701 K Physical inventory Vendor Consignment

Hi,
while posting 701 K in SAP in MB11, the system throws the following error
Message No M7001.Check table 150F: entry K does not exist.
We checked in T150F table (Stock Types and Allocated Fields in Physical Inventory).
There are few entries for special stock K.
Please help
Thanks

Dear,
T Code OMJJ to to Movement 701
go to Allowed transaction, watch whether MB11 is there or not. if not then Add there.
and now also check in Field Selection for batch and watch this is maintain or not
701 GR phys.inv: consgmt K Consignment (vendor)
if not then maintain.
Hope this solve ur problem
Regards,
Pardeep malik

Similar Messages

T-code WV31 create physical inventory for vendor consignment stock

Hi all,
I have some issue with T-code WV31i n Sap Retail. Even though it supposed to create physical inventory doc for unrestricted use stock, it also create physical inventory Docs for special stocks (vendor consignment stock). What could be the reason?
Best regards
Sameera
Edited by: Sameera on Dec 23, 2011 7:07 AM

Hi,
If i do physical inventory for 2 quantity.
1. Consignment Payables account debited with 2 qty ( Now stock becomes 4 nos)
If i issue 4 quantity
2. Consignment Payables account credited with 4 qty.
If i do consignment settelment, it is setteling 4-2 (for 2 quantity).
But I want to settele for 4 quantity.
Thanks,
Maruthi

Carrying out physical inventory count for Consignment stock.

Hello,
Can you please tell me what are the steps for carrying out physical inventory count for Consignment stock provided by vendor?
Sincerely,
Ketan

HI
IN MI01,, select the special stock indicater,, then PI will be created for consignment stock also.
regards,
sudhakar

Stock transports of vendor consigned inventory

Hello. I have a question with regard to doing a stock transport order (from one plant to another) where the inventory is in vendor consigment stock. I have a stock determination rule set on both the materail and item category (NLN) but it appears I also need this set on the movement type 641 but transaction OMJT does not have this movement in the list.
Does anyone know if you can create a stock transport order for vendor consigned stock and do a delivery where by the stock is issued direct from the vendor consigned stock? If so, is there an OSS note that needs applied or how do i get this movement in transaction OMJT.
I am on version 4.0B of SAP.
Thanks. K.

1) SPRO > Materials Management > Inventory Management and Physical Inventory > Stock Determination > Define Strategies for Stock Determination (I guess this is already maintained, but please check it)
2) SPRO > Materials Management > Inventory Management and Physical Inventory > Stock Determination > Assign Stock Determination Rule in the Applications > Delivery (please assign the rule to your delivery type)
3) SPRO > Materials Management > Inventory Management and Physical Inventory > Stock Determination > Assign Stock Determination Rule in the Applications > Inventory Management (for mvt 641)
If you use WM:
SPRO > Materials Management > Inventory Management and Physical Inventory > Stock Determination > Assign Stock Determination Rule in the Applications > Warehouse Management
Please also assign the stock determination group to the suitable material masters (MARC-EPRIO; MM02 > "Plant data / stor. 2")
Edited by: Csaba Szommer on Oct 20, 2010 4:28 PM

MM-Physical Inventory

Hi all,
Is it possible to do backdated Physical Inventory for Customer Consignment??
I have tried it however sysyem always compares stock with the current stock and posts the difference ,,,not with reference to the back date i am referring to,,
Experts any suggestion on it??
Refards
Shrinivas

