7110 and The specified domain controller could not be contacted

Hello,
Running a 7110 with 2010.Q3.2.0 Software Release and can't seem to join a Windows 2008 SP2 x64 Active Directory Domain.
I get the following:
error: The specified domain controller could not be contacted, or the domain is
invalid for the controller.
Does anyone know of any known bugs????

Click Help: Active Directory - there is a link to a registry setting you need to make.

Similar Messages

Active Directory domain controller could not be contacted

Hello
Help please.
I am trying to add a new server (2008) to domain 'bridgelimited.local' - only one DC (2003) doing everything at the moment. The plan is to add the new server, then move everything over from the old machine, then retire/upgrade the old machine and use as a backup.
I am currently trying to dcpromo on the new machine but I get the following error:
The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller for domain bridgelimited.local:
The error was: "DNS name does not exist."
(error code 0x0000232B RCODE_NAME_ERROR)
The query was for the SRV record for _ldap._tcp.dc._msdcs.bridgelimited.local
Common causes of this error include the following:
- The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses:
212.50.160.100
196.168.16.2
- One or more of the following zones do not include delegation to its child zone:
bridgelimited.local
local
. (the root zone)
For information about correcting this problem, click Help.
192.168.16.2 is IP address for the DC.
Any help would be grately appreciated.
Kind Regards
Richard

