701 Mail, Calendar, Social network and Web bug.

Hello
im pretty satisfied with my 701 but just right now i started to experience bugs. let me explain
Calendar- sometime (always when i go through widget) when i open a calendar, it opens a speciffic day (the one that is actual), and im unable to select month or any other view point, and i cannot see any of my notes in the calendar until i restart my phone.
Mail- widget sometimes doesnt refresh inbox even though i have it set on 15 mins. (happend last time for a week. thought i had no mail, instead i found 10 new messages.) also sometimes my mailbox wont open using widget, only with a normal Email icon.
Social network just doesnt want to open at all. says (in translation something like "Unable to launch the client"
Web- even though i have 3g network signal and mobile data are turned ON, opera mobile, and Web client (the nokia one) both cannot connect to the internet for some time.
i tried backing up my phone data (not applications only galery, phonebook, music, ebooks etc and videos) and erasing (reseting) my settings. when i turned my phone on again, it asked me to enter time, date, my nokia account etc. as if i just bought the phone. then i loaded my backup files. email looks like its working again, calendar got stuck just today again... social network still doesnt work, web still cannot connect to 3g network sometimes..
dunno what else to try, starting to be little angry, since calendar and web are the things i use more often then sms and calls.
is this common? will there be an update to fix this? or is there a simple solution to my prob?
i would add an attachment supplying info about my phone but i have no idea where to get such file.
thanks for help.
Solved!
Go to Solution.

No problems here!
Any way the Feature Pack 1 will solve those problems ...

Similar Messages

Nokia 5800 Social Network and Internet/Email conce...

Having owned the Nokia 5800 XpressMusic for a couple of months or so, I must say that I really like the phone and it has great functionality.
My main concerns/issues however are outlined below:
1. Facebook for Nokia app is slow, does not show all of the functions that m.facebook.com shows and isn't a homescreen widget (e.g. push notifications)
2. Communities app is even slower and again does not have the functionality of m.facebook.com and doesn't show notifications at all!
3. The Nokia Messaging app insists on connecting to 3G all the time, rather than a wifi connection when available. I've also experienced intermittent issues when trying to connect (sometimes it stays offline and even selecting 'Go online' doesn't wake the program up).
4. Default web browser keeps crashing and doesn't support larger websites (I experience intermittent crashes as well as memory issues). I do not receive such issues in Opera Mobile. I also dislike the defaulting to full screen mode all the time. If you turn full screen off, as soon as you navigate to a different page it goes back to full screen again, therefore increasing the activity on the phone and it takes longer to load the page before you can scroll or click another link.
I think I've covered all of my main concerns but in essence this device really needs better app support and social networking integration.
I would be grateful if I could be given an update on if/when we can expect to receive such support.
If anyone else agrees, please indicate below along with any additional feature requests relating to this topic.
Thank you for your time in reading this post.

bump
Same issues here, facebook is almost unuably slow (it's quicker to boot up the laptop!)
Messeging will not use wifi and i have a limited data plan so can't use it for attachments.
Web browser randomly exits for no reaseon and the lack of width adjustment is infuriating
Now ovi store's won't let me download!

Block or Quarantine e-mail from Social Networks

Is there some option how can I block all e-mail messages from all knows Social Networks (facebook, google+, infoaxe, myspace...)
Or at least all auto sended e-mail like
Is [email protected] you friend...
or
[email protected] has indicated you're a frined. Accept?
and so on
I lower spam filter on Suspected Spam score 40 and it doesent catch them.
How to block this kind of SPAM messages?
Also how to block low volume SPAM messages from gmail that are selling things and self promotions?