Hi
Please go with following transaction
MI01>Create physical inventory document>Enter Document Date>Planned count date>Plant Code>Storage Location>Click on Enter button>you will get the separate screen>Enter material code>and click on SAVE button (Ctrl+S)>you will get Physical inventory document number. (MI02-Use for delete)
(After getting Physical inventory document number you go with MIO4)
MI04>click on enter button>you will get "Enter inventory count screen>Enter Phys. inventory doc.no>Fiscal year>Count date>click on enter button>you will get separate screen>Enter physical qty>and click on save button ((Ctrl+S)>you will get massage from the SAPu201D Count entered for phys. inv. doc. 100000112"
(After completed above transaction you please go with MI07)
MI07>you will get Post inv.differences: initial screen>Enter Phys. inventory doc.> Fiscal year> Posting date>click on enter button>you will get separate screen with deference qty>click save button (Ctrl+S)> you will get document number generated from the system (Diffs in phys. inv. doc. 100000112 posted with m. doc. 4900001246)
Physical Inventory:
Physical Inventory is a business process in which physical stock is matched with book (system) stock. It is legal requirement to carry out physical inventory at least once in a year.
Physical inventory can be carried out both for a companyu2019s own stock (Unrestricted, Quality, Blocked Stock) and for special stocks (Customer Consignment stock, Vendor consignment stock from vendor, Returnable packaging). This inventory is carried out saperately for both type of stocks.
Physical Inventory Processes:
Several inventory processes available for physical inventory which includes as follow:
1. Periodic Physical Inventory
o All stocks of the company are physically counted on the balance sheet key date
o Every material must be counted
o Entire warehouse must be blocked for material movements during count.
2. Continuous Physical Inventory
o Stocks are counted continuously during the entire fiscal year.
o It is important to ensure that every material is physically counted at least once during the year.
3. Cycle Counting
o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
4. Inventory Sampling
o Randomly selected stocks of the company are physically counted on the balance sheet key date.
o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
Physical Inventory Process Cycle Flow
1. Creation of physical inventory document
- Physical inventory document(s) is created individually or using the batch program, click for more information
- The transaction codes for creation physical inventory are as follow
Individual Inventory documentation creation
MI01 - Individual physical inventory creation
MIS1 - Inventory Sampling document creation
MICN - Cycle count inventory document creation
Collective Inventory document creation
MI31 - Own stock without special stock
MIK1 - Vendor consignment
MIQ1 - Project stock
MIM1 - Returnable Transpiration material
MIW1 - Customer Consignment stock
MIV1 - Returnable material with customer
MIO1 - Material provided to Vendor (Subcontracting material)
2. Print physical inventory document
- Physical Inventory document can be printed based on the physical inventory document status and or item status
- Transaction code MI21 is used to print the inventory document where print default value can be populated
3. Count the physical stock
- Based on the inventory document printout, the warehouse person will check the stock of material physically and note that on print out. This is completely physical process.
4. Enter count in system
- On completion of physical count, the count result is needs to be entered in the system. This can be with reference (using Tcode MI04) or without reference (using Tcode MI04) to the physical inventory document.
- If count quantity for that material is ZERO then select ZC (zero count) column instead of putting 0 in qty field. If 0 is used for zero count then systm will consider that as "not counted"
5. Analyze difference
- Once count is posted in the system, difference analysis can be carried out using transaction MI20
- The output gives information based on the input criteria i.e. physical inventory document, plant, material etc.
- The output gives information about the book quantity, Counted quantity, difference in quantity and value.
- From this output list, you can carry out further process ie initiate recount, change count quantity, post difference
6. Initiate recount and follow the steps 3,4,5
- If found unacceptable difference, recount is initiated using directly from difference analysis list (transaction code MI20) or using transaction code MI11.
- New inventory document will be created for selected items or for entire document
- The original document items will be deactivated once recount is initiated so original document will not be available for further process.
- On initiating recount, you need to process same as for new count document.
7. Post the difference
- Several options are available for posting difference
- Post difference after count is posted using transaction code MI07
- Posting the count and inventory differences using transaction code MI08, here you have created physical inventory but not counted so with this you can count and post difference in sinle step.
- Entering the count without a document reference using trasnaction code MI10, with this you can create inventory document, enter the count and post difference in single step.
some more points for posting difference
- Posting period must be open to post inventory difference.
- The fiscal year is set by specifying a planned count date when creating a physical inventory document.
- Tolerence to crear difference per user group can be set in customization.
- The system will generate material document for the difference qty and post the value to appropriate account (for valuated stock)
- The movement type in material document will be 701 or 702 based on gain or loss of material.
Serial Numbers in Physical Inventory
If material is managed with serial number then it is possible to carry out physical inventory for material with serial number. There are some pre-requisite before you carry out physical inventory for serialized materials.
- Serial number profile must be maintained in the material master.
- the serialization procedure MMSL (maintaining goods receipt and goods issue documents) has to be assigned to serial number profile.
- The stock check indicator in the serial number profile should be configured.
- Maintain basic settings for the serial numbers in customization for Serial Number Profile.
- Configure serial number management for physical inventory in the Settings for Physical Inventory step in Customizing for Inventory Management.
Blocked Stock Returns are the stock which is return stock from Customer or the stock which can be return back to vendor. To restrict the usage of this stock mostly business do transfer posting for this mateial as BLOCKED stock
Rgds,
Rajesh

How to trace vendor consignment when reclass happen

hi all,
we're facing an issue of loosing aging traceability due to re-class happened on batch.
here is the process/logic:
Our logic is to retrieve data from MSLB (Special Stocks with Vendor) first, from there were getting material doc/year/profit center/quantity with movement type
(541,542,543,544,701,702,309) from MSEG based on the following logic.
     select mblnr bwtar prctr bwart xauto menge mjahr
      into (w_mslb2-mblnr, w_mslb2-bwtar, w_mslb2-prctr, w_mslb2-bwart,
      w_mslb2-xauto, w_mslb2-menge, w_mslb2-mjahr)
      from mseg
      where matnr = w_mslb-matnr
        and werks = w_mslb-werks
        and lifnr = w_mslb-lifnr
        and charg = w_mslb-charg
        and bwart in (541,542,543,544,701,702,309).
With the above data, we get the document posting date from MKPF. And we calculate the aging based on the date for movement type 541.
    select single budat into w_mslb2-budat
    from mkpf
    where mblnr = w_mslb2-mblnr
      and mjahr = w_mslb2-mjahr.
    case w_mslb2-bwart.
     when '541'.
        w_mslb2-aging = sy-datum - w_mslb2-budat.
In case reclass on batch happen.
eg:
541 for part A batch#123
309 to reclass part A to batch#456
543 for part A batch#456
we'll not able to capture the correct aging days for original
part A batch#123.
Please advise anywhere we can link up between part A batch#123 and part A batch#456 in order to trace the aging.

