704x480 from a DVD - Messing Me Up!

I have a dvd that someone sent me and it shows as 704x480 resolution. When I play it on DVD Player, it is 4:3 aspect ratio. When I import it into FCP, it looks squished, as if 16x9. When I change the sequence settings to use the rectangular pixels (NTSC CCIR 601/DV 720x480) the aspect ratio looks correct.
The problem comes in when I try to use a motion lower third graphic. When I place it in the timeline, and render, the video squeezes over to the left a few pixels, then returns to normal after the graphic goes away. I looked at the resolution of the motion graphic, and it says 720x486. Is it shifting over the 6 extra pixels?
The graphic works fine on other video whose settings are 720x480. It is just the 704x480 videos that don't work. I tried scaling the motion graphic to 95%, but it didn't change the video squeeze.
Any ideas?
Thanks for any input,
Ken

Thanks for the tip. I actually did that with MPEG Streamclip before I got your post, and exported it to 720x480. works like a charm. Appreciate your help.
Ken

Similar Messages

Editing from VIDEO_TS dvd content...

I need to edit the content of several old DVD's. I have successfully transferred the content from all the DVD's to my hard drive. I am able to edit all of the content in Premiere normally except for the content of one particular DVD. If I drag the VIDEO_TS folder from this DVD into VLC it plays perfectly. It also, of course, plays perfectly directly off the dvd. If I drag the VIDEO_TS folder into Premiere it imports properly but the content is a mess. For example, the video clips are all truncated, the audio does not align etc.
Notes: the problem DVD is the only one that transferred to my hard drive and did not create an AUDIO_TS folder.
Any thoughts?
thanks,
chris

http://www.videohelp.com/tools/XviD4PSP

Reinstallation (Leopard ) from included dvds on external usb drive

Hi
I've run software that copies the system to a remote drive and tested booting successfully. I'm curious though how I can do an installation from the dvds that come with my macbook pro to an external drive to test the process. I'd like to see this work, then boot from it, and ensure that the system will work, that iLife is installed, and just see a vanilla benchmark. Obviously, I don't want to do this to my live system.
Thanks...

SFGREG2008 wrote:
Hi
I did try super-duper before. Yes, I think I understand, similarly if you are restoring apps etc, there is no guarantee everything would be synched properly, makes a lot more sense to reinstall your apps, and just use Time Machine to restore jpg, doc, mp3 and the like....
well, you can use TM the way you like but I can tell you from my personal experience that I absolutely love the feature to be able to do full system restore from any time in the past you have a backup for. I've done it at least 4 times already after messing up my system with some 3rd party apps and never had a problem.
However, with that said, what would you tell Time Machine to say restore all files that are missing from the backup copy if you wanted to?
Or perhaps, look through all of your backups and give me any and all mp3 files?
I see that you are not really familiar with how TM works and what it can and can not do. I would therefore highly recommend visiting the following links
[Mac 101: Using Time Machine in Mac OS X 10.5 Leopard|http://docs.info.apple.com/article.html?artnum=306681]
[Mac OS X 10.5 Help|http://docs.info.apple.com/article.html?path=Mac/10.5/en/11422.html]
[TM video|http://www.youtube.com/watch?v=o2fHdUL5GAM]
[Full system restore using TM|http://docs.info.apple.com/article.html?path=Mac/10.5/en/15638.html].
You'll understand it better that way. Post if you still have questions afterwards.
Thanks.

Grey screen won't allow me to install Leopard from install DVD

I'm trying to do a fresh installation of Leopard on my Mac Pro. I have used the Leopard install DVD previously to install to this machine when Leopard was first released and I had no problem then. Now, the machine boots and I can hear it reading from the DVD. On screen is the apple sign and the rotating symbol underneath it. After a while I hear the hard disks power down and then up again and shortly after that, the screen fills with a dark screen from top to bottom and a message says that I need to restart the machine by holding down the power button. It never gets past that point. I can boot with no problem to the current installation on hard disk, but can't do a new installation.
I've tried this with all peripherals detached. I've even tried taking out all the hard disks just ot see what happens, and I get the same problem. I've verified/repaired the hard disks and also run a repair on the security rights. No success.
I have also tried the original Tiger install disk that came with the machine and that does the same thing, so I'm beginning to assume that this is some sort of hardware issue. I've checked the console logs, and the last thing that seems to be there is a message saying:
14/04/2009 09:55:41 [0x0-0x1e01e].com.apple.systempreferences[230] Could not interpret boot device as either network or disk
The hardware diagnostics tests report no problems.
Anyone got any ideas?
Thanks

