72 dpi and 300 dpi

Is it the same image quality if I were to design an image in photoshop CS3 at 72 dpi and then change the size to 300 dpi for printing, as designing the image at 300 dpi right away?
If not, does anyone know the percentage I can set my workspace so that it would represent the original size?
I am designing a postcard at 6x4 and when its 300 dpi it is obviously huge on my screen and I would like to see it as the original size so that I can have an idea of how it looks.

First of all on the screen it is pixels (ppi) not dpi.
Having got this out of the way, a quick way to see print size it to select the Zoom tool and pick the appropriate button in the Options bar at the top.
For some basic information on resolution and printing go to www.scantips.com and browse through the articles. (It's not all bout scanning!)
..and of course there is the excellent article at http://www.peachpit.com/articles/article.aspx?p=1332854

Similar Messages

Macbook Pro 15 Change Country Code to get 11n and 300 Mbit/s

Hello All!
I have a question: how can I change Country Code on my MBP 15" to get wi-fi 11n mode and 300 Mbit/s (or at least 130) with my TL-WR1043ND router. I've changed the Region setting in the web interface of my router, but it didn't solve the problem. And there is a wonder but my macbook 13" has Country Code: X2 (sometimes FR) and use 11n mode with transmit rate: 130 Mbit/s. So, as for me, that is very strange dependence — Country Code and Connection Speed.
System info:
Router preferences:
Thanx!

So, I have MBP 15-inch, Mid 2010 and MB 13-inch, Mid 2009. And, as I said before, MB 13 doesn't have the problem with 11g mode, it has Contry Code X2 or sometimes FR, but never UA. And the MB13 is older then the MBP15. Maybe problem is in the router, but I don't know how figure out it. And I don't understand, at all, the dependence Transfer Rate and Country Code — why software is restrict connection speed of hardware?

Nikon d3 and 300

anyone heard if aperture will have raw support yet for the new nikon models d3 and 300....so far those don't show up on the raw supported file page.

I've had my D300 since November with no RAW support...
This has rumbled on for months on here with only very vague answers, which IMHO is poor...
I didn't invest in Aperture to be left waiting this long...
I'm having to shoot in RAW + Jpeg which I don't like to do, but what choice do I have...
I hope it will be soon but I'm not holding my breath, all this Apple cloak & dagger secrecy stuff is just irritating...

My Itunes account was hacked and 300$ stolen and I cannot get itunes to respond. Any advice?

My Itunes account was hacked and 300$ stolen and I cannot get itunes to respond. Any advice?

The money was stolen off of gift cards stored on my itunes account, and I did close the card on the account. I have changed my infortiona security wide but kept the rest of the changes they made to my account as proof. It has indeed been 48 hours since I conta cted them, and still no response. Also on this forum others have reported the same thing happening. Very sad I cannot even call Itunes about this. Thanks for your response.

Class types 200 and 300

Gurus,
What is the difference between class types 300 , 200 ,201 in variant configuration,
Thanks
Andy

hi
The class type determines whether a class can be used as a class item in BOMs. In Customizing for the Classification System, the Class node indicator must be set for the class type. In the standard system, class types 200 and 300 are defined for materials, and class type 201 is defined for documents.

Variants class 200 and 300

what are the differences between the variant classes 200 and 300.
where we have to select 200 class and where we have to select 300 class in variant configuration.
thanking you
srinivas pai

Thanks for marking thread useful.
Class 300 and 200 are both defined for the materials.class 300 is mainly used for a variant material used for variant configurartion.We can also classify materials under class 200 which do not have to be configurable materials.But allows to use the defined characteristics and restrict the usage for a specific purpose..
Please check below threads
http://scn.sap.com/thread/631073
https://scn.sap.com/thread/576848
Yes you can copy class and create your new class .
can you please share your business requirement, what kind of solution your are budiling with this?
Thanks
Ritesh

HT5622 Sir, yesterday I'm trying to purchase an app but there is some problem and 300 bukes dedeticted from my account , why?

Sir, yesterday I'm trying to purchase an app but there is some problem and 300 bukes dedeticted from my account , why?

This is primarily a user-to-user support forum. You can report a billing problem at https://reportaproblem.apple.com or contact iTunes support at https://getsupport.apple.com/Issues.action

Difference between class 200 and 300

Experts,
Can i use class 200 for varient configuration?
I want to know difference between class 200 and 300 , are this same?
Appriciate help.
Tom

Thanks for marking thread useful.
Class 300 and 200 are both defined for the materials.class 300 is mainly used for a variant material used for variant configurartion.We can also classify materials under class 200 which do not have to be configurable materials.But allows to use the defined characteristics and restrict the usage for a specific purpose..
Please check below threads
http://scn.sap.com/thread/631073
https://scn.sap.com/thread/576848
Yes you can copy class and create your new class .
can you please share your business requirement, what kind of solution your are budiling with this?
Thanks
Ritesh

200 and 300 classes

class type 300 is a variant class
and class type 200 is a class node.
what is the difference between these two.
where do ve use them.
and wherre does they differ?

Dear,
Class 200 is used in BOM as a class item. when you create a class, in the additionla data tabpage, if you delare it as can be used in BOM, then you can use this class item in BOM. Assign all the materials to the class in classification view so that the materials assign to this class are acts as a BOM items.
Class 300 is used to delare the material as variant configuation material with class and char. With class 300 and config profile we can control the behaviour of process in Sales order.
What I explained is in nutshell the apllication part. Please let us know if ypu need more help.

