7200 as centralized network service platform

I'm about to gain a 7206VXR that's being decommissioned from its current purpose and plan to utilize it not for routing, but to provide centralized services to other routers in the enterprise. My initial thoughts are as a primary NTP server and an IOS Certificate Authority server.
Does anyone have experience with the 7200 platform as an NTP server using an external GPS time source through the AUX port? I've read that this is a platform-specific capability of the 7200 series and wanted to get some feedback about real-world experience. The two possible locations are in a data center (thick cement walls, tons of possible sources of interference) and on a middle floor of a 70-story skyscraper (in the center of the building). Would any of the compatible GPS receivers be able to get a signal in either location? Are any of the GPS devices better than the rest?
Beyond NTP and CA functionality, what other services would be worth exploring for this router? We're running a traditional (AKA very little above basic configuration of routers) WAN and looking to start using the functionality available in the gear we already have out there. If a 7200 would be a good platform to host some enterprise service other than NTP and CA, I'd love to know how else it could be useful.
Thanks.
-Mason

Binary Image TFTP server

Similar Messages

  • Setting Network service as the apppool account

    Hi,
      I need to set the Network Service as the apppool account for one web app. I did it from IIS and then gave dbowner permmission in config db but still no luck. Giving error cannot connect to database.
    Please assist.

    You should always use a Domain User for services in SharePoint, as many of them need to contact Active Directory for various reasons. That said, service accounts should be configured via Central Admin -> Security -> Manage Service Accounts.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Sharepoint 2013 search error - The search application 'Search Service Application 1' on server is not provisioned.Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running on the server.

    Hi All,
    I'm getting the below error in My SHarepoint 2013 search Administration page.
    Crawler background activity - The search application 'Search Service Application 1' on server ""  is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running
    on the server.
    and when i click on Crawl Log and content source
    it throws the below error
    The search service is currently offline. Visit the Services on Server page in SharePoint Central Administration to verify whether
    the service is enabled. This might also be because an indexer move is in progress
    When i check the search status
    Get-SPEnterpriseSearchServiceInstance, it shows all the components are online.
    As of now search service application is online and search is working.But not sure why it throws the above error.
    I have restarted timer service,search service in services.msc and cleared the sharepoint cache as well.
    But no luck,This is happening in my prodcution environment.
    Any help will be greatly appreciated.
    There are the logs i have found
    05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.73 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djs2 High [Forced due to logging gap, cached @ 05/23/2014 13:03:22.76, Original Level: VerboseEx] {0} d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.80 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General 8nca Medium Application error when access /_admin/search/listcontentsources.aspx, Error=The search service is currently offline. Visit the Services
    on Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.   at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
    sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()    
    at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
    step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Runtime tkau Unexpected Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on Server page in SharePoint Central
    Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.    at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)    
    at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
    Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()    
    at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
    step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on
    Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
    sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()    
    at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
    step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General aat87 Monitorable  d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
    - Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm.     at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
    http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3-c3e4-4097-85fd-aa5248346d2e d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e)).
    Execution Time=109.695855199474 d4c6939c-b10d-4000-6d95-14caeefe67df
    Anil Loka

    Please try below mentioned steps:
    1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
    2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
    3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
    http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
    4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
    5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
    Please ensure that you mark a question as Answered once you receive a satisfactory response.

  • I want to use Back to my mac. When I try to turn it on, it says "Back to My Mac may be slow because more than one device on your network is providing network services.   Turn off NAT and DHCP on one of the devices and try again." How do I fix this?

    Not sure if I am doing this right. This is my first time in the support community.
    I imagine what I put in my heading was supposed to go in here.
    I want to use Back to my mac. When I try to turn it on, it says "Back to my mac may be slow because more than one device on your network is providing network services. Turn off NAT and DHCP on one of the devices and try again. See the documentation that came with your device for information about turning off network services"
    Does anyone know how I do this? I contacted my ISP (Telus in Canada) and they did not know anything (not that they usually do).