Hi,
      They has not been done tranfer posting consignment to own(411k) and issues.Thats y stock is still avilabe.So user have to do these things in sap.
If you want to do stock is nil without these things do Physical inventory but it is not advisable.
Regards,
Murali

How to do Physical inventory process in Warehouse

Hi Guys
What is the procedure for Physical inventory process in Ware house
Kindly provide step by step procedue

Hi
Please go with following transaction
MI01>Create physical inventory document>Enter Document Date>Planned count date>Plant Code>Storage Location>Click on Enter button>you will get the separate screen>Enter material code>and click on SAVE button (Ctrl+S)>you will get Physical inventory document number. (MI02-Use for delete)
(After getting Physical inventory document number you go with MIO4)
MI04>click on enter button>you will get "Enter inventory count screen>Enter Phys. inventory doc.no>Fiscal year>Count date>click on enter button>you will get separate screen>Enter physical qty>and click on save button ((Ctrl+S)>you will get massage from the SAPu201D Count entered for phys. inv. doc. 100000112"
(After completed above transaction you please go with MI07)
MI07>you will get Post inv.differences: initial screen>Enter Phys. inventory doc.> Fiscal year> Posting date>click on enter button>you will get separate screen with deference qty>click save button (Ctrl+S)> you will get document number generated from the system (Diffs in phys. inv. doc. 100000112 posted with m. doc. 4900001246)
Physical Inventory:
Physical Inventory is a business process in which physical stock is matched with book (system) stock. It is legal requirement to carry out physical inventory at least once in a year.
Physical inventory can be carried out both for a companyu2019s own stock (Unrestricted, Quality, Blocked Stock) and for special stocks (Customer Consignment stock, Vendor consignment stock from vendor, Returnable packaging). This inventory is carried out saperately for both type of stocks.
Physical Inventory Processes:
Several inventory processes available for physical inventory which includes as follow:
1. Periodic Physical Inventory
o All stocks of the company are physically counted on the balance sheet key date
o Every material must be counted
o Entire warehouse must be blocked for material movements during count.
2. Continuous Physical Inventory
o Stocks are counted continuously during the entire fiscal year.
o It is important to ensure that every material is physically counted at least once during the year.
3. Cycle Counting
o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
4. Inventory Sampling
o Randomly selected stocks of the company are physically counted on the balance sheet key date.
o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
Physical Inventory Process Cycle Flow
1. Creation of physical inventory document
- Physical inventory document(s) is created individually or using the batch program, click for more information
- The transaction codes for creation physical inventory are as follow
Individual Inventory documentation creation
MI01 - Individual physical inventory creation
MIS1 - Inventory Sampling document creation
MICN - Cycle count inventory document creation
Collective Inventory document creation
MI31 - Own stock without special stock
MIK1 - Vendor consignment
MIQ1 - Project stock
MIM1 - Returnable Transpiration material
MIW1 - Customer Consignment stock
MIV1 - Returnable material with customer
MIO1 - Material provided to Vendor (Subcontracting material)
2. Print physical inventory document
- Physical Inventory document can be printed based on the physical inventory document status and or item status
- Transaction code MI21 is used to print the inventory document where print default value can be populated
3. Count the physical stock
- Based on the inventory document printout, the warehouse person will check the stock of material physically and note that on print out. This is completely physical process.
4. Enter count in system
- On completion of physical count, the count result is needs to be entered in the system. This can be with reference (using Tcode MI04) or without reference (using Tcode MI04) to the physical inventory document.
- If count quantity for that material is ZERO then select ZC (zero count) column instead of putting 0 in qty field. If 0 is used for zero count then systm will consider that as "not counted"
5. Analyze difference
- Once count is posted in the system, difference analysis can be carried out using transaction MI20
- The output gives information based on the input criteria i.e. physical inventory document, plant, material etc.
- The output gives information about the book quantity, Counted quantity, difference in quantity and value.
- From this output list, you can carry out further process ie initiate recount, change count quantity, post difference
6. Initiate recount and follow the steps 3,4,5
- If found unacceptable difference, recount is initiated using directly from difference analysis list (transaction code MI20) or using transaction code MI11.
- New inventory document will be created for selected items or for entire document
- The original document items will be deactivated once recount is initiated so original document will not be available for further process.
- On initiating recount, you need to process same as for new count document.
7. Post the difference
- Several options are available for posting difference
- Post difference after count is posted using transaction code MI07
- Posting the count and inventory differences using transaction code MI08, here you have created physical inventory but not counted so with this you can count and post difference in sinle step.
- Entering the count without a document reference using trasnaction code MI10, with this you can create inventory document, enter the count and post difference in single step.
some more points for posting difference
- Posting period must be open to post inventory difference.
- The fiscal year is set by specifying a planned count date when creating a physical inventory document.
- Tolerence to crear difference per user group can be set in customization.
- The system will generate material document for the difference qty and post the value to appropriate account (for valuated stock)
- The movement type in material document will be 701 or 702 based on gain or loss of material.
Serial Numbers in Physical Inventory
If material is managed with serial number then it is possible to carry out physical inventory for material with serial number. There are some pre-requisite before you carry out physical inventory for serialized materials.
- Serial number profile must be maintained in the material master.
- the serialization procedure MMSL (maintaining goods receipt and goods issue documents) has to be assigned to serial number profile.
- The stock check indicator in the serial number profile should be configured.
- Maintain basic settings for the serial numbers in customization for Serial Number Profile.
- Configure serial number management for physical inventory in the Settings for Physical Inventory step in Customizing for Inventory Management.
Blocked Stock Returns are the stock which is return stock from Customer or the stock which can be return back to vendor. To restrict the usage of this stock mostly business do transfer posting for this mateial as BLOCKED stock
Goto SPRO -> Sales and Distribution -> Billing -> goto Copy Control -> use Copy control Between billing doc to sales doc.
select the line which refers to ur billing doc and Return Sales doc.
Goto Item level and please check the Check box saying Update Doc Flow .
This check box will keep track of Refernce qty between Billing Doc and Return Sales Doc.
Rgds,
Rajesh

