7001 port not response

Hi
We are using WLS5.1+sp6 on Solaris7. welogic use the default listen port
7001. We met the following problem several times:
All clients can't connect weblogic server any more, and we can't ping the
7001 port at the same time. First we do "ps -ef" on solaris to confirm the
weblogic is running, and then do "netstat -a" on Solaris to get the network
situation, and find that the 7001 port is still listening.
Thanks for your help (in advance)!

"kaityyu" <[email protected]> wrote:
Hi
We are using WLS5.1+sp6 on Solaris7. welogic use the default listen port
7001. We met the following problem several times:
All clients can't connect weblogic server any more, and we can't ping the
7001 port at the same time. First we do "ps -ef" on solaris to confirm the
weblogic is running, and then do "netstat -a" on Solaris to get the network
situation, and find that the 7001 port is still listening.check out the ip you are using to ping/connect to weblogic...
also make sure some other appln is not using it.or check out whether weblogic started properly at 7001.
>
Thanks for your help (in advance)!

Similar Messages

Firewire port not responsive

I am trying to import vhs video into my Imac using component cables from VCR to my Data Video analog to digital converter, then firefire 800 to 400 to the imac.
All that show up in the iMovie options is the built-in isight camera. The converter works fine on my old G5, but I'd like to get rid of it and go just with the Imac.
Any ideas what is wrong or other methods to import?

reset FW bus, same goes for USB reset...
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

Print not response when i connect T1100 Epson to router RT-N16 ASUS with USB port???

For my macbook pro that I brought July 2010. I can print with T1100 Epson printer connect directly to my mac but when I connect T1100 to ASUS Router RT-N16 with USB port and I assign print to T1100 pass through wireless It's not response. How do we do please ???
Many Thanks for your answer...

Hello Shawnondrums,
Welcome to the HP Forums.
I see that you are having an issue with the printer shutting down when attempting to connect to the wireless network.
A very important step that gets easily over looked is, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Once the printer is back on, please use the on/off button to do a proper shut down and restart. This will also do a semi power reset on the printer.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Cupsd's bootstrap server port not found

I've got both Samba and CUPS turned off at startup, yet I get this recurring error in the system log:
Dec 12 19:07:12 /usr/sbin/smbd: cupsd's bootstrap server port not found
Dec 12 19:07:13 /usr/sbin/smbd: cupsd's bootstrap server port not found
Dec 12 19:07:13 /usr/sbin/smbd: cupsd's bootstrap server port not found
Dec 12 19:07:14 /usr/sbin/smbd: cupsd's bootstrap server port not found
I kill smbd but it starts up again, apparently thanks to /usr/libexec/launchproxy
I'm using the default configuration files for Samba and CUPS and there is no printer set up. Using OS X 10.4.3 (not Server). repaired permissions.
this is driving me nuts...any suggestions welcome.

I get that response all the time, it doesn't seem to have any relevance to anything and as far as I can tell, doesn't impair the functioning of my machine.
sometimes, too much information is too much information...
Miriam

PI-MDM Port Not Found Issue

Dear Experts,
We are posting a message from MDM to ECC via PI. Idoc was successfully created in ECC.
Our requirement is : getting a response message from ECC to MDM via PI. Message reached PI but not posting to MDM Port folder and in CC Monitoring error is as below::
"Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found"**
Could you please provide your inputs.
Thaking you.
Hemanth

Hi Hemanth,
Please check the Setting for Inbound Messaging (communication channel) of PI
http://help.sap.com/saphelp_nwmdm71/helpdata/en/48/9854884d3217cee10000000a421937/content.htm
Make sure here you fill all parameters correctly along with <serverName>:<portNumber>, Port Code and Remote System Code etc of the inbound MDM port.
Also, check that there is no more than one MDM receiver configured per MDM inbound port in your system landscape. Deviating from this guideline can lead to a race condition state where different MDM receiver communication channels are monitoring the same MDM inbound port, and only the first one receives the import acknowledgment of the message.
Just check and revert with result.
Regards,
Mandeep Saini

Mountain Lion Mac Mini Server Ethernet Port Not Working

I have a Mac Mini Server and once I upgraded to Mountain Lion Server the Ethernet port is unresponsive. It worked before upgrading. Is there something with Mountain Lion Server that is causing the Ethernet port not to work properly?

Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

PI MDM Adapter Error - MDM port not found

We are working on an R/3 - PI - MDM scenario using the PI MDM Adapter. We are currently encountering the following errors.
In RWB - Communication Channel Monitoring
MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
In RWB - Message Monitoring
2009-09-08 15:31:22 Error Message could not be forwarded permantely to the JCA adapter. Reason: System error: MDM port not found
2009-09-08 15:31:22 Error Message could not be forwarded to the JCA adapter. Reason: Permanent error: Adapter call failed. Reason: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found
2009-09-08 15:31:22 Error Adapter Framework caught exception: System error: MDM port not found
2009-09-08 15:31:22 Error Delivering the message to the application using connection MDM_http://sap.com/xi/MDMAdapter failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found.
Is there an issue with our receiver communication channel and the MDM Access Parameters? We are using the Port code and Remote System code provided by the MDM team.
Anyone experience this same issue?

We are no longer seeing the MDM Port Not found error, but we are still seeing the UnknownServer error. Looking at RWB Message Monitoring it appears that the message is successfully sent to the MDM server, but nothing is coming into the Ready folder. Any ideas on where the message is going, and why it is not showing up in the Ready folder?
In RWB - Communication Channel Monitoring
MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
In RWB - Message Monitoring
2009-09-11 14:04:15 Information The message was successfully received by the messaging system. Protocol: XI URL: http: //XXXXXXXX/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2009-09-11 14:04:15 Information Using connection MDM_http ://sap.com/xi/MDMAdapter. Trying to put the message into the receive queue.
2009-09-11 14:04:15 Information Message successfully put into the queue.
2009-09-11 14:04:15 Information The message was successfully retrieved from the receive queue.
2009-09-11 14:04:15 Information The message status was set to DLNG.
2009-09-11 14:04:15 Information Delivering to channel: MDS_TEST_CC
2009-09-11 14:04:15 Information The message was successfully delivered to the application using connection MDM_http ://sap.com/xi/MDMAdapter.
2009-09-11 14:04:15 Information The message status was set to DLVD.
I thought the implementation of the MDM Adapter was suppose to be straightforward and simple
Edited by: Chris Williar on Sep 11, 2009 9:56 PM

Windows 8.1 Flash CC 2014 Not responsive for about 30 seconds every 10 mins or so... Trying 30 day trial.

I am trialing CC 2014 to open some files from an animator. It locks up all the time for between 10 to 60 seconds. It picks up fine once it wakes back up, but it happens very regularly and doesn't seem to relate to any particular activity.
During this time it is marked in the task manager as (Not responsive) It doesn't seem to be taking up a huge amount of CPU or disk read/write during this. It happens whether I have the network connected or not.
It's the only thing on my laptop that does this. I have CS4 installed and it doesn't have this issue.
My laptop has 16GB ram, quad core i7 and good size solid state with over 100GB free space that can do 550MBps.
Is anyone else having these issues? It's unusable, but it's giving me plenty of tea breaks so I suppose that's something.
I know someone who seems to have similar issues on Flash CS6.
Thanks,
Mike

Wooah, yeah I think that's done it. Also seems to have fixed it for my friend using CS6. Thanks for the help. I guess I was right with my every 10 minutes estimate then, it was exactly 10 minutes
Surprised it locks it up so bad though. Maybe there should be a warning message if it regularly takes longer than a few seconds telling you what it was and how to disable it.
Thanks,
Mike.

Problem removing bluetooth stack / hidden devices / COM ports not released

Hi
Having problem completely removing Toshiba Bluetooth stack / hidden devices / com ports not released
I uninstalled Toshiba BT s/w...
But:
1) Toshiba BT hidden devices still appear and I can not remove (get error)
2) COM ports occupied by Toshiba BT not released (so they cannot be used by another BT stack) and still appear in registry
ex: friendly name Toshiba BT Port (COM4) still in registry
3) These unreleased com ports do NOT appear in device manager
Thanks

It seems that you still have some configurations which were not removed during the uninstallation.
This means that the resources can not be release, because those are still necessary in case of a
new installation of the stack.
The first I would try is the following:
- Install the latest Toshiba Bluetooth stack.
- Uninstall it. Ensure that you answer all questions with "yes" ! This means also the one which asks if all configurations should be removed.
- Reboot
- Check again

Serial ports not appearing in MAX - VISA installed.

