720IX Raid Monitor software when using Hyper-V

Rd650 Server 720iX raid, Running hyper V Server with 3 sets of raid,
Raid is created properly, installed my 1st Vm of Win2012 R2 Virtual but I also want to monitor the raid, but since it's virtual I'm not sure how to set this up.
I instaleld "Graphics-based Management Utility for LSI SWR / HWR for RHEL / SLES Linux & Windows OS - ThinkServer Systems "
which I'm not sure is the correct monitor to view the raid, but non the less it can't detect the raid card. or see the raid.
Does anyon have any tips on how to monitor my raid on a hyper V server 2012?

Configure CSV backups
If you are running Hyper-V on Windows Server 2008 R2 and you’re backing up multiple clusters with DPM, you need to ensure that only one backup uses the same CSV at any one time. To do this, follow the instructions in
Serialize virtual machine backups.
If you’re using software VSS with Hyper-V on Windows Server 2008 R2, do the following
Serialize virtual machine backups per node
Serialize virtual machine backups per CSV LUN
Have a nice day !!!

Similar Messages

Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Cluster

Hi,
Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Hyper-V Cluster with CSV's? Can't find a clear answer somewhere.
Thanx for helping me out.
DJITS.

Configure CSV backups
If you are running Hyper-V on Windows Server 2008 R2 and you’re backing up multiple clusters with DPM, you need to ensure that only one backup uses the same CSV at any one time. To do this, follow the instructions in
Serialize virtual machine backups.
If you’re using software VSS with Hyper-V on Windows Server 2008 R2, do the following
Serialize virtual machine backups per node
Serialize virtual machine backups per CSV LUN
Have a nice day !!!

Intel SpeedStep & TurboBoost stops working when using Hyper-V

Hi guys,
Several times my CPU speed got "stuck", not using SpeedStep or TurboBoost (i5, Ivy Bridge). Finally, I found out it happens when I use Hyper-V. Sometimes, not always. But after the next restart, the CPU won't change the speed anymore. Thus wasting battery and loosing performance. Looks like a bug to me. But if it's Microsoft or Lenovo, who knows...
The event log is as follows:
The speed of Hyper-V logical processor 0 is being limited by system firmware.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Processor-Power" Guid="{0F67E49F-FE51-4E9F-B490-6F2948CC6027}" />
<EventID>37</EventID>
<Version>1</Version>
<Level>3</Level>
<Task>7</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-01-02T04:20:34.648024800Z" />
<EventRecordID>127825</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="3644" />
<Channel>System</Channel>
<Computer>Charly13</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="Group">0</Data>
<Data Name="Number">0</Data>
<Data Name="CapDurationInSeconds">1</Data>
<Data Name="PpcChanges">2</Data>
<Data Name="TpcChanges">0</Data>
<Data Name="PccChanges">0</Data>
</EventData>
</Event>
If I helped you, please give me some kudos! ^^