Hello Juraj,
Have you tried to enable marketing mail?
Marketing Email is a mode of promoting products and services via Email. Even though marketing messages are not considered spam, your organization or end-users may not want to receive them. Marketing messages are messages that are NOT Spam, do NOT contain Email transactions and does NOT reflect communication between parties. Example of a Marketing message is an Airline promoting their products and services via an Email but an Airline confirmation email to a user is not a marketing message.
What is Marketing Detection and How it works?
In AsyncOS 7.0.x for Email and above Cisco IronPort has introduced a new feature Unwanted Marketing Message Detection. When enabled along with IronPort Anti-Spam or IronPort Intelligent Multi-Scan this feature can distinguish between Spam and Unwanted Marketing Messages. Like spam, you have the option to deliver, drop or bounce unwanted marketing messages. You also have the option to tag unwanted marketing messages by adding text to the message’s subject to identify it as marketing.
The Unwanted Marketing Message Detection feature in AsyncOS for Email can be configured via Per Recipient Policies for Anti-Spam. The Marketing Detection feature like Anti-Spam configuration allows you to drop, deliver or bounce after a message is detected as Marketing Email. For better detection and low False Positive rate it is highly recommended to use the "Tag and Deliver" action after a message is detected as Marketing Email by IronPort Anti-Spam or IronPort Intelligent Multi-Scan.
Cisco IronPort highly recommends customers to take advantage of this new Marketing Detection feature to detect Unwanted Marketing Email and enhance the end user Email experience.
How do you enable it?
    Go to Mail Policies -> Incoming Mail Policies
    Select the link under Anti-Spam for your Default mail policy
    Under 'Marketing Email Settings' select 'Yes' for 'Enable Marketing Email Scanning'
    Select the desired action under 'Apply This Action to Message'
    Submit your changes
    Repeat steps 2 to 5 for any other applicable mail policies.
    Commit your changes.

My HP 6500A Plus is connected to wireless network and web services but won't print email or code

I have my HP 6500A Plus connected to my wireless network and it is registered on the HP Web Services but it will not print the printer email address or code. I have followed the directions. I would appreciate your help in this matter. Dave

Hey ddwilson9999,
If your printer is telling you that it cannot connect to the server, try these steps.
1. Find your printer's IP address by printing a network configuration page.
2. Type you IP address into the address bar of your web browser.
3. Click on the network tab at the top of the page.
4. Look at the left hand side and click IPv4 under wireless.
5. Change the IP settings to Manual.
6. Enter the printer's IP address, your subnet mask, and your routers IP address or default gateway in the spaces.
7. Set the Preferred DNS to 8.8.8.8.
8. Set the Alternate DNS to 8.8.4.4.
9. Click apply.(You may need to refresh the page if it says processing for longer than a min and click apply again.)
10. Now try to print the information page.
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

Nokia 701 menu button not working and other bugs

I have a "brand new" 701 with 111.020.0307 that won't update to 111.030.0609 because I'm in Italy .
Now I have a really annoying bug: the menu key, sometimes, stops working and won't bring up the menu if pressed briefly, and won't bring up the task list either (when pressed long).
Anyone experiencing this bug? The only way I found to make it work again is turn off and on again my phone... And the task list can't be found in menus, AFAIK. I could do that with my old 5800XM...
I bought my phone ONE WEEK ago... I really wouldn't like to format/reinstall already! Ideas?

soft reset may solve it. Look in settings and phone management.
Dont have to do a hard reset first. After soft reset, try reinstall the latest firmware through nokia suite if soft reset didnt solve your problem..
I have 701 and I am impressed overall with the device. Actually... I am very pleased with it.
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

Network and web simultaneous connections

Hi,
I am planning to buy Mac Pro to use as Server (actually we are using Windows XP Pro computer as server). We already check to buy a Dell PowerEdge SC1430 and Windows Server 2003, but now I am considering replace with Mac Pro.
My question is, with 10-user licenses, can I connect 10 Networks users at same time, but what about Web connections?. Can anyone tell me the limit of Web connections for 10-user license?
Simon

Server AD forum:
http://discussions.apple.com/category.jspa?categoryID=96
http://www.apple.com/support/macosxserver/
I can't see it limiting the number of web connections.

Z77A-GD65 network and audio bugs

I'm having a few weird issues with my setup.
first off its a Z77A-GD65 bios v10.7
i7-3770K CPU @ 3.50GHz, 4201 Mhz with noctua NH-D14
Corsair Vengeance 16GB (2x8GB) DDR3 1600 MHz (PC3 12800) Desktop Memory (CMZ16GX3M2A1600C10) win says that there is only 3.9g available, and that its only running at 800 mhz
Samsung 840 Pro Series 2.5-Inch 128 SATA 6.0 gb/s ssd
WD Black Desktop 1TB SATA 6.0 GB/s 7200 RPM
win 8
first issue just appeared out of nowhere a week after I finally got it running. There is a network error every time I start the system, if I restart it goes away.
I"m having audio problems, the speakers in my monitor work with the hdmi cable, but I am unable to use my good speakers, when I plug them into the back panel line out, there is no audio from any port, or the hdmi cable.
I've also noticed a device without a driver error

