720 UK in WHITE - availability

Hi,
As the subject says, any idea when the 720 will be available in white?
I promised a friend i'd get her this phone for her birthday and she wants it in white. Been waiting months now since it was released and feeling a little embarrased cos her birthday was a long time ago now.
Thanks.

Thanks again.
Shame, it seems like one of the key selling points of the Lumia line is the range of colours, yet it's been squandered by the networks. I'd hoped Nokia would get more support, seems all they care about is Android and getting these phones stocked in the first place is a much tougher battle than it should be for Nokia.
Not the route I want to go, but assuming nothing changes, how difficult would it be to fit this
http://www.ebay.co.uk/itm/GENUINE-Nokia-Lumia-720-Housing-Back-Chassis-With-Volume-Power-Buttons-Whi...
if I were to get a red or black one from o2?
Or do you think i'd be better off taking my chances with the white one from simpleelectronics?
Maybe I'll just try to persuade her to get a 925 instead, although that's going to be more expensive.

Similar Messages

Lumia 720 amber update not available

I am using Lumia 720.In Nokia support site it's showing update is available but when I try to update it's showing phone is up-to-date.I bought my phone from UAE and am now in India.plz help.
Solved!
Go to Solution.

Hi Kcc29,
Thank you for posting and welcome to the Nokia Support Discussions!
If I'm not mistaken, Mauritius is located on Africa right? You might want to check on this link: http://www.nokia.com/global/support/software-update/wp8-software-update/.
If you haven't got the update yet, you can try turning 'on' and 'off' the airplane mode on your phone by going to settings > airplane mode. Then try to connect to your router again and manually check for the update by going to settings > phone update. We ask you to be patient as the software update for the Nokia Lumia range are being released gradually.
Let us know the outcome.
Thanks!

LG G2 WHITE AVAILABILITY TO PURCHASE DATE

When will the LG G2 be available in white to purchase? I heard it was released on Thursday 11/14 but I have not seen it yet.

Hi PrincessTracy,
Anticipating the launch of new device can be a little furstrating. We do not currently have info on the launch of the white LG G2. You can stay up to date with our launches at www.vzw.com/news Let us know if we can help with anything else.
Thanks, BobbyS_VZW
Follow us on Twitter @VZWSupport

Intel graphics (945GM) and Kwin compositing not working.