Bump? :'(
If I helped you, please give me some kudos! ^^

Having Issue with Service Monitor Report when using Oracle DB

Hi,
I set up Oracle XE to store monitoring and message data for Service Monitor. I configured the Database Connection in Policy Studio, and deployed the configuration. When starting the Service Monitor, I got "There are no reporting nodes configured." error.
Here is the detailed message:
INFO 27/Jan/2012:13:13:54.155 [ed46fa00] thread set netsvc threadpool drained
INFO 27/Jan/2012:13:13:55.074 [ed46fa00] rolling file logs/ConfigurationManagementAuditTrail.xml stopped
INFO 27/Jan/2012:13:13:55.078 [ed46fa00] Shutting down Policy Director Manager
INFO 27/Jan/2012:13:13:55.093 [ed46fa00] rolling file trace/ServiceMonitor.trc stopped
[oracle@EDCPR16P0 bin]$ ./oegservicemonitor
INFO 27/Jan/2012:13:13:59.896 [911baa00] Attempting to connect to entity store at federated:file:////u01/app/oracle/oeg11g/oegservicemonitor/conf/fed/configs.xml
INFO 27/Jan/2012:13:14:03.014 [911baa00] Realtime monitoring disabled
INFO 27/Jan/2012:13:14:03.016 [911baa00] Storing metrics in database disabled
INFO 27/Jan/2012:13:14:03.781 [911baa00] cert store configured
INFO 27/Jan/2012:13:14:03.785 [911baa00] keypairs configured
INFO 27/Jan/2012:13:14:03.791 [911baa00] Initializing server
INFO 27/Jan/2012:13:14:04.423 [911baa00] Attempting to connect to repConfig entity store at file:/u01/app/oracle/oeg11g/oegservicemonitor/conf/repConfig.xml
INFO 27/Jan/2012:13:14:04.455 [911baa00] There are no reporting nodes configured.
INFO 27/Jan/2012:13:14:04.456 [911baa00] Initializing report file format transformer
INFO 27/Jan/2012:13:14:13.005 [911baa00] Server initialized
INFO 27/Jan/2012:13:14:13.206 [911baa00] TCP interface
INFO 27/Jan/2012:13:14:13.206 [911baa00] checking invariants for interface *:8040
INFO 27/Jan/2012:13:14:13.206 [911baa00] listen on address 0.0.0.0/8040
It looks like the repConfig.xml file needs to be updated. If so, what elements? Anything else i am missing?

You need to add a Gateway node the service monitor.
To do this browse to http://HOST:8040/
Using the default port, you can connect to the Service Monitor interface in a browser, where HOST points to the IP address or hostname of the machine on which Service Monitor is installed.
Right mouse click and add the Gateway node.

Raid/Scratch Querries When Using WIth Photoshop

I am about to purchase a Mac Pro 3GHZ and am looking into options with raiding the hard drives. I use my mac for high end photoshop retouching and want to get the best possible performance from the hard drives when saving and openning large files.
I am going to keep the system hard drive seperate, but purchase 2 additional Caviar SE 250 GB hard drives and set up a striped array (Raid 0) for my large working files. However, I am aware that to create an effective scratch disk it is best to partition the hard drive so as not to be detrimental to the main HD and cause fragmentation.
Because I am raiding the 2 Caviar hard drives will it be a mistake to use it as a scratch as well? Obviously the scratch speed would improve but would it affect the performance of the read/write speed of the hard drive for working files? Is it even possible to partition a raid drive and is it advisable? I am not looking to purchase a seperate HD for the scratch as I feel this would be a bit of a waste of money.
Mac Pro 3 GHZ Mac OS X (10.4.8)

The way I would actually configure a Photoshop workstation is to have…
1) Western Digital Raptor 10K 150GB RAID 0 pair for Mac OS X and scratch
2) Maxtor MaXLine Pro 500GB RAID 0 pair for data and secondary scratch
Now, I have to admit this would not be the cheapest setup although it would kick you know what.

Setting Photoshop monitor profiles when using dual displays?

I'm using a Macbook Pro connected to an Apple Cinema Display under OS 10.5.8. Both monitors are calibrated and I export from Lightroom to Photoshop in ProPhoto. The Photoshop working colour space is also ProPhoto so there is no mismatch there.
When in dual display mode I like to have my Photoshop application on the Macbook screen and the photo I'm working on shown on the Cinema Display. In fact, I couldn't work any other way because the laptop's screen is not at all suitable for precision work.
I noticed that when I send an image from Lightroom to Photoshop CS4 for further editing the colours were off in Photoshop. This lead me to check the monitor profile used by Photoshop and I saw it was using the Macbook Pro .icc profile. This seems to be used even if the image is displayed in the external display. Selecting the Cinema Display as "default" in ColorSync doesn't change the situation. As a result, the colours as displayed by Photoshop are incorrect.
The only "solution" I have found is to either go to System Preferences > Displays and select the external monitor as the principal one (which is inconvenient because it negates many of the advantages of using dual monitors) or setting the Cinema Display's .icc profile for the Macbook Pro as well (which makes it the one chosen by Photoshop but means I'm only working wiht one correctly calibrated monitor).
Is there a solution to this problem? Ideally I want to have both my monitors calibrated and Photoshop detect which one I'm using to view my photo. Failing that, I would like to have both monitors calibrated and "tell" Photoshop to use the Cinema Display as the principal monitor.I don't want .
Many thanks!