win8 is a 32b version, it was a 39.95 upgrade directly from microsoft... safe to assume that the 64b version is worth the extra $?
have the board in a brand new case using 9 stand offs, all with screws through the board and into them.
The NIC is onboard, all the drivers are up to date except the audio, I'm downloading an updated driver for it (released 1/25/13)
left the machine turned on when I went to bed, when I got up the power led was blinking, and I had to press the power button to wake the machine. this web page was open, but there was no network available, same error as above, I had to restart windows to get online.
Edit: the updated driver fixed the audio problem

Mail, Calendar, Weather, News, and maybe other modern apps are crashing after updating from 10061 to 10074.

I don't remember these issues in the announcement of the build. Any help?
Spartan crashes sometimes too, but not like these. These can't even start.
Funny thing is that tech support app crashes as well.

JK
There is a known issue with the people app but none for the others . You may want to uninstall the mail calender, people apps using powershell as they did in 41 and then re-install them.You may want to run a system file check to verify the state of
the OS
Please run a system file check (SFC) & DISM if you are on win 8 or higher
All instructions are in our Wiki article below...
Should you have any questions please ask us.
System file check (SFC) Scan and Repair System
Files
Wanikiya and Dyami--Team Zigzag

Having trouble with social networks and connection issues

My iPad won't load any pictures on facebooks website, or the app. It will load google pictures but on Facebook they come up as a blue question mark and it also won't let me log into intagram or snapchat, it says check your network connection. Also my app store won't load. Is there anyway to fix this? I restarted my iPad multiple times and cleared all cookies and data but it didn't help. I had a provisioning profile from an GBA emulator awhile back and I deleted the emulator but not the profile. I recently tried to download the emulator again and this is when problems started. I deleted the profile but nothing seems to work. I have an IPad 2, is there anyway to fix this without going to Apple? I'm not good with all this tech stuff

Your post indicates you have used Cydia, which is a software application for iOS that enables a user to find and install software packages on jailbroken iOS Apple devices. Since your iPad has been jailbroken, we can't help you in this forum. Best bet is to Google for answers.
Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issues
http://support.apple.com/kb/HT3743
If you jailbreak your iPad:
1. Your Apple warranty, if any is remaining, is canceled.
2. We can't help you in these forums.
3. Apple Support and the Genius Bar won't help you.
4. You can get a virus and malware.
5. You may "brick your iPad and have an $$$ paperweight.
What is Jailbreaking iOS? Should I do it?
http://tinyurl.com/mn5umca
 Cheers, Tom

N8 Social Network Problem! HELP ME

hi, i have a Nokia N8,
when i open the social software on my phone , i just see an "add social network" and when i open that, just see a page that show" Select community" but the list is empty and blank page.
pls help me, i unistal and renistal this app but my prob isnt solved.
tnx for your help.
Attachments:
IMG_0001.jpg ‏245 KB

I have the soloution
Just follow the steps
> unsitall the ovi ovi socal from your phone and restar the devise the you have to download the old version of ovi socal
You will get the old ovi socal me you have to mail me at- i will send you the application
Then install it Your problem is solve
If have any quries or qustions just mail me
Anurag
Moderator's Note:
Personal details removed by a moderator. We kindly ask you not to share your personal contact details or your phone's IMEI number publicly on this forum. This is for your personal safety and privacy.

Apple's Social Network?

Hello again,
I am looking to leave Facebook, especially since it will be owned by or already is owned by microsoft. I am interested in locating Apple's own Social Network, I am aware of our very own "Ping" for music.
Thank you again for any assistance in this area.
Mohegan

Thank you everyone for responding. To clarify my recent comment about Microsoft taking over or possible buying out Facebook or even helping FB. I read so many articles and misspoke myself and here is one article I read about this.
http://www.zdnet.com/search?q=facebook+being+sued+
I will clarify next time, for this is how I would like it to be, however I am still in favor of an Apple Social Network and will support any effort in this regard...
Mohegan

Problems with mail, messags, and social network accounts

Hi,
first of all, sorry for my bad English.
I would like to know if there is a maximum limit of accounts (email, social network, etc. etc.) that OS10 can handle.
On my Passport (OS10 Version 10.3.0.675) I have the following:
- 1 BBM
- 1 WhatsApp
- 1 Facebook
- 12 Mail
Now, when I try to insert another account (for example mail or Twitter), I recived the following error message:
"The maxximum accounts has been reached".
Is that right?
With the Z10 and the Q10, if I remember correctly, I did not have this problem.
I need to add more email accounts, someone can help me?
Thank you all.
I'M NOT LAZY,
I JUST DON'T GIVE NOTHING!