    Why do ISPs insist upon making things so difficult for their customers?
    If you cannot get them to understand that you would prefer to use your own router over their piece of cheap junk, perhaps the information in the following will be useful:
    http://keithbalomben.wordpress.com/2012/03/29/telus-actiontec-v1000h-hacks-and-i nformation/
    Scroll down to DHCP Settings
    You will need to log in with proper "technician" credentials. They are provided in the above link as
    Username: tech
    Password: t3lu5tv
    ... but these may or may not work. Try it, and if you cannot get anywhere at least now you know what to ask Telus to do in return for your business.

  • Remote access and network services problem

    I have a Mac Pro with two IP configs:
    Ethernet 1: 69.##.##.## /255.255.255.248 [hidden for public forum security]
    Ethernet 2: 10.0.0.20/255.255.255.0
    My primary needs:
    Able to remotely access the Mac via Remote Desktop using the public IP. Local LAN connectivity using 10.##.##.##.
    Setup:
    I have a 10 public IP address from my ISP and using one of the 10 now. Everything pings OK.
    Question:
    How can I customize the network service so that I can select the Ethernet 1 or Ethernet 2 port to use? So far it forces me select Ethernet 1 for all of the services selected. I'd like to use FTP & Web Server & Remote Access on the Ethernet 2 (public). The rest is LAN. I notice that Appletalk is only allowable on a single IP.
    Quick experiment with the Internet sharing using Ethernet 2 (public) to Ethernet 1 failed to provide the desired forwarding result.
    Mac Pro   Mac OS X (10.4.9)  

    I think you need to go further into the settings and define FTP etc. to the specific Ethernet. There are also settings Automatic and where you define your connection. I have a 3 inch book that I will look at to see if they address it. I to plan to do something similar, but haven't got there yet.
    Michael

  • Deployment issue - Login failed for user 'NT AUTHORITY\NETWORK SERVICE'

    I am attempting to deploy a site from my development PC to my server. I have no issues running the site on the server using VS2010 Express Web in debug. All page queries are working within the debugger. The connection strings are identical between the PC
    and Server, except the host name.
    connectionString
    ="Data
    Source=SOCIALSERVER;Initial Catalog=Intake_be;Integrated Security=True"
    However, when using the site normally via IIS, the pages containing data access are failing with a permissions problem. The non-data access pages render normally.
    Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
    Looking at the SQL2005 instance via SQL Management Studio, I see security folder with Logins under the Server. NTA\NS is listed as a user login. But, I also see similar folders under each
    of 3 databases. NTA\NS is not listed as a login specific to my target dB.
    My site is for internal (intranet) use only. There is no internet access into my IIS. This is my first deployment into production. I think I only need Windows Authentication but I lack the experience to make a good decision. My goal is to allow domain users
    to access pages that produce read only data. But, I also need controlled access to pages that can modify data. I used the native winform template for ASP.NET 4, which includes some roles based security.
    How do I grant permissions for internal users on the pages that access SQL data? How does that security model work with the native roles based security? i.e.
    add
    name="AspNetSqlMembershipProvider"type="System.Web.Security.SqlMembershipProvider"connectionStringName="ApplicationServices"...
    etc.
    Thanks for your time and patience on this Deployment 101 type issue.
    Kurt

    hi,
    You receive either of these error messages specifically when you use integrated security.
    To resolve you can use one of below.
    Method 1: Programmatically change the security context of the ASP.NET worker process to a user who has the correct SQL Server permissions.
    Method 2: Change the default configuration of ASP.NET so that the ASP.NET worker process starts and runs under the context of a user who has the correct permissions in SQL Server.
    Method 3: Grant the correct permissions in SQL Server so that the ASPNET account (or NetworkService account, for an application that runs on IIS 6.0) has the appropriate access to the required resources.(Go to the Computer Management >> Local User and
    Groups >> Groups >> Right Click and go to properties on IIS_IUSRS >> Add appropriate user.
    Thanx, Mark as answered if you are ok ..