Thanks for your reply!
I'm not too worried about 10.6 because I'm not using it ( I reverted to 10.5.8 precisely because of the colour issues).
I don't really understand your reply. My problem is that if Photoshop uses my Mabook Pro profile as the "monitor profile" my pictures - as displayed on the Cinema Display - look different in Lightroom and in Photoshop. It's as if Lightroom is "aware" of which of the two displays is being used whereas Photoshop can only deal with one at a time. I would like to know if this analysis is correct and what I can do so that Photoshop displays my photographs the same way as Lightroom does on each of my two displays.

IPV4 gone when using Hyper-v

Hello,
I have multiple hyper-v machine's running on my Windows 8.1 professional, for my education. I just checked my ipv4 address and i noticed that i don't have an ipv4 address. I do have Internet and a working connection but i cant seem to set a staticipv4 address.
I do need a staticipv4 address since i also use my PC as a media server.
I have 3 network adapters:
- 1 physical adapter, connecting the Ethernet cable to my machine
- 1 Hyper-v external card, connecting my virtual NAT router to the Internet
- 1 Hyper-v Internal card, connection all my virtual machines together.
Please help.
Kind regards,
Rvoosterhout

Yes with DHCP i have working Internet connection.
When I copy and enter my static IP, with the exact data i got from my DHCP server:
IP 192.168.1.102 (scope 100 until 200)
SNM: /24
DFGW: 192.168.1.1
DNS: 212.54.44.54 (my isp's DNS address)
When i enter this data as a static IP, I lose my Internet connection, also when i try a different IP address.
What I did right now is assign a static IP to my mac address in my Router. Now i'll wait 8 hour to see if I keep the same IP address, then it's also solved

VM Activation problem when using Internal Virtual Switch mode

Hello,
I have setup Windows 2012 R2 Standard Version host machine. Hyper-V setup successful. Host machine already activate license.
I have got a problem is when VM connecting with Internal virtual Switch. It will not able to process Windows activation. If it connected using External Virtual Switch, it can successful do windows activation. However, using External Virtual
Switch, one more WAN IP will be used.
I am using ICS method to share the network interface to Internal Virtual Switch.
Is it what problem and how to resolve it?
Thanks!

Hi Gyorgy,
What is the version of your guest operating system? Why not we create an External Virtual switch to access Internet when using Hyper-V guest system? (Some reference if needed:Hyper-V Virtual Switch
Overview )
The network connection seems to be fine, if you mean the webpage can't be displayed through Internet Explorer, please take a look at the article below:
"Internet Explorer cannot display the webpage" error
For more information, please check:
Fixing "Page cannot be displayed"
Best regards
Michael Shao
TechNet Community Support

WVC200 Audio issues when used with Monitor software

I use a number of WVC cameras and when I view them through a browser, the audio works fine. When I use the Linksys "monitor" software, i have a continuous echo/noise problem. Is there a fix to this or am i limited to watching them one at a time through a browser??
Solved!
Go to Solution.

Hi.
These products are being handled by the Cisco Small Business Support Community.
*If my post answers your question, please mark it as "Accepted Solution".
*Don't forget to give "Kudos". Thanks!