Let me see what I can find out and I'll get back to you when I know more! Thanks
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog

HT4628 My Mac mini has decided to continuously drop off my wifi network and is incredibly slow to open a web page. Wifi is working perfectly with other devices.

Hi my Mac mini will not stay on the network today and is slower than a pc to lad a web page.
I've followed various suggestions off the web and still have the same problem. 1 second the network is available and working slow and the next it says in network diagnostics that ISP has failed. The router is fine as I'm using an iPad and iPhone and all is working perfectly at +5 Mbps however when I try to open yahoo in safari it take about 5 minutes to open the page and then when I try to create a new mail I get the same Tim delay and then can't enter a send to address!
I've never managed to sort out email either but it not for a lack of trying about 30 different suggestions.
I'm fairly new to mac and am getting very very frustrated with not being able to solve these problems.
Can anyone please steer me towards a step by step or screen by screen resolution please please please help?

Please answer as many of the following questions as you can. You may already have answered some of them; in that case, there's no need to repeat the answers.
Restart your router and your broadband device, if they're separate. Any change?
If possible, connect to your router with an Ethernet cable and turn off Wi-Fi. Any difference?
Are any other devices on the network, and if so, are they the same?
If you can connect to more than one network, are they all the same?
Are all network applications affected, or only some? If only some, which ones?
Is networking always the same, or is the problem intermittent?
Disconnect all other devices from the network. Any change?
Boot in safe mode and test. Any difference?
If possible, turn off Bluetooth and disconnect any USB 3 devices. Any difference?

Apple Mail on Macbook via windows domain network and microsoft TMG

Hi folks.
We run a windows network with server 2008 tmg, dcs, and exchange 2007.
We have a few mac clients on our internal network. They log on locally but have all the correct network settings etc for proxy, network and internet access. Everything works fine through TMG including apple mail to our exchange server, and web browsing etc.
The one thing that isn't working is apple mail to other mail providers. Specifically Gmail.
I've created an access rule for testing purposes to allow all outbound traffic from a macbook pro. It still doesn't work, with the following being the only error:
Denied Connection RHSTMG 21/05/2010 10:27:07
Log type: Firewall service
Status: An ingoing packet was dropped because its destination address does not exist on the system, and no appropriate forwarding interface exists.
Rule: None - see Result Code
Source: Internal (10.1.0.81:5353)
Destination: External (224.0.0.251:5353)
Protocol: Unidentified IP Traffic (UDP:5353)
Additional information
•Number of bytes sent: 0 Number of bytes received: 0
•Processing time: 0ms Original Client IP: 10.1.0.81
Someone on another (microsoft) forum said this:
224.0.0.251:5353 is RendezVous protocol, which is used by Mac OS for locating services. it is multicast protocol and it's only purpose is locating things.most it has nothing to do with Google Mail.
The mac has entirely unrestricted access to everywhere (in theory).
Gmail account through windows 7 client using outlook is fine by the way.
Nothing else is denied or refused when looking at the live logging.
Any help with this would be great.
Thanks
Dave

I had this problem too, but I found a post burried on the web that said to add " p06- " (without quotes) before the imap and smpt server names and that worked:
p06-imap.mail.me.com
p06-smtp.mail.me.com
Everything stays checked, SSL for both, authentication and use same username and password checked.

Setting Up Mailserver to received and Send Mail for external Network

I have a G5 currenty running 10.3.9 Server with Mail services run and working fine, we are upgrading to 10.4 Server and would like our Sales Reps the ability to send and Receive mail from outside the office. How do I configure my server, Router, ISP and/or Mail clients to do this??? we are currently able to recieve mail from outside just not send.

