720/24P conversion problem

Hey guys, I inadvertently pushed 720/24p instead of 24PN on my Pan HVX-200 and recorded 30 minutes in the pull down mode before I caught it. Now I need to get this footage into Final Cut Pro to edit along with the 24PN stuff I have. How does one go about converting 720/24P back to the native format? I have log and transfer on my FCP. How do you remove the 2:3 pulldown? Is there a setting?
Thanks so much.
Jane Pittman

The pulldown removal will be in this menu, in the LOG AND TRANSFER window...
Shane

Similar Messages

60i to 24p conversion problem-Compressor 3

I'm trying to do a conversion from 29.97 interlaced footage to 23.976 progressive. The results look good but the clip comes out 125% of its original duration. I don't want slow motion. On the frame control page i activate the button that says:
so source frames play at 23.98 fps. The button above that which says Set Duration to: is not activated, and its input field is empty. However when i finish the compression and come back and look at this saved setting, the button for duration is still not activated, but in its field, grayed out, is 125% of source. And this is what appears to have happened to my clip. It is 125% of source length. Converting frame rates is not supposed to affect duration, is it? Anybody know why this is happening?

Hi Tajuddin
Thanks for the response. Here is my LOV query. I am saving the SHIPTO_NAME which contains the ampersand from Page3 to an item on Page2 using the branch parameters. I may have said before it was on the button form but this case is using the branch form.
select distinct shipto_name dv, shipto_name rv
from data_mgr.custs
where jde_customer_type = 'CR'
and cust_channel_cd not in ('I','R')
and shipto_name not like 'AGENT HOUSE%'
order by 1
Assignments:
Set these: P2_AGENCY_NAME_DISPLAY
To : &P3_AGENCY_NAME.
The branch logic is conditional on the user pressing a 'Create New Contract' button that triggers this branch.
When Page2 is rendered the Agency Name shows the ampersand as '&' with the 'amp;' appended to it.
Thanks very much for your help.
-gary

30p-24p conversion problem

Hi,
Not sure if this is the right place to ask question;
A client has asked me to fix a video;
I was given a 1h 36m video that has gone through cinema tools to go from 30p to 24p, then it was put into compressor to speed up the audio. This method was taken from the Philip Bloom tutorial,
Philip Bloom Blog Archive How to convert Canon 5dmk2 footage from 30p to 24p...
The finished result is a (56g 24p Apple Interm Codec) video that is too slow. The video needs to be sped up.
The aduio/ video are in sync its just too slow. I was wondering if anyone had any suggestions as to how to speed up the whole file? The finished video needs to go onto DVD.
None of the original 30p footage is available all I have to work with is the 24p 56g file,
would compressor work if I change the timing from 01.36.13 to 01.05.13?? A bit of trial and error? I presume there must be a much easier way of doing this,
Any suggestions/ help with this would be greatly appreciated;
Cheers,
Daniel

You did a CONFORM didn't you? Does the Philip Bloom tutorial really tell you to use Cinema Tools and CONFORM? I find that odd, as what Conform does is turn your footage...frame for frame, from one speed to another. So 30fps converted frame for frame to 24fps, will be slower. This is one trick we use to get good smooth slow motion, NOT how to convert 30p footage into 24p footage that plays at the same speed.
And one major thing to note about this process is that it is DESTRUCTIVE. Meaning that it alters the original QT file. Which is why I tell people to duplicate the file first, as you can't go back once you do this.
So that Bloom Tutorial told you to use Cinema Tools to CONFORM the clip? Really? That seems like poor advice. And you don't have the camera original file? You MODIFIED the original file? Because the original is H.264, and FCP doesn't like to edit H.264, and that needs to be converted to ProRes before you can edit...so you didn't do that either?
Shane

What is the best way to work with AVCHD 720 24p footage in FCE4.1?

Hi I have a Panasonic HMC-150 and I've been shooting 720 24p footage at 21 mbps transfer rate.
I was wondering what is the best way to work with this material in FCE 4.1? I see that in the easy set up menu they only have the option of 1440X1080i at 50 or 60 fps or 1920X1080i at 50 or 60 fps.
Also in the rates drop down menu there is only 50 or 29.97.
So I was wondering which is the best choice for 720 24p footage and will it look alright in any of them? Also is it possible to customize these settings?
And finally can you work with faster transfer rates (21mbps) in FCE?

Yikes, this is going to be tricky since FCE does not support native 24p editing.
The work around for some of us is that AVCHD material that is 24p is often recorded to disc at 60i using telecine, in which case it can be editing at 29.97 frames per second, and then detelecined afterward for final export at 23.98 fps. The problem is that I think your camera actually records real 24p - not 24p packed into 60i. When you import the material from the camera what does QuickTime report the framerate as?

