701 fp2 reinstall problem

I would like to reinstall Belle fp2 on my Nokia 701 via Nokia Suite, but always getting error service or server is not available try next time.
If I connect my E-51 reinstallation starts without problems.
Any suggestions how to reinstall fp2 on my 701 - 059H1X4

Hi cotoousu,
Sorry to hear about what's happening to your phone. Just to verify, is this happening randomly? Or is this when you are using a downloaded application? Did you download apps from third party sources? Make sure that all of your apps were downloaded from the Nokia Store because if you're downloading applications from third party websites, there's a big possibility that you'll get apps that are incompatible with your phone and it could cause your phone to random reboots and freezes. If that's your case, it is best to uninstall them and to only use apps from the Nokia Store. However, if you don't have any of these, you can try to reinstall the software version of your phone using the Nokia Suite (You can download Nokia Suite here. To reinstall, follow these steps:
Connect your phone to your PC via USB cable.
Launch Nokia Suite.
Go to Tools and then Software updates.
If there's no available updates, you will see an option there to Reinstall your software version.
Click it and then follow the on screen instructions.
Let us know if this helped you.

Similar Messages

Nokia 701 hard rest problem

Hi everyone;
I updated my nokia 701 by wifi to belle fp1
after that I rest my phone thinking that could help me solving problems I Suffered
Unfortunately , every thing was gone ( ovi store , photo editor , video editor,....... )
I tried to reinstall ovi store but the installation is filled
*I bought the mobile before 20 days ( Warranty Is still valid ) ! is that the end between me and him or there is any solution for my problem ^
thanks all & sorry about my English ^

Missing files can be located here:
CWRT Core 1.00(11124).sisx
http://www.mediafire.com/file/swzukldje3bddjo
Adobe Reader LE 10.00(245).sisx
http://www.mediafire.com/file/vcvbay4v919r40w
Quickoffice 6.04(460).sisx
http://www.mediafire.com/file/8c4gfxirf23xa5d
Symbian belle photo+video editor.sis for Symbain belle
http://www.mediafire.com/?1xvgt8pgbs1fp
Apologies for the links to Mediafire... I've had trouble uloading files here.
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button.

Nokia Suite and Nokia 701 Cable Driver Problems

Hi, I just bought a Nokia 701, and so far I love it, the only real problem I have is that I can't connect it with Nokia Suite through the provided cable, because the driver never get installed properly, everything OBEX fails to install.
So the only real way I can fully connect my Nokia 701 with Nokia Suite is via Bluetooth, but the speeds are dramatically slower. So I'd like to know if there are others having this problem or if I'm the only one. And in case this problem is already known, will there be a solution for it soon?
I also have a Nokia 5800 ExpressMusic and it has the same problem for ages. And it has never been solved, which I think it's pretty bad in a company the size of Nokia.
Just to clarify I'm using Windows 7 at 64 bits, and the latest version of Nokia Suite (3.3), and I'm trying to connect a Nokia 701 and a Nokia 5800, and both get driver incompatibilities that can't be resolved by the automatic Windows 7 search, and can't be resolved by searching for it manually with Windows Update, Windows Compatibility Site says that Nokia 5800 ExpressMusic should be 100% compatible, but, maybe because of the fact that Nokia 701 is relatively new, there is no information on the Windows Compatibility Site, about the device.
Please help me with this problem, it's very important for me to be able to connect both my cellphones via cable to the Nokia Suite application.
A preemptive thank you for all your help.

Hey Sevennikke7, Welcome to the Nokia Forums.
To fix the problem, try the following solutions:
disconnect the USB cable and connect it again.
If you use a USB hub, try connecting the phone directly to the computer.
If you use a USB hub with an external power source, make sure that it has been switched on.
Check the USB cable for problems and replace if necessary.
If your phone asks you for the connection mode that you want to use, make sure that you select Nokia Suite(or PC Suite) on your phone.
Disconnect the cable, restart the computer, and try again.
Keep in mind that if you remove USB devices without using the Safely Remove Hardware tool in the Windows taskbar, connection problems may appear.
Go to Add/Remove Programs in Control Panel (called Programs and Features in Microsoft Windows 7).
Select Nokia Suite in the list of applications and click Change/Remove.
In the dialog that appears, choose Repair.Nokia Suite then check that all the needed files are intact and repairs any errors that were found.
Control Panel > Programs > Programs & features > Nokia Connectivity cable driver, right click and Change/Repair
Try go Control Panel > View Devices > Remove your device profiles and reinstall them.
As both devices cannot connect to your computer I believe it is a problem with drivers inside your PC.
I hope this helps and you manage to resolve your issue. Please get back to me if your problem persists.
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Can someone help me - OS reinstall problems.