Physical Inventory - need to reverse the posting

Hello Everybody,
We performed a cylce count on work center in a plant. There were 4 numbers that we had to do a recount on. I was unable to enter the recounts. By mistake I posted the document before the changes were made. I tried to cancel the mat doc but was unsuccessful. I need this posting reversed.
Can anyone pls guide me.....?

Hi
Please go with following transaction
MI01>Create physical inventory document>Enter Document Date>Planned count date>Plant Code>Storage Location>Click on Enter button>you will get the separate screen>Enter material code>and click on SAVE button (Ctrl+S)>you will get Physical inventory document number. (MI02-Use for delete)
(After getting Physical inventory document number you go with MIO4)
MI04>click on enter button>you will get "Enter inventory count screen>Enter Phys. inventory doc.no>Fiscal year>Count date>click on enter button>you will get separate screen>Enter physical qty>and click on save button ((Ctrl+S)>you will get massage from the SAPu201D Count entered for phys. inv. doc. 100000112"
(After completed above transaction you please go with MI07)
MI07>you will get Post inv.differences: initial screen>Enter Phys. inventory doc.> Fiscal year> Posting date>click on enter button>you will get separate screen with deference qty>click save button (Ctrl+S)> you will get document number generated from the system (Diffs in phys. inv. doc. 100000112 posted with m. doc. 4900001246)
Physical Inventory:
Physical Inventory is a business process in which physical stock is matched with book (system) stock. It is legal requirement to carry out physical inventory at least once in a year.
Physical inventory can be carried out both for a companyu2019s own stock (Unrestricted, Quality, Blocked Stock) and for special stocks (Customer Consignment stock, Vendor consignment stock from vendor, Returnable packaging). This inventory is carried out saperately for both type of stocks.
Physical Inventory Processes:
Several inventory processes available for physical inventory which includes as follow:
1. Periodic Physical Inventory
o All stocks of the company are physically counted on the balance sheet key date
o Every material must be counted
o Entire warehouse must be blocked for material movements during count.
2. Continuous Physical Inventory
o Stocks are counted continuously during the entire fiscal year.
o It is important to ensure that every material is physically counted at least once during the year.
3. Cycle Counting
o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
4. Inventory Sampling
o Randomly selected stocks of the company are physically counted on the balance sheet key date.
o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
Physical Inventory Process Cycle Flow
1. Creation of physical inventory document
- Physical inventory document(s) is created individually or using the batch program, click for more information
- The transaction codes for creation physical inventory are as follow
Individual Inventory documentation creation
MI01 - Individual physical inventory creation
MIS1 - Inventory Sampling document creation
MICN - Cycle count inventory document creation
Collective Inventory document creation
MI31 - Own stock without special stock
MIK1 - Vendor consignment
MIQ1 - Project stock
MIM1 - Returnable Transpiration material
MIW1 - Customer Consignment stock
MIV1 - Returnable material with customer
MIO1 - Material provided to Vendor (Subcontracting material)
2. Print physical inventory document
- Physical Inventory document can be printed based on the physical inventory document status and or item status
- Transaction code MI21 is used to print the inventory document where print default value can be populated
3. Count the physical stock
- Based on the inventory document printout, the warehouse person will check the stock of material physically and note that on print out. This is completely physical process.
4. Enter count in system
- On completion of physical count, the count result is needs to be entered in the system. This can be with reference (using Tcode MI04) or without reference (using Tcode MI04) to the physical inventory document.
- If count quantity for that material is ZERO then select ZC (zero count) column instead of putting 0 in qty field. If 0 is used for zero count then systm will consider that as "not counted"
5. Analyze difference
- Once count is posted in the system, difference analysis can be carried out using transaction MI20
- The output gives information based on the input criteria i.e. physical inventory document, plant, material etc.
- The output gives information about the book quantity, Counted quantity, difference in quantity and value.
- From this output list, you can carry out further process ie initiate recount, change count quantity, post difference
6. Initiate recount and follow the steps 3,4,5
- If found unacceptable difference, recount is initiated using directly from difference analysis list (transaction code MI20) or using transaction code MI11.
- New inventory document will be created for selected items or for entire document
- The original document items will be deactivated once recount is initiated so original document will not be available for further process.
- On initiating recount, you need to process same as for new count document.
7. Post the difference
- Several options are available for posting difference
- Post difference after count is posted using transaction code MI07
- Posting the count and inventory differences using transaction code MI08, here you have created physical inventory but not counted so with this you can count and post difference in sinle step.
- Entering the count without a document reference using trasnaction code MI10, with this you can create inventory document, enter the count and post difference in single step.
some more points for posting difference
- Posting period must be open to post inventory difference.
- The fiscal year is set by specifying a planned count date when creating a physical inventory document.
- Tolerence to crear difference per user group can be set in customization.
- The system will generate material document for the difference qty and post the value to appropriate account (for valuated stock)
- The movement type in material document will be 701 or 702 based on gain or loss of material.
Serial Numbers in Physical Inventory
If material is managed with serial number then it is possible to carry out physical inventory for material with serial number. There are some pre-requisite before you carry out physical inventory for serialized materials.
- Serial number profile must be maintained in the material master.
- the serialization procedure MMSL (maintaining goods receipt and goods issue documents) has to be assigned to serial number profile.
- The stock check indicator in the serial number profile should be configured.
- Maintain basic settings for the serial numbers in customization for Serial Number Profile.
- Configure serial number management for physical inventory in the Settings for Physical Inventory step in Customizing for Inventory Management.
Blocked Stock Returns are the stock which is return stock from Customer or the stock which can be return back to vendor. To restrict the usage of this stock mostly business do transfer posting for this mateial as BLOCKED stock