Ingesting AVCHD Footage into FCE (shot 720/24p)

Hi, I've been reading up a lot on various problems with ingesting AVCHD footage into FC Express. I'm using a Panasonic HM150 camera. I've transfered the footage from a SD Card reader to my Iomega 500GB external drive. We shot our footage at 720/24p. I tried to use easy setup for this, but there is no format for this in FCE 4.0.1. The best that I can do seems to be AVCHD 1080i. Can anyone assist me with how I can get FCE to ingest AVCHD footage shot at 720/24p and the exact settings I need to use to ensure correct ingestion? Upon trying to log and transfer it, I keep getting the red exclamation mark. Would this be because the settings are incorrect? I'm surprised that FCE doesn't have this particular setting since many people do shoot in the 720 mode.
Many thanks,
J.D.

Although FCE isn't designed to work with 24p footage, I've heard of a lot of people recently being able to ingest it anyway into FCE, but then getting stuck when it's time to put it into a sequence.
Click the gear button in the upper right of the Log and Transfer window, and navigate to the Preferences menu. Make sure Audio is set to *Plain Stereo* and click the button to *Clear the Cache.* Now try ingesting with your Easy Setup set to AIC 720p30. If it works, you can then use the free [MPEG Streamclip|http://www.squared5.com> to convert the capture scratch files to 29.97fps and edit them in FCE.
If it doesn't work, you may be able to use [Voltaic HD|http://www.shedworx.com/voltaichd] to convert from AVCHD to the Apple Intermediate Codec at 29.97fps for editing.
Message was edited by: skalicki`

720 24p FCP Settings

I just shot a film using the JVC GY-HD110. It shoots on HDV 720 24p miniDV tapes. I am about ready to capture and I wanted to make sure I had my setting right.
Seq: HDV-720p24 (23.98fps)
Capture: HDV-Apple ProRes 422
Device Control: HDV Firewire 24fps (I created this setting and changed the FPS to 23.98)
Are these correct? Any help or suggestions are appreciated.
cja

Be careful Chris. That workflow has some problems with later versions of FCS. Read the below post before you capture...
http://discussions.apple.com/thread.jspa?messageID=7166454&#7166454

Creating a new project in 24p: 24p conversion method

Good morning,
I have created a new project from scratch in 24p. I ensured that my settings were for appropriate to my configuration, i.e. DLSR 24p and more.
Everything displays that I am now working, per the below in 24p 1920 x 1080 on my info screen. Cool.
However, when I set up my new sequence defaults I get this slightly confusing checkbox option displayed below for my playback settings:
Is it true that the "24p conversion method" referred to in my playback settings within the sequence defaults refers to how any interlaced video I have will be converted into the 24p format?
Thanks,
Matt Dubuque, 100 Trees

Is it true that the "24p conversion method" referred to in my playback settings within the sequence defaults refers to how any interlaced video I have will be converted into the 24p format?
No, it dictates how 24p material will be displayed on a standard 29.97 playback device, such as a television or monitor that is displaying your Program Monitor output via a 1394 (aka FireWire) device. It's only for external monitoring; it has no effect on internal (that is, in the Program Monitor) playback.
The bottom line is that, unless you're using a connected DV device and monitor, you can ignore this setting.

DVCPRO HD Varicam capture of 720/24p (not 23.978)

Hi,
I was hoping someone could help me, im hiring in a AJHD-1400 deck to digitise some footage shot on the AJ-HDC27 Varicam. It was shot at 720/24p at 60hz meaning that the frame rate is true 24fps not 23.978fps.
I had limited access to one a while back but when trying to figure it out I was only about to capture out HD-SDI into a Kona 23.978 project, the Kona presets didnt have 720/24p.
The final cut pro does have a 720/24p DVCPRO HD but i couldnt get the deck to playout via firewire to capture it, not even sure if the frame convertor option works with this.
I know i cant get stuff into the Kona 23.978 project and can convert the off-speed footage this way but I would want to keep it at 24fps if at all possible otherwise the sound guys will have to restamp the audio I guess.
Any people done this or know how I would go about this I would love to hear from you
Running FCP 6.0.3 with Kona Lhe card
Best Regards,
Ian Grey

It was shot at 720/24p at 60hz meaning that the frame rate is true 24fps not 23.978fps.
Sorry, but you are mistaken. That camera does not shoot 24fps straight...nor does it record 24fps straight with pulldown. That camera only shoots 60fps...at 59.94. And then the 24p setting flags the footage as 23.98...so when you capture it with FCP it removes the pulldown to get you to 23.98.
I was only about to capture out HD-SDI into a Kona 23.978 project, the Kona presets didnt have 720/24p.
IMHO this is the best way to capture it into FCP...via a capture card as HD SDI. If you capture via firewire your video is off-sync from audio...audio leading by 2-3 frames typically. Plus if you shot 60fps meaning to slow it down later, the Kona captures it so it will properly do this, while with firewire you might get the error "this footage is not 59.94 fps" when it clearly is. And yes, there is a Kona preset for 720p24. It is called "AJA KONA 720p 23.98 DVCPRO HD Varicam." Again, that camera DOES NOT shoot straight 24fps. The only cameras that do, to my knowledge, are HDCAM and HDCAM SR...the F900 and F950 by Sony.
I would want to keep it at 24fps if at all possible otherwise the sound guys will have to restamp the audio I guess.
Audio was recorded at 24fps straight? Should be 23.98...although audio doesn't have a frame rate. Not sure what settings they set to make it match with video.
Shane

