7110 wide

Need quick answer please. ...
One of our many printers is a HP 6940 which the driver has a selection for "banner" paper. We are able to load a section of about 10-20 pages of fanfolded paper into the tray, and it picks it up and prints continuous logs straight thru, right over the folds, with no problems.
Does the HP 7110 Wide format printer have this banner option in its driver?
Thanks!

Any current lower end inkjet printers does not support poster printing, nor standard neither wide format printers.
Additionally any of the Wide fomat consumer products does not support Custom Sized media on Windows, only specific paper sizes are supported..
There might be commerical higher end wide format products which allow poster printing and specific custom sized media but those will more likely be more expensive... the Enterprise Business communities might be a better place to check if there are such products who meet your needs:
http://h30499.www3.hp.com/t5/Printers-Deskjet/bd-p/bsc-415#.VMlicoLLfvI
Hope that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Duplex printing in an Officejet 7110 wide format printer

Hi to the forum. I just purchased an Officejet 7110 wide format printer. I am trying to print both sides of the paper ( duplex ) manually as I have done with other HP printers but the print preferences do not have a "layout" tab and there is no other place I can find where I can select "print both sides". I can't do the old trick of manually typing in the odd numbered pages in the print dialog box since there is no option to type in multiple pages, just a range of pages. This is strange, since every printer I have ever use in the last 10 years allows simple duplexing by printing out the odd numbered pages, fliping the stack over and then printing out the even numbered pages. I can't believe that this new printer won't do that. What am I missing?

Hello Stargeezer63, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Officejet 7110 Wide Format Printer not printing true black on HP Semi Glossy A4 paper

I recently bought an HP Officejet 7110 Wide Format Printer and I have tried several times to print black on HP Semi Glossy A4 paper C6818A and each time it comes out as an almost dark brown off-black. I have tested it with another HP printer and it printed a perfect dark black from the same file using standard printer settings for plain paper. I have just replaced the printer cartridges supplied with the printer with some new ones and this has not fixed the problem either. If you could suggest any possible solutions I would appreciate it. Thanks

Hi , I see that you are experiencing issues with the printer printing the black in a dark brown, using HP Semi Glossy A4 paper, you have already changed the cartridges with the same results. I would like to help you with this issue. I have provided a document with some steps to try to see if that will resolve the issue.Fixing Print Quality Problems for the HP Officejet 7110 Wide Format ePrinter Series. Try printing from another application to see if you have the same results. What applications have you tried to print from? Check the print driver settings to make sure the paper type and quality is set properly.Changing Print Settings in Windows 8. Here is another document to troubleshoot the cartridge if it isn't software related.Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Officejet 7110 Wide Format ePrinter Series. What operating system are you using? How to Find the Windows Edition and Version on Your Computer. If you need further assistance, just let me know. Have a nice day!
Thank You.

Reset Officejet 7110 Wide

Hello,
I bought an OfficeJet7110 Wide, The guy that install it, used the claim code on his ePrint account.
How do I reset this printer, in order to get new Claim Code ?
So, I can register it on my ePrint ("HP Connected") ?
Thanks,

That is fantastic to hear, that was essentially my second suggestion for getting that code! I am glad you are back up and running, and if you ever have any further questions or issues I hope that you remember the experience you had here on the forums and know that me and my colleagues are here almost 24-7 to help support you and your needs.
I hope you are having a wonderful week, and I hope that the weather where you are located is as beautiful there as it is here!
-Spencer

Printer setup problems

I received a new Officejet 7612 yesterday and have been having trouble setting it up. I'm setting it up using a MacBook Pro (2012) with Yosemite OS.
I've followed all of the set up instructions received with the device and downloaded the drivers for Yosemite from the HP website. Unfortunately the scan to email function didn't work so I uninstalled the drivers and tried to reinstall them. Unfortunately I then got a 'critical error' message on the MacBook to say the drivers couldn't be installed, so I tried re-installing the drivers four more times, each time getting the same critical error message. and then gave up.
That was yesterday. This morning I've come into the office and the device no longer connects to our wireless network (or any other that we can access). I've tried using the network setup wizrd on the device but it refuses to 'see' our wireless network. Is there a way of restoring factory settings on the device and starting again?
Any help would be much appreciated! Thanks.