PHYSICAL INVENTORY.Urgent.

Hi experts
gud morng to all.
Can anubody explain me..?
1.What is Physical inventory.
2.Why we are doing P.I in company.
2.What is need of Physical inventory in Company.
3.Please explain me overview abt Physical inventory in SAP with T.codes with som examples.
Thanks
sap-mm

Physical Inventory:
Physical Inventory is a business process in which physical stock is matched with book (system) stock. It is legal requirement to carry out physical inventory at least once in a year.
Physical inventory can be carried out both for a companys own stock (Unrestricted, Quality, Blocked Stock) and for special stocks (Customer Consignment stock, Vendor consignment stock from vendor, Returnable packaging). This inventory is carried out saperately for both type of stocks.
Physical Inventory Processes:
Several inventory processes available for physical inventory which includes as follow:
1. Periodic Physical Inventory
o All stocks of the company are physically counted on the balance sheet key date
o Every material must be counted
o Entire warehouse must be blocked for material movements during count.
2. Continuous Physical Inventory
o Stocks are counted continuously during the entire fiscal year.
o It is important to ensure that every material is physically counted at least once during the year.
3. Cycle Counting
o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
4. Inventory Sampling
o Randomly selected stocks of the company are physically counted on the balance sheet key date.
o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
Physical Inventory Process Cycle Flow
1. Creation of physical inventory document
- Physical inventory document(s) is created individually or using the batch program, click for more information
- The transaction codes for creation physical inventory are as follow
Individual Inventory documetion creation
MI01 - Individual physical inventory creation
MIS1 - Inventory Sampling document creation
MICN - Cycle count inventory document creation
Collective Inventory document creation
MI31 - Own stock without spcial stock
MIK1 - Vendor consignment
MIQ1 - Project stock
MIM1 - Returnable Transporation material
MIW1 - Customer Consignment stock
MIV1 - Returnable material with customer
MIO1 - Material provided to Vendor (Subcontracting material)
2. Print physical inventory document
- Physical Inventory document can be printed based on the physical inventory document status and or item status
- Transaction code MI21 is used to print the inventory document where print default value can be populated
3. Count the physical stock
- Based on the inventory doucmen printout, the warehouse person will check the stock of material physically and note that on print out. This is completely physical process.
4. Enter count in system
- On completion of physical count, the count result is needs to be entered in the system. This can be with reference (using Tcode MI04) or without reference (using Tcode MI04) to the physical inventory document.
- If count quantity for that material is ZERO then select ZC (zero count) column instead of putting 0 in qty field. If 0 is used for zero count then systm will consider that as "not counted"
5. Analyze difference
- Once count is posted in the sytem, difference analysis can be carried out using trasnaction MI20
- The output gives information based on the input criteria i.e. physical inventory document, plant, material etc.
- The output gives information about the book quantity, Counted quantity, difference in quantity and value.
- From this output list, you can carry out further process ie initiate recount, change count quantity, post difference
6. Initiate recount and follow the steps 3,4,5
- If found unacceptable difference, recount is initiated using directly from difference analysis list (transaction code MI20) or using transaction code MI11.
- New inventory document will be created for selected items or for entire document
- The original document items will be deactivated once recount is initiated so original document will not be available for further process.
- On initiating recount, you need to process same as for new count document.
7. Post the difference
- Several options are available for posting difference
- Post difference after count is posted using transaction code MI07
- Posting the count and inventory differences using transaction code MI08, here you have created physical inventory but not counted so with this you can count and post difference in sinle step.
- Entering the count without a document reference using trasnaction code MI10, with this you can create inventory document, enter the count and post difference in single step.
some more points for posting difference
- Posting period must be open to post inventory difference.
- The fiscal year is set by specifying a planned count date when creating a physical inventory document.
- Tolerence to crear difference per user group can be set in customization.
- The system will generate material document for the difference qty and post the value to appropriate account (for valuated stock)
- The movement type in material document will be 701 or 702 based on gain or loss of material.