Conversion problem in PURCHASE ORDER

Hi all,
wrong conversion was done in Quantities/Weights tab of item overview during creation of Purchase Order,instead of putting order unit " 1 tonne = 1000kg" it was wrongly fix as "5 tonne = 4536kg", the order has been receive and issue , but during stock taking this conversion problem is giving wrong Quantity for the material in MB5B . Pls what can i do to resolve this.

Hi
If stock exists then kindly do the reverse process as below
1.Cancel material docuemt---MBST (Material document no and fiscial year)
2.Delete the P.O line items --Me22n
3.Enter the fresh line items in the same P.O
If partial stock Exists then do the Physical inventory process to adjust the Stock
Regards
Damu

How to debug file content conversion problems?

Hi,
I'm trying to debug a file content conversion problem. I'm mapping a few nodes in an IDOC to a file of fixed length fields. I'm using the "<Node A>.fieldFixedLengths", "<Node B>.fieldFixedLengths", "<Node C>.fieldFixedLengths", etc. parameters to specify the fixed length records.
However, a certain node (for e.g. Node B) is causing a problem and if it is present in the IDOC, the output file does not get created. Upon checking the XI monitor, I notice that the file gets mapped correctly and thus the problem lies when the file adapter does the file content conversion. How do I debug this because there is no descriptive error in the XI log? If this node is not present, the file gets generated fine.
Thanks,
Basant Gupta

Hi,
If your SXMB_MONI shows, success status, then go to RWB->Message Monitoring->Message display tool and then check Audit log for the analysis,
So it wil help you debug the situation.
If there is no error, then check RWB->Component Monitoring->Adapter Monitoring for you file communciation channel..
/people/michal.krawczyk2/blog/2005/01/02/simple-adapter-and-message-monitoring
Regards,
Moorthy

Oracle to Mysql character set conversion problem!!! PLZ IGNORE

Hi Experts,
I have created a database link from Oracle 10g to Mysql 5.
I have installed Oracle Gateway 11g for this purpose.
When i retreive the data from sql plus the text is displayed as question marks.
Oracle 10g Database character set is WE8MSWIN1252
Mysql character set --->latin1
Character set of ODBC connector for mysql is latin7
Character set in the parameter file of HS folder is WE8MSWIN1252When i retrieve data from sql developer the text is fine(as i think it directly takes the character set of target) but
when i login from sqlplus i get question marks!
I have another post in Heterogeneous Connectivity forum
Re: Oracle to Mysql character set conversion problem!!! PLZ HELP
Kindly update your comments there,
@@@@@@@@@@@@@@2
Appreciate your help,
regards
Edited by: user10243788 on Apr 21, 2010 3:25 AM

It is OK to post a globalization-related question in this forum in addition to the forum pertaining to the main technology. Not all experts follow all possible forums on OTN. Of course, you should cross-link the posts to let people merge the answers.
Regarding the problem itself, make sure that SQL*Plus has the right NLS_LANG setting in the environment. On Windows, in the Command Prompt:
C:\> set NLS_LANG=.WE8PC850
C:\> sqlplus ...On Unix:
$ setenv NLS_LANG .WE8ISO8859P1 (or NLS_LANG=.WE8ISO8859P1; export NLS_LANG)
$ sqlplus ...-- Sergiusz

Codepage conversion problem

Hello,
In a DB to DB scenario, I am getting this error "Error: Unexpected error converting database resultset to XML, codepage conversion problem?" on the side of the sender adapter. I am not able to see any messages or trace in IE-Monitoring. Is there any log wherein I can find out the problem as to where it is occuring?
Regards,
Sanjay

Hi Sanjay,
The JDBC sender adapter returns the rows selected from the database in the follwoing format.
<resultset>
<row>
<column-name1>column-value</ column-name1>
<column-name2>column-value</ column-name2>
<column-name3>column-value</ column-name3>
</row>
<row>
<column-name1>column-value</ column-name1>
<column-name2>column-value</ column-name2>
<column-name3>column-value</ column-name3>
</row>
</resultset>
This error occurs , when the source datatype you have created for the JDBC adapter does not match with this format. I would suggest that you check the source format along with the occurence of your field.
Regards,
Bhavesh

Raw conversion problem

I have Photoshop Elements 6 (Camera Raw 4.2) and a Nikon D7000 (Camera Raw 6.3 minimum). I am using DNG converter 8.1 to create DNG files, but these still will not open in Elements. I am selecting compatibility of Camera Raw 4.1 in the conversion program. What else can I do?