Hi @ArchitectSam , and welcome to the HP Forums!
I can see you're having issues with your printer, both with the software, and the connectivity.
I'd like to help with that!
I would first recommend selecting Setup on the front panel of the printer. Then, select Tools, and select Restore Factory Defaults.
After the defaults are reset, rerun the wireless setup:
Setting Up the Printer for a Wireless or Wired Network for the HP Officejet 7110 Wide Format ePrinte...
Once the printer is on the network,
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend reinstalling the HP Officejet 7610 Wide Format e-All-in-One series Full Feature Software and Drivers.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Windows 8/8.1 Partial Print Problems with Networked Inkjet Printers (Envy, Officejet and Deskjet)

There are a lot of threads being posted about this problems with printing on the following these devices when they are connected in a Network Environment (Wireless or Wired)
HP Officejet Pro 6830
HP Officejet 6800
HP Officejet Pro 6230
HP Officejet 6220
HP Officejet Pro 8610 e-All-in-One Printer series
HP Officejet Pro 8620 e-All-in-One Printer series
HP Officejet Pro 8630 e-All-in-One Printer series
HP Officejet Pro 8640 e-All-in-One
HP Officejet Pro 8650 e-All-in-One
HP Officejet Pro 8660 e-All-in-One
HP Officejet 7610 Wide Format ePrinter
HP Officejet Pro 3610 Black and White e-All-in-One
HP Officejet Pro 3620 Black and White e-All-in-One
HP Officejet Pro 251dw Printer series
HP Officejet Pro 276dw MFP series
HP Officejet 7110 Wide format ePrinter
HP Officejet Pro 501dw Printer
HP Officejet Pro 401dw Printer
HP Officejet Pro X451dw Printer
HP Officejet Pro X576dw MFP
HP Officejet Pro X476dn MFP
HP Officejet Pro 451dn/551dn MFP
HP Officejet Pro 451dw/551dw MFP
HP Officejet 4630 e-All-in-One
HP Deskjet Ink Advantage 4640 e-All-in-One Printer series
HP Deskjet 2540 All-in-One Printer
HP Deskjet Ink Advantage 2540 All-in-One Printer
HP ENVY 5530 e-All-in-One Printer
HP Deskjet Ink Advantage 4510 e-All-in-One Printer
HP ENVY 4500 e-All-in-One Printer
HP Deskjet Ink Advantage 3540 e-All-in-One Printer
HP posted a workaround for this problem while they were working with Microsoft to get the root cause of the problem, many customers commented that the workaround helped them out and they were able to print. This workaround was not easy to use as the customer needed to add another printer manually and changed drivers.
We can now announce that the problem has been fixed, the problem involved a Microsoft Network component that HP was using to talk to and track the printers on the network. This fix is being rolled out by Microsoft via Windows Update and anyone who has Windows Update enabled and set to automatically install updates should have already received this update. For those that do not have Windows Update setup to automatically install fixes the fix is available now and should be installed.
The details of this fix and a manual method of installing it can be found here.
http://support.microsoft.com/kb/3000461
This fix is only designed for users that are using there printer on a Network (Wireless or Wired) and will not fix partial printing problems encountered with USB connections.
There are many threads in HPs forums about this issue (below are links to a few of them)
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/Missing-partial-prints-amp-Printer-Offl...
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-Envy-4500-cancels-job-in-the-middle-...
http://h30434.www3.hp.com/t5/Other-Printing-Questions/Only-prints-half-a-page/m-p/4054888
JonW
I work for HP

@tenkeypro
First, I would suggest you uninstall the exsisting driver and reinstall following one of these documents to see if it will clear this error message:
Install HP print and scan software on a Windows 8 computer (32-bit and 64-bit)
Universal Print Driver (no scan)
Driver support included in Windows 8 / Windows 8.1 or in Windows Update
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Are HP 178 and HP 920 cartridges interchangeable?

I would like to know since I have a whole box of HP 178 ink cartridges and the new printers printers I can get are the Officejets. Would a HP 178 work with HP OfficeJet 7110 wide or HP office 7500 or any of the new printers?

The HP Kenya site lists the following printers as compatible with the HP 178 cartrdiges. Unfortunately I do not find that any of these are currently available in Kenya, you might check with local dealers.
HP Deskjet 3070A e-All-in-One Printer(CQ191C)
HP Photosmart 5510 e-All-in-One Printer(CQ176C)
HP Photosmart 5515 e-All-in-One Printer(CQ183C)
HP Photosmart D5463 Printer(Q8421C)
HP Photosmart Plus e-All-in-One Printer(CN216C)
HP Photosmart Premium Fax e-All-in-One Printer(CQ521C)
HP Photosmart Wireless e-All-in-One Printer(CN245C)
HP Photosmart 6510 e-All-in-One Printer(CQ761C)
HP Photosmart 7510 e-All-in-One Printer(CQ877C)
HP Photosmart C5383 All-in-One Printer(Q8291C)
HP Photosmart C6383 All-in-One Printer(CD028C)
HP Photosmart Plus All-in-One Printer(CD035C)
HP Photosmart Premium All-in-One Printer(CD055C)
HP Photosmart Premium Fax All-in-One Printer(CC335C)
HP Photosmart Premium e-All-in-One Printer(CN503C)
HP Photosmart Wireless All-in-One Printer(Q8444C)
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Ink Cartridge compatability 920 & 933

Can my current ink cartridge (920) used for the 6500A printer be used in the 6700 printer (which uses 933 cartridge)?
Thank you.