Managed to get the DCDIAG
Here goes (I know my harddisk is failing - that's why I am desperate to get everything shifted to the new server).
Domain Controller Diagnosis
Performing initial setup:
   * Verifying that the local machine bridgeserver, is a DC.
   * Connecting to directory service on server bridgeserver.
   * Collecting site info.
   * Identifying all servers.
   * Identifying all NC cross-refs.
   * Found 1 DC(s). Testing 1 of them.
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\BRIDGESERVER
      Starting test: Connectivity
         * Active Directory LDAP Services Check
         * Active Directory RPC Services Check
         ......................... BRIDGESERVER passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\BRIDGESERVER
      Starting test: Replications
         * Replications Check
         * Replication Latency Check
            DC=ForestDnsZones,DC=BridgeLimited,DC=local
               Latency information for 2 entries in the vector were ignored.
                  2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
            DC=DomainDnsZones,DC=BridgeLimited,DC=local
               Latency information for 2 entries in the vector were ignored.
                  2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
            CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local
               Latency information for 2 entries in the vector were ignored.
                  2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
            CN=Configuration,DC=BridgeLimited,DC=local
               Latency information for 2 entries in the vector were ignored.
                  2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
            DC=BridgeLimited,DC=local
               Latency information for 2 entries in the vector were ignored.
                  2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
         * Replication Site Latency Check
         ......................... BRIDGESERVER passed test Replications
      Starting test: Topology
         * Configuration Topology Integrity Check
         * Analyzing the connection topology for DC=ForestDnsZones,DC=BridgeLimited,DC=local.
         * Performing upstream (of target) analysis.
         * Performing downstream (of target) analysis.
         * Analyzing the connection topology for DC=DomainDnsZones,DC=BridgeLimited,DC=local.
         * Performing upstream (of target) analysis.
         * Performing downstream (of target) analysis.
         * Analyzing the connection topology for CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local.
         * Performing upstream (of target) analysis.
         * Performing downstream (of target) analysis.
         * Analyzing the connection topology for CN=Configuration,DC=BridgeLimited,DC=local.
         * Performing upstream (of target) analysis.
         * Performing downstream (of target) analysis.
         * Analyzing the connection topology for DC=BridgeLimited,DC=local.
         * Performing upstream (of target) analysis.
         * Performing downstream (of target) analysis.
         ......................... BRIDGESERVER passed test Topology
      Starting test: CutoffServers
         * Configuration Topology Aliveness Check
         * Analyzing the alive system replication topology for DC=ForestDnsZones,DC=BridgeLimited,DC=local.
         * Performing upstream (of target) analysis.
         * Performing downstream (of target) analysis.
         * Analyzing the alive system replication topology for DC=DomainDnsZones,DC=BridgeLimited,DC=local.
         * Performing upstream (of target) analysis.
         * Performing downstream (of target) analysis.
         * Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local.
         * Performing upstream (of target) analysis.
         * Performing downstream (of target) analysis.
         * Analyzing the alive system replication topology for CN=Configuration,DC=BridgeLimited,DC=local.
         * Performing upstream (of target) analysis.
         * Performing downstream (of target) analysis.
         * Analyzing the alive system replication topology for DC=BridgeLimited,DC=local.
         * Performing upstream (of target) analysis.
         * Performing downstream (of target) analysis.
         ......................... BRIDGESERVER passed test CutoffServers
      Starting test: NCSecDesc
         * Security Permissions Check for
           DC=ForestDnsZones,DC=BridgeLimited,DC=local
            (NDNC,Version 2)
         * Security Permissions Check for
           DC=DomainDnsZones,DC=BridgeLimited,DC=local
            (NDNC,Version 2)
         * Security Permissions Check for
           CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local
            (Schema,Version 2)
         * Security Permissions Check for
           CN=Configuration,DC=BridgeLimited,DC=local
            (Configuration,Version 2)
         * Security Permissions Check for
           DC=BridgeLimited,DC=local
            (Domain,Version 2)
         ......................... BRIDGESERVER passed test NCSecDesc
      Starting test: NetLogons
         * Network Logons Privileges Check
         ......................... BRIDGESERVER passed test NetLogons
      Starting test: Advertising
         The DC BRIDGESERVER is advertising itself as a DC and having a DS.
         The DC BRIDGESERVER is advertising as an LDAP server
         The DC BRIDGESERVER is advertising as having a writeable directory
         The DC BRIDGESERVER is advertising as a Key Distribution Center
         The DC BRIDGESERVER is advertising as a time server
         The DS BRIDGESERVER is advertising as a GC.
         ......................... BRIDGESERVER passed test Advertising
      Starting test: KnowsOfRoleHolders
         Role Schema Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
         Role Domain Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
         Role PDC Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
         Role Rid Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
         Role Infrastructure Update Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
         ......................... BRIDGESERVER passed test KnowsOfRoleHolders
      Starting test: RidManager
         * Available RID Pool for the Domain is 2609 to 1073741823
         * bridgeserver.BridgeLimited.local is the RID Master
         * DsBind with RID Master was successful
         * rIDAllocationPool is 2109 to 2608
         * rIDPreviousAllocationPool is 2109 to 2608
         * rIDNextRID: 2121
         ......................... BRIDGESERVER passed test RidManager
      Starting test: MachineAccount
         * SPN found :LDAP/bridgeserver.BridgeLimited.local/BridgeLimited.local
         * SPN found :LDAP/bridgeserver.BridgeLimited.local
         * SPN found :LDAP/BRIDGESERVER
         * SPN found :LDAP/bridgeserver.BridgeLimited.local/BRIDGELIMITED
         * SPN found :LDAP/96d36b0b-a148-4c2f-b3d3-8c2ac83fcaf9._msdcs.BridgeLimited.local
         * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/96d36b0b-a148-4c2f-b3d3-8c2ac83fcaf9/BridgeLimited.local
         * SPN found :HOST/bridgeserver.BridgeLimited.local/BridgeLimited.local
         * SPN found :HOST/bridgeserver.BridgeLimited.local
         * SPN found :HOST/BRIDGESERVER
         * SPN found :HOST/bridgeserver.BridgeLimited.local/BRIDGELIMITED
         * SPN found :GC/bridgeserver.BridgeLimited.local/BridgeLimited.local
         ......................... BRIDGESERVER passed test MachineAccount
      Starting test: Services
         * Checking Service: Dnscache
         * Checking Service: NtFrs
         * Checking Service: IsmServ
            IsmServ Service is stopped on [BRIDGESERVER]
         * Checking Service: kdc
         * Checking Service: SamSs