How to blank laptop screen when using external monitor/

Hi there
I need some help with figuring out how to configure my xorg.conf for my Arch Linux 64 bit installation on a HP Pavilion dv 5000 laptop so that I can automatically blank my laptop screen when using an external monitor. I have Arch Linux installed along with Ubuntu Feisty. In Ubuntu my external monitor (Viewsonic 1912WB) was not detected at the time of installation but with the native 1280X800 resolution that is good for the laptop takes effect for the external monitor automatically when the external monitor is plugged in. The laptop monitor goes blank when the external monitor is plugged in.
In my Arch Linux installation I have not been able to configure a dual head configuration using the ATI Radeon drivers (fglrx). I have the native 1280X800 resolution set up for the laptop monitor and this resolution takes effect for the external monitor also. However the laptop monitor also continues to function when the external monitor is plugged in. I would like to blank the laptop monitor when using the external monitor.
I am attaching my Arch Linux xorg.conf and the Ubuntu xorg.conf below. Thanks for anyone who can help, I am having a lot of difficulty in figuring out how to set up xorg.conf among all the things that I have had to learn so far in Linux and I am a relative newcomer to the whole thing. I have tried to compare the two xorg.conf files and edit my Arch xorg.conf in accordance with the Ubuntu one but it did not work and I keep getting errors!
I am using XFCE as my Desktop environment.
Arch Linux xorg.conf
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# Files section. This allows default font and rgb paths to be set
# Server flags section.
# Input devices
# Core keyboard's InputDevice section
# Core Pointer's InputDevice section
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
# Mode 0666
# EndSection
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option    "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# Load "xtt"
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option    "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option    "XkbRules" "xorg"
Option    "XkbModel" "pc104"
Option    "XkbLayout" "us"
EndSection
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option    "Protocol" "Auto" # Auto detect
Option    "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
Option    "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
EndSection
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "My Monitor"
HorizSync 30.0 - 62.0
VertRefresh 50.0 - 70.0
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option    "VendorName" "ATI Proprietary Driver"
Option    "ModelName" "Generic Autodetecting Monitor"
Option    "DPMS" "true"
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "* Generic VESA compatible"
Driver "vesa"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "* Generic VESA compatible"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x800" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x800" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Ubuntu xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
Driver "ati"
BusID "PCI:1:5:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection

Xrandr 1.2 provides means for this. But today the only supported configuration is xorg-server-1.3 + xf86-video-intel-2.0. So for Radeon you'll have to wait for drivers that support Randr 1.2.
On my laptop (Thinkpad x60s) that would be:
xrandr --output VGA --auto
xrandr --output LVDS --off

Premiere Pro keeps crashing when using overwrite (.) shortcut in Source Monitor

When editing a clip in the source monitor and then using the (.) key to overwrite the clip onto my timeline Premiere Pro keeps crashing. If I select the Timeline window and then press the (.) key it works fine, but if the Source Monitor is highlighted and I press (.) it crashes every time and shows these windows:
Premiere Pro has encountered an error.
[/Volumes/BuildDisk/builds/mightykilt/shared/
adobe/Mediacore/Backened/Make/Mac/../../Src/
Sequence/LinkContainer.cpp-184]
and then opens this one:
Adobe Premiere Pro
Sorry, a serious error has occured that requires
Adobe Premiere Pro to shut down. We will attempt to
save your current project.
It saves my current project as a copy, which is good, but I've now ended up with lots of copies of the same project as it keeps on crashing. In order to work I have to make sure that the Timeline is highlighted before I use the shortcut. It makes for very precarious and tense editing!
I've tried to update my system (I have the Production Premium Suite), but it came up with this:
Adobe Bridge CS6 5.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Extension Manager 6.0.5 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Prelude CS6 1.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Photoshop 13.0.5
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Photoshop Camera Raw 8.1(CS6)
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
DPS Desktop Tools CS6 26.0.0 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Illustrator CS6 Update (version 16.0.4)
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Dynamic Link Media Server CS6 1.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe SpeedGrade CS6 6.0.4 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe InDesign CS6 8.0.1 update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe After Effects CS6 11.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Fireworks CS6 update to improve Mac 10.8 platform compatibility and resolve usability bugs.
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Media Encoder CS6 6.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Audition CS6
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Premiere Pro CS6 6.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Flash Pro CS6 update 2
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
I'm using a MacBookPro 15", OS X 10.8.4 and editing footage filmed at 24fps 1920x1080 on my Canon 550D/T2i. All .MOV files.
I purchased my software from iSoftware.co.uk. I'm worried that could be the problem.
Any help would be hugely appreciated. Thank you.
Sam

A crash with a very similar error message was fixed in the new CC release. The bug report in that case involved creating a multi-cam sequence, so it might not be directly related.
If you have a chance to download the CC trial, we'd be interested to know whether the crash remains in the new version.