I've done upgrade few months ago, and ever since then kwin compositing simply refuses to work. I'm currently running Xorg 1.8.1.902, have tried almost everything i could find on this forum (even wen't and rebuiild everything from scratch), but problem still persists.
I'm currently running Xorg without config.
glxconfig
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_INTEL_swap_event
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
GLX version: 1.4
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 945GME GEM 20100328 2010Q1 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.8.2
OpenGL extensions:
GL_ARB_copy_buffer, GL_ARB_depth_texture, GL_ARB_draw_buffers,
GL_ARB_draw_elements_base_vertex, GL_ARB_fragment_program,
GL_ARB_half_float_pixel, GL_ARB_map_buffer_range, GL_ARB_multisample,
GL_ARB_multitexture, GL_ARB_pixel_buffer_object, GL_ARB_point_parameters,
GL_ARB_point_sprite, GL_ARB_provoking_vertex, GL_ARB_shader_objects,
GL_ARB_shading_language_100, GL_ARB_shading_language_120, GL_ARB_shadow,
GL_ARB_sync, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_array_object,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_framebuffer_blit,
GL_EXT_framebuffer_object, GL_EXT_fog_coord,
GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays,
GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_provoking_vertex, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle,
GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
GL_APPLE_client_storage, GL_APPLE_packed_pixels,
GL_APPLE_vertex_array_object, GL_APPLE_object_purgeable,
GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
GL_ATI_separate_stencil, GL_IBM_multimode_draw_arrays,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_packed_depth_stencil, GL_NV_texture_env_combine4,
GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_OES_read_format, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
32 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8e 24 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x8f 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x90 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x91 24 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x92 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x93 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x94 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x95 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x96 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x97 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x98 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x99 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x9a 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x9b 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x9c 24 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9d 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9e 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9f 24 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa0 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa1 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa2 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa3 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa4 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa5 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa6 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa7 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa8 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0xa9 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xaa 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x5d 32 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
48 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x5e 0 tc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x5f 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x60 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x61 0 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x62 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x63 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x64 0 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x65 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x66 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x67 0 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x68 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x69 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x6a 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6b 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6c 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6d 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6e 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6f 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x70 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x71 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x72 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x73 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x74 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x75 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x76 0 dc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x77 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x78 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x79 0 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7a 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7b 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7c 0 