         * Checking Service: LanmanServer
         * Checking Service: LanmanWorkstation
         * Checking Service: RpcSs
         * Checking Service: w32time
         * Checking Service: NETLOGON
         ......................... BRIDGESERVER failed test Services
      Starting test: OutboundSecureChannels
         * The Outbound Secure Channels test
         ** Did not run Outbound Secure Channels test
         because /testdomain: was not entered
         ......................... BRIDGESERVER passed test OutboundSecureChannels
      Starting test: ObjectsReplicated
         BRIDGESERVER is in domain DC=BridgeLimited,DC=local
         Checking for CN=BRIDGESERVER,OU=Domain Controllers,DC=BridgeLimited,DC=local in domain DC=BridgeLimited,DC=local on 1 servers
            Object is up-to-date on all servers.
         Checking for CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local in domain CN=Configuration,DC=BridgeLimited,DC=local on 1 servers
            Object is up-to-date on all servers.
         ......................... BRIDGESERVER passed test ObjectsReplicated
      Starting test: frssysvol
         * The File Replication Service SYSVOL ready test
         File Replication Service's SYSVOL is ready
         ......................... BRIDGESERVER passed test frssysvol
      Starting test: frsevent
         * The File Replication Service Event log test
         ......................... BRIDGESERVER passed test frsevent
      Starting test: kccevent
         * The KCC Event log test
         Found no KCC errors in Directory Service Event log in the last 15 minutes.
         ......................... BRIDGESERVER passed test kccevent
      Starting test: systemlog
         * The System Event log test
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:47:27
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:47:41
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:47:55
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:48:09
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:48:23
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:48:38
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:48:52
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:49:06
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:49:20
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:49:54
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:50:08
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:50:22
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:51:33
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:51:53
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:52:07
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:52:21
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:52:35
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:52:49
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:53:03
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:53:17
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:53:31
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   16:53:45
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   17:12:23
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   17:12:37
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   17:12:51
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   17:13:05
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   17:13:19
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   17:13:33
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   17:13:47
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   17:14:01
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   17:14:15
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   17:15:24
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   17:15:38
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   17:15:53
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   17:16:07
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   17:16:21
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   17:16:35
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   17:16:49
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   17:17:03
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         An Error Event occured. EventID: 0xC0040075
            Time Generated: 09/10/2009   17:17:17
            Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
         ......................... BRIDGESERVER failed test systemlog
      Starting test: VerifyReplicas
         ......................... BRIDGESERVER passed test VerifyReplicas
      Starting test: VerifyReferences
         The system object reference (serverReference)
         CN=BRIDGESERVER,OU=Domain Controllers,DC=BridgeLimited,DC=local and
         backlink on
         CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
         are correct.
         The system object reference (frsComputerReferenceBL)
         CN=BRIDGESERVER,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=BridgeLimited,DC=local
         and backlink on
         CN=BRIDGESERVER,OU=Domain Controllers,DC=BridgeLimited,DC=local are
         correct.
         The system object reference (serverReferenceBL)
         CN=BRIDGESERVER,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=BridgeLimited,DC=local
         and backlink on
         CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
         are correct.
         ......................... BRIDGESERVER passed test VerifyReferences
      Starting test: VerifyEnterpriseReferences
         ......................... BRIDGESERVER passed test VerifyEnterpriseReferences
   Running partition tests on : ForestDnsZones
      Starting test: CrossRefValidation
         ......................... ForestDnsZones passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... ForestDnsZones passed test CheckSDRefDom
   Running partition tests on : DomainDnsZones
      Starting test: CrossRefValidation
         ......................... DomainDnsZones passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... DomainDnsZones passed test CheckSDRefDom
   Running partition tests on : Schema
      Starting test: CrossRefValidation
         ......................... Schema passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... Schema passed test CheckSDRefDom
   Running partition tests on : Configuration
      Starting test: CrossRefValidation
         ......................... Configuration passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... Configuration passed test CheckSDRefDom
   Running partition tests on : BridgeLimited
      Starting test: CrossRefValidation
         ......................... BridgeLimited passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... BridgeLimited passed test CheckSDRefDom
   Running enterprise tests on : BridgeLimited.local
      Starting test: Intersite
         Skipping site Default-First-Site-Name, this site is outside the scope
         provided by the command line arguments provided.
         ......................... BridgeLimited.local passed test Intersite
      Starting test: FsmoCheck
         GC Name: \\bridgeserver.BridgeLimited.local
         Locator Flags: 0xe00003fd
         PDC Name: \\bridgeserver.BridgeLimited.local
         Locator Flags: 0xe00003fd
         Time Server Name: \\bridgeserver.BridgeLimited.local
         Locator Flags: 0xe00003fd
         Preferred Time Server Name: \\bridgeserver.BridgeLimited.local
         Locator Flags: 0xe00003fd
         KDC Name: \\bridgeserver.BridgeLimited.local
         Locator Flags: 0xe00003fd
         ......................... BridgeLimited.local passed test FsmoCheck
The only thing I can see (other then the HDD) is the
IsmServ Service is stopped on [BRIDGESERVER]
Hope you can help. Pretty please.
Kind Regards
Richard