How to switch off internal macbook screen when using external monitor(s)

as far as i observed, adding external displays ( running different screens on them, not mirroring) to a macbook pro increases the gpu workload and with that comes temperature rise in the laptop and increase in ventilator noise - and probably increased hardware aging and risk of component faillure due to high temperature inside the laptop.
simply try connecting two external 27" screens and open some flash video on both of them. then run a temperature monitoring software and watch temps rise, compared to running same flash videos / demanding tasks only on one connected external screen or only on the laptop screen with no external monitor connected.
especially in mavericks, due to its increased background routines, such a set-up appears ever the more taxing, then again who does not love apple`s nice adds showing laptops with two 27” screens connected to it and the workspace vision they invoke....
i have seen temps around 100° to 102° celsius on a 13" macbook pro 2012 edition, which i would expect is territory where the cpu / gpu temp safety switches will trigger system shutdown any time soon ( hardware status before verified as fully in order by apple service and default osx installation)
imagine your anti-virus software starting some realtime content screening while runnign some demanding tasks already and the system shuts down easily (all such situation observed in reality)
(would be interesting to see how a retina display macbook fares with 2 external monitors running demanding tasks, considering the retina display already increased taxing for the gpu - any experience from users of such a setup would be very much appreciated as it will provide critical purchase decision intelligence for all of us envisioning a retina-book and two big screens adoring our desks...)
turning down the macbook`s built-in screen`s backlight may reduce power consumption but i have not seen any evidence that it switches off the gpu-to-screen feed and respective gpu load - it certainly did not prevent gpu, cpu, board, etc temps to rise to borderline levels.
so the key question here is, how to switch off the macbook pro`s built-in screen in order to avoid gpu cycles being wasted on that screen ( and the resulting heat developments) when working with big external screen(s) connected to the laptop ?

this thread talks about running several monitors as advertised by apple and running demanding task on them.
with the lid open, the keyboard offers a very efficiant heat escape vector, which is blocked when the lid is closed - this is a basic and commonsense insulation effect. this thread also mentions the use of temperature monitoring software and thus a repeatable test setup. the temps recorded were also mentioned. they rose when the lid was closed, the running task remaining unchanged. as far as i could track down the cpus in discussion will shut down around the 105 degree celsius range. i observed system shut downs when the system approached 103° celsius. not to mention that the fans will run loud well before that.
again this is on hardware checked and ok-ed by apple service.
the question still welcoming an expert answer: is there any way to switch off the built-in macbook monitor while the lid is open ?

Access Denied Error Opens when Installing HP Monitor Software (Windows 7)

im getting the following error trying to upgrade my screen driver.
"Access Denied Error Opens when Installing HP Monitor Software (Windows 7)"
I found this error in the help area but it doesnt address the problem, it simply describes the device manager instalation procedure, which I am using , and which results in the error.

Hi debgibson,
What is the monitor model number and what is the PC model number?
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

How can i do this, Check to see if you have any network monitoring software that might be using your iCloud account

How can i do this, Check to see if you have any network monitoring software that might be using your iCloud account to automatically send messages, such as firewalls or internet security software configured to send an alert when a potential security issue

you can try:
*Wireshark: http://www.wireshark.org/download.html

Often lose wireless connection when using HDTV as monitor

I have an unusual wireless networking problem when using my Samsung HDTV in my living room as a monitor for my MacBook (when watching Internet TV shows, for example). Frequently when I switch URLs, networking freezes, even though the connection appears strong, with the Airport symbol at the top of my screen showing all bars. To re-establish the wireless connection, I have to go through the process of re-joining my network through the “Join Other Network" option. The signal holds as long as I don’t try to change it, as in selecting another URL.
I connect to my HDTV via HDMI cable, using a mini-DVI to HDMI adapter from my Macbook’s video-out port. The audio connection is a mini-plug from the Mac’s headphone out jack to stereo RCA plugs associated with the TV’s HDMI port.
The wireless connection is through a Lynksys Wireless-G 2.4 Ghz, 54 Mpbs Broadband router.
I’d appreciate any solutions the Apple user community has to offer.

I'd say this has nothing to do with your display. The problem will likely lie in either your router settings, network settings or a simple signal strength issue. Try first changing the broadcast channel on your router, and make sure all settings are correct for your desired network.

720IX Raid Monitor software when using Hyper-V

Similar Messages

Maybe you are looking for