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7d 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7e 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7f 0 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x80 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x81 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x82 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x83 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x84 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x85 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x86 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x87 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x88 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x89 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x8a 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x8b 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x8c 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8d 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
And xorg log
[ 22.410] X Protocol Version 11, Revision 0
[ 22.410] Build Operating System: Linux 2.6.34-ARCH i686
[ 22.410] Current Operating System: Linux lappy 2.6.34-ARCH #1 SMP PREEMPT Mon Aug 2 20:51:48 UTC 2010 i686
[ 22.410] Kernel command line: root=/dev/disk/by-uuid/ff8aedc5-5364-44a8-94d9-ecf230e30b00 ro
[ 22.410] Build Date: 21 June 2010 11:54:27AM
[ 22.410]
[ 22.445] Current version of pixman: 0.18.2
[ 22.445] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.445] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.446] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 16:35:11 2010
[ 22.613] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 22.720] (==) No Layout section. Using the first Screen section.
[ 22.720] (==) No screen section available. Using defaults.
[ 22.720] (**) |-->Screen "Default Screen Section" (0)
[ 22.720] (**) | |-->Monitor "<default monitor>"
[ 22.721] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 22.721] (==) Automatically adding devices
[ 22.721] (==) Automatically enabling devices
[ 22.857] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 22.857] Entry deleted from font path.
[ 22.890] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 22.890] Entry deleted from font path.
[ 22.890] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 22.890] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/
[ 22.890] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.890] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 22.891] (II) Loader magic: 0x81e9d00
[ 22.891] (II) Module ABI versions:
[ 22.891] X.Org ANSI C Emulation: 0.4
[ 22.891] X.Org Video Driver: 7.0
[ 22.891] X.Org XInput driver : 9.0
[ 22.891] X.Org Server Extension : 3.0
[ 22.921] (--) PCI:*(0:0:2:0) 8086:27ae:1043:8340 Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0xf7e00000/524288, 0xd0000000/268435456, 0xf7dc0000/262144, I/O @ 0x0000dc00/8
[ 22.921] (--) PCI: (0:0:2:1) 8086:27a6:1043:8340 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xf7e80000/524288
[ 22.922] (II) Open ACPI successful (/var/run/acpid.socket)
[ 22.922] (II) LoadModule: "extmod"
[ 23.101] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 23.133] (II) Module extmod: vendor="X.Org Foundation"
[ 23.133] compiled for 1.8.1.902, module version = 1.0.0
[ 23.133] Module class: X.Org Server Extension
[ 23.133] ABI class: X.Org Server Extension, version 3.0
[ 23.133] (II) Loading extension MIT-SCREEN-SAVER
[ 23.133] (II) Loading extension XFree86-VidModeExtension
[ 23.133] (II) Loading extension XFree86-DGA
[ 23.137] (II) Loading extension DPMS
[ 23.137] (II) Loading extension XVideo
[ 23.137] (II) Loading extension XVideo-MotionCompensation
[ 23.137] (II) Loading extension X-Resource
[ 23.137] (II) LoadModule: "dbe"
[ 23.138] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 23.147] (II) Module dbe: vendor="X.Org Foundation"
[ 23.147] compiled for 1.8.1.902, module version = 1.0.0
[ 23.147] Module class: X.Org Server Extension
[ 23.147] ABI class: X.Org Server Extension, version 3.0
[ 23.147] (II) Loading extension DOUBLE-BUFFER
[ 23.147] (II) LoadModule: "glx"
[ 23.148] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.176] (II) Module glx: vendor="X.Org Foundation"
[ 23.176] compiled for 1.8.1.902, module version = 1.0.0
[ 23.176] ABI class: X.Org Server Extension, version 3.0
[ 23.177] (==) AIGLX enabled
[ 23.177] (II) Loading extension GLX
[ 23.177] (II) LoadModule: "record"
[ 23.178] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 23.179] (II) Module record: vendor="X.Org Foundation"
[ 23.179] compiled for 1.8.1.902, module version = 1.13.0
[ 23.179] Module class: X.Org Server Extension
[ 23.179] ABI class: X.Org Server Extension, version 3.0
[ 23.179] (II) Loading extension RECORD
[ 23.179] (II) LoadModule: "dri"
[ 23.180] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 23.251] (II) Module dri: vendor="X.Org Foundation"
[ 23.251] compiled for 1.8.1.902, module version = 1.0.0
[ 23.251] ABI class: X.Org Server Extension, version 3.0
[ 23.251] (II) Loading extension XFree86-DRI
[ 23.251] (II) LoadModule: "dri2"
[ 23.252] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23.271] (II) Module dri2: vendor="X.Org Foundation"
[ 23.271] compiled for 1.8.1.902, module version = 1.2.0
[ 23.271] ABI class: X.Org Server Extension, version 3.0
[ 23.271] (II) Loading extension DRI2
[ 23.271] (==) Matched intel as autoconfigured driver 0
[ 23.271] (==) Matched vesa as autoconfigured driver 1