I cannot find the Line #submission inet n - n -- smtpd in the Main.CF file...here is what I get when I open it
# Global Postfix configuration file. This file lists only a subset
# of all 250+ parameters. See the sample-xxx.cf files for a full list.
# The general format is lines with parameter = value pairs. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.
# SOFT BOUNCE
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#soft_bounce = no
# LOCAL PATHNAME INFORMATION
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
queue_directory = /private/var/spool/postfix
# The command_directory parameter specifies the location of all
# postXXX commands.
command_directory = /usr/sbin
# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
daemon_directory = /usr/libexec/postfix
# QUEUE AND PROCESS OWNERSHIP
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
mail_owner = postfix
# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#default_privs = nobody
# INTERNET HOST AND DOMAIN NAMES
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#mydomain = domain.tld
# SENDING MAIL
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# [email protected].
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#myorigin = $myhostname
#myorigin = $mydomain
# RECEIVING MAIL
# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
# Note: you need to stop/start Postfix when this parameter changes.
#inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost
# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4
# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
# The default is $myhostname + localhost.$mydomain. On a mail domain
# gateway, you should also include $mydomain.
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see sample-virtual.cf).
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# sample-smtpd.cf).
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#mydestination = $myhostname, localhost.$mydomain
#mydestination = $myhostname, localhost.$mydomain $mydomain
#mydestination = $myhostname, localhost.$mydomain, $mydomain,
# mail.$mydomain, www.$mydomain, ftp.$mydomain
# REJECTING MAIL FOR UNKNOWN LOCAL USERS
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination and $inet_interfaces.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
# - You define $mydestination domain recipients in files other than
# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
# For example, you define $mydestination domain recipients in
# the $virtual_mailbox_maps files.
# - You redefine the local delivery agent in master.cf.
# - You redefine the "local_transport" setting in main.cf.
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
# feature of the Postfix local delivery agent (see sample-local.cf).
# Details are described in the LOCAL_RECIPIENT_README file.
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a [email protected] address.
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =
# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# $inet_interfaces, while $local_recipient_maps is non-empty and the
# recipient address or address local-part is not found.
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
#unknown_local_recipient_reject_code = 550
unknown_local_recipient_reject_code = 450
# TRUST AND RELAY CONTROL
# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix. See the smtpd_recipient_restrictions parameter
# in file sample-smtpd.cf.
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network. Instead, specify an explicit
# mynetworks list by hand, as described below.
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host
# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table
# The relay_domains parameter restricts what destinations this system will
# relay mail to. See the smtpd_recipient_restrictions restriction in the
# file sample-smtpd.cf for detailed information.
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
# subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace. Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction in the file sample-smtpd.cf.
#relay_domains = $mydestination
# INTERNET OR INTRANET
# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
# If you're connected via UUCP, see also the default_transport parameter.
#relayhost = $mydomain
#relayhost = gateway.my.domain
#relayhost = uucphost
#relayhost = [an.ip.add.ress]
# REJECTING UNKNOWN RELAY USERS
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a [email protected] address.
#relay_recipient_maps = hash:/etc/postfix/relay_recipients
# INPUT RATE CONTROL
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 50 SMTP server process
# limit, this limits the mail inflow to 50 messages a second more
# than the number of messages delivered per second.
# Specify 0 to disable the feature. Valid delays are 0..10.
#in_flow_delay = 1s
# ADDRESS REWRITING
# Insert text from sample-rewrite.cf if you need to do address
# masquerading.
# Insert text from sample-canonical.cf if you need to do address
# rewriting, or if you need username->Firstname.Lastname mapping.
# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
# Insert text from sample-virtual.cf if you need virtual domain support.
# "USER HAS MOVED" BOUNCE MESSAGES
# Insert text from sample-relocated.cf if you need "user has moved"
# style bounce messages. Alternatively, you can bounce recipients
# with an SMTP server access table. See sample-smtpd.cf.
# TRANSPORT MAP
# Insert text from sample-transport.cf if you need explicit routing.
# ALIAS DATABASE
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