Alright guys, I'm feeling pretty stressed about my situation right now.
Here is what happened....
I have a 13' MBP pro that I bought at the start of 2012. It was new then.
Months ago I attempted to install Windows via Bootcamp, but it failed.
Since then, I have had to press option every time I turn on my machine and select the Macintosh HD to boot up. The choices there were Mac HD (mine), Recovery HD and the Windows Partition that was never used.
I have not been able to delete the partition where Windows was supposed to be installed. Whenever I do, it says "partition cannot be mounted". But this is not my problem. I have just lived with the extra partition and space I can't use.
Today, it turned off on me for no reason. When I pushed the power button, pushed option and slected the Mac HD to boot up, it turned off on me again. Multiple times. So I opened the recovery HD. I attempted to verify, and repair the Macintosh HD multiple times. Every time it failed, telling me to back up my stuff (which I couldn't do because it would just turn off), erase the drive and restore. I tried everything I could think of, verifying, repairing, restarting, etc. To no avail.
So, I erased the hard drive. I have no time machine backup, luckily I did not have a lot of files that weren't copied already, so erasing it was not a huge loss.
Then, I hit reinstall OS X from the Utilities menu in the Recovery HD. It tells me "to set up the installation of os x mountain lion, click continue." So I do. It verifies, and has me sign into my iTunes account.
Here's a wrench in the works: I have recently changed regions. I have moved from the US to South America (specifically Ecuador).
When I sign into my apple account via Recovery HD Utilities, it gives me the message "This Apple ID is only valid for purchases in the U. S. iTunes Store. You will be switched to that store." (I don't know what this means really). So, I hit okay. Nothing happens.
I repeat the steps to sign in, and then it gives me "This Apple ID has not purchased Lion. You must sign in with an Apple ID that was used to purchase Lion." But I have purchased Lion. I can see it in my iTunes on my GF's computer.
How do I fix this? I don't care about having lion at this point. I will take leopard, snow leopard, lion or mountain lion. I am using my girlfriends Mac (10.5.8) with no App store. I don't have any recovery disc, not even snow leopard or leopard.
Any suggestions to getting a functional OS on this machine are accepted and appreciated.
Here are my measley thoughts and/or ideas:
Make a Leopard disc (somehow?) from my GF's computer and boot up using that.
Download a disc image of one of the OS's and boot up using that.
Somehow get to a Mac with the App store on it, download my already US purchased Lion install file and either burn that to disc or thumbdrive to install on my mac.
Throw my computer out the window and never touch another PC again.
Please help. thanks.

Here is an update:
My problem was (among other things) was that I had purchased Lion and not Montain Lion So, I upgraded the other Mac I have access to and purchased the Mountain Lion update. I recovered via internet overnight after making the purchase.
The OS worked for about 6 or 7 hours and then it shut off on me again for no apparent reason. When I rebooted, the computer went to the Recovery OS, with what seemed like no OS installed. I repaired and rebooted pressing the option key looking for a drive with the OS installed, but there was none.
So, through internet recovery I would have waited another 6-7 hours to upgrade the system with Mountain Lion via internet. Instead of that, I made a boot disk with the other computer for Mountain Lion. I made it with an SD card. I followed the instructions carefully.
Using the boot disk I attempted to reinstall. The first few times it would just progress to somewhere near the end and then the install program would close and it would return to the Recovery Option screeen. There was no succesful install and on restart it would not show a regular Mac drive, just the recovery drive. Eventually, it told me near the end of the progress bar that "Items could not be downloaded from the internent" and it would return to the Recovery OS screen, with no succesful install.
Now, after all this, I have lost the option for internet recovery. The comuter will only go to Recovery HD when the SD card is in the slot, otherwise it flashed the Folder with the Question mark in it....or.....shows me a spinning globe that says internet recovery for a few seconds, and then flashes a yeild sign with an Exclamation point and underneath is says "Apple Error -6002F."
So I can't use the SD card to successfully install the OS, and I cannot enter the Recovery HD unless the SD card is in the slot. The Recovery HD will not allow me to choose internet recovery mode. I think this may be because if it sees a boot disk it defaults to that.
Should I try making another USB boot disk? I feel like my problem may be beyond that however, seeing as how originally it would just shut off for no reason then finally it made me reinstall the OS, and then after reinstalling doing the same thing. Would it be a RAM issue? A HD issue? Can I even tell? I cannot enter diagnostic mode either. At least not by rebooting and holding D.
Thanks to all who read.
Any info, suggestions, tips or advice?

