7210 Unable to see HBA card

Hi, I'm intent to using FC rather than network. Already upgrade the storage to 2010.02.09.1.0,1-1.15 version.
Then, i install a 2x Qlogic HBA ( SG-XPCIE1FC-QF4), but the storedge unable to recognized it. From BIOS i can see the Qlogic have been detect.
From shell mode, run cfgadm ( the HBA card not detect).
Here some logs,
boot with "-v" ( Able to see the HBA detect as qlc0 and qlc1)
PCI Express-device: pci10de,377@a, pcieb2
pcieb2 is /pci@2,0/pci10de,377@a
PCIE-device: pci1077,142@0, qlc0
qlc0 is /pci@2,0/pci10de,377@a/pci1077,142@0
PCI Express-device: pci10de,375@b, pcieb7
pcieb7 is /pci@2,0/pci10de,375@b
PCIE-device: pci1077,142@0, qlc1
qlc1 is /pci@2,0/pci10de,375@b/pci1077,142@0
fp0 is /pci@2,0/pci10de,377@a/pci1077,142@0/fp@0,0
fp2 is /pci@2,0/pci10de,375@b/pci1077,142@0/fp@0,0
But after fully up.. unable to see tha HBA cards. So i cannot create the FC target devices as not HBA shown up.
Please Help

Hi,
You know which file should i modified.. i already check /etc/driver_aliases, seem all aliases is there, modinfo currently load all the qlc module
and prtpicl already see the devices also /dev/cfg which already create c8 with HBA symbolic links.
Im now, it just the HBA wont bind to driver.. maybe cause the file you mention.

Similar Messages

Unable to enable HBA Card in the Cisco UCS c22 m3 server

Hi All,
I need your help desperately to setup the cisco ucs c22 m3 server in our environment. We have a C22 M3 server and I did the basic config of CIMC and we have a LSI megaraid controller connected to one of the PCIe and the other PCIe has a dual port 8gb HBA card. We installed the RAID and we can see the LSI Megaraid controller. But I cannot see the HBA card and there is noo light near the card. I hope I need to enable something so that the card should work. I tried enabling in the BIOS menu I can see the PCIe slot is enabled but I am unable to see the HBA functioning. Couldyou pleasehelp me to resolve this.

Dear Manuel,
Thanks for replying me. See the answers for your queries.
What kind of HBA card are you trying to use?
If I am not wrong we are using "Qlogic QLE2562, 8Gb dual port Fibre Channel HBA".
How many CPUs do you have installed on your server?
I opened the box and saw only 1 CPU installed. But the solution is given by CISCO pre sales. We have 2 PCIe slots configured. One for LSI RAID controller and the other with dual port Fibre Channel HBA.
Awaiting your reply.
Thanks and Regards,
Jaffer Ali

I loaded some pics from my SD card and then I loaded some from my iPhone. But I am unable to see the pics from my SDcard in iPhotos.

I loaded some pics from my SD card and then I loaded some from my iPhone. But I am unable to see the pics from my SDcard in iPhotos.

I think it is 7.1.1 - there was another update today which I've uploaded but it didn't make any difference. It's just the music libary on the 5 that's causing me problems.

HT5622 I'm unable to see none as an option while entering card details.

I'm unable to see "none" as an option.I don't own a mastercard or visa credit card.Is there no way to download free apps?

You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps

Unable to see files or write to external SD card since 4.3 upgrade

HI. I have an external SD card plugged in to my SIII.
It's been working great for months.
A week or so ago, an upgrade was pushed down to my phone, 4.3 to be exact.
Since then I can't see files on my external SD card.
If I plug a cable into my computer and browse to my phone's external card I can see them on my PC.
I've searched around and backed up my files, unmounted, reboot, remount. Reformat the card, unmount & remount.
No change.
I've formatted the SDcard on a PC and no difference.
Is anyone else experiencing this?
The card is a SanDisk Ultra 64gb microSD card, but it really isn't card specific.
I put my older 16gb card that I used to use and it can't read any files on there either.
The phone DOES see the card and cant report free space, it just can't do anything with it since the last update.
What can I do?
Thanks,
David

