7 pin s-video to 4 pin s-video

My laptop has a 7-pin s-video port. all my Tvs have 4-pin s-video ports. how do i make them work together?
Solved!
Go to Solution.

Oh, a note:  If you don't need the extra signals (audio output typically), then just a normal 4-pin S-video cable is all you need.  A 4-pin plug will fit into a 7-pin socket.
If you need component video output, coaxial digital audio, or stereo analog audio, you'll need a laptop-specific dongle, usually from the laptop manufacturer.  There is no standard pinout for the extra pins added.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Similar Messages

  • Are there any 30 pin female to lightning adapters that support video and audio together?

    I have a wowwee cinemin slice projector and I wondering if there are any products that will convert the 30 pin to lightning that supports audio and video, since the Wowwee Cinemin Slice plays video through the iPhone, but currently only has the 30 pin adapter?  Thanks so much.

    yeah, and I can't believe that you can't buy sushi for breakfast, but there it is. Chris CA is right. Lightning will NOT support analog video out. It will do audio, though. So...your best bet would be to buy a Lightning digital AV adapter (2nd generation) then try to find an HDMI to 30 pin cable. I'm presuming that the wowee has a 30 pin socket on it... I see.... it also has a VGA and a mini-HDMI port on it, so you'll have to use the last two, perhaps, unless you can find  cable that goes from HDMI to 30 pin male end, then 30 pin female to female, to finally connect with the wowee. I  have yet to see a 30 pin female to female adapter, and I suspect there will never be one.  I can't believe many things, either, scoody. Apple is not known for going backwards, once it has introduced a new standard. It may try to acommodate some people, but it will never be able to please everyone.  In any event,  I think it was mentioned by Apple that, in moving to Lightning, some 30 pin stuff might not work, and the wowee cinemin slice is probably one of those things...
    welp--there you go
    John B

  • How do I add my video files to the "home videos" folder on itunes?

    Sorry, I'm relatively new at this, I'm trying to add my family videos to my itunes "home videos" in itunes but I can't seem to bring them into my library.  ideas?

    make sure they are MP4 or MOV files, and simply drag them into the library window of iTunes.

  • My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate.

    My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate.  When I "Preview In Browser" through Edge it plays (I have created a shape and used the "play video full screen" snippet)  in full screen mode just fine.  When I "Preview Site In Browser" through Muse and click on the shape to PLAY VIDEO FULL SCREEN, it does nothing.  I am new to both programs and can't figure out why it will work out of the preview window in Edge and won't work when I publish to Muse.  Does anybody have an answer or a work-around for me?

    Hi Watch this video,
    If this is what you need, you can get it here [[zazaalaza's]].mulib - Google Drive

  • If I have a list of Vimeo videos on a webpage, how can I use just one video frame and have all videos play in that one frame?

    I am creating a page with a list of Vimeo video links. I want to have only one video frame on the page. So no matter which video link a user clicks on, the chosen video needs to play in that one video frame on the page. How do I do this in Muse?
    Thanks.

    You can use composition widget for this. Insert the video details in trigger container and then insert that corresponding vimeo video widget in that specific target container. So It would work like, users will click on different video buttons but the actual video will play on same frame which is actually a target container of composition.
    The ID that we use for vimeo widget cannot be used for different videos on same time , because every video shares its own ID and url. But you can surely try the above.
    Thanks,
    Sanjit

  • Every time I make a call or I'm receiving a call my phone is extremely static i can't hear the person on the other line and the person on the other line cannot hear anything They say that they hear a lot of static now my videos when I play a video on YouT

    Every time I make a call or I'm receiving a call my phone is extremely static i can't hear the person on the other line and the person on the other line cannot hear anything They say that they hear a lot of static now my videos when I play a video on YouTube for instance works just fine Siri  works just fine. I can't make a call or receive a call whatsoever because all I hear is static and I haven't dropped the phone in water nothing has really happened this literally happened overnight

    This is a wireless carrier issue.  The fact that the speaker & microphone work properly for other apps is a great indicator that your device is fine.
    Contact your wireless carrier about your call quality issue.

  • My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.

    My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.
    The Videos are showed up front 4 months, but now they are no longer to be seen. When you star a video first the hard drive starts, but then it stops and hangs up. I have to restart it, starting with the apple logo....

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • How can I download video from a Canon ZR30 video camera to my IMac.  I bought Elgato Video Capture, but the connections do not match.  There is no white female end in the camera.  Also, the red and yellow connections are loose at the camera end.

    How can I download video from a Canon ZR30 video camera to my IMac?  I have Elgato Video Capture, but the provided connectors are loose in the camera and the camera does not have a white female end.  No signal shows up on the computer when I connect the red and yellow connectors.

    Broken solder joints on the camera me thinks!!
    sorry

  • How can you get your iPhone videos to compress to one video instead of 5 different frames?