How to adjust vendor consignment stock

Hello
We have one material , that material is having one scheduling agreement (consignment), in 2003 he was received 3600 qty, that is shown in Purchase order history of Scheduling agreement, with 101 movement type and material document.
when we saw now the stock in MMBE the 1800 qty is showing as vendor consignment.
Now user says that, he has no any vendor consignment stock physicaly. now it is showing as 1800 qty vendor consignment.
I have checked in MB51 there is no documents from 2003 it is showing only 2004 onwards
if i suppose willing to scrapp then we need to take it as Unresticted stock, then Accounting document generates.
if i want to cancel old material document , then this document is not exist of 2003
How to remove the Vendor consignment stock? now
sap

Hi,
They has not been done tranfer posting consignment to own(411k) and issues.Thats y stock is still avilabe.So user have to do these things in sap.
If you want to do stock is nil without these things do Physical inventory but it is not advisable.
Regards,
Murali

Physical inventory

Dear All,
When I created physical inventory document by using MI31 some batches were not picked in the inventory documant.But other batches are been picked for the same material.
I checked the batch characters in MSC3N it is same for both the batches.
Can any one tell me why system dint pick other batches of the same materail.
Thanks in advance,
With Rgds,
Babu

Physical Inventory Processes:
Several inventory processes available for physical inventory which includes as follow:
1. Periodic Physical Inventory
o All stocks of the company are physically counted on the balance sheet key date
o Every material must be counted
o Entire warehouse must be blocked for material movements during count.
2. Continuous Physical Inventory
o Stocks are counted continuously during the entire fiscal year.
o It is important to ensure that every material is physically counted at least once during the year.
3. Cycle Counting
o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
4. Inventory Sampling
o Randomly selected stocks of the company are physically counted on the balance sheet key date.
o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
Hi
Physical Inventory Process Cycle Flow
1. Creation of physical inventory document
- Physical inventory document(s) is created individually or using the batch program, click for more information
- The transaction codes for creation physical inventory are as follow
Individual Inventory documentation creation
MI01 - Individual physical inventory creation
MIS1 - Inventory Sampling document creation
MICN - Cycle count inventory document creation
Collective Inventory document creation
MI31 - Own stock without special stock
MIK1 - Vendor consignment
MIQ1 - Project stock
MIM1 - Returnable Transpiration material
MIW1 - Customer Consignment stock
MIV1 - Returnable material with customer
MIO1 - Material provided to Vendor (Subcontracting material)

Vendor consignment pick up value when doing stock count

Hi experts!
I'm seeking your kindness to help me solve a problem.My client has done a stock count of vendor consignment stock.But why the system pick up the value of the stock when they do adjustment to the system which this item should not have any value as it was under vendor consignment?
When i go to MI20 to check display the list of inventory differences,there's 1200kg with total price rm5146. the qty suppose to be no value but why there's 1200kg in booking?
Any idea? your help is much much appreciated..

Hi Pardeep,
I still can't solve this problem.. Please help me.
My client did stock count for vendor consignment stock. The problem is the system pick up value when she did that. It suppose to be no value since it's not their stocks. but then i notice that there's a posting via mvt type 702 at the same day. i suspect she did not freez the invetory book during stock count. So now she doesn't want the value to be picked up. What can i do to solve this? Should i advise her to do reverse mvt type - 701? Please help me ASAP..

Warehouse Management - physical inventory

Hi All,
Can any body pleasae provide me the entire process of physical inventory count at Wm level.
Thanks
Sunny.