  • HT1178 I bought Time Capsule specifically to back up my computer at work. Only my computer. I completed the steps the best of my knowledge but I got the message, "This device & its network services will be temporarily unavailable. Are you sure you want to

    I bought Time Capsule specifically to back up my computer at work. Only my computer. There are many computers within my department. I completed the steps the best of my knowledge but was unsure of which option to click. I clicked "I want to create a new wireless network". At the onset the instructions said I needed to connect with an ethernet cable, which I did. But I have no desire to connect to the internet, print from it, or have others access. I did deselect guest options, and I did put in passwords. But at the end of the process I got the message, "This device & its network services will be temporarily unavailable. Are you sure you want to continue."
    I was worried this would shut me down and I wouldn't be able to continue to work. I don't necessarily need to connect wirelessly. It is connected via ethernet cable from machine to device.
    Can you advise me how to continue? Did I choose the wrong options?

    I bought an external hard drive called "Seagate Backup Plus" From the Apple store to back up everything on my computer and anything new on my computer. It came with Time Machine. The external hard drive disk had 1 or 2 Terabytes. Time Machine says "next backup: When disk is connected." "Oldest backup: July 2, 2014." & Also "Latest back July, 2."

  • Enabling Network Services not working PLEASE HELP

    Hello,
    I created a virtual machine with the Oracle_Developer_Day.ova file downloaded from oracle page in order to test the application express tool.
    I´m trying to ad a webservice reference but getting the error:
    ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1130 ORA-24247: network access denied by access control list (ACL)
    I researched and find out that oracle 11g does not have network services enabled so you have to enable them with the following script:
    DECLARE
    ACL_PATH VARCHAR2(4000);
    ACL_ID RAW(16);
    BEGIN
    -- Look for the ACL currently assigned to '*' and give APEX_030200
    -- the "connect" privilege if APEX_030200 does not have the privilege yet.
    SELECT ACL INTO ACL_PATH FROM DBA_NETWORK_ACLS
    WHERE HOST = '*' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL;
    -- Before checking the privilege, ensure that the ACL is valid
    -- (for example, does not contain stale references to dropped users).
    -- If it does, the following exception will be raised:
    -- ORA-44416: Invalid ACL: Unresolved principal 'ADMIN'
    -- ORA-06512: at "XDB.DBMS_XDBZ", line ...
    SELECT SYS_OP_R2O(extractValue(P.RES, '/Resource/XMLRef')) INTO ACL_ID
    FROM XDB.XDB$ACL A, PATH_VIEW P
    WHERE extractValue(P.RES, '/Resource/XMLRef') = REF(A) AND
    EQUALS_PATH(P.RES, ACL_PATH) = 1;
    DBMS_XDBZ.ValidateACL(ACL_ID);
    IF DBMS_NETWORK_ACL_ADMIN.CHECK_PRIVILEGE(ACL_PATH, 'HR',
    'connect') IS NULL THEN
    DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(ACL_PATH,
    'HR', TRUE, 'connect');
    END IF;
    EXCEPTION
    -- When no ACL has been assigned to '*'.
    WHEN NO_DATA_FOUND THEN
    DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('power_users.xml',
    'ACL that lets power users to connect to everywhere',
    'HR', TRUE, 'connect');
    DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('power_users.xml','*');
    END;
    COMMIT;
    ***Note: I have a workspace called HR and a user called HR.
    I run the script and everything works fine but when I try to add the webservice reference I get the same error.
    I don´t know what to do and my time to fixing this problem is ending so please if someone can help me I would really appreciate it.
    THanks in advance