After I formatted the card I can copy files via the PC & cable, but they don't show up when viewing from the phone.
If I use an app like Astro File manager (which did show the files correctly, prior to the 4.3 update), it shows the word "empty" for truly empty folders but it just shows a blank empty folder for folders that have a file that I copied in via the PC & cable.
If I try to make a folder in Astro, it looks like I did, but it doesn't show in Astro.
If I look from my PC, it shows the folder that I created on the phone via Astro.
Once again, everything was working great up until the pushed 4.3 update.
The Old card does show up fine on other phones.
I haven't tried the 64gb card on another phone yet, but the card isn't the issue.
As I copy over files to the card via the PC and cable, the phone does reflect the data used/free space correctly.
I see a similar issue someone is having on an S4, but the thread is locked:
https://community.verizonwireless.com/message/1016871
Still wondering what I can do. Can I downgrade my S3 OS? to 4.1/4.2?

Wired computers unable to see printer on Airport Express...help?

Hi all,
I recently set up an Airport Extreme on our office network to offer wireless network access piggybacked on our wired router. I then purchased an Airport Express which I was planning on using as a wireless print server for our Canon i9900 for all office computers connecting wired or wirelessly, which would interface with the network via the Airport Extreme Base Station.
I have configured the Express as an extension of the existing Airport network, and attached the printer to it via USB. All the computers in the office which have airport cards onboard can see and print from the printer, which is great. The problem is that all of the computers connecting to the network via wires are unable to see the printer (this is under both 10.3.x and 10.4.x, all airport software completely updated.) The Extreme base station shows up for all office computers in their Airport Admin Utility, AND if the printer is connected directly to the Extreme Base Station via USB, all computers can see the printer over Bonjour/Rendevous.
Anybody have ideas as to how I can get my wired machines to see the printer on the Airport Express?
Thanks!!

Applications > Utilities > Airport Admin Utility
Scan and Select your Airport
Click Configure
On the Airport Tab
Base Station Options...
Check Enable Remote Printer Access
iFelix

Why i am unable to see my thread in MY questions list

Hi Folks,
HR -Hide additional field for rest of subtypes . open it for 1 subtype ?
Could u kindly let me know why i am unable to see this (MY) thread in my questonare(Your questions) list??
Regards
Sas

>
Julius Bussche wrote:
> Please do the needfull. <= given the frequency, I think this is a perfectly acceptable expression in India, no?
Ya thats true....:-)
I have often noticed in the ABAP forums that people with very good intentions, break the rules because they did not know about them, but also because they perhaps could not imagine them given the previous examples.
Ya innocence is acceptable but not the lazyness .....and Its also not possible to tell each & every new commer about the rules & regulation keep on saying its not possible...
From our side is also there is some mistake to make them aware of this professional forum .
First i want to point No special tutorial is available when some is registering with the sdn..No one is intrested to study pages of pages rules and regulations until or unless they experience..There should be a manditory tutorial if possibel video(More effective or other wise Power point presentation for some time..add the contents with examples) which should be taken for awhile like what's this forum intensions and how can u search a answer .....and what happens if we post irrelevant subjects , Phrases..After doing all this if some one does post the wrong one then definelty there is reason to get him punished
Of course, I very firmly believe that "the rules" are a minimum baseline rules - but I think often there are easily misunderstood expected behavior in the prefessional forums .
> What is your opinion to change this expected behavior to a minimum baseline (otherwise deleted)?
My opinon is delete is Final option Julius ..
Before this rules..every one is in the gaming of points & prizes..(By copy post , etc)
Now my opinion is that past GUESTS no use of discussing them....instead of deleting them Completely ..Make a option of ban them for a month or for 10 days for sdn Mark them red color ....
Just like referee in Football...Show some yellow card..Last option is Red card..:-)))
> I think we have made good progress in the forums, and nothing is perfect (thank goodness but it is nice to have usable and knowledgable forums only, and not spam.
>
> What do you think SaS?
> Cheers,
> Julius
Ya pretty GOOD...u agree or not The max credit to ur team Especially after u r entrance...
Regards
Sas
Ps:Thankx amit the one i really confuse every time....Gate Way of india & india gate..
actually both are Familiar for me.i visit them oftenly ..thats ..ok..Good that u recognize the people belongs to whihc country by smell....