Windows 8 reinstall problem

Hi everybody!
I'm new in this forum. I bought my Lenovo thinkpad L430 last December with windows 8 installed, and now I was trying to install Linux in dualboot. The problem is that Linux asks for two primary partitions to be installed, but on my computer there were already 4 primary partitions (6 partitions).
That's what I did: I copy the recovery partition (13 Go) over a external hard drive, and I tried to reinstall windows to change the partitions during the installation process. To do that I choose the option reset in the menu.
But it was not possible to reinstall windows 8.
Now the system does not boot over windows anymore.
Moreover I do not have any image of my operating system. So I would like to know how I can reinstall windows 8 on my computer. I lost my windows 8 license ?
Thanks for any help!

I noticed you're missing a 350mb recovery partition (see my shot below. I have a Flex 15 thus the smaller size).
The partition layout is so much more complicated with UEFI...
←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗
Tap that kudos button if I helped ^^
←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗
Attachments:
diskmanagement.png ‏51 KB

CS3 reinstall problem - asking for uninstalled CS4 beta

I have a PowerBook G4 with 1.5 Gb RAM running Mac OS 10.4.11. I have the CS3 Suite installed and last year downloaded a beta copy of Fireworks CS4. After using it a bit, I uninstalled Fireworks CS4 with the Adobe uninstaller.
I recently had a problem with Bridge and decided to uninstall and reinstall the software. I uninstalled Photoshop CS3 (in order to uninstall Bridge) and when I began to reinstall Photoshop, the installer ask me to insert the Fireworks CS4 disk! Since I don't have that disk, I hit cancel and the install terminated (I tried this multiple times and rebooted each time)
I then downloaded and ran Adobe's CS4 Cleanup app. It found NO CS4 apps to clean up.
Any suggestions would be appreciated.
Mark

Thanks Neil and Buko for your input. Here's where things stand now:
1) I uninstalled FW CS4
2) I uninstalled CS3
3) I ran Cleanup Script
4) I repaired permissions using Disk First Aid
5) I reinstalled CS3
The problems with Bridge remained (sluggish, won't display icons properly, won't show a preview image, won't operate the folder list, etc.).
So I called Adobe support. Unfortunately, because I am having problems installing CS3 and NOT CS4, support is NOT FREE. The rep was helpful though -- she pointed me to document number 331594 (Diagnosing Bridge problems) and told me to start there. I followed EVERY step . . . disable start-up scripts, reverted to original preferences, cleaned up the cache, disabled the folder windows, and the problems remain.
Guess I'll have to pay . . .
Lesson learned: don't trial Adobe software. That's when my problems began.

Nokia 701 touch sensitive problem

I have with me 701 with the latest firmware version, i often have touch sensitive problem. Sometimes it get ok by just switch off the phone and sometime by removing battery (becoz then button too don't work).
what should i do?
Someone Plz help !

Hi salih_367,
Thank you for your post and welcome to the forums!
We're sorry to hear about your problem. It seems that your Nokia 701 headphone plug has a connectivity problem. As the problem is likely caused by the phone hardware, it is something you cannot fix yourself without voiding the warranty. What you can do however, is to check if the socket may have gotten some dirt or fluff in and try clean it.
If the problem persists, we would advise you to visit your nearest Nokia Care Point and let them have a look.
Let us know how you get on,
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Nokia 701 lock slider problem

Hi guys, i bought my 701 a month ago and i'm experiencing an annoying problem with the screen lock/unlock slider at the side of the device (probably after updating to Belle FP1) sometimes when i lock/unlock the screen it repeats the action twice, for example when i unlock the screen it unlocks and suddenly it locks again i tried soft and hard reset but no luck is there any solution ?
Solved!
Go to Solution.

Take it to Nokia care
If my post has helped you please click the white star on the right

Iphoto reinstall problems

Hi, after numerous problems with "Mavericks" I have ditched it and returned to "Mountain Lion" however, whilst I have been able to rescue "pages", "numbers" etc, I am unable to return to the "mountain lion" version of iphoto. Can anyone offer any suggestions as to how to reinstall an older version of iphoto - one that will operate with Mountain Lion?