[I got a black screen telling me I had to reboot in many languages, what was it?|http://www.dslreports.com/faq/4970] Also has detailed description of what happens during a KP.
[Apple docs: What's a kernel panic? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=106227]
[Mac OS X Kernel Panic FAQ|http://www.index-site.com/kernelpanic.html]
[Topic : kmosx: Kernel Panics? Don't panic too !|http://discussions.apple.com/thread.jspa?threadID=121923]
[X-Lab: Resolving Kernel Panics|http://www.thexlab.com/faqs/kernelpanics.html]
[Tutorial: Avoiding and eliminating Kernel panics|http://www.macfixit.com/article.php?story=20060911080447777]
[Tutorial: An introduction to reading Mac OS X crash reports|http://www.macfixit.com/article.php?story=20060309075929717]
[12-Step Program to Isolate Freezes and/or Kernel Panics|http://macosg.com/group/viewtopic.php?t=800]
[Texas Mac Man's post on kernel panics|http://discussions.apple.com/thread.jspa?threadID=1723768&tstart=0]

Creating a new library from a DVD Burn library

I have my entire library of photos on my iMac in iPhoto 6.0.6. I recently spent quite a bit of time cleaning up what had been a rather messy, unorganized, photo library. My organizational method consisted of consolidating old film rolls which were inherited from original imports that were in different folders by moving groups of photos into single "film rolls" for older years and making fewer rolls for the last few years. I then went back through and corrected photo dates for a bunch of images that were scanned in, etc. I downloaded Keyword Manager, which I like a lot, and applied keywords to every photo in my collection. I also deleted a bunch of old photos which were too similar to better shots or simply not worth keeping. Once I finished all of this I had my new library consisting of 1892 pictures, which I hoped to backup and allow to serve as a "gold master copy" of all of my photos to date. In browsing the database in Finder, I noted that there were a lot of images in the "Original" folders that were not in the library. Some of these were images I had deleted in the library. (I know better than to do anything through the finder other than browse. I know that to maintain integrity of the library it is necessary to only perform actions through iPhoto.) I did a database rebuild and asked iPhoto to recover orphaned files which did nothing. I really wanted this database to be in pristine condition since I was using it as my master copy, but could not figure out how to do away with old unwanted images in the "originals" folders. I went ahead and created a DVD library with "Share -> Burn", and voila, the new iPhoto Library that was created on the DVD appeared to be "clean" with only the 1892 pictures in my viewable library existing in the Originals folder. OK, so far so good. I then took the DVD I had burned and attempted to replicate my library on my iBook which had a clean install of iLife '06 on it. When I launched iPhoto with the DVD in place it showed me an empty hard drive library and the burned library from the DVD. At first I attempted to just copy individual Film Rolls from the DVD to the local library. While this worked in bring the images over, the keywords became all jumbled. The resulting photos would have keywords attached which did not belong to them and were different from what was on the DVD. I then deleted the iBook library and tried copying the entire iPhoto Library folder from the DVD to the iBook via the Finder. When I relaunched iPhoto, presto all the photos were in my local library with keywords, film rolls and other metadata intact. However in browsing the library I came across a few photos which would cause iPhoto to crash when I tried to edit them. This was a consistent behavior on specific images. Reading through the forums I came across the color profile bug and through testing verified that this was not the problem. Meanwhile back on the iMac I could edit the photos in question with no problem. I verified that the image had not been corrupted during the DVD burn as well. The files are identical between the iMac and the iBook. I know this is a long drawn out post, but if anybody has read this far, here are my questions ...
1) What is the best way to go about creating a "clean" database with internal integrity after a doing a lot of edits and metadata changes? Shouldn't the burn to DVD do what I want?
2) How come when I copied subsets of my library over to a new machine from the DVD, the keywords seemed to get all jumbled? Is it a matter of indexing them? If I added all the keywords to an empty library before copying the images over, would it work? Is there not a way to just copy portions of a DVD library into another library?
3) Any ideas on the crash while attempting to edit problem? The image will load as a thumbnail, and then briefly flas the full size image, before iPhoto crashes and pops up a dialog asking if I want to restart it.
Thanks for staying with me!
Mark

Problems solved with iPhoto Manager's rebuild function! Thanks to Brian Webster of Fat Cat Software. Great program!
Mark

Cannot copy file from backup DVD to HD folder

Whenever I finish a project, I had burn the various files (movie, text, pictures, pages, etc.) onto DVDs to free up hard disk space for present projects. Usually, I would use a disk image to burn those DVDs. Recently, I needed material from those DVDs and I found that I could not copy them from the DVD to my work folders on my hard disk by dragging them from the DVD window to another open window. I could only do it the roundabout way of opening those files individually using the programmes (like pages, iPhoto, etc) and then use the 'Save As ...' option in the File Menu. It was a huge hassle. I then looked into my other DVDs and found that they were the same way. I find DVDs easier to manage. Is it because I am using disk images or is there something wrong in the way I burn the DVDs. Please advise

When I try to move the files from the Finder Window with the files on the DVD, I do not get the plus sign when I try to drag it to the desktop or any other window. Even when I try with the option key pressed, there is no plus sign with the mouse arrow. Someone suggested to use the terminal and I did. It was a hassle, though.