[ 23.271] (==) Matched fbdev as autoconfigured driver 2
[ 23.271] (==) Assigned the driver to the xf86ConfigLayout
[ 23.271] (II) LoadModule: "intel"
[ 23.271] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.374] (II) Module intel: vendor="X.Org Foundation"
[ 23.374] compiled for 1.8.1.902, module version = 2.12.0
[ 23.374] Module class: X.Org Video Driver
[ 23.374] ABI class: X.Org Video Driver, version 7.0
[ 23.375] (II) LoadModule: "vesa"
[ 23.375] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.389] (II) Module vesa: vendor="X.Org Foundation"
[ 23.389] compiled for 1.8.0, module version = 2.3.0
[ 23.389] Module class: X.Org Video Driver
[ 23.390] ABI class: X.Org Video Driver, version 7.0
[ 23.390] (II) LoadModule: "fbdev"
[ 23.391] (WW) Warning, couldn't open module fbdev
[ 23.391] (II) UnloadModule: "fbdev"
[ 23.391] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 23.391] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 23.392] (II) VESA: driver for VESA chipsets: vesa
[ 23.392] (++) using VT number 7
[ 23.401] (II) Primary Device is: PCI 00@00:02:0
[ 23.401] (WW) Falling back to old probe method for vesa
[ 23.404] drmOpenDevice: node name is /dev/dri/card0
[ 23.404] drmOpenDevice: open result is 9, (OK)
[ 23.427] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 23.427] drmOpenDevice: node name is /dev/dri/card0
[ 23.427] drmOpenDevice: open result is 9, (OK)
[ 23.427] drmOpenByBusid: drmOpenMinor returns 9
[ 23.428] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 23.428] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 23.428] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 23.428] (==) intel(0): RGB weight 888
[ 23.428] (==) intel(0): Default visual is TrueColor
[ 23.428] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[ 23.428] (--) intel(0): Chipset: "945GME"
[ 23.428] (==) intel(0): video overlay key set to 0x101fe
[ 23.454] (II) intel(0): Output VGA1 has no monitor section
[ 23.557] (II) intel(0): Output LVDS1 has no monitor section
[ 23.557] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 23.584] (II) intel(0): EDID for output VGA1
[ 23.687] (II) intel(0): EDID for output LVDS1
[ 23.687] (II) intel(0): Manufacturer: HSD Model: 3e9 Serial#: 172753
[ 23.687] (II) intel(0): Year: 2009 Week: 31
[ 23.687] (II) intel(0): EDID Version: 1.3
[ 23.687] (II) intel(0): Digital Display Input
[ 23.687] (II) intel(0): Max Image Size [cm]: horiz.: 22 vert.: 13
[ 23.687] (II) intel(0): Gamma: 2.20
[ 23.687] (II) intel(0): No DPMS capabilities specified
[ 23.687] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 23.687] (II) intel(0): First detailed timing is preferred mode
[ 23.687] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.317 greenY: 0.564
[ 23.688] (II) intel(0): blueX: 0.152 blueY: 0.131 whiteX: 0.310 whiteY: 0.330
[ 23.688] (II) intel(0): Manufacturer's mask: 0
[ 23.688] (II) intel(0): Supported detailed timing:
[ 23.688] (II) intel(0): clock: 45.0 MHz Image Size: 220 x 129 mm
[ 23.688] (II) intel(0): h_active: 1024 h_sync: 1077 h_sync_end 1112 h_blank_end 1200 h_border: 0
[ 23.688] (II) intel(0): v_active: 600 v_sync: 604 v_sync_end 609 v_blanking: 625 v_border: 0
[ 23.688] (II) intel(0): Supported detailed timing:
[ 23.688] (II) intel(0): clock: 51.4 MHz Image Size: 220 x 129 mm
[ 23.688] (II) intel(0): h_active: 1024 h_sync: 1117 h_sync_end 1152 h_blank_end 1240 h_border: 0
[ 23.688] (II) intel(0): v_active: 600 v_sync: 617 v_sync_end 622 v_blanking: 638 v_border: 0
[ 23.688] (II) intel(0):
[ 23.688] (II) intel(0):
[ 23.688] (II) intel(0): EDID (in hex):
[ 23.688] (II) intel(0): 00ffffffffffff002264e903d1a20200
[ 23.688] (II) intel(0): 1f13010380160d780a86269457519027
[ 23.688] (II) intel(0): 214f5400000001010101010101010101
[ 23.689] (II) intel(0): 010101010101941100b0405819203523
[ 23.689] (II) intel(0): 4500dc8100000019161400d840582620
[ 23.689] (II) intel(0): 5d231504dc8100000000000000fe0000
[ 23.689] (II) intel(0): 000000000000000000000000000000fe
[ 23.689] (II) intel(0): 00000000000000000001000000000045
[ 23.689] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 23.690] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 23.690] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 23.690] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 23.690] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 23.690] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 23.690] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 23.690] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 23.690] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 23.690] (II) intel(0): Printing probed modes for output LVDS1
[ 23.690] (II) intel(0): Modeline "1024x600"x60.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
[ 23.690] (II) intel(0): Modeline "1024x600"x65.0 51.42 1024 1117 1152 1240 600 601 606 638 -hsync -vsync (41.5 kHz)
[ 23.690] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 23.690] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 23.690] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 23.690] (II) intel(0): Output VGA1 disconnected
[ 23.690] (II) intel(0): Output LVDS1 connected
[ 23.691] (II) intel(0): Using exact sizes for initial modes
[ 23.691] (II) intel(0): Output LVDS1 using initial mode 1024x600
[ 23.691] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 23.691] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
[ 23.691] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