Hi,
No. You can only use 933 and 933XL for the following printers:
Compatible Printer
For use with:
HP All-in-One Printers
OfficeJet 6600 e-All-in-One - H711a, OfficeJet 6600 e-All-in-One - H711g, OfficeJet 6700 Premium e-All-in-One - H711n
HP Inkjet Printers
OfficeJet 6100 ePrinter - H611a
HP Wide Format Printers
OfficeJet 7110 Wide Format ePrinter - H812a, OfficeJet 7610 Wide Format e-All-in-One
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Officejet 7110 series wide format does not accept static IP address settings on wired IP4 network

Install printer successfully on wired network and printer is assigned dynamic IP. Then attempt to change the dynamic to static IP using EWS in windows internet explorer v11 and windows 7 Pro SP1 64bit.
On network tab I chouse manual> click suggest IP settings feilds are populated and I enter manual public DNS ip address. Everytime I click apply but all I get is "invalid Input"
So frustrating a 5sec job ends up being 5day job.........
Is this a browser compatibility issue? Anybody know?
My router I had for years its older netgear DG834G and the IP address that is suggested is valid
OK nevermind......Answered my own question.....Thanks HP......Just set your default browser to anything but IE. You know really how hard can it be to inform users who purchase these printers NOT to use internet explorer vXX as your default browser to SETUP your HP printer......This should be explicit 90% of home users will have IE as their default browser.....Yes I know you get a compatibility dialog appear about your browser but it should not install to an incompatiible brower PERIOD.......force the user to use another......
But it does.........
Thanks

Hello Qw8, welcome to the forums!
I read your post about not being able to successfully install your Officejet 8600 Plus to your wired network. I will do my best to find suggestions for you to try. I would first like to know which Operating System you are installing the printer on to help me with my research.
If you haven't already, run the installation (HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g Drivers) with your security and firewalls disabled to see if the proper connection can be made.
I do see you ask about other resets and there are others however, at this stage they may not be needed. If they are, I can send you a private message at that time with that information.
Please let me know your OS and we will go from there!
Have a wonderful weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My ITunes gift card I brought, the Reemdem code had bin wide out so I can no longer see that code what do I do

My ITunes gift card I brought, the Reemdem code had bin wide out so I can no longer see that code what do I do?

"bin wide out"?
If you mean you cannot read the code on the back of the card take it back to the store you purchased it from. If the numbers are not visable because you scratched them out I don't know if the store will replace or refund that. If you can read some of the numbers you could just keep trying a combination of letters and numbers to replace the missing ones. This will take a while depending on how many inputs are missing. You will have to use 0 through 9 and I am guessing A through Z.

File Type Associations Do Not Stick System-Wide CS4

When I set File Type Associations for PSD, Tiff, DNG and Jpeg fles in Bridge CS4 so that my files will open in PS CS3 (and insure that the same file associations apply in Bridge CS3), this works as it should from within CS4 and CS3, but it is impossible to introduce a system-wide change in Mac OS 10.5.5 via File-Info. It always reverts to CS4 for these file types, if I try to 'modify all'. The same thing happened when I upgraded from CS2 to CS3.

If File Type Associations are set properly in the Bridge preferences, the default setting can be made to open files in PS CS3, with CS4 installed. This works from within CS3 and CS4. However, it sometimes happens that one is in the Finder, and the default remains PS CS4, however much one tries (via File-Get Info) to modify the default system-wide settings so that these files open in CS3. In any event, a bit invasive. Of course, if I could get comfortable with the Adjustment Layer Panels, all this would be unnecessary, but for the moment, there appear to be too many clicks, and it is going to take some time, so I don't want to burn bridges. Perhaps there is also some ambiguity in my mind as to what the pointing finger in the new Curves dialogue box, much like a tolling bell, is trying to tell me.
But thanks, once again Anne, for your good-natured help.

Unable to get HD Wide Screen 16:9 to fill the screen on TV.