Restore the iPhoto app from your last Time Machine backup from before the upgrade to iPhoto. You cannot download a full version of iPhoto '11 from Apple's Support pages or the App Store, if you already upgraded to Mavericks and iPhoto 9.5.1.
How did you originally buy iPhoto? If it came preinstalled with an older system (MacOS 10.6), then you will find an iPhoto '11 installer on your system install media with the bundled application. If you bought an iLife '11 installer, use that.
Other than that, your only option would be to buy iPhoto again ( aniLIfte '11 install DVD) or solve the issues with Mavericks on your system and use the iPhoto 9.5.1 you have.

Uninstalling/reinstalling problems

I am having trouble uninstalling/reinstalling itunes. My add/remove files list says I can not remove the program. When I try to repair or reinstall it. I get a box that pops up that says "The feature you are trying to use is on a network that is unavailable" "Click OK to try again or enter an alternate path to a folder containing the installation package 'itunes.msi' in the box below" then the choices are;
C:\Documents and Settings\Owner\Local Settings\Application Data\Apple\Apple Software Update\
and
C:\Documents and Settings\All Users\Application Data\Apple Computer\Installer Cache\iTunes 8.0.0.35\
I am not a very tech savy guy so any help dumbed down for me would be a huge help.
The problem arose from me trying to run itunes and this message apearing "This action is only valid for products currently installed"
The library is all still there it now has the songs as quicktime files. Thanks

In addition to having iTunes open, you must also have at least one track selected for these features to work. Note that you must have tracks selected, rather than playlists, albums, etc.

Reinstall problem with CS3. HELP!!

Hi there
I can't open my photoshop so thought i'd reinstall from my creative suite (CS3).
After a little while it ejects the disc and asks for 'Please insert Adobe Flash CS4 Professional to continue installation'..... but i don't have Adobe Flash CS4 Professional discs...never have. Any ideas??

Hi, strange as it seems, it's common!?
http://kb2.adobe.com/cps/407/kb407277.html
Issue
When you reinstall an AdobeCreative Suite 3 application you receive the error message, "Please insert Adobe [application] CS4 to continue installation."
On Mac OS:
1. Download the CS3Installer Patch utility.
2. Unzip the CS3Installer Patch utility.
3. Double-click the CS3InstallerPatchMac folder to open the directory.
Note: Make sure that you are logged in as Administrator.
4. Double-click the file "CS3installer patch."
Now reinstall your CS3 application. On Mac OS, go to the [username]/Applications/Utilities/Adobe Installers folder and double-click the application you want to reinstall. On Mac OS X, you can't use your CS3 DVD or electronic download of CS3 to reinstall. Running the CS3Install Patch only resolves the problem if you reinstall the application from the Adobe Installers folder.

Premiere CS3 Reinstall Problem

I am currently running Windows XP Pro on a Matrox Axio system in which the CS3 Creative Suite was already installed for me upon purchase. As of late I've had problems with Quicktime (Premiere and After Effects no longer see it as a compatible format) and I was hoping that as a solution, I could reinstall Premiere and After Effects from the original discs.
This theory might work but when I get the disc to the Progress portion of the reinstall, it asks me to "insert CS3 Production Premium Disc 1 into drive \\prod\Adobeapps". I don't claim to be an expert but I just cannot figure out what the installer is asking me to do and I'm very frustrated. I tried a multitude of Quicktime-related fixes that didn't yield results and I was really hoping to try this particular fix to see if it works. Does anyone have experience with this error? If so, what was your method of bypassing it?
If this helps in any way, Quicktime stopped working with my system when one day Premiere couldn't get past the CompilerAIFF.prm during the initial program load. I went back a few hours on a system restore and when I got Premiere up and running again, Quicktime was no longer a viable option. I've tried totally reinstalling stand alone Quicktime (and I did use the Windows Installer Clean Up to remove iTunes and Quicktime before the reinstall) and I've tried repairing Quicktime in the Control Panel, and helped. In fact, attempting to repair Quicktime led to a "fatal error on install" and put me back where Premiere got hung up on the CompilerAIFF.prm again.
Any help I could get would be much appreciated.

Thanks Neil and Buko for your input. Here's where things stand now:
1) I uninstalled FW CS4
2) I uninstalled CS3
3) I ran Cleanup Script
4) I repaired permissions using Disk First Aid
5) I reinstalled CS3
The problems with Bridge remained (sluggish, won't display icons properly, won't show a preview image, won't operate the folder list, etc.).
So I called Adobe support. Unfortunately, because I am having problems installing CS3 and NOT CS4, support is NOT FREE. The rep was helpful though -- she pointed me to document number 331594 (Diagnosing Bridge problems) and told me to start there. I followed EVERY step . . . disable start-up scripts, reverted to original preferences, cleaned up the cache, disabled the folder windows, and the problems remain.
Guess I'll have to pay . . .
Lesson learned: don't trial Adobe software. That's when my problems began.