Iphone sync and 300 lost address book contacts

Help. I'm sick about this. Everything has been going fine with my iphone until tonight. After I synced tonight, all 300 of my address book contacts disappeared on my phone AND on my computer. Even my backup hard drive doesn't show any contact information, only an address book icon which has no information when opened. Apple iphone tech support was unable to help me. Please I'm not going to be able to sleep tonight because of this. Can anyone out there help me get my contact information back?
Thank you.
Alden Burlington

Joel,
The Backup application they are referring to is the Backup application that comes with .Mac.
It does incremental backups. It doesn't replace the previous days backup. You can go to your backup location, and choose the day you want to restore from.
There is even a preconfigured plan for personal data and settings daily to iDisk that backs up iCal, Address Book, etc.
I would also recomend going into iSync's preferences and setting it to prompt you if more than 5% of your contacts or data will be changed. This is the default for iSync, but can be changed to not warn, or only warn when 25%, 50%, etc will be changed. If it is on the default you will get a message if information will be lost.
Also in some situations, reseting sync history before another sync, and then syncing again, may bring back some of the contacts.
Hope this helps,
Nathan C.

Change documents of material master classification class type 001 and 300

Dear guru ,
I want to see the history of change documents of material master classification using MM02.
The system allow to see the history only for class type 023.
For class type 001 or 300 the change document isnu2019t available.
I must do some settings or the function for these class type arenu2019t available ?
Thanks.

Dear ,
changes in values for a characteristic can be monitored in CL20N but as for MM02/MM03 transaction only for class type 023.
For class type 001 or 300 the change document isnu2019t available.
Thanks.

LSO 200 and 300... very urgen

Hi Experts,
I need to know LS200 compatiblity with which backend system...4.7 only or also with5.0 and 6.0.
Is LSO200 comatable with ECC5 and ECC6 also or for ECC 5 and ECC6 we have to use LSO300.
its very urget. Points will be awarded.
Best Regards
Pradeep

Hi,
Please go through this link which will give you all details regarding compatibility and also how LSO can be accommodated within different versions:
http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
Hope this helps you, Thanks.
Regards,
Sridhar.

51 APs on voice vlan with 110 802.11 Handsets and 300 VoIP handsets?

There are 51 APs with 110 Symbol 802.11 voip handsets, along with 400+ Mitel VoIP Handsets on one vlan..using mask 255.255.240.0 should I be asking if this is excessive multicast traffic ?
Anyone used the IAPP with Aeronet? Any drawbacks, feedback? Should the APs/802.11 VoIP Phones be on their own vlan rather than the voice vlan?

Jason,
Let me answer your question with another question - RTP streams from your phones would be unicast, unless you were using applications like multicast paging or multicast MOH. Are there any of these applications present?
For seamless roaming, you will want the APs to be located on the same VLAN and use the same SSIDs and addressing scheme across your wireless infrastructure. You could separate it from your voice VLAN for segmentation purposes, so long as DHCP services and QoS is present on your APs and distribution switches on the wireless VLAN.
A quick estimation of the traffic involved is 7.04Mb/s if every phone was being used simultaneously with a G.711 codec. Bandwidth would generally not be an issue, but latency and jitter are your priorities. Depending on how your wireless network is laid out, you shouldn't have more then 8-12 phones associated to a single AP or jitter, latency and retransmissions will become an issue.
Hope this helps.
Pat

How do I create a new document in Photoshop CC and have it 300 dpi?

How do I create a new document in Photoshop CC and have it 300 dpi? I am doing digital scrapbooking and need to have my layout in Photoshop 12 x 12 so it is a scrapbook page and 300 dpi and I hope this doesn't sound stupid but I don't even know what dpi means.
Thank you

File>New
Set preset to print or US Paper
(typing width and height values will change the preset to custom)
Set width to 12 inches
set height to 12 inches
set ppi to 300 (should already be this if you used the print preset)
Click OK

How to change print size and DPI setting in Aperture

If I import a raw image from my camera (D2X) to Aperture and print the image at about 8"x10" through Aperture, it prints at about 300 DPI, if I change to size of the same image to 12"x18", in Aperture, it prints the image at about 166 DPI. I do not believe there is a way to change this in Aperture.
My question is, can I open the image at 8"x10" in PS, change the size and resolution to 12"x18" and 300 DPI then save it, open it again in Aperture and print it. If I do these things, will the image printed in Aperture still be 300 DPI and how can I check it to see if that is the case?
I have not been able to find the DPI setting anywhere in Aperture to confirm that it is what I want or need.

"You can make the pixels bigger by making the image larger but you can't add any more pixels without running some kind of interpolation filtration like GenuineFractals or a recomputation like bicubic."
Thank you for your explanation and that brings me exactly to the point of my question.
Can I interpolate my original NEF raw image after conversion by Aperture to a much larger image for print using something similar to what Photoshop does with it's bicubic smoother or as is done in genuine fractals or must I go out of Aperture and back if I want to print with Aperture. I am hoping you will tell me that Aperture is or will be capable of interpolating an image to a larger one with more than just the pixels supplied by the camera. I do not belive that these are not enough by themselves to print a quality image in a much larger size.
I may be wrong, but I believe that it is somewhat common practice to interpolate an image to get a greater resolution printed image at a size larger that what is possible with a resolution provided by the (D2x in my case) DSLR camera.
Or is this just a tempest in a teapot. In other words, will I be able to take the image out of the D2x (12.5 megapixels) and print a 13x 19" image with the same quality in Aperture (uninterpolated but enlarged) as an interpolated image in PS or Genuine Fractals and then in PS?
Thank you

72 dpi and 300 dpi

Similar Messages

Maybe you are looking for