[ 23.691] (==) intel(0): DPI set to (96, 96)
[ 23.691] (II) Loading sub module "fb"
[ 23.691] (II) LoadModule: "fb"
[ 23.692] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.716] (II) Module fb: vendor="X.Org Foundation"
[ 23.717] compiled for 1.8.1.902, module version = 1.0.0
[ 23.717] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.717] (II) UnloadModule: "vesa"
[ 23.717] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.717] (==) Depth 24 pixmap format is 32 bpp
[ 23.717] (II) intel(0): [DRI2] Setup complete
[ 23.717] (II) intel(0): [DRI2] DRI driver: i915
[ 23.717] (**) intel(0): Tiling enabled
[ 23.717] (**) intel(0): SwapBuffers wait enabled
[ 23.717] (==) intel(0): VideoRam: 262144 KB
[ 23.717] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled
[ 23.735] (II) UXA(0): Driver registered support for the following operations:
[ 23.735] (II) solid
[ 23.735] (II) copy
[ 23.735] (II) composite (RENDER acceleration)
[ 23.735] (II) put_image
[ 23.735] (II) get_image
[ 23.746] (==) intel(0): Backing store disabled
[ 23.746] (==) intel(0): Silken mouse enabled
[ 23.746] (II) intel(0): Initializing HW Cursor
[ 23.776] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 23.799] (==) intel(0): DPMS enabled
[ 23.799] (==) intel(0): Intel XvMC decoder disabled
[ 23.800] (II) intel(0): Set up textured video
[ 23.800] (II) intel(0): Set up overlay video
[ 23.800] (II) intel(0): direct rendering: DRI2 Enabled
[ 23.800] (--) RandR disabled
[ 23.800] (II) Initializing built-in extension Generic Event Extension
[ 23.800] (II) Initializing built-in extension SHAPE
[ 23.800] (II) Initializing built-in extension MIT-SHM
[ 23.800] (II) Initializing built-in extension XInputExtension
[ 23.800] (II) Initializing built-in extension XTEST
[ 23.800] (II) Initializing built-in extension BIG-REQUESTS
[ 23.800] (II) Initializing built-in extension SYNC
[ 23.800] (II) Initializing built-in extension XKEYBOARD
[ 23.800] (II) Initializing built-in extension XC-MISC
[ 23.800] (II) Initializing built-in extension SECURITY
[ 23.800] (II) Initializing built-in extension XINERAMA
[ 23.800] (II) Initializing built-in extension XFIXES
[ 23.800] (II) Initializing built-in extension RENDER
[ 23.800] (II) Initializing built-in extension RANDR
[ 23.801] (II) Initializing built-in extension COMPOSITE
[ 23.801] (II) Initializing built-in extension DAMAGE
[ 23.943] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 23.943] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 23.943] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 23.944] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 23.944] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 23.944] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[ 23.944] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 23.945] (II) intel(0): Setting screen physical size to 270 x 158
[ 25.218] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 25.218] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.218] (II) LoadModule: "evdev"
[ 25.219] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.247] (II) Module evdev: vendor="X.Org Foundation"
[ 25.247] compiled for 1.8.0, module version = 2.4.0
[ 25.247] Module class: X.Org XInput Driver
[ 25.247] ABI class: X.Org XInput driver, version 9.0
[ 25.247] (**) Power Button: always reports core events
[ 25.247] (**) Power Button: Device: "/dev/input/event5"
[ 25.254] (II) Power Button: Found keys
[ 25.254] (II) Power Button: Configuring as keyboard
[ 25.254] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 25.254] (**) Option "xkb_rules" "evdev"
[ 25.254] (**) Option "xkb_model" "evdev"
[ 25.254] (**) Option "xkb_layout" "us"
[ 25.372] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 25.372] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 25.372] (**) Video Bus: always reports core events
[ 25.372] (**) Video Bus: Device: "/dev/input/event6"
[ 25.381] (II) Video Bus: Found keys
[ 25.381] (II) Video Bus: Configuring as keyboard
[ 25.381] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 25.381] (**) Option "xkb_rules" "evdev"
[ 25.381] (**) Option "xkb_model" "evdev"
[ 25.381] (**) Option "xkb_layout" "us"
[ 25.385] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 25.386] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.386] (**) Power Button: always reports core events
[ 25.386] (**) Power Button: Device: "/dev/input/event4"
[ 25.397] (II) Power Button: Found keys
[ 25.397] (II) Power Button: Configuring as keyboard
[ 25.397] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 25.397] (**) Option "xkb_rules" "evdev"
[ 25.398] (**) Option "xkb_model" "evdev"
[ 25.398] (**) Option "xkb_layout" "us"
[ 25.399] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 25.399] (II) No input driver/identifier specified (ignoring)
[ 25.400] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 25.400] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 25.400] (**) Sleep Button: always reports core events
[ 25.400] (**) Sleep Button: Device: "/dev/input/event3"
[ 25.404] (II) Sleep Button: Found keys
[ 25.404] (II) Sleep Button: Configuring as keyboard
[ 25.404] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 25.404] (**) Option "xkb_rules" "evdev"
[ 25.404] (**) Option "xkb_model" "evdev"
[ 25.404] (**) Option "xkb_layout" "us"
[ 25.408] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 25.408] (II) No input driver/identifier specified (ignoring)
[ 25.419] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event8)
