.7 will not finish install process on Vista

7.7 will get through most of the install process (even the "registering modules" portion) and right at the end, when the status bar is all the way to the right, it just freezes. No error sign or pop-up window, the "next" button is grey'd out, it merely does nothing...just never quite finishes. I have read through some of the articles; made sure that I am the admin; checked the windows firewall; made sure the screen resolution is correct, and even went through my norton antivirus to see if anything raised a red flag, which to my knowledge didn't.
Any suggestions?
The same thing happens when I try to load the new version of quicktime only (without iIunes)....
Message was edited by: nickifs

Another point...when I try to close the frozen install window "cancel" or the red close button usually doesn't work, thus I have to go into task manager and do it that way. When trying to install the program again, it always says "Quicktime could not install, iTunes needs quick time." Then goes on to give me another error message: "another program is installing, try again later." I then have to go into Task manager (processes) again and end "QuickSet, iTunes Setup (Elevated), and iTunes helper. I am not even sure what these are...

Similar Messages

Will not finish install

A bit frustrated. Logic x will not finish install. Interface appears to come up and ask for previous session. After which the ubiquitous spinning wheel. Have read other posts advising to install in safe mode but did not resolve the problem. Wondering if any other suggestions concerning MIDI drivers or the like interfering with and sell? Have been using logic nine many years now. Have never run into such a problem. Thanks for any help.

Another point...when I try to close the frozen install window "cancel" or the red close button usually doesn't work, thus I have to go into task manager and do it that way. When trying to install the program again, it always says "Quicktime could not install, iTunes needs quick time." Then goes on to give me another error message: "another program is installing, try again later." I then have to go into Task manager (processes) again and end "QuickSet, iTunes Setup (Elevated), and iTunes helper. I am not even sure what these are...

I am having trouble installing itunes. I get so far and it will not finish installing Quick time. Error %appdata%/ what does this mean? We had itunes before and it vanished? I have Windows 7 and explorer 9

I having trouble reinstalling itunes. I have windows 7 and explorer 9. Keep getting as for as itunes installed and it will not finish installing Quick time.also, keep getting error message "could not find location %appdata%/. What does this mean?

http://www.apple.com/support/itunes/contact/

HT4312 this update will not finish installing It reaches the writing package receipt stage and stalls anybody else have this issue?

this update will not finish installing It reaches the writing package receipt stage and stalls anybody else have this issue?

this update will not finish installing It reaches the writing package receipt stage and stalls anybody else have this issue?

I phone app will not finish installing update cannot use it cannot delete it

Iphone 4S automatically updates my apps. Open Table will not finish installing a new update. It will not let me delete the app (and there are no restrictions on in settings). I cannot open the app. I have no idea how to get it to finish the update. I have the latest IOS on my iPhone. Help! I love Open Table and want to be able to access it.

Hi Kurtsfan,
If you can't update from the phone itself, please try updating the app on your computer and sync it from there.
iTunes: How to resume interrupted iTunes Store downloads
If you can't complete the download on your iOS device, you can download it in iTunes on your Mac or PC and then sync it to your iOS device. You can also transfer purchases from your iPhone, iPad, or iPod to a computer.
Take care,
Nubz

Adobe Acrobat 11 will not finish installing on my iMac running 10.9.4. Any ideas?

When trying to install Adobe Acrobat 11 Pro on my iMac running 10.9.4, the install will not finish and hangs when installer indicates "running package scripts". Any ideas on how to resolve?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. The contents of the log will appear on the right. Each log message begins with a timestamp. Select the messages from the time of the last installation or update attempt. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again. Select the new messages that appear. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
☞ If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
☞ When posting a log extract, be selective. Don't post more than is requested.
☞ Please don't indiscriminately dump thousands of lines from the log into this discussion.
☞ Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. You may need to use a text editor with search and replace, such as TextEdit.