Severely problem with SUN HBA card SG-XPCI2FC-QF4 installation

Hello:
I'm facing a big problem when installation SUN HBA card,the machine can't recognise the HBA card when poweron with HBA installed,
my system is:
Server: SUN V890, Solaris 10
HBA: SG-XPCI2FC-QF4
I changed another HBA card and I/O solt,the problem again,
errors following:
This is the only error i got ,please help out,thanks.
/var/adm/messages:
Nov 9 01:21:51 N2000Primary genunix: [ID 936769 kern.info] mc-us35 is /memory-controller@5,400000
Nov 9 01:21:51 N2000Primary rootnex: [ID 349649 kern.info] mc-us36 at root: SAFARI 0x6 0x400000 ...
Nov 9 01:21:51 N2000Primary genunix: [ID 936769 kern.info] mc-us36 is /memory-controller@6,400000
Nov 9 01:21:51 N2000Primary rootnex: [ID 349649 kern.info] mc-us37 at root: SAFARI 0x7 0x400000 ...
Nov 9 01:21:51 N2000Primary genunix: [ID 936769 kern.info] mc-us37 is /memory-controller@7,400000
*Nov 9 01:21:51 N2000Primary pcicfg: [ID 756804 kern.warning] WARNING: failed to allocate 256 bytes for dev fibre-channel BASE register [0x10]*_
Nov 9 01:21:52 N2000Primary rootnex: [ID 349649 kern.info] pcisch3 at root: SAFARI 0x9 0x600000
Nov 9 01:21:52 N2000Primary genunix: [ID 936769 kern.info] pcisch3 is /pci@9,600000
Nov 9 01:21:52 N2000Primary pseudo: [ID 129642 kern.info] pseudo-device: dld0
Nov 9 01:21:52 N2000Primary genunix: [ID 936769 kern.info] dld0 is /pseudo/dld@0
Nov 9 01:21:52 N2000Primary ebus: [ID 521012 kern.info] su1 at ebus0: offset 1,3083f8
Nov 9 01:21:52 N2000Primary genunix: [ID 936769 kern.info] su1 is /pci@9,700000/ebus@1/rsc-console@1,3083f8
Nov 9 01:21:53 N2000Primary pcisch: [ID 370704 kern.info] PCI-device: usb@1,3, ohci0
Nov 9 01:21:53 N2000Primary genunix: [ID 936769 kern.info] ohci0 is /pci@9,700000/usb@1,3
Nov 9 01:21:53 N2000Primary unix: [ID 950921 kern.info] cpu7: UltraSPARC-IV (portid 7 impl 0x18 ver 0x31 clock 1350 MHz)
Nov 9 01:21:53 N2000Primary unix: [ID 950921 kern.info] cpu0: UltraSPARC-IV (portid 0 impl 0x18 ver 0

I see this reply is a little late, but just came upon it.
http://wikis.sun.com/display/PlatformIoSupport/Summit4Gb2PortFcQlogic
As you can see in the link above the SG-XPCI2FC-QF4 is not supported in the V890
JK

Macbook pro does not see sd card

I've repeatedly inserted an SD card into my MacBook Pro but am unable to see it.
I'm new to Mac product and the card was formatted in a Windows 7 system. It has documents on it which I'd like to edit.
I could understand not being able to access it, but, the Macbook Pro gives absolutely no indication the SD card was inserted into the slot.
I'm sure I'm doing something wrong.
Suggestions?

I had the same problem. I tried everything that everyone's suggested, but no results. Then I sprayed a can of air/duster into the slot. Voila! It works!

RAC Diagram: Where does HBA card fit in?

Version : 11g
I know that all nodes in a RAC configuration have an HBA card and that HBA is somehow connected to the Shared storage. In the following link, we can see that, through NIC meant for public IP, nodes connect to Shared storage.
http://www.akadia.com/services/ora_rac.html
So, where does HBA fit in the whole RAC set up?