Recording audio from a DVD

Does anyone know of a good freeware or shareware program for recording audio from a DVD into any format?
iBook G4 Mac OS X (10.4.3) 80G HD/1.33GB RAM/ Too Much Music

A nice tool for ripping and demuxing the audio part off a DVD is OSex.
You will get ac3 track - convert them with mAC3dec. http://sourceforge.net/projects/mac3dec

Hi guys I'm really in need of some help. I have an IMac I3 for a while now I've been having a problem of my machine refusing it shut down , it goes to a blue screen with a spinning wheel but doesn't shut down. And now won't boot from install DvD

Please some one help me ...
A) my mac won't shut down with external HD connected (if it's been used)
B) there are disk permissions that can't be fixed SUID stuff ..
C) I have now verified the Mac HD and it tells me it's corrupt in bold red writing and to start up from install DVD
D) it won't boot from DVD so I cannot run the repair , initially the machine was spitting it out on start up , now it appears to be attempting to boot off DVD , well it sounds like it is .... BUT it's hanging with the Mac Logo and a wheel ... For um .... 30min now...
E) weirdly when OSX is booted off the hard drive , it won't recognise the Install DvD or the applications one... It just spits them out....
I had an old PPC 17" and it was a beaut .... Never had a single problem with it ...
I bought this one December 2010 and it's been nothing but issues for a computer in excess of £1000 I'm extremely disappointed ... And weirdly the shutting down issue started when it was a week out of warrantee ... I feel conned and am almost at the point of throwing it at a wall and buying a PC

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

Using a script to get specific itens from a dvd

How can I get specific itens from a dvd using a list of archives.
for example: I have a list exel ou text containing the files I'd like to extract from this dvd ...Is it possible? put this list working to copy these files?
thank you very much.....

If you're a professional photographer with 50,000 pictures stored now and more coming all the time, you need to forget about using iPhoto and get yourself some professional-quality digital asset management software. iPhoto is not meant for people like you, and instead of providing a simple, elegant one-stop answer to all your needs, iPhoto is actually complicating your life.
You need an application that will:
- catalog ALL your images and keep track of where they are, no matter how many DVDs, folders, partitions or hard drives they're spread over;
- display thumbnails of ALL of them, even when the DVD that contains them is not present in any drive, so you can select all the ones you want for a project;
- find and copy (or export) the originals of all the files you've selected in the browser window, even if it means prompting you to insert the necessary DVDs for all of them.
I suggest Googling "digital asset management software Macintosh" and seeing what turns up. I used to use an old version of Extensis Portfolio, and even that would have been better for your purposes than iPhoto is.

Can no longer copy files between internal drives or from burned DVD's

This just started today as far as I can tell. We have 4 dual 2.7GHz G5's running 10.4.4. Two of them seem to work as normal. The other two won't let me drag/copy files from one of the internal drives to the desktop or the other internal.
We have two internal drives, the one with OSX on it that works fine as in I can copy/drag files to the other internal drive (labeled "AV") or to the desktop. The AV drive won't let me copy/drag any files to the desktop or the other internal, I get the circle with a line through it. Also when I burn a DVD I can't copy/drag the files anywhere on any drive. If I put a previously burned disk (burned prior to today) in I can copy it fine to any drive.
I have verified/repaired all disks, repaired permissions, and checked read&write permissions.
Any help?

OK, I figured it out (I'll admit to being a Mac n00b). I was using DVD+R's. So the act of trying to copy files from a DVD+R (even though it was burned in the same G5) changes something in the drives so nothing on them will copy.
Ejecting the DVD+R and restarting without the disk in it got it back to normal. The problem was reproduced when I tried the DVD+R again (just to confirm the issue and solution). Again a restart fixed it.
Moral of the story, don't use DVD+R in Macs even though they can burn to them.
Anyway, if anything hope this post can help other n00bies.
G5 Mac OS X (10.4.4)

Working with my 2 FireWire HD i had a crash. the only way to start was a safe start. then id maged to start from a DVD and install a MAC OS 10.3 wich ran 4 some time then the same problem only safeMode. kernel panic inserted the tech tool DVD