Update 8.1.0 will not finish install

Hello all! I'm running Acrobat 8.1.0 Std on a Win 2003 Server Terminal Server. I am getting errors Event ID 1000 that says:
Faulting application ds4.exe, version 4.99.1.0, faulting module msvcrt.dll, version 7.0.3790.3959
So I open Acrobat > Help > check for updates and it starts a 6 MB download of V8.1.3 Standard Update.
This seems to unpack and copy files then pops up "Adobe Acrobat 8.1.3 Standard Update failed to install."
This generates an EventID 11708 that says:
Product: Adobe Acrobat 8 Standard - English, Français, Deutsch -- Installation failed.
And an EventID 1023 that says:
Product: Adobe Acrobat 8 Standard - English, Français, Deutsch - Update '{AC76BA86-A660-0000-2550-7A8C40000000}' could not be installed. Error code 1624. Additional information is available in the log file C:\DOCUME~1\richm\LOCALS~1\Temp\21\MSI418d6.LOG.
That log file tells me:
MSI (s) (90:A0) [16:27:27:755]: SOURCEDIR ==> D:\data\installs\adobe_standard_8\Adobe Acrobat 8 Standard\
MSI (s) (90:A0) [16:27:27:755]: SOURCEDIR product ==> {AC76BA86-1033-F400-BA7E-000000000003}
MSI (s) (90:A0) [16:27:27:755]: Looking for file transform: W:\WINDOWS\Installer\107bcb.mst
MSI (s) (90:A0) [16:27:27:755]: Unable to create a temp copy of transform 'W:\WINDOWS\Installer\107bcb.mst'.
MSI (s) (90:A0) [16:27:27:755]: Note: 1: 2203 2: W:\WINDOWS\Installer\107bcb.mst 3: -2147287037
MSI (s) (90:A0) [16:27:27:755]: Couldn't find cached transform W:\WINDOWS\Installer\107bcb.mst. Looking for it at the source.
MSI (s) (90:A0) [16:27:27:755]: Looking for file transform: D:\data\installs\adobe_standard_8\Adobe Acrobat 8 Standard\107bcb.mst
MSI (s) (90:A0) [16:27:27:755]: Unable to create a temp copy of transform 'D:\data\installs\adobe_standard_8\Adobe Acrobat 8 Standard\107bcb.mst'.
MSI (s) (90:A0) [16:27:27:755]: Note: 1: 2203 2: D:\data\installs\adobe_standard_8\Adobe Acrobat 8 Standard\107bcb.mst 3: -2147287038
DEBUG: Error 2203: Database: D:\data\installs\adobe_standard_8\Adobe Acrobat 8 Standard\107bcb.mst. Cannot open database file. System error -2147287038
Some other posts in this forum suggested downloading the stand-alone version of the 8.1.3 update, which I did. When I run AcrobatUpd813_all_incr.msp is pops up "The upgrade patch connot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program."
When I try to get support it tells me the Product Key is invalid, yet under Acrobat Help > Activation both the "Activate" and "Deactivate" options are greyed out. When I tried Adobe Tech Support Chat they told me to call support 800-642-3623 and could not offer any help at all.
I'm thinking of trying to uninstall and reinstall late-night when nobody is on the server and then try the updates again. But I'm afraid my key will be bad and my users won't have the Acrobat to use the next morning and I certainly don't want to buy a another version if I already have a registered version!
Anybody have any ideas on the .exe error or the .dll error or how to work around these install/upgrade issues? Or how to resolve the activation error?
I'm all ears! Only thing is I have a small time window late-night if I need to reboot.
Thanks in advance :-)
FilthyStinkinRich the Admin in CLE OH

okay, I will try to help you.... which program from microsoft needs updating? Maybe you need to go to microsoft's website and download from there *making sure you have chosen to save it where-ever, then run it* As for your emails, I don't know. Save your incoming and outgoing email settings, then delete your old user account, set up a new one, typing in needed info where appropriate. I think there is also a spam/junk filter in there somewhere. Perhaps you need to talk to your ISP (internet Service Provider) to see what they can do. I have never heard of someone being hacked into thru email
oh, and one last thing. This is a common mis-understanding. This part of the Apple forum is for Mac Pro's ( the big desktop towers) and you have a macbook Pro, which is portable. If you can please post your question in the appropriate forum, that we may be able to help you better
thank you
John B

I can not figure out why acrobat reader will not re-install on my vista business laptop.

I had reader forever. I had a problem with Flash so I un-installed everything to do with adobe. No I have re-installed flash and activex but adobe reader will not istall or download from the website. Please help me get a download link for reader.
I have 64 bit windows vista business.
thanks
josh

You can try using this tool to first remove all traces of previous versions of Reader:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
and run it immediately after restarting your computer.

Photoshop CC will not finish installing

I recently downloaded CC and Lightroom and Photoshop installed without a problem. Then, an update was identified for Photoshop. It seemed to download and install fine until the end. It never finished the update process.
I've restarted my Windows 8.1 computer many times and opened and closed CC apps many times since then. They all work fine. Every time I start up the computer, CC tells me I have an app with a pending update and it shows this screen.
How can I get the update to complete? Thank you for any assistance you can offer!

Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Boot Camp will not finish install

I just bought my first my first Mac Pro 2.4 8 Core with RAID and Lion OS. I can not get Boot Camp to fully finish the install of Windows 7. I get stuck at when the screen ask for which location to install, NO locations in the window. I called APPLE twice and Microsoft once and no help from neither. Any suggestions ? Does RAID have anything to do with it?

If you bought an Apple Pro RAID hardware controller, you can't install Windows.
And the card isn't worth it even if that wasn't an issue, it is, and there is a tech note:
http://www.apple.com/support/macpro - RAID FAQ
Anyone at Apple should have known.
That card has only supported drives of under 2.2TB also.
I would have advised on fast 4 or 6-core rather than slower 2.4.
100+ tips on buying upgrading and what to expect with your Mac:
Mac Performance Guide Reviews

HT4623 Apps will not finish installing or updating

Apps on my I pad never finish updating or installing. It has been serval days and my apps are still updating. What can I do to get them to install?2

If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
Another thing to try - Turn the iPad Off & then back ON.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
 Cheers, Tom

SBC 's DSL will not finish installing

We've installed SBC's DSL software and done the wiring as instructed, but according to SBC techs, after restarting, the software isn't full installing. They don't know why. When we launch Internet Explorer, the watch just spins forever. Help.

Speaking from experience, I never had the need for the SBC software. I always had it loaded on the machine, but I was just interested in having the online access. With the capability of DSL, there are a host of applications provided by Apple that utilize the service in the same way as SBC's software. It is not necessary to load the software provided just to get the DSL service. After reformatting all of my drives, I opted not to use the SBC install CDROM.
If it is something you need however, You can try to reload making sure no other application is running. I also noticed you are running OS9. You have probably already checked that you have the correct version of the install software. Over and above that, I am not able to think of anything else that would make your CDROM not work in your machine, sorry!
Or you can manually configure it in the TCP/IP seetings in your control panels.
Let us know how it goes,
me

HELP! FLASH PLAYER WILL NOT FINISH INSTALLING! (OSX 10.6) - In DESPERATE need of help.

I've tried 100 times to install the latest flash player, but it stops at 95% every time and never goes any farther. I've tried uninstalling, restarting, re-downloading the Flash Player, and repairing my disk permissions and NOTHING works! Because I uninstalled it, I now have NO flash player at all! Kind of panicking. I need it for things I use to make a living.What do I do?
I have a Mac Pro 6 Core 6.33GB / 16GB of Ram

Hi,
Could you please download Flash Player from the following link: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html#install er
Close all browsers and double-click the downloaded file.
Thanks,
Sunil

Applications will not finished installing

I have downloaded Pocket Informant and when I go to install on my Tour it says downloading for over 1 day. I have deleted and tried to reinstall after rebooting and the same thing happens. I tried this with BBM (which disappeared after downloading pocket informant) as well and am having the same problem. Has anyone experienced this and if so, how did you resolve it?
Thanks

Hi and Welcome to the Forums!
If you are doing this via AppWorld (you didn't say...), please clear the application cache:
1. Open App World
2. Go to My World
3a. For keyboard-based BB's -- Hold down the ALT key and then press, in sequence R, then S, then T
3b. For Storm/Pearl -- Hold the num-lock (!?123) button so it locks and then press, in sequence 3, then 4, then (
4a. If your BB locks after issuing the cache clear, perform a battery pull reboot
Then try your install again
Hopefully it'll work for you! Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

ITunes will not finish the restoring process for my iPhone 4s

So I have been trying to restore my iPhone 4s but iTunes will not finish the process. I have the latest versions in both my phone, iTunes and windows updates... I have restarted the iPhone, the comoputer and iTunes... I'm at a lost on what to do. The phone screen has the plug going toward the iTunes icon but when I do connect it to iTunes it does not restore. iTunes goes through the motions until it gets to "preparing iPHone to restore" after that it just kind of stays there for about half an hour and then it shoot out an error 2003 saying the iTunes couldnt' finish the process... I have all of my firewalls off too... Any suggestions?

I'd possibly say to check USB connections. Maybe another cable.
All else fails, you might try to restore on another computer.

7.7 will not finish install process on Vista

Similar Messages

Maybe you are looking for