[ 25.419] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 25.419] (**) USB 2.0 Camera: always reports core events
[ 25.419] (**) USB 2.0 Camera: Device: "/dev/input/event8"
[ 25.434] (II) USB 2.0 Camera: Found keys
[ 25.434] (II) USB 2.0 Camera: Configuring as keyboard
[ 25.434] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD)
[ 25.434] (**) Option "xkb_rules" "evdev"
[ 25.434] (**) Option "xkb_model" "evdev"
[ 25.434] (**) Option "xkb_layout" "us"
[ 25.452] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[ 25.452] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 25.452] (**) Eee PC WMI hotkeys: always reports core events
[ 25.453] (**) Eee PC WMI hotkeys: Device: "/dev/input/event7"
[ 25.463] (II) Eee PC WMI hotkeys: Found keys
[ 25.463] (II) Eee PC WMI hotkeys: Configuring as keyboard
[ 25.463] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD)
[ 25.463] (**) Option "xkb_rules" "evdev"
[ 25.463] (**) Option "xkb_model" "evdev"
[ 25.464] (**) Option "xkb_layout" "us"
[ 25.465] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 25.465] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 25.465] (**) AT Translated Set 2 keyboard: always reports core events
[ 25.466] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 25.478] (II) AT Translated Set 2 keyboard: Found keys
[ 25.478] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 25.478] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 25.478] (**) Option "xkb_rules" "evdev"
[ 25.478] (**) Option "xkb_model" "evdev"
[ 25.478] (**) Option "xkb_layout" "us"
[ 25.479] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 25.479] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 25.479] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 25.479] (II) LoadModule: "synaptics"
[ 25.480] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 25.661] (II) Module synaptics: vendor="X.Org Foundation"
[ 25.661] compiled for 1.8.0.902, module version = 1.2.2
[ 25.661] Module class: X.Org XInput Driver
[ 25.661] ABI class: X.Org XInput driver, version 9.0
[ 25.661] (II) Synaptics touchpad driver version 1.2.2
[ 25.661] (**) Option "Device" "/dev/input/event9"
[ 25.710] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 25.710] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 25.710] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 25.710] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 25.710] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[ 25.710] (**) Option "TapButton1" "1"
[ 25.710] (**) Option "TapButton2" "2"
[ 25.710] (**) Option "TapButton3" "3"
[ 25.746] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 25.746] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 25.770] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 25.770] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 25.770] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 25.770] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 25.770] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 25.803] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 25.804] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 25.804] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 25.804] (II) Synaptics touchpad driver version 1.2.2
[ 26.303] SynPS/2 Synaptics TouchPad no synaptics event device found
[ 26.303] (**) Option "Device" "/dev/input/mouse0"
[ 26.316] (**) Option "TapButton1" "1"
[ 26.317] (**) Option "TapButton2" "2"
[ 26.317] (**) Option "TapButton3" "3"
[ 26.337] Query no Synaptics: 6003C8
[ 26.337] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 26.337] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[ 26.376] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
[ 26.376] (II) UnloadModule: "synaptics"
[ 26.377] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 26.377] (II) No input driver/identifier specified (ignoring)
## HERE IS WHEN I TRY TO ENABEL COMPOSITING ##
[ 44.523] (II) intel(0): EDID vendor "HSD", prod id 1001
[ 44.523] (II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
[ 44.523] (II) intel(0): Printing DDC gathered Modelines:
[ 44.523] (II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
[ 44.523] (II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
[ 62.938] (II) intel(0): EDID vendor "HSD", prod id 1001
[ 62.938] (II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
[ 62.938] (II) intel(0): Printing DDC gathered Modelines:
[ 62.938] (II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
[ 62.938] (II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
[ 64.643] (II) intel(0): EDID vendor "HSD", prod id 1001
[ 64.643] (II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
[ 64.643] (II) intel(0): Printing DDC gathered Modelines:
[ 64.643] (II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
[ 64.643] (II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
[ 65.290] (II) intel(0): EDID vendor "HSD", prod id 1001
[ 65.290] (II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
[ 65.290] (II) intel(0): Printing DDC gathered Modelines:
[ 65.290] (II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
[ 65.290] (II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
Anyone have some advices on how to solve it, or maybe just some pointers where the problem could lie? I'm starting to run out of ideas.
EDIT: Sorry if there is already another identical thread posted somwhere, i couldn't find it.
Last edited by n00bz (2010-08-06 14:16:48)