    How can you get your iPhone videos to compree to one video instead of different frames

    It sounds like you to 5 separate videos. If you start recording, then stop it, then start it again, you will have 2 videos. Not 1. As for splicing them together, you will need a video editing package for your PC. I don't know if Windows Movie Maker (or whatever they're calling it now) can handle this or not. On a Mac, I'd say just use iMovie.

  • I need a DVI-Video adapter or a MiniDisplayPort-Video adapter to capture analog sources in my Mac.

    I need a DVI-Video adapter or a MiniDisplayPort-Video adapter to capture VCR and analog sources. Which is the right one for the Mac Pro (Early 2009 with NVIDIA GeForce GT 120 board)? Because i´ve seen a couple of cables but they say it´s just for Power Mac G5. I need exact model for my mac pro. I found this one but its´ just for Mac Pro with with ATI X1900 XT. The question is which one do I need for the NVIDIA GeForce GT 120 board? Is is the same one?
    http://store.apple.com/us/product/M9267G/A
    Thanks a lot!
    MacSpecs:
    2.66 GHz Quad-Core Intel Xeon
    12 GB 1066 MHz DDR3 RAM.
    Magui

    There was a similar post just the other day with what I think is the same confusion.  You said,
    I need a DVI-Video adapter or a MiniDisplayPort-Video adapter to capture VCR and analog sources.
    And the way I read that is you want video input (keyword you used was "capture").  Is that what you really want?  If so adapters you are looking at is for video output, i.e., to send video from your computer to a display device (e.g., a TV or monitor).  If you really want to video input (into your computer) then a simple cable isn't going to work.  You need a pci card that handles such functionality.

  • S-video on 7-pin cable problem

    Hi, I have problem with my s-video on laptop 3000 N200 (0769). When I connecting s-video 7-pin cable to the laptop - other side to TV (chinch), nothing happend. No CTRL+F7, no detection even when I try open gma control panel. BUT when I connecting 4-pin cable to the laptop - other side to TV (chinch) I have a black & white picture, when I click on gma control panel icon. So the s-video is working but seems only on 4-pin cable (but why in B&W?) And why s-video doesn't work on 7-pin cable ?? Any sugestions? 
    Sorry for my english  
    Best regards, pepe99. 

    First of all, I can't enter to the options of GMA when I'm connected with 7-pin s-video (because there are no connection/nothing happen) These options only enable when I connect 4-pin svideo to laptop. And then I could change PAL/NTSC - but there are no changes. My TV don't have option to change system, I'm from Poland so I believe it is PAL system BUT What's going on with this 7-pin connector??????? Cable was check on another laptop with 7-pin input - guest what? There was beautiful COLOR picture - cable is OK.

  • Unable to publish projects with inserted video - error message The Flash video can not be loaded

    I've created a project in Captivate 6 with two slides that have inserted videos in them
    Both the videos were created in Captivate 6 by publishing those projects as mp4 videos
    They play fine in the previews but when publishing I get the error saying the Flash video can not be loaded for both of those slides and in the output files the area for the video is blank.
    I have checked that the videos are not open anywhere else as I saw on a previous post this was the issue but the only place they are in use is in the project I am trying to publish.
    Below are my settings and the error message
    Any suggestions would be greatly appreciated.

    Your screenshot indicates you are publishing to a folder on a network drive.
    Have you:
    Verified whether or not the video file exists at the published folder location? (It should ideally be sitting in the same folder as the SWF that calls it.)
    Verified that the folder location is set up as a trusted location in your Flash Global Security settings?

  • I need to send a video in quick time, by videoing on my iphone is it automatically in quicktime

    i need to send a video in quick time, by videoing on my iphone is it automatically in quicktime

    This means it was transferred from your computer via the iTunes sync process. No other way for the video to be where it is located unless it was purchased/downloaded from the iTunes store direct with your iPhone.
    If no longer available on your computer and not purchased from the iTunes store, there are 3rd party paid apps/utilities that provide for transferring this in the opposite direction.

  • I cannot install the component for QuickTime to convert videos done by a Sony video camera. My iMac tells me that software is designed for previous versions of Os x. Any ideas?

    I cannot install the QuickTime component for MPEG-2 to read and covert video files created by Sony video cameras. My iMac tells me that the software is designed for previous versions of OS X.
    Any ideas?

    Ok, so after like 4 days of going through all these different issues, I figured out that several programs weren't downloading, and it was an issue with my wireless connectivity messing up the digital signatures, so if you plug in your comp to the modem and delete your temp files, it should start to work!

  • Video player won't display video after OS update

    Just installed new OS update on my Z30. Video player will not display video but I have audio 

    Hi and Welcome to the Community!
    Hmmm..."just installed"...hmmm...how long ago please? And have you conducted several reboots since, and let it "settle" for about 48 hours?
    Also, "new OS update"...can you be more specific please? Each user is separately controlled (usually by their own carrier) as to what OS they receive, so "new" for one may not be the same version as "new" for another.
    Let us know.

Maybe you are looking for