An Active Directory Domain Controller could not be contacted

Hi,
I encountered this error while trying to change windows 8 & 7 from workgroup to a domain. i've tried all i think i know but just to no avail.
i will be very glad if anyone in this forum can help me provide a solution to this issue.
NOTE: i have a windows server 2008 with DNS and DHCP running, and 3 windows xp systems are added to the domain already.
Thanks

Hi,
Anything updates now?
It seems that the issue was related to DNS. Please make sure that you have pointed the correct DNS server on the client computer. If your DNS server role is installed on the DC, please make sure
that your DNS server is pointed to the DC on the computer that you wanted to join the domain.
In addition, you can also check in DNS to see if the SRV record existing or not. If not, please stop and start the Netlogon service to force the DC to re-register the appropriate SRV
records.
Furthermore, I would appreciate it if you can feedback to us.
Best regards,
Susie

The specified domain either does not exist or could not be contacted when logging in through RDP. Server 2012/SBS 2007

I have a server 2012 machine running RDP and a PDC running SBS 2007. Every once a while all my users get an error saying "The specified domain either does not exist or could not be contacted". After waiting ~5-10 minutes the issue resolves itself.
I believe it has something to do with the syncing between the two but am not 100% sure. Anyone know a fix or what I should look at?
Jerry T

Hi Jerry,
Thank you for posting in Windows Server Forum.
After referring to your error, it seems to have DNS issue in your case which can’t locate the DC. Please check the setting related to DNS issue as following. (Below quoted from
this thread)
If this is the case, I would recommend proceeding like that:
1. Make sure that each DC has only one IP address in use and ONLY one NIC card enabled (Other NICs should be disabled)
2. Make sure that public DNS servers are configured as DNS forwarders and not in IP settings of DCs
3. Choose a healthy DC / DNS server and make each DC point to it as primary DNS server
4. Make each DC / DNS server point to its private IP address as secondary DNS server
5. Make sure that needed ports for AD replication are opened: http://technet.microsoft.com/en-us/library/bb727063.aspx
6. Check your DNS zones and remove manually all obsolete / unused DNS records for DCs
Once done, run ipconfig /registerdns and restart netlogon on each DC you have.
On the client computer, run ipconfig /flushdns and check again.
Hope it helps!
Thanks.
Dharmesh Solanki

"the specified domain either does not exist or could not be contacted"

Dear Experts,
I made an installation of BPC 7.0 MS SP04 in a multiserver environment. Installation process terminated correctly. My installation user is a domain user, and he's also local Administrator on my Web/Application Server.
I simply want to add a domain user to my ApShell: so I log on to ApShell with my installation user, then I click to "add a new user".
When I try to click on "Available domain [domain name]" to see domain resources, popup appears with the following message: "the specified domain either does not exists or could not be contacted".
I cannot browse in to the domain!
Additional information:
1.The domain has been added from BPC server manager ->define system user group->domain
2.The BPC server are in the same domain to which this domain user belongs .
3. I can browse the domain resources with installation user from Appl/Web server using start->control panel-> Administrative tools-> Component Services->Active directory.
4. It's possible also add another domain user on the security of any folder.
5. I restarted COM+ application "OSoftUserManage"
6. We have another multi server installation in the same domain, the installation user is the same, there is no problem about AD browsing.
Any help would be appreciated.
Regards,
Dario
Edited by: DARIO CUPPARI on Nov 3, 2009 3:23 PM

I opened a case with Microsoft and this problem has been fixed!
The issue was that I had both a Preferred DNS server (my local DNS server) and an Alternate DNS server (8.8.8.8, which I added for "good measure" in my ignorance) listed on the server. Removing the Alternate DNS server fixed the problem.
(Control panel/Network and Sharing Center/Change Adapter settings
Right click on your connection, choose properties.
Click on TCP/IPv4 (unless you are using IPv6...) and choose properties
Make sure there is only a Preferred DNS server listed.)
Why redundancy is not a good idea is a mystery to me, but in this case it isn't.
Peggy Thrasher

Can someone please help me!! I keep trying to download itunes but get a message that and error has happened 2/3 and check window activity. Then it shows A sever with the specified host name could not-- and then it cuts off the rest of the message.

I keep trying to download itunes in Safari but get a message that and error has happened 2/3 and check window> activity. Then it shows A sever with the specified host name could not…… and then it cuts off the rest of the message. I have reset Safari and still nothing!!!
Very frustrated!!!

It's downloading with Firefox 3.6.27 as I write. It's probably more a Safari problem in your case for which people on the Safari forum could provide suggestions. Or mybe just try again in a while as I suspect everybody is downloading right now.