    Hi Luis,
    You will find the script for the relevant releases in the respective installation guides of their releases.
    Here is the script for Oracle APEX 4.1 and its sub-version releases:
    DECLARE
      ACL_PATH  VARCHAR2(4000);
    BEGIN
      -- Look for the ACL currently assigned to '*' and give APEX_040100
      -- the "connect" privilege if APEX_040100 does not have the privilege yet.
      SELECT ACL INTO ACL_PATH FROM DBA_NETWORK_ACLS
       WHERE HOST = '*' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL;
      IF DBMS_NETWORK_ACL_ADMIN.CHECK_PRIVILEGE(ACL_PATH, 'APEX_040100',
         'connect') IS NULL THEN
          DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(ACL_PATH,
         'APEX_040100', TRUE, 'connect');
      END IF;
    EXCEPTION
      -- When no ACL has been assigned to '*'.
      WHEN NO_DATA_FOUND THEN
      DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('power_users.xml',
        'ACL that lets power users to connect to everywhere',
        'APEX_040100', TRUE, 'connect');
      DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('power_users.xml','*');
    END;
    COMMIT;
    Refer : http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21673/otn_install.htm#BEHGBHDF
    Here is the script for Oracle APEX 4.2 and its sub-version releases:
    DECLARE
      ACL_PATH  VARCHAR2(4000);
    BEGIN
      -- Look for the ACL currently assigned to '*' and give APEX_040200
      -- the "connect" privilege if APEX_040200 does not have the privilege yet.
      SELECT ACL INTO ACL_PATH FROM DBA_NETWORK_ACLS
       WHERE HOST = '*' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL;
      IF DBMS_NETWORK_ACL_ADMIN.CHECK_PRIVILEGE(ACL_PATH, 'APEX_040200',
         'connect') IS NULL THEN
          DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(ACL_PATH,
         'APEX_040200', TRUE, 'connect');
      END IF;
    EXCEPTION
      -- When no ACL has been assigned to '*'.
      WHEN NO_DATA_FOUND THEN
      DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('power_users.xml',
        'ACL that lets power users to connect to everywhere',
        'APEX_040200', TRUE, 'connect');
      DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('power_users.xml','*');
    END;
    COMMIT;Refer: http://docs.oracle.com/cd/E37097_01/doc/install.42/e35123/otn_install.htm#BEHGBHDF
    Hope it Helps!
    Regards,
    Kiran

  • Network.service won't boot

    Hi there,
    I just installed arch on my Thinkpad t42p which has a ipw2100 wireless chip. I configured the whole network manually and a corresponding systemd entry. Sometimes the network comes up at boot at sometimes it doesn't. When it doesn't boot I still can start it manually with
    # systemctl start network
    Why could it be that it sometimes boots and sometimes it doesn't?
    Last edited by dead_kenny (2012-11-10 08:35:03)

    Thx for the link skunktrader. Now I fixed the matter by asining a udev rule to the network interfaces as described in the wiki.
    Now I installed arch on an ASUS notebook where the interfaces don't shift during boot but there the network.service also won't boot. I have to start the service manually after boot. The output of
    systemctl /usr/lib/systemd/systemd
    doesn't present the Network Connectivity until I start it manually. Could there be another reason for this? E.g. driver starts to late? How should I look for why systemd cannot start boot the network.service?

  • Apple TV 2 Waiting for network services, unable to sign in to iTunes store

    Received my Apple TV yesterday.
    It is connected to my network (I have tried wired and wireless).
    I can view movie previews and Podcasts.
    I cannot sign in to the iTunes Store (therefore cant rent movies), cannot view Youtube videos (No content available), cannot use Netflix (Waiting for network services when I try).
    I spoke to Apple support, they couldn't help. They say the problem is with my network or my ISP.
    I have a Linksys WRT160N router, on which I have tried disabling the firewall.
    My ISP is Telus, I am on their Fibre Optic network in BC. I wonder if Telus are blocking Apple TV?
    Anyone else experiencing this?
    Message was edited by: gbcecanada
    Message was edited by: gbcecanada