Vamp898 wrote:
try this
rm .kde4/share/config/kwinrc
That solved it!!! Thank you!!!

Need help in understanding of a certain errormessage

Hello everybody,
I get the following error message:
"Kein Speicher der Länge 720 für OCCURS-Bereich verfügbar"
( I assume in English that would be: "No Memory of Lenght 720 for OCCURS-Area available")
Can anyone give me a hint what that means and what I can do to avoid this error?
Regards

Is this happening when you open Crystal Reports Designer or a report?
Check your anti-virus software or possibly your firewall, CR tries to get to our home page to update the Start Page of the designer with links to updates, samples etc.
Don

Remotely stop\start your Windows Dialog Instance from System i CI

Hi All,
Is there a way to remotely stop and start your Dialog Instance running on Windows from your system 'i' Central Instance?
Thanks,
Diana

Hello Diane,
We thought about the situation and came to the conclusion, that with the 720 DCK the restriction of only starting/stopping IBM I remote instances with one STARTSAP/STOPSAP call can be dropped.
The new note 1644051 will describe what to do.
Here is a short summary:
You have to apply the 720 DCK to all instances of your SAP system following note 1636252. Also follow this note to obtain info when 720 DCK will be available for all SAP Systems newer than SAP NetWeaver 7.0 ("7.00") without restrictions.
You have to apply at least the 720 dw patch #67 to all instances (all platforms).
You have to apply at least the 720 ILE Patch #111 (I think this will be the number, but for the official number wait for note 1644051) to all IBM I hosted instances.
Of course the first stack kernel available after complete 720 DCK availability will contain all patches needed.
Please remove any additional stuff from the START profile which you added to start/stop remote windows Instances along with your central Instance.
Then you can call
STARTSAP SID(<sapsid>) INSTANCE(ALL) INSTHOST(ALL)
STOPSAP SID(<sapsid>) INSTANCE(ALL) INSTHOST(ALL)
to start and stop really all instances out of the box.
Kind Regards
Joachim

HVX200 speed changes in FCP . . .HELP!

So confused here . . . I appreciate any help people can offer . . .
Shot footage with HVX200 in 720p/24p mode at various frame rates (12,18,48,60). Trying to use it alongside my DVCPRO50 project footage (with the speed changes of course). I imported the P2 clips into my project, they appear to have retained the proper frame rate: 59.94fps. But when I put them into my DV50 29.97fps timeline they of course need rendering, but they DON'T play back at their proper speeds. They look more or less the same. Any idea why this is so?
I KNOW that I should have shot in the 720p/24pn mode so that the excess frames would have been removed for 29.97 playback, but I tried using the Panasonic/Apple DVCPROHD Frame Conversion tool and NOTHING happens. I follow the instructions to a T, select the clip in the bin, select the plug-in from the tools menu and NOTHING happens at all, no message, no chime, nothing. I'm running FCP 5.1.2 in OS 10.48, Quicktime 7.13 — everything is up to date. ANY IDEA what I've done wrong? I even tried re-importing the 720 clips to no avail.

Welcome to the forums.
Shot footage with HVX200 in 720p/24p mode at various frame rates (12,18,48,60). Trying to use it alongside my DVCPRO50 project footage
You do realize that you are using HD footage in a standard def project, right? And that the camera does shoot DVCPRO 50. Just curious.
I imported the P2 clips into my project, they appear to have retained the proper frame rate: 59.94fps. But when I put them into my DV50 29.97fps timeline they of course need rendering, but they DON'T play back at their proper speeds. They look more or less the same. Any idea why this is so?
If you drop the footage into a 29.97 timeline and render, it will play back at 29.97fps...it won't slow down or speed up. That is not how you adjust the speed. I often get footage shot 720p60, and if I want to just mix it with my other 720p24 footage, I drop it into the timeline and render. However, if I want it to be slow motion, I use the DVCPRO HD Frame Rate Converter.
But you said you tried that and nothing happened...so try this trick. Create a new project and copy the clips into that project, THEN try the converter. It is an odd bug, but that is what I do and it works great.
For more information, I blog about my experiences working with P2 and DVCPRO HD in general. CLick on Underdog to get there.
Shane

After upgrading to Yosemite, iphoto has a white symbol across it indicating it needs to be upgraded. When at the app store the install option is not available?

After upgrading to Yosemite, iphoto has a white symbol across it indicating it needs to be upgraded. When at the app store the install option is not available?

What version of iPhoto do you have?
iPhoto Upgrade under Mavericks see post by Old Toad

Oracle Berkeley DB Java Edition High Availability (White Paper)

Hi all,
I've just read Oracle Berkeley DB Java Edition High Availability White Paper
http://www.oracle.com/technetwork/database/berkeleydb/berkeleydb-je-ha-whitepaper-132079.pdf
In section "Time Consistency Policy" (Page 18) it is written:
"Setting a lag period that is too small, given the load and available hardware resources, could result in
frequent timeout exceptions and reduce a replica's availability for read operations. It could also increase
the latency associated with read requests, as the replica makes the read transaction wait so that it can
catch up in the replication stream."
Can you tell me why those read operations will not be taken by the master ?
Why will we have frequent timeout ?
Why should read transaction wait instead of being redirect to the master ?
Why should it reduce replica's availability for read operations ?
Thanks

Please post this question on the Berkeley DB Java Edition (BDB JE) forum Berkeley DB Java Edition. This is the Berkeley DB Core (BDB) forum.
Thanks,
Andrei

Datamodeler - Naming Standards - technical white paper no longer available?