One of the specified disk images could not be opened

I cannot believe how instable my system is. I switched to Mac to get a reliable system, but I cannot do without Windows entirely, hence my heavy use of VPC.
Today I got the small grey screen "You need to restart your computer". I was running VPC at the time. All apps were closed except Windows Explorer (the file system). The cause was merely unplugging my broadband connection. Wow!
On rebooting VPC I got:
"One of the specified disk images could not be opened. The disk image file is not the correct file type or uses a file format that is unsupported by this version of Virtual PC."
I "detached" my "drives" 2+3, which were pointing to my Drive2.vhdp and Drive3.vhdp data "drives" and tried again. No luck.
Drive 1 was pointing to Disk1.vhdp, which is a part of my Windows 2000.vpc package. I don't believe that it was pointing there before the crash.
# side note #
(The Windows 2000.vpc package is an old installation that I don't use but have not deleted. I currently use one called: "Windows 2000 copy 1-011105") which might or might not be a copy of "Windows 2000.vpc." I've had so many problems, it's hard to say.
I then tried and successfully detached the Disk1.vhdp and received a warning:
"The hard drive data previously used by Drive 1 is no longer contained in this PC document. The data has been moved to a separate Virtual Hard Drive Document "Windows 2000 copy 1-011105 Disk1.vhdp".
On examining the above package I find:
BaseDrive.vhd 14.45GB (size about right) dated last night when I last closed VPC
MainPackageFile Alias
UndoDrive1.vud dated at the time of the problems.
On examining my "Windows 2000 copy 1-011105.vpc7 I find:
Configuration.plist
IconCache
MainPackageFile Alias
StartMenu.plist
Do you have a suggestion as to how I can rescue my above mentioned BaseDrive.vhd please? This is more recent than my last back-up.
Many thanks in advance.

Problem solved.

What's the reason for this message, "A server with the specified host name could not be found" ? I'm using iPhone 4s, 16gB, iOS 7.0.4

I get a pop-up message saying "A server with the specified host name could not be found", whenever I try to access any streaming websites/apps or even WhatApp over Wi-Fi and I cannot access the specific THING for that moment, and I've tried switching Wi-Fi On and Off both in my Phone and also in the Router. I got an internet connection and a Wi-Fi router just before two days, and it's happening since. I got the internet speed around 80kbps and i can easily stream YouTube videos except sometimes, I receive that annoying message. I can't even browse the internet in Safari, which says "No Internet Connection"(Even though the Wi-Fi is connected), and I can access it after somewhile (say 10 minutes, it'll be perfectly alright). I use iPhone 4s. And everything about the internet connection is totally fine in my Computer, but not in my iPhone, as I've explained the issues, above. If there are any technical settings that I should change/modify, either on my computer(Windows 7 OS) or in my iPhone(iOS 7.0.4), PLEASE let me know
I hope I've provided enough information for the reader to understand my point. (I apologize for my verbal mistakes, if there are )
THANKS

Hello Paneesh,
Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s. I recommend the following steps:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M.

The itunes update server could not be contacted. Ran diagnostic and followed many support reccomendations with on success.

For at least the last 36 hours I have been unable to download updates from the itunes server for either itunes itself, or for iOS for my iphone (I need this since I am locked out of my phone). I was able to get around the problem of not being able to update itunes from the itunes server by downloading 11.0.4.4 from apple.com instead, but I don't believe I can do this for the latest iOS.
I have tried troublshooting from the support instructions for hours with no luck. Itunes is the only program that is having internet connectivity issues. I have tried disabling windows firewall, completely uninstalling my antivirus, and logging in/running itunes as an administrator. I have purged my hosts file and made sure that LAN settings are set to auto-detect. I have rebooted my router. There are no third party programs running that filter internet connections.
What else can I try?
Specific error message:
"The itunes update server could not be contacted. Please check your internet connection, or try again later."
System Information:
I am running Windows 7 Ultimate 64-bit SP1.
I am using Itunes 11.0.4.4, but was having the same problem on 11.0.2.
Network Diagnostic:
Network devices detected:
TAP-Win32 Adapter V9
Realtek PCIe GBE Family Controller
Network Connectivity:
Network interfaces verified
iTunes Store connectivity:
Internet connection verified.
Secure link to iTunes Store failed
One or more tests failed.
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 11.0.4.4
QuickTime 7.7.3
FairPlay 2.4.14
Apple Application Support 2.3.4
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0019B7800BB272F0
Current user is an administrator.
The current local date and time is 2013-06-06 01:30:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Advanced Micro Devices, Inc., ATI Radeon HD 4800 Series
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.4.4 (x64) is currently running.
iTunesHelper 11.0.4.4 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {047AE645-C178-4BCA-ADB8-1EE699E267EE}
Description:    TAP-Win32 Adapter V9
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Wed Dec 31 18:00:00 1969
Lease Expires:    Wed Dec 31 18:00:00 1969
DNS Servers:
Adapter Name:    {ED9EA421-7412-4E76-A1F0-339DD75883B9}
Description:    Realtek PCIe GBE Family Controller
IP Address:    192.168.1.16
Subnet Mask:    255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:    Yes
DHCP Server:    192.168.1.1
Lease Obtained:    Wed Jun 05 18:27:48 2013
Lease Expires:    Thu Jun 06 18:27:48 2013
DNS Servers:    192.168.1.1
Active Connection:    LAN Connection
Connected:    Yes
Online:        Yes
Using Modem:    No
Using LAN:    Yes
Using Proxy:    No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2013-04-13 13:59:00.