    I received my Apple TV yesterday.
    I am running cable internet with 10Mbps constant.
    So I connected it up and proceeded to issue after issue. I could not log into my Apple account. It was stating that my name or password was incorrect.
    When I would start the unit it would stay at the waiting for network connections screen for several minutes!
    I did all the tricks of turning the apple of and back on, NO FIX.
    I tried to update the software, and I recieved a message that stated I have the most updated software, so....NO FIX
    I did a full restore. The Apple TV downloaded the newest software and rebooted after about 7 minutes, NO FIX
    I logged into my router and opened all ports, added ports 80 and 123, NO FIX
    I also disabled my entire firewall on my router and turned off the WEP security feature...and what would you guess.....NO F I X!!
    So I logged back into my router and reset all my original settings...still NO FIX.
    SO here is the good part...Apparently the system has to connect to time.apple.com and get updated...it's sort of like a verification of the system.
    So after it updated everything worked great! No unable to sign into my account. NO waiting on network connections anymore.
    So the biggest advice I can give, especially after my 3 hours of gradually wasting my time until I almost threw the unit out my bedroom window, is connect it to your WIFI system and let it sit by itself for a few hours and let it connect to the Apple server.
    Hope this helps everyone that, at some point, has shared my pain and frustration.

  • Operation timed out (FSP network services manager)

    Received this error from five different RMAN jobs, all submitted at approx 6am, all failing within a couple of minutes. Resubmit of all five jobs worked fine. Many other jobs submitted at approx the same time worked fine. Time out does not appear to be related to waiting on tape drive resources.
    Any ideas as to cause? If this is a network thing, any way to extend the timeout or cause it to retry?
    Regards,
    Rich McClain
    ORA-19506: failed to create sequential file, name="SBT_TAPE/RMAN_SCMP.707724115.arch.1.7372.1", parms=""
    ORA-27028: skgfqcre: sbtbackup returned error
    ORA-19511: Error received from media manager layer, error text:
    sbt__rpc_cat_query: Query for piece SBT_TAPE/RMAN_SCMP.707724115.arch.1.7372.1 failed.
    (Oracle Secure Backup error: 'operation timed out (FSP network services manager)').
    Snippet from obroxyd.log
    2010/01/08.06:02:57 [2543] failed to connect to admin scheduler - operation timed out (FSP network services manager)
    2010/01/08.06:03:02 [2543] client disconnect from IPC connection 4 (closing)
    2010/01/08.06:03:03 [2543] obproxyd is terminating now
    2010/01/08.06:03:11 [9770] failed to connect to admin scheduler - operation timed out (FSP network services manager)
    2010/01/08.06:03:16 [9770] client disconnect from IPC connection 4 (closing)
    2010/01/08.06:03:16 [9770] obproxyd is terminating now

    Either reconfigure CONNECT_TIMEOUT to be 0, which means wait indefinitely, or reconfigure CONNECT_TIMEOUT to be some higher value. Or, if the timeout is unacceptably long, turn on tracing for further information.
    If you have oracle metalink, then read the following note;
    Note:119706.1 - Troubleshooting Guide TNS-12535 & ORA-12535 Errors

  • Restart Network services

    I hope this isn't a repost but I was wondering if there is a way to restart network services in leopard, similar to this command in linux:
    /etc/init.d/networking restart
    I want to troubleshoot my connection to the router in my home, and my linux install works after giving this command, but leopard is having trouble.
    Thanks
    hah nevermind I found what I need
    Message was edited by: Dak

    Try this
    $ sudo ifconfig en0 down
    $ sudo ifconfig en0 up
    Use en1 for your AirPort card

  • Integrate Central Authentication Service (CAS) in SharePoint 2010

    Hi All,
    Going to implement Single sign one, with all internal application,
    Also some application is running in SharePoint, I want to integrate Central Authentication Service (CAS)
    in SharePoint 2010.
    Pls give me some idea. 
    Deepak