# It will take a minute or so before changes become visible. Use
# "postfix reload" to eliminate the delay.
#alias_maps = dbm:/etc/aliases
#alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases
# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi". This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
# ADDRESS EXTENSIONS (e.g., user+foo)
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#recipient_delimiter = +
# DELIVERY TO MAILBOX
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
# "Maildir/" for qmail-style delivery (the / is required).
#home_mailbox = Mailbox
#home_mailbox = Maildir/
# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#mail_spool_directory = /var/mail
#mail_spool_directory = /var/spool/mail
# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception: delivery for root is done as $default_user.
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"
# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#mailbox_transport = lmtp:unix:/file/name
#mailbox_transport = cyrus
# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#fallback_transport = lmtp:unix:/file/name
#fallback_transport = cyrus
#fallback_transport =
# The luser_relay parameter specifies an optional destination address
# for unknown recipients. By default, mail for unknown@$mydestination
# and unknown@[$inet_interfaces] is returned as undeliverable.
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
# luser_relay works only for the default Postfix local delivery agent.
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#luser_relay = [email protected]
#luser_relay = [email protected]
#luser_relay = admin+$local
# JUNK MAIL CONTROLS
# The controls listed here are only a very small subset. See the file
# sample-smtpd.cf for an elaborate list of anti-UCE controls.
# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
# For details, see the sample-filter.cf file.
#header_checks = regexp:/etc/postfix/header_checks
# FAST ETRN SERVICE
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# By default, Postfix maintains deferred mail logfile information
# only for destinations that Postfix is willing to relay to (as
# specified in the relay_domains parameter). For other destinations,
# Postfix attempts to deliver ALL queued mail after receiving the
# SMTP "ETRN domain.tld" command, or after execution of "sendmail
# -qRdomain.tld". This can be slow when a lot of mail is queued.
# The fast_flush_domains parameter controls what destinations are
# eligible for this "fast ETRN/sendmail -qR" service.
#fast_flush_domains = $relay_domains
#fast_flush_domains =
# SHOW SOFTWARE VERSION OR NOT
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#smtpd_banner = $myhostname ESMTP $mail_name
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
# PARALLEL DELIVERY TO THE SAME DESTINATION
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter. The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.
#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 10
# DEBUGGING CONTROL
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
debug_peer_level = 2
# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain
# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
debugger_command =
PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
xxgdb $daemon_directory/$process_name $process_id & sleep 5
# If you don't have X installed on the Postfix machine, try:
# debugger_command =
# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
# >$config_directory/$process_name.$process_id.log & sleep 5
# INSTALL-TIME CONFIGURATION INFORMATION
# The following parameters are used when installing a new Postfix version.
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
sendmail_path = /usr/sbin/sendmail
# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
newaliases_path = /usr/bin/newaliases
# mailq_path: The full pathname of the Postfix mailq command. This
# is the Sendmail-compatible mail queue listing command.
mailq_path = /usr/bin/mailq
# setgid_group: The group for mail submission and queue management
# commands. This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
setgid_group = postdrop
# manpage_directory: The location of the Postfix on-line manual pages.
manpage_directory = /usr/share/man
# sample_directory: The location of the Postfix sample configuration files.
sample_directory = /usr/share/doc/postfix/examples
# readme_directory: The location of the Postfix README files.
readme_directory = /usr/share/doc/postfix
# THE FOLLOWING DEFAULTS ARE SET BY APPLE
# bind to localhost only
inet_interfaces = all
# turn off relaying for local subnet
mynetworks_style = host
# mydomain_fallback: optional domain to use if mydomain is not set and
# myhostname is not fully qualified. It is ignored if neither are true.
mydomain_fallback = localhost
myhostname = jamestownpress.com
mailbox_transport = cyrus
enable_server_options = yes
luser_relay =
maps_rbl_domains = dun.dnsrbl.net
message_size_limit = 0
mydestination = $myhostname,localhost.$mydomain
smtpd_use_tls = no
smtpd_enforce_tls = no
smtpd_tls_loglevel = 0
smtpd_sasl_auth_enable = yes
smtpd_use_pw_server = yes
smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination,permit
smtpd_pw_server_security_options = plain
server_enabled = 1
relayhost =
smtpd_client_restrictions = permit_mynetworks reject_rbl_client dun.dnsrbl.net permit
always_bcc =
mynetworks = 127.0.0.1/32,192.168.0.0/16,192.168.1.98,192.168.1.3,192.168.1.13,192.168.1.5,1 92.168.1.22,192.168.1.18,192.168.1.41
content_filter = smtp-amavis:[127.0.0.1]:10024
so what do I need to change

701 Mail, Calendar, Social network and Web bug.

Similar Messages

Maybe you are looking for