I have completed the Advanced iTunes Store Troublshooting workthrough and my problem persists.
For reference I will detail the steps I have followed from the Advanced Support link iOS *08* provided above.
Isolate the issue:
1) the problem is with iTunes (I can connect to other secure websites, including the apple webpage + login).
2) verified the problem is not with the network (other devices on my network can connect and download iTunes updates).
3) I cannot resolve the problem by connecting to another network.
4) I have created inbound and outbound rules to allow all traffic to/from ports 80, 443, 3689, 5297, 5298, 5353, 8000-8999, and 42000-42999. I have allowed these ports full access to all network types and all programs. I have also made sure that all apple products, especially itunes, are allowed in the list of windows firewall exceptions.
5) My date, time, and timezone are correct.
6) I am using iTunes as an administrator. I have posted the results of the diagnostic network tests above in my Original Post.
Blocked by software Firewall:
I have allowed an exception in the firewall for itunes and bonjour.
It seems to be the case that:
"If there's no firewall preventing access, but the iTunes Store still does not work while other Internet services (websites) work, the iTunes Store may be blocked by your configuration."
Blocked By Configuration:
I have run iTunes Diagnostics (results above) and the "Secure link to iTunes Store" section did not pass
I opened IE, made sure I am "Never dialing a connection"
My LAN settings are set to "Automatically detect settings"
I do not have any proxy settings
I have unchecked "Check for server cerificate revocation*" under Advanced IE properties
I have enabled "Use SSL 3.0" and "Use TLS 1.0"
I saved and restarted. Still no joy.
Rebuild Network Information
I flushed the DNS Resolver Cache
As mentioned above I reset the host file to default, and also tried to alternate method outlined in the support document involving creatings a "Copy of hosts" file and moving, editing, and returning the file to drivers/etc.
I then restarted.
Please Help! This is getting rediculous!

The specified cache entry could not be loaded during initialization

The OBIEE server is failing every few minutes of working.
I saw in the NQServer.log:
The specified cache entry could not be loaded during initialization.
Cache entry, '/home/oracleadmin/OracleBIData/cache/NQS_rprt_734086_39693_00000001.TBL', is invlaid due to either non-existing file name, size does not match, exceeding maximum space limit nor exceeding maximum entry limit, and it's been removed.
I checked the directory and there is no space limitation.
Can someone please clarify?
The server/Config/NQSConfig.INI is as follows:
[ CACHE ]
ENABLE = YES;
DATA_STORAGE_PATHS = "/home/oraceladmin/OracleBIData/cache" 2000 MB;
MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
MAX_CACHE_ENTRY_SIZE = 1 MB;
MAX_CACHE_ENTRIES = 1000;
POPULATE_AGGREGATE_ROLLUP_HITS = NO;
USE_ADVANCED_HIT_DETECTION = NO;
MAX_SUBEXPR_SEARCH_DEPTH = 7;

It's more than enough if you are using it for .tmp and .tbl files storage. Have you checked work_directory_path in NQSConfig.ini file .Is it on diffrent mount point.Usually we wil create a seperate mount point and use that as storage location.
b. Instead of using SAPurgeAllCache() , can I add shell script which delete the files fromt the cache directory and the execute run-sa.sh?You need to understand diffrence between OBIEE rpd cache and .tbl and .tmp file. SAPurgeAllCache() will purge cache from RPD.It wont purge .tmp or .tbl files.These files will be stored in some physical location.When a report start executing .tmp file will start evoluting and after execution of report it will be purged by OBIEE server automatically.
see this blog for some insight into this topic
Re: TMP Files uneder /OracleBIData/tmp
Regards,
Sandeep

CFAJAXPROXY: "The specified CFC proxy could not be found."