Hi,
I am wondering, is this document no longer available?
http://www.oracle.com/technology/products/database/datamodeler/pdf/DataModelerNamingStandards.pdf
I a m trying to learn how to apply Naming standards in data modeler but i cannot retrieve this document.
On the datamodeler homepage, on tab "Documentation"
clicking "Naming Standards (Technical White paper - pdf)"
keeps me redirecting into the tab "Overview"
regards,
E.
As I look at the content description of this document(i found that content description somewhere on the www), i believe i would find it very helpfull
Contents of this Oracle SQL Developer Data Modeler Naming Standardization reference guide
Introduction ............ 1
Overview . 2
Defining Templates for Keys, Indexes and Constraints....... 3
Applying the Templates to the Relational Model ............. 5
Prefix Management ........... 6
Setting Name Patterns for Elements..... 7
Defining Word Classification Types .. 8
Supporting Naming Patterns with SQL Developer Data Modeler ... 8
Reviewing Separator Settings for Elements in a Logical Model ..... 9
Reviewing Additional Settings for Elements in a Relational Model . 9
Using a Glossary .. 10
Defining Glossaries ......... 10
Using the Glossary Editor 10
Importing Glossaries........ 12
Importing a CA Erwin Data Modeler Naming Standard Glossary . 13
Using Abbreviations............. 13
Using the Name Abbreviations Utility............. 14
Name Translation . 16
Setting Model Level Name Restrictions ............. 18
Using Design Rules Validation Related to Naming Standards ......... 19
Conclusion ........... 20
Resources ............ 20

it's temporary problem and document will be available soon.
Meanwhile you can look at this thread Data Modeler: Naming
Philip

SAP Business Objects and IBM i White Paper available

The "SAP Business Objects and IBM i" White Paper is available on IBM Techdocs under the follwing URL:
[http://www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/WP101947]
The SAP Business Objects and IBM i white paper describes how the SAP Business Objects Enterprise XI server fits into an SAP on IBM i landscape. The paper provides detailed instructions showing how to integrate data sources located on an IBM i server with SAP Business Objects.
Feel free to post your feedback and comments.
Thanks and Regards,
Mirco
Edited by: Mirco Malessa on Jul 14, 2011 1:11 PM

Hi ,
Please find these blogs by Ingo. This should help you.
BusinessObjects and SAP - Installation and Configuration Part 1 of 4
Install Part #1
BusinessObjects and SAP - Installation and Configuration Part 2 of 4
Install Part #2
BusinessObjects and SAP - Installation and Configuration Part 3 of 4
Install Part #3
BusinessObjects and SAP - Installation and Configuration Part 4 of 4
Install Part #4
BusinessObjects and SAP - Configure SAP Authentication
SAP Authentication
BusinessObjects Integration with SAP NetWeaver BI - Technical Material
Thanks,
Gopi

White BlackBerry Z30? When will it be available?

Just as described in the Subject, when will the "WHITE" BlackBerry Z30 be available in Canada? From BELL, Rogers and/or Telus?
Thank You,

The White Z30 is now available on ShopBlackBerry.com (although I believe shipping only to the USA).
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

When will the white note edge be available

When will VZW make the Frosted White Note Edge available?

Usually black and or white are sold as available color options first. In this case, I would imagine that, if another carrier does not already have an exclusive right to one color, that it would be available at a later date, usually a few months into the life of a device after its release. I reference the LG G3 and how Red was introduced 6 months after release during a short-lived promotion and also, how Best Buy sold a blue model whereas other carriers or dealers did not.

When will the white ipod touch be available in stores?

when will the white ipod touch be available in stores, if known then would it be available at best buy?

The new iPod has just begun shipping to people that ordered them online directly from Apple. Expect another 2-3 weeks at least before stores have them.

The basic sliders disappeared. Including the Exposure, Contrast, Highlights, Shadows, Whites, Blacks, Clarity and Vibrance Sliders are no longer available. I need help to get them back

The basic sliders disappeared. Including the Exposure, Contrast, Highlights, Shadows, Whites, Blacks, Clarity and Vibrance Sliders are no longer available. I need help to get them back on the program.
I can't figure out where the sliders went and how to put them back on. Anyone have any suggestions?
Thanks

In Lightroom, go to the Window menu, select Panels, select Basic

720 UK in WHITE - availability

Similar Messages

Maybe you are looking for