    You can do CAS and SharePoint auth using below
    Check below
    http://webcache.googleusercontent.com/search?q=cache:EhC3JLvqDWwJ:balendrant.blogspot.com/2013/05/external-authentication-providers-for.html+&cd=4&hl=en&ct=clnk&gl=in&client=firefox-beta
    http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=9&ved=0CFEQFjAI&url=http%3A%2F%2Fdownload.microsoft.com%2Fdocuments%2FFrance%2FInterop%2F2010%2FFederated_Collaboration_With_Shibboleth_2_0_and_SharePoint_2010_technologies-1_0.docx&ei=i0u1U6bVB4KMuATP94II&usg=AFQjCNF09JusWUS97-em12JFpaH64Pxa3A&bvm=bv.70138588,d.c2E&cad=rja
    If this helped you resolve your issue, please mark it Answered

  • After sql server 2012 installation, I have changed sql server database engine service account from network service user to system user. What is disadvantages of this process?

         After
     sql server 2012 installation, I   attached my production db. Because of some reasons, i
     changed sql engine account from network service user to system user by means of sql server configuration manager.
         Now , there isn’t
     a problem at sql server running system.  But
    I have doubts that
     this can produce problems later. Because  sql server database engine account must have privileges that listed below;
    Log on as a service (SeServiceLogonRight)
    Replace a process-level token (SeAssignPrimaryTokenPrivilege)
    Bypass traverse checking (SeChangeNotifyPrivilege)
    Adjust memory quotas for a process
    (SeIncreaseQuotaPrivilege)
    Permission to start SQL Writer
    Permission to read the Event Log service
    Permission to read the Remote Procedure Call service
     While sql server installation, setup gives these
     privileges to network service user automatically, but changing user by means of sql confugarition manager does not give these
    privileges.
    Now, system user has privileges listed below. And sql server has been running for 1,5 months without any problems.
    Log on as a service (SeServiceLogonRight)
         Bypass traverse checking
    (SeChangeNotifyPrivilege) (Everyone user has his privileges. So i think that system user has this privilege also)
    What problems can occur because of this situation? Shall i give other privileges to system user and restart sql server or not? And how can i give these privileges to system user listed below;
    Replace a process-level token (
    this can be set from user rights assignments)
    Adjust memory quotas for a process
    (this can be set from user rights assignments)
    Permission to start SQL Writer ( 
    ? - give advice )
    Permission to read the Event Log service (
    ? - give advice )
    Permission to read the Remote Procedure Call service (
    ? - give advice )

     Our server is  windows server 2008 r2 enterprise edition. I have looked the bunch of permissions in user rights menu  that is in local security policy settings gui.
    And i have seen those permissions below were not granted to system user;
    Bypass traverse checking (SeChangeNotifyPrivilege)
    Adjust memory quotas for a process
    (SeIncreaseQuotaPrivilege)
    So, briefly you say, don't panic ?

  • I am unable to see following SQL Server Analysis Services in central admin services after the SQL 2014 power pivot installations

    I am unable to see following SQL Server Analysis Services  in central admin services after the SQL 2014 power pivot installations
    Ravi

    Hi Ravi,
    Per my knowledge, there is no Analysis Service in SharePoint.
    After running the SQL 2014 setup to install PowerPivot for SharePoint, you need to open the PowerPivot for SharePoint 2013 Configuration tool in Central Admin Server and configure PowerPivot for SharePoint.
    After that, you will see new Service Application called "Default PowerPivot Service Application" in Central Administration.
    If you have other WFE servers, then you need to install the PowerPivot Add-In on all the other servers in the SharePoint farm.
    More references:
    http://sridharbabuk.blogspot.jp/2013/02/installing-configuring-analysis-service.html
    http://msdn.microsoft.com/en-us/library/jj219067.aspx
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

Maybe you are looking for