GarryB wrote:
So, where does HBA fit in the whole RAC set up?At physical h/w and driver level.
For the public RAC network you use what? A network card (aka NIC) and a network driver.
An HBA is like a NIC. But instead of wiring into a network switch, it wires via fibre into a storage array switch (where the switch connects to a SAN). It also needs a driver.
Typically HBAs have dual fibre channel ports. This means that the kernel, via the driver, will see the very same storage device (aka LUN), twice. Once via the one port and then again via the second port.
A LUN will however have a unique identifier (called a <i>WWID</i>). A driver (typically Multipath on Linux, or Powerpath when using EMC) is used to create a logical device that Oracle CRS and ASM can use. It uses the WWIDs to determine the unique device (LUN) and then creates a single logical devices that "sits on top" of the physical devices that points to the very same LUN on the storage server.
So instead of the application layer having to deal with the complexities of mulltiple I/O paths to a LUN, this is done by the driver. The application layer simply uses the logical multipath device and the multipath driver does the rest.
So a HBA is pretty low down in RAC architecture - and RAC itself does not deal directly with it. Just like it does not deal directly with a NIC and its settings.
PS. As already mentioned, the URL you referred to uses IP as a storage protocol and thus a NIC instead of a HBA. Questionable whether this is a good idea as a HBA provides dual 2Gb pipes - and the typical NIC used will be shared IP running at best at 1Gb, using a high latency protocol like TCP. A better option than HBAs are using HCAs and Infiniband instead. This runs dual ports at 40Gb (each) using the low latency SRP storage protocol.

HT1918 When I update my credit card information it says unable to many credit cards being used

I been trying to update my credit card information but it says unable to many credit cards being used

iTunes Store: My credit card's security code or zip code does not match my bank's records - http://support.apple.com/kb/TS1646 see also tips in https://discussions.apple.com/thread/4245338
Long thread on security code error with some things that worked for some people - https://discussions.apple.com/thread/2045791
when i enter my security code for my credit card it says its invalid - https://discussions.apple.com/thread/3798384

Unable to see contacts since 7.0.6, unable to see contacts since 7.0.6

since I updated to 7.0.6 I am unable to see the contacts in my phone. I know they are there because if I click in a blank spav=ce, the whole card then appears; but I see only blank spacec in list view

Within Contacts, tap Groups at top left. Make sure all contact groups are checked to show, then tap "Done" at top right.

SUP2/MSFC2 Unable to read flash card

Tring to start the procedure to upgrade from hybrid to native mode.
Running hybrid catos/ios on sup2/msfc2...
In catos unable to see card from
dir slot0:
Unable to open slot etc....
Firmware of sup card is 7.1 and size of flash card is 64MB..
Any ideas

Do you have any files currently stored in the flash card ?
You may also try on an alternate slot to see if the problem gets fixed
Its possible that the file system in the card is not compatible with CATOS FS. You may have to format the card in the switch.
http://www.cisco.com/en/US/products/hw/switches/ps708/products_command_reference_chapter09186a00802dcd5c.html#wp1025012

Solaris 9 HBA card detection

Hi,
Every time i install a fresh copy of Solaris 9 OS, i make sure i install the HBA drivers and generate the sd.conf file . But even then, i am not able to see the HBA cards detected. Kindly help.

I think you could be in luck with the SG-XPCI1FC-QL2 as it is on the handbook for the E250.
However, you have lucked out with the SG-XPCI1FC-QF4 as there is no chance you will make one of those work in a E250. These cards require the new I/O assemblies for the large Sun Fires.
I think the SG-XPCI1FC-QL2 is rebadged Qlogic QLA2300 (I am not certain of this but I will give it a go in the future) . Go to the Qlogic web site:
http://support.qlogic.com/support/os_detail.asp?productid=122&osid=22
You will find the drivers there.
Good luck.
Stephen

HP HBA Card compatibility-SunStoredge9990/Tagmastore 9990,SunStoragetek6540

Is there any site or way to check the compatibility of this HBA Card...
"HP StorageWorks FC1143 4Gb PCI-X 2.0 HBA AB429A" with Sun Storedge 9990 / Hitachi Tagmastore 9990, Sun StorageTek 6540.

I think the HCL is more for letting you know what hardware - in this case, the HBA - the Solaris OS will support. So, I'm thinking that most fibre-channel cards are built to an industry standard for fibre-channel and that if the OS has a driver for that particular card, it should meet your needs when you connect your Solaris server via the HBA to your 9990/6540. There may be an issue if link speed on each end doesn't match and HBA can't strp down to 9990/6540's link speed.
One way to find out for sure (if you already paid for the HP HBA) -- connect it up and see if it works.

7210 Unable to see HBA card

Similar Messages

Maybe you are looking for