working with my 2 FireWire HD i had a crash. the only way to start was a safe start. then id maged to start from a DVD and install a MAC OS 10.3 wich ran 4 some time then the same problem only safeMode. kernel panic by inserting the tech tool DVD, wich produces the following highligted text:
panic(cpu 0 caller =xffff0003): 0x300 - Data access
latest stack backtrace for CPU 0:
Backtrace:
0x0009CC88 0x00D63C 0x00029DAO 0x000BOA10 0x000B4270
proceeding back via exception chain:
Exception state (sv=0x26acd700)
PC=0x2717E900; MSR=0x00009030; DAR=0x00000000; DSISR=0x40000000; LR=0x2717EBE4; R1=0x26AD3AE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x27178B0 0x00344ACB 0x00345970 0x2717EC08 0x2718458 0x00340590
0x003496EC 0x0034B59C 0x0034A6BC 0x000B1DD4
Kernel Loadable modules in backtrace (with dependencies):
com.apple.driver.AppleFWDHC1(3.9.5)00x2717c000->0x271aafff
dependency: com.apple.iokit.10PCIFamily(2.6)00x1e840000
dependency: com.apple.iokit.I0FireWireFamily(3.4.7)00x270dd000
Exception state (sv=0x26abd280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000;R1=0x00000000; XCP=0x00000000 (unknown)
BSD process name corresponding to current thread: kernel_task
so what
greetings from berlin

Greetings,
It appears to be a FW problem, possibly flaky case, or drive problem.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

IPod Classic 160GB film library sync problem - trying to sync films that have converted from purchased DVD to mp4 format locally, not purchases from the online store - all other libraries sync perfect - why?

Hello Apple and the iTunes Windows PC users community.
I am trying to sync films that I have converted from purchased DVD to mp4 format locally, not purchases from the online store. The mp4s all appear and play successfully in my iTunes application but will not sync across to the iPod film library folder.
For your information: I am using iTunes 11.1.3.8 on a Windows 7 64bit machine with 500GB hard disk and 8GB of Ram in the UK.
I have restored the iPod classic 160GB three times now to see if it was a hardware problem with no joy. Each time all the music restores properly as do the podcasts and all the items in TV programmes all appear to sync and work fine.
I have also tried to copy films into the TV Programmes to get around it with no joy. They always go to the films section to start with. It is just the Films library that does not sync - all others work perfectly. As a last resort I have uninstalled and re-installed iTunes with no joy either.
I am technically savvy and have gone through the itunes and ipod settings but nothing appears to make a difference - This is the first time I have had to post here as I can usually solve the majority of the ipod anomilies but this one has me flummoxed.
Has the film encoding type changed in the newest itunes update? - Has this happened to anybody else and is it a hardware, software, or operating system problem.

Having uninstalled the current version 11.1.3.8 and loaded and older version of iTunes 10.7.0.21 I can now categorically confirm that the newest update seems to be causing the problem as the films and TV Programmes are syncing perfectly on this older version.
If you are going to do this please dont forget to remove the ' iTunes Library.itl' file as this stops the older versions from running as I've just found out

Is there any way to import the photos from a DVD slideshow I made in 2007?

is there any way to import the photos from a DVD slideshow I made in 2007? they are set to music and there are quite a few photos on the slideshow. I didn't back up the photos on a separate DVD/CD so the photos are all there but i don't know how to import them from a musical slideshow. Help!

Unless you opted to add the source image files to the DVD's ROM Contents the answer is no.
OT

I'm installing windows 8 64 from iso dvd-I did the partition wiht BCamp 5 and I did the usb with compatibility software-once installation start from dvd, it ask me for some disk, usb or dvd drivers to continue. How I can continue the instalation?

I'm installing windows 8 64 from iso dvd-I did the partition wiht BCamp 5.
I did the usb drive with the compatibility software-once installation start from the dvd, it ask me for some disk, usb or dvd drivers to continue.
How I can continue the instalation? How I can provide those driver to the instalation process?
Thanks
Manuel

You can't get there with GUID/GPT.
There are tips on making a USB flash device that is bootable.
You can set aside a small 6GB partition somewhere and put Windows 7 installer there and run it WHILE IN Windows.
Windows Vista can be upgraded in place to 7 RC.
You'll need NTFS (30-50GB).
Windows doesn't support FW for booting.
You can create a drive that has Master Boot Record.

Is there an instruction sheet detailing how to install Photoshop Elements 13 (from a DVD disk), on a Windows 8.1 computer, and if so, where do I find it

Is there an instruction sheet detailing how to install Photoshop Elements 13 (from a DVD disk), on a Windows 8.1 computer, and if so, where do I find it?

Googled for an instruction sheet. Got the following.
https://helpx.adobe.com/photoshop-elements/getting-started/install-pse.html
and
https;//helpx.adobe.com/photoshop-elements/kb/photoshop-elements-installation-errors.html
(Don't know why the second one didn't turn into a link, that's the url that printed out at the bottom of the page)
In any case it doesn't matter. I returned it to the store where I bought it.
Rule #1; Don't use a product if the people who produce that product (software, hardware, etc.) don't properly support it.
User forums and\or chat lines, are useful and may help. But! They do not constitute proper support (not for installation purposes anyway).

704x480 from a DVD - Messing Me Up!

Similar Messages

Maybe you are looking for