Hi All,
Had a rather strange issue today that I couldn't resolve with serial ports not appearing in MAX (and hence being inaccessible to LabVIEW). Under the windows device manager it shows 4 COM ports and I have verified with an external program that they are functioning correctly.
I had the LabVIEW 2011 SP1 f2 runtime installed, DAQmx 9.6.1 and NI-VISA 5.3 (5.2 also didn't work).
Things I have tried:
- Updating VISA from 5.2 to 5.3
- Reinstalling the COM port devices under device manager
- Changing the COM port numbers
- Verifying that the COM ports are functioning correctly
- Tried adding a USB to Serial converter as a new COM port
- Reinstalling MAX
- Reinstalling NI-VISA
- Reinstalling everything (reboot each time when prompted)
- Resetting the hardware configuration from within MAX
- Run installers / MAX as administrator (this is running from the local admin account)
- Checked that NI-VISA appears under software in MAX
- Repaired MAX/NI-VISA
Is there anything else that could cause the COM ports not to appear in MAX when they appear (and work correctly) in device manager when a reinstall of NI VISA / MAX won't solve?
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets
Solved!
Go to Solution.

I found the solution - it turns out that the serial ports were available to LabVIEW, they just didn't show up in MAX because installing just the runtime does not show the devices in MAX.
Despite doing a lot of googling earlier, it didn't throw up this knowledgebase article until I searched for it under a different phrase - http://digital.ni.com/public.nsf/allkb/766FD80DAE42E52886256A0200619CFE?OpenDocument
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

Trackpad not responsive when MB connected to an external device

After I installed Maverick on my MP retina, every time I connected my smartphone the screen freezes and the trackpad is not responsive anymore. Never happened before. What shall I do? Reinstall Lion? Thanks.

The higher resolution is pushing you to the next higher rendering resolution. If you are in Develop and set zoom position to 1:4 or 1:8 it should speed back up (each level is 4 times as fast as tge previous).

Parallel Port Not Assigned

Changed my LapTop with ME to another one with XP. While trying to configure my DAQPad 1200, MAX 2.2 shows no options on the parallel port other than "Not Assigned". I have an older Lap also with XP and I could install the DAQPad. Both computers are TOSHIBA, Satellite. Is there a driver with corrected bugs for XP? Thanks for the help

Refer to the previous post linked below:
DAQPad-1200 parallel port not assigned

Macbook pro 2011 mouse / keyboard not response in heavy load

When I am playing games in the 2011 Macbook pro. Mouse clicks / keyboard sometimes not response or delay, this occur when the machine under heavy load.
This won't happened in my old BLACK core duo Macbook.
Does everyone notice this?

If your machine is less than a month old, you should use your warranty and call AppleCare (you have 90 days of phone support) or take your machine back to the Apple Store (make an appointment with the Genius Bar first) and let them deal with the issue.
If yours is the 13" model, there is a thread on here (somewhere) about trackpad and keyboard failures when also using Bluetooth, I think (don't quote me on that - I don't have the affected machines so I don't follow the thread too closely).
But I do believe that Apple is aware of the issue and had 'fixed' it in either a patch preceding 10.9.4 or in 10.9.4 itself.
Give them a call...
Clinton

Servermgrd: cupsd's bootstrap server port not found

This issue was posted last fall, but no one had ever posted with a solution to it. About every 2 minutes in /var/log/system.log, I get the following message:
servermgrd: cupsd's bootstrap server port not found
This is on an Xserve running 10.4.5. No printers are attached or will be. I'm not sharing any printers either.
Again, its just an annoyance, but why is something logging to system.log if its not actually a problem?

same prob here. really annoying. ever find the cure?
-ed

HT201412 Touch screen input not responsive.

Touch screen input not responsive. Cannot slide to power off. Appear message "iCloud Backup: This ipad hasn't been backed up in 2 week. Backups happen when this ipad is plugged in, locked, and connected to wi-fi" Touch OK but nothing change. Does follow instruction but nothing works

Thank you for your help.
I did all of trouble shooting procedures but it did not work.
I called Apple Care and explained what kind of problem i had and they booked me up with Genius Bar @ Apple Retail Store.
I went to them last Saturday and they replace my troubled iPhone with the new.
they said it is very rare problem reported so far and i could be the first few ones.
it was no hassle and they all were very kindly listened to me.
anyway, problem solved with replacement and i was lucky to have back up for iPhone.
Anyone has same problem, call 800-MY-IPHONE and book yourself to nearest Genius Bar to get your iPhone served or replaced.
thanks

7001 port not response

Similar Messages

Maybe you are looking for