Hi Sunny,
Physical Inventory Processes:
Several inventory processes available for physical inventory which includes as follow:
1. Periodic Physical Inventory
o All stocks of the company are physically counted on the balance sheet key date
o Every material must be counted
o Entire warehouse must be blocked for material movements during count.
2. Continuous Physical Inventory
o Stocks are counted continuously during the entire fiscal year.
o It is important to ensure that every material is physically counted at least once during the year.
3. Cycle Counting
o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
4. Inventory Sampling
o Randomly selected stocks of the company are physically counted on the balance sheet key date.
o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
Physical Inventory Process Cycle Flow
1. Creation of physical inventory document
Physical inventory document(s) is created individually or using the batch program, The transaction codes for creation physical inventory are as follow
Individual Inventory documentation creation
MI01 - Individual physical inventory creation
MIS1 - Inventory Sampling document creation
MICN - Cycle count inventory document creation
Collective Inventory document creation
MI31 - Own stock without special stock
MIK1 - Vendor consignment
MIQ1 - Project stock
MIM1 - Returnable Transpiration material
MIW1 - Customer Consignment stock
MIV1 - Returnable material with customer
MIO1 - Material provided to Vendor (Subcontracting material)
2. Print physical inventory document
Physical Inventory document can be printed based on the physical inventory document status and or item status
Transaction code MI21 is used to print the inventory document where print default value can be populated
3. Count the physical stock
Based on the inventory document printout, the warehouse person will check the stock of material physically and note that on print out. This is completely physical process.
4. Enter count in system
On completion of physical count, the count result is needs to be entered in the system. This can be with reference (using Tcode MI04) or without reference (using Tcode MI04) to the physical inventory document.
If count quantity for that material is ZERO then select ZC (zero count) column instead of putting 0 in qty field. If 0 is used for zero count then systm will consider that as "not counted"
5. Analyze difference
Once count is posted in the system, difference analysis can be carried out using transaction MI20
The output gives information based on the input criteria i.e. physical inventory document, plant, material etc.
The output gives information about the book quantity, Counted quantity, difference in quantity and value.
From this output list, you can carry out further process ie initiate recount, change count quantity, post difference
6. Initiate recount and follow the steps 3,4,5
If found unacceptable difference, recount is initiated using directly from difference analysis list (transaction code MI20) or using transaction code MI11.
New inventory document will be created for selected items or for entire document
The original document items will be deactivated once recount is initiated so original document will not be available for further process.
On initiating recount, you need to process same as for new count document.
7. Post the difference
Several options are available for posting difference
Post difference after count is posted using transaction code MI07
Posting the count and inventory differences using transaction code MI08, here you have created physical inventory but not counted so with this you can count and post difference in sinle step.
Entering the count without a document reference using trasnaction code MI10, with this you can create inventory document, enter the count and post difference in single step.
Hope it helps!
Preethi.
Edited by: preethi R on Nov 25, 2008 12:54 PM

Type of Physical Inventory

Dear All,
            how many type of Physical Inventory we can do in SAP.Please explain in detials & also Steps(T-code).
Regards
Pavan

Hi,
Physical Inventory Locate the document in its SAP Library structure
Purpose
This component allows you to carry out a physical inventory of your companys warehouse stocks for balance sheet purposes. Various procedures can be implemented for this.
Scope of Functions
In the SAP system, a physical inventory can be carried out both for a companys own stock and for special stocks. Inventory for a companys stock and for special stocks (such as consignment stock at customer, external consignment stock from vendor, or returnable packaging) must be taken separately (in different physical inventory documents), however.
Note that the blocked stock returns and the stock in transfer cannot be inventoried. If these stocks are still to be counted in a physical inventory, you must transfer post these stocks to other stocks capable of inclusion in a physical inventory.
The stock in a warehouse can be divided into stock types. In the standard system, a physical inventory can be carried out for the following stock types:
·        Unrestricted-use stock in the warehouse
·        Quality inspection stock
·        Blocked stock
Note
If batch status management is active, the first stock type covers both unrestricted-use stock and restricted-use stock.
Inventory of all stock types mentioned can be taken in a single transaction. For the materials to be inventoried, one item is created in the physical inventory document for every stock type.
Physical inventory takes place at storage location level. A separate physical inventory document is created for every storage location.
If a material does not exist in a storage location, this means that no goods movement has ever taken place for the material in the storage location. The material, therefore, has never had any stock in this storage location. The material does not exist at stock management level in the storage location. It is therefore not possible to carry out a physical inventory for the material in this storage location.
This is not to be confused with a material for which a goods movement has taken place and for which the stock balance is currently zero. A physical inventory must be carried out in this case, since storage location data is not deleted when the stock balance is zero.
Physical Inventory Procedures
The SAP System supports the following physical inventory procedures:
·        Periodic inventory
·        Continuous inventory
·        Cycle counting
·        Inventory sampling
Periodic Physical Inventory
In a periodic inventory, all stocks of the company are physically counted on the balance sheet key date. In this case, every material must be counted. During counting, the entire warehouse must be blocked for material movements.
Continuous Physical Inventory
In the continuous physical inventory procedure, stocks are counted continuously during the entire fiscal year. In this case, it is important to ensure that every material is physically counted at least once during the year.
Cycle Counting
Cycle counting is a method of physical inventory where inventory is counted at regular intervals within a fiscal year. These intervals (or cycles) depend on the cycle counting indicator set for the materials.
The Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
Inventory Sampling
In Structure link MM Inventory Sampling, randomly selected stocks of the company are physically counted on the balance sheet key date. If the variances between the result of the count and the book inventory balance are small enough, it is presumed that the book inventory balances for the other stocks are correct.
Updating the Logistics Information System (LIS)
The physical inventory is connected to the Logistics Information System (LIS). When inventory differences are updated in the LIS, they are displayed both on a quantity and on a value basis. The physical inventory items are aggregated at inventory number level, plant level, storage location level, and material level. If you need more detailed information on the inventory differences in the LIS, you can access the list of inventory differences directly from the LIS and continue the analysis at item level.
Restrictions
The posting of physical inventory differences is subject to certain time constraints:
·        The posting period is automatically set during counting. Therefore, the inventory difference must be posted to the same period or - if postings to the previous period are allowed - in the following period.
·        The fiscal year is set by specifying a planned count date when creating a physical inventory document. All subsequent postings to this document must take place in this fiscal year and/or in the first period of the following fiscal year, if postings to the previous period are allowed.