CS4 reinstall problems

I have been using CS4 for many years with no problem ever reinstalling after a computer factory reinstall until today. When I go to install CS4 back onto my computer this is what I get: "Some of the application components are missing from the application directory, please reinstall the application." I have reinstalled it 2 times now and nothing is working. Can someone guide me in the right direction? Thanks!

MMR75 are you still installing the software from your original installation media? If so you may want to download a fresh copy of the installation files. Please see http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html for information on how to download the installation files. Please make sure to complete the Very Important Instructions prior to scrolling down the page and clicking on the download links.

Windows 7 reinstall problem on Lenovo G770

Re Installing Windows 7 ultimate on my Lenovo G770, have deleted all partitions apart from LENOVO One Recovery Partition. The install works fine, installs , reboots a few times, loads files onto the designated partition ... but just as it boots for the last time , it goes into cyclic reboot, but never loads the windows ( no bluescreens, just goes past F2 - F12 screen, and restarts) Am I missing something, in BIOS etc ... ? , have installed Windows XP on machine, it works fine ....

Hi crumdub12,
Welcome to Lenovo Community Forums!
The only thing I can think of in a BIOS setting is the SATA mode, Check it inside BIOS under Configuration,
AHCI or Compatible, check between the two.
If not, Why did you reinstall the OS, Did the previous one had problems? Because it might be the HDD afterall that caused the first issue, I would suggest to have the HDD checked as well.
Regards
Solid Cruver

AT&T Communications Manager reinstall problem

I'm running a MacBook Air with OS X 10.8.1. I bought an AT&T USBConnect Force 4G, and the AT&T Communications Manager software installed correctly when the device was connected. After installation Communications Manager wanted to update and I let it, and the update failed. So, I tried to uninstall Communications Manager by dragging it to the trashcan (I'm fairly new to the Mac community and, silly me, trusted AT&T to write a proper Mac program to uninstall this way!) As it turns out, AT&T says one must use the Communication Manager uninstaller or files will be left behind. Ok, Ok, I didn't read that instruction and I screwed up. I get that.
Problem is, I cannot reinstall the AT&T Communications Manager software. When I try to reinstall, the program says it can't install because there's a newer version of the Communications Manager already present. I cannot find the files I need to delete--as I said, I'm a fairly recent convert to Mac, and I don't really know how to navigate around in the OS X file system very well. I tried Time Machine but that didn't work.
Please advise as to how I would locate the files I need to delete...
Thanks much,
Roger

metcalfdds wrote:
I'm running a MacBook Air with OS X 10.8.1. I bought an AT&T USBConnect Force 4G, and the AT&T Communications Manager software installed correctly when the device was connected. After installation Communications Manager wanted to update and I let it, and the update failed. So, I tried to uninstall Communications Manager by dragging it to the trashcan (I'm fairly new to the Mac community and, silly me, trusted AT&T to write a proper Mac program to uninstall this way!) As it turns out, AT&T says one must use the Communication Manager uninstaller or files will be left behind. Ok, Ok, I didn't read that instruction and I screwed up. I get that.
Problem is, I cannot reinstall the AT&T Communications Manager software. When I try to reinstall, the program says it can't install because there's a newer version of the Communications Manager already present. I cannot find the files I need to delete--as I said, I'm a fairly recent convert to Mac, and I don't really know how to navigate around in the OS X file system very well. I tried Time Machine but that didn't work.
Please advise as to how I would locate the files I need to delete...
Thanks much,
Roger
Well, my experience with T-mobile and Verizon WWAN installers finds that they splatter stuff all over the system including kernel device drivers. Sounds like at&t is no different. Simply dragging the visual application icon to the trash never completely uninstalls this crud.
I use a Mac application called Pacifist developed by CharlesSoft dot com. It is $20 shareware that also has a countdown try button. It installs in /Applications and launches as a graphical tool. Drag the original at&t installer onto Pacifist and it will then present a hierarchy of the installation file names and locations. Once you have this detective information, you can surgically remove the indicated files from your system.
Your are new to the Mac community. Are you new to the UNIX terminal command line? If yes, then you should allow someone else more experienced with the terminal interface to follow the above approach, because one wrong move with terminal file removal and you could find yourself re-installing OS X. Also, if TimeMachine has been backing up your entire system, you have this undesireable installation in your back-ups. A wrong restore could re-create your problems.

701 fp2 reinstall problem

Similar Messages

Maybe you are looking for