{ColdFusion 8, latest, Windows.}
The following statement occurs (in an included CFM file):
<cfajaxproxy cfc="crv2_js" jsclassname="ServerProxy">
The "crv2_js.cfc" file is indeed located in the same directory. (If you request it at the same URL, and enter the administrator password, a nice formatted description of the library and its methods dutifully appears, so it is there...)
But the error is:
The specified CFC proxy could not be found.
The path to the CFC must be specified as a full path, or as a relative path from the current template, without the use of mappings.
Looking also on the Administrator screen, I confirm that the directory is not mapped.
Other, <cfinvoke> calls have been used to a sister CFC-library in the same directory without incident. So I am confident that the message that I am seeing is somehow bogus ... but I do not yet know what sort of "bogosity" it must be.

Now here is something I didn't expect to see. When I turned on "extended error information" (or whatchamacallit...) I got this additional information in the displayed log:
The specified CFC proxy could not be found.
The path to the CFC must be specified as a full path, or as a relative path from the current template, without the use of mappings.
The error occurred in C:\Inetpub\wwwroot\NCPT\CRV2\cr_PrototypeManager.cfm: line 235
                                    <cfgridcolumn
                                     name="DefinitionIsLocked"
233 :                                     header="Is In Use"
234 :                                     type="boolean"
235 :                                     select="no">
236 :
237 :                                    </cfgrid>
(Ooh... formatted! Now ain't that slick!)
I took the liberty of pasting-in lines 231-232, which the debugging-output did not include. In fact, here is the entire block of code:
<cfgrid name="datagrid" pagesize="5" format="html" width="100%" height="200"
"cfc:proxy.GridSource_ReviewPrototypes({cfgridpage},{cfgridpagesize},{cfgridsortcolumn},{c fgridsortdirection},getPageSize())">
<cfgridcolumn
   name="ID"
    header="ID"
   display="false"    >
<cfgridcolumn
   name="TemplateName"
    header="Template Name" >
<cfgridcolumn
   name="PrototypeClassName"
   header="Prototype Class" >
<cfgridcolumn
   name="Description"
   header="Description">
<cfgridcolumn
   name="Enabled"
   header="Enabled"
   type="boolean">
<cfgridcolumn
   name="DefinitionIsLocked"
   header="Is In Use"
   type="boolean"
   select="no">
</cfgrid>
So... why on earth would an error like that be showing up at a place like this? (Removing the "select='no'," on the wild-guess theory that it might be "the odd man out," as-expected had no useful effect.)
My hypothesis here is that the "failure location" actually has nothing to do with anything: this is simply the last clause in the CFGrid construct, and the computer is now trying to place a call to this function:
<cffunction name="GridSource_ReviewPrototypes" access="remote" returntype="any">
<cfargument name="page"                 required="yes">
<cfargument name="pageSize"             required="yes">
<cfargument name="gridsortcolumn"       required="yes">
<cfargument name="gridsortdirection"    required="yes">
    <cfargument name="customPageSize"       required="no"     default="0">
Uh huh... straight out of a demo.
I thought I had just-now discovered the problem, as I was writing this, because the "bind" expression had two additional parameters which are not listed in <cfargument> tags. But, much to my surprise, it didn't fix it.
To be absolutely complete in my description:
In an included header-file, we have: <cfajaxproxy cfc="crv2_js" jsclassname="ServerProxy">
On this (Windows) host, the file-name of the CFC file is "crcv2_js.cfc" and it is located in the same directory as both the cfm and the included cfm.
In the <head> portion of the main page, we have (in an in-line <script> tag):
var proxy = new ServerProxy();
    proxy.setErrorHandler(showError);
    proxy.setCallbackHandler(handleResult);
I'm starin' at this thing and starin' at this thing and everything I see is screamin' at me, "bogus!" 'Cept I know it can't be.
The generated page-source code includes the following, including a bit which I have highlighted in bold face. I don't know where that bit came from.
<script type="text/javascript">
ColdFusion.Ajax.importTag('CFAJAXPROXY');
</script>
<script type="text/javascript">
var _cf_crv2_js=ColdFusion.AjaxProxy.init(
'/CRV2/crv2_js.cfc','ServerProxy');
but it does seem plausible since the URL to the site-page (on case-insensitive Windows) is, indeed:
   http://tlcapps/crv2/cr_PrototypeManager.cfm
and, again, if I type in "http://tlcapps/CRV2/crv2_js.cfc" and prove that I do know the proper ColdFusion admin-password, I get a nice pretty-printed description of this library and its methods... including the one I am trying to call. It does exist.