12/20/08
Problem: I am not able to get HD Wide Screen 16:9 to fill the screen on TV. Leaves dark bands on the top and bottom of picture.
What I'm working with: Mac Pro Quad-Core Intel Xeon Processors with 2GB Memory soon to be 6GB & 30 inch screen. QuickTime Pro 7.5.5, Final Cut Express 4.0.1, and iDVD, 7.0.2.
New JVC, GZ-HD3U camcorder with QuickTime conversion software, recently updated, provided by JVC with the camera to change native TOD. files created in the camcorder to native MPEG2 files in Quicktime at a size of 1920 x 1080.
Two TV's, one Wide Screen HD and the other standard screen. I have changed the TV aspect rations back and forth from 4:3 to 16:9 and the only thing that changes is the size of the black bands on the top and bottom of the screen. The black spaces are larger in 16:9, making the picture appear squeezed.
I am using RW DVD discs so I can continue to try different setups without wasting discs and so far I have tried about 12 different arrangements. Two methods work but they are export conversions to a 4:3 aspect ratio and 720X480DV/DVCPRO-NTSC. Certainly this is a work around, but doing this looses the Wide Screen HD effects provided by the original JVC movies.
When I import the clips, and I've tried a number of different imports from QuickTime to Final Cut Express, I make sure that the Sequence set up matches or comes as close as possible to the imported clips. I've tried exporting them from FCE without changes and I have exported them using QuickTime to change them to different formats using nearly everything available trying to get the clips or sequences ready to import to iDVD.
In iDVD I have set up using both aspect ratios and it appears as thought setting up in 16:9 makes the spaces above and below even larger on TV. In fact it creates these spaces above and below even on the 720X480DV/DVCPRO-NTSC clips that work just fine on the 4:3 aspect ratio settings on the same TV.
If anyone has overcome this problem, I would greatly appreciate your guidance. So far, I've spent over a 100 hours on it to no avail.
Larry

Tom, I don't know where to go in FCE to create a AVCHD AIC Sequence. I can find the
1920X1080i60 in the Sequence format without any problem. And in QT don't know where to select AIC but I select Apple Intermediate Codec, and under compressor I select HDV 1080i interlaced frame rate 29.97. Under Export Size Settings I don't know rather to select 1920 x 1080 HD or HD 1920 x 1080 16:9 and what about preserve aspect ratio using and Deinterlace Source Video?
Part two: When I create a Sequence in FCE with the 1920X1080i60 designation, and then import a QT HD 1920X1080 16:9 Intermediate Codec clip into a bin and then open the clip in that sequence I'm asked if I want to match the clip to the sequence and if I don't I have rendering. If I match them the rendering, as you said, goes away. However, I notice that when I check out the Item Properties on them after the above process, the Aspect ratio in the clip and Sequence, suddenly becomes HD 1440x1080. Is this normal?
Larry

My PC has blue screened twice in the past week so I force quit it it came back on a few times after that it is now grey screening with inch wide blue lines from top to bottom the apple logo is there and it is trying to boot up but nothing happening

My Mac has blue screened a couple of times this week it started to work a couple of times after that but now it is grey screening with inch wide blue lines from top to bottom the apple logo is also there it is trying to boot up again but won't. Not sure don't know anything about how to fix things but I suspect the fan has stopped working as I can't hear one. The problem I have I now live in Turkey and I am 1000 km from the nearest apple shop which is in Istanbul I believe and I now live in Didim, Altinkum I don't trust the everyday Turkish shop to take it to as they will tell you they know how to fix it but will probably make it worse, typical in Turkey. Please can someone help as we use it for our business and obviously I need it up and running ASAP I am using IPad and iPhone at moment but can't access my files which are on PC.

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

System-wide spell check will not work

Hi,
I can't get the system-wide spell check to work on my MacBook Pro with the Command + Shift + ; (semicolon) keys. Does anyone know of a solution to this problem? The Spell-Check on the Fly will work.
Thank You,
Guy

I was able to zap the pram and that solved the problem.
Guy

IMovie text has unexplained wide right margins

Hi and thanks for taking a look
I am making a movie that is subtitled. For awhile I had no problem copy/pasting the subtitles into iMovie's text field, but recently when I copy/paste from MS Word: Mac 2008 12.0.0 I encounter wide right margins that won't go away. It looks extremely unprofessional to have my text clumped to one side.
I have already tried: changing the markup and the final/original markup options; reducing the document's right margin; copy/pasting the entire document into Text Edit and then extracting text from there. Nothing has worked.
Your suggestions are greatly appreciated - the project is due tomorrow!

Bijaz wrote:
... when I copy/paste from MS Word: Mac .. I encounter ..
give this a try:
• in MSWord, save your document not as an 'MS Word'.doc, but as an RTF (under Options) - in MSW this will perhaps doesn't change the appearance of your document ..
• copy/paste from THAT document..
MSW sometimes add some 'unknow' bits&bytes, which makes other apps stumble...
and Welcome, Bijaz, to the  iMovie boards

7110 wide

Similar Messages

Maybe you are looking for