Sorry it took me a long time to reply. If I send to dropbox (which I can), can I restrict the images to specific email addresses, or will it be accessible to anyone? Not that I care about the image particularly, as it was only a test.
Once I have an idea of this, I will do a final test & send the data to dropbox.
Date: Wed, 19 Mar 2014 15:12:51 -0700
From: [email protected]
To: [email protected]
Subject: Raw conversion problem
    Re: Raw conversion problem
    created by ssprengel in Photoshop Elements - View the full discussion
It seems like you're doing everything that you're supposed to be doing, and it is not working. I don't have an explanation why that is, but can you share an original NEF and its DNG via www.dropbox.com or similar and others can test with a newer version of ACR to make sure there isn't something corrupted wtih the files.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6225513#6225513
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6225513#6225513
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6225513#6225513. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Journals conversion problem.

Hello,
We have a currency conversion problem with the journals table.
Steps:
1.- We insert a journal in Local Currency (LC) with the journals functionality. Both convert at average rate (for example), so when we run currency conversion rules the value is converted in Legalapp application, but not in Journal Table. So if the users or auditors need to see all the journals in EUR is not possible to extract with the journals reports.
2.- Also we have the problem when we apply the carry forward rules for the next year, and the RE-Open functionality. Example, the flow of the year N applies at average rate, when we make the carry forward rule it goes to Opening Balance flow, and this opening balance doesn´t have currency conversion rule (AS-IS)(we cannot use an OPEAVG rule because we need the historical value in the opening balance flow). So we lose the EUR position value because we don´t have a journal to apply the RE-OPEN functionality.
3.- We have the possibility of inserting the Journal in LC and EUR (Group Currency) also, but here you are obligating to the users to manually convert the values of each account of each journal, and can be mistakes of the value that the user insert in the Journal Entry, with the values of the application (converted with the currency conversion functionality).
Do you know how can we solve this error?
Regards,

Hi,
1. Journal tables contains just values for LC and only the posted journals are converted.
The Corrency conversion will be applied just for journal posted not for all journals.
You can see the value reflected into application just checking the the reports for special Data Source used by journal.
Journal module is used for adjustment which means the auditors can see the adjustment into local cuurency and just the final value posted. The rest of journal not posted has no importance because they don't have any impact for database values.
2. I don't think I understand the point which means I will leave other people to help ou with this poin
3. I don't understand why you have to run Currency Conversion manually.
When you input the journal you will execute default logic or you can execute journal.lgx logic.
In any of these module if you place currency translation you will have your figures automat converted.
Regards
Sorin Radulescu
Edited by: Sorin Radulescu on Dec 2, 2009 3:35 PM

Canon 7D 720/60p converted to 720/24p in Premiere Pro CS4

I've exhausted all my resources trying to find a simple answer but it seems like anything regarding 60p to 24p is about slow motion video which I already know how to do and understand thoroughly.
My question is, with my Canon 7D, there's no option for 720/24p (23.976), there's only 720/60p (29.97) or 50p. Getting 30p video is simple because Premiere just drops every other frame. Now 24p is a little trickier. There is an option for 1080/24p which is overkill for what I want and need to do. I also don't have the capacity in memory cards for that.
I understand that if I drop a 60p video on a 24p timeline, Premiere will just drop frames. But since 60 is not divisible by 24.. how does Premiere know which frames to drop? I believe there's also a Frame Blending option as well.. how would that work?
I'm looking for the best way to convert 60p video to 24p in Premiere. I can't imagine it being overly complicated.

quazis wrote:
Thanks for the reply but I'm not sure who told you that 1080p24 produces smaller file sizes than 720p60.
Canon 7D has a max recording limit of 4gb (per file) due to FAT32 file system restrictions. At 1080p, 4gb = 12minutes. On a 16gb card, that's only 48minutes. At 720p, 4gb = 30minutes. That's 2 hours.
Then it's Canon's encoding scheme or sensor use that makes such a huge difference. My AVCHD files from a Panasonic HMC150 are smaller at 1080p24 than at 720p60. Which makes sense since the raw pixel count per second is less with 1080p24 (49,766,400 at 1080p24 versus 55,296,00 for 720p60).
I have a tutorial on my web site about using dv2film, which is designed to convert 60i DV to 24p DV. But it also works for HD footage. Check it out and let me know what you think.
BDVS Tutorials
-Jeff

720/24P conversion problem

Similar Messages

Maybe you are looking for