HT1926 I am trying to update my iTunes so I can sync my new iphone 5s and it doesn't recognize the phone, apple support said I need to update my iTunes when I try and do that I get an error message that says " the ITunes update server could not be contact

I am trying to update my iTunes so I can sync my new iphone 5s and it doesn't recognize the phone, apple support said I need to update my iTunes when I try and do that I get an error message that says " the ITunes update server could not be contacted. Please check your internet connection or try back later.
My internet works fine and I have tried back dozens of times with same result.

Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!

When trying to restore or even contact Itunes store my computer states the the ipod software server could not to contacted but I have checked netting work setting and everthing looks correct any ideas I can try as I am not a whizz on the computer yet

When trying to restore or even contact itunes store my computer states the ipod softdate server could not be contacted. When I checked the setting everything look correct. I have just changed from using xp on my computer and now using windows 7 so I am a bit lost with the different layout

maybe:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Federated free busy information - the recipients mailbox server could not be contacted

Hi guys, really hoping someone can help with a free busy issue I'm having.
I've configured a new forest with exchange 2013 installed in preparation for moving all AD objects to the newly created forest to resolve a single label domain issue. The source forest has exchange 2010 SP2 installed. I've setup a trust between
the forests and dns is resolving okay. Federation has been setup for each of the forests and sharing configured but free busy info isn't available. When trying to retrieve FB from the new exchange 2013 mailboxes i get "the recipients mailbox
server could not be contacted" Trying to lookup FB from new forest to source "the recipients server could not be contacted" I've followed the troubleshooting steps in the following link: http://johanveldhuis.nl/en/troubleshooting-federared-sharing/
which are all okay except when I run Test-FederationTrust -UserIdentity [email protected] On the exchange 2013 forest all tests are successful, on the exchange 2010 forest all tests are successful with the exception of token request which
returns: failed to request validation token. Any help on this really appreciated

Just check the application log again and found this:
Process 5660: ProxyWebRequest FederatedCrossForest from S-1-5-21-672479773-2712238020-2201217990-2314 to
https://mail.contoso.com/ews/exchange.asmx/WSSecurity failed. Caller SIDs: WSSecurity. The exception returned is Microsoft.Exchange.InfoWorker.Common.Availability.ProxyWebRequestProcessingException:
System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
   at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.EndInvoke(IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.Availability.Proxy.Service.EndGetUserAvailability(IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.Availability.FreeBusyApplication.EndProxyWebRequest(ProxyWebRequest proxyWebRequest, QueryList queryList, Service service, IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.Availability.ProxyWebRequest.EndInvoke(IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.Availability.AsyncWebRequest.EndInvokeWithErrorHandling():. The request information is ProxyWebRequest type = FederatedCrossForest, url =
https://mail.contoso.com/ews/exchange.asmx/WSSecurity
Mailbox list = <<a href="mailto:[email protected]>SMTP:[email protected]">[email protected]>SMTP:[email protected], Parameters: windowStart = 27/01/2014 00:00:00, windowEnd = 10/03/2014 00:00:00, MergedFBInterval = 30, RequestedView = MergedOnly
. ---> System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
   at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.EndInvoke(IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.Availability.Proxy.Service.EndGetUserAvailability(IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.Availability.FreeBusyApplication.EndProxyWebRequest(ProxyWebRequest proxyWebRequest, QueryList queryList, Service service, IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.Availability.ProxyWebRequest.EndInvoke(IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.Availability.AsyncWebRequest.EndInvokeWithErrorHandling()
   --- End of inner exception stack trace ---
. Name of the server where exception originated: "MailServer". Make sure that the Active Directory site/forest that contain the user's mailbox has at least one local Exchange 2010 server running the Availability service. Turn up logging for the Availability
service and test basic network connectivity.

I get the following message, when trying to check for updates on itunes:- "The iTunes update server could not be contacted. Please check your internet connection or try again later".

I get the following message when I go to "check for updates" on iTunes (I have XP on windows). Error message: "The iTunes update server could not be contacted. Please check your internet connection or try again later".
My firewall (both anti virus firewall and windows firewall, are set up to allow itunes programme to work) - I also have set both internet explorer and chrome to allow
apple website as an exception.
However, I still get the same error message... can anyone help?
Thanks

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

7110 and The specified domain controller could not be contacted

Similar Messages

Maybe you are looking for