Physical Inventory user guide

Anybody has physical inventory user guide with all transction details ?

Physical Inventory:
Physical Inventory is a business process in which physical stock is matched with book (system) stock. It is legal requirement to carry out physical inventory at least once in a year.
Physical inventory can be carried out both for a companys own stock (Unrestricted, Quality, Blocked Stock) and for special stocks (Customer Consignment stock, Vendor consignment stock from vendor, Returnable packaging). This inventory is carried out saperately for both type of stocks.
Physical Inventory Processes:
Several inventory processes available for physical inventory which includes as follow:
1. Periodic Physical Inventory
o All stocks of the company are physically counted on the balance sheet key date
o Every material must be counted
o Entire warehouse must be blocked for material movements during count.
2. Continuous Physical Inventory
o Stocks are counted continuously during the entire fiscal year.
o It is important to ensure that every material is physically counted at least once during the year.
3. Cycle Counting
o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
4. Inventory Sampling
o Randomly selected stocks of the company are physically counted on the balance sheet key date.
o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
Physical Inventory Process Cycle Flow
1. Creation of physical inventory document
- Physical inventory document(s) is created individually or using the batch program, click for more information
- The transaction codes for creation physical inventory are as follow
Individual Inventory documetion creation
MI01 - Individual physical inventory creation
MIS1 - Inventory Sampling document creation
MICN - Cycle count inventory document creation
Collective Inventory document creation
MI31 - Own stock without spcial stock
MIK1 - Vendor consignment
MIQ1 - Project stock
MIM1 - Returnable Transporation material
MIW1 - Customer Consignment stock
MIV1 - Returnable material with customer
MIO1 - Material provided to Vendor (Subcontracting material)
2. Print physical inventory document
- Physical Inventory document can be printed based on the physical inventory document status and or item status
- Transaction code MI21 is used to print the inventory document where print default value can be populated
3. Count the physical stock
- Based on the inventory doucmen printout, the warehouse person will check the stock of material physically and note that on print out. This is completely physical process.
4. Enter count in system
- On completion of physical count, the count result is needs to be entered in the system. This can be with reference (using Tcode MI04) or without reference (using Tcode MI04) to the physical inventory document.
- If count quantity for that material is ZERO then select ZC (zero count) column instead of putting 0 in qty field. If 0 is used for zero count then systm will consider that as "not counted"
5. Analyze difference
- Once count is posted in the sytem, difference analysis can be carried out using trasnaction MI20
- The output gives information based on the input criteria i.e. physical inventory document, plant, material etc.
- The output gives information about the book quantity, Counted quantity, difference in quantity and value.
- From this output list, you can carry out further process ie initiate recount, change count quantity, post difference
6. Initiate recount and follow the steps 3,4,5
- If found unacceptable difference, recount is initiated using directly from difference analysis list (transaction code MI20) or using transaction code MI11.
- New inventory document will be created for selected items or for entire document
- The original document items will be deactivated once recount is initiated so original document will not be available for further process.
- On initiating recount, you need to process same as for new count document.
7. Post the difference
- Several options are available for posting difference
- Post difference after count is posted using transaction code MI07
- Posting the count and inventory differences using transaction code MI08, here you have created physical inventory but not counted so with this you can count and post difference in sinle step.
- Entering the count without a document reference using trasnaction code MI10, with this you can create inventory document, enter the count and post difference in single step.

701 K Physical inventory Vendor Consignment

Similar Messages

Maybe you are looking for