7290 MEP data invalid

Had this randomly appear on my screen, have tryed another sim in the handset n still the same problem. Have been using this handset for a year now n never had this problem before.

According to this KB article it's either a bad SIM card, or the device software needs to be reloaded: http://www.blackberry.com/btsc/KB04114
If you take it into you'r carrier's store then they can try another SIM card to determine if your card was bad
To reload the OS on your device just follow these steps:
First download and install the Desktop Manager from here (4.6 without Media Manager is recommended): https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Next download and install the handheld software from here: http://na.blackberry.com/eng/support/downloads/download_sites.jsp
Afterwards try reloading the OS by connecting the device to your computer, open the Desktop Manager, then go into the Application Loader. This will open a wizard that steps you through reloading the OS onto your device. More detailed stsps can be found here:
http://www.blackberry.com/btsc/KB03485
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Similar Messages

Why do I get "Error 1 occured at Config Data Registry.vi(get data) invalid object 0" while starting my application?

Why do I get "Error 1 occured at Config Data Registry.vi(get data) invalid object 0" when starting my application created in LabVIEW 7.1? I am starting the application in a PXI rack running Windows XP. I have an executable written in LabVIEW 7.0 that runs without this error. After clicking the Continue button in the error, the application seems to continue happily.
Is there something I need to include when I make the executable?
I would like to understand and eliminate this start up error.
Thanks in advance.
BobNorth

Hi Bob,
I looked through the program and I figured out where the error is coming from, and potentially what is causing it. In a lot of the cases of the program you are searching a 1-D array for the name of the case, and if you don't find it then it skips the function and gives "Error 1 occurred at Config Data Registry.vi(CASENAME) invalid object 0". I attached a screenshot that shows what I mean. The Search 1-D Array.vi is returning a -1 which means it didn't find the case. The reason I believe this is happening is because the shift register for that array is not initialized. While the other cases "reset" and "register" interact with the array shift registers and most likely create the array you need, if the program defaults to the "get data" case then it will try to run that before registering and won't have an array to search. This would also explain why it only has this problem at first and seems to run just fine after that. To fix this you should either make an initial array and wire it into the shift register or make the "reset" case the default as opposed to the "get data" case.
Regards,
Peter W.
Attachments:
Config Data Registry.png ‏55 KB

ERROR: Error in getting session data: Invalid or Expired Session

Hi,
We are using ssrs 2008 r2 and have a report which has links that allow the user to drill down.
When the link is clicked the same report is run but shows more detail. This works fine but we are now getting the error below for a user.
I have increased the time out for the report to 600 seconds.
Error in getting session data: Invalid or Expired Session: fnxgxhjuveugvd552qfyv3fw
session!ReportServer_0-6!4b0!03/18/2015-10:51:29:: i INFO: LoadSnapshot: Item with session: fnxgxhjuveugvd552qfyv3fw, reportPath: , userName: doman/user not found in the database
Any ideas how this can be resolved?

Hi Nasa1999,
Based on your error message, If the all the users will sometimes got the same issue, it can be caused by the timeout issue. It happens a lot when rendering big report, and it exceeds the default Session Timeout. You can execute script
to increase the Session Timeout time. Please refer to following blog:
Session Timeout during execution. Also increase the value of <Query Timeout> in rsreportserver.config file. This file locate at XX:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportServer
Please also check to set the <legacyImpersonationPolicy> back to true(https://support.microsoft.com/en-us/kb/972328).
Locate the Aspnet.config file in the following folder:
%windir%\Microsoft.NET\Framework64\v2.0.50727
If Microsoft Visual Studio is installed on the computer that is running SQL Server 2005, double-click
Aspnet.config. If Visual Studio is not installed on the computer, follow these steps:
        a. Right-click Aspnet.config, point to
Open with, and then click Choose program.
        b. In the Programs list, click
Notepad, and then click OK.
Locate the following tag in the <runtime> section of the code.
        <legacyImpersonationPolicy enabled="false"/>
Change the tag to:
        <legacyImpersonationPolicy enabled="true"/>
Save the Aspnet.config file.
Reset IIS.
Try your report again.
Similar Thread for your reference:
Using SharePoint Report Viewer
Web Part: Error in getting session data: Invalid or Expired Session: xxxxxxxxxxx
If only the one user or several users will got the issue, the issue can be caused by the permission setting, please reference to below blog:
http://answers.flyppdevportal.com/categories/sqlserver/sqlreportingservices.aspx?ID=3506231b-9f4d-4f5a-884d-157137c56336
http://blog.goobol.com/the-permissions-granted-to-user-domainusername-are-insufficient-for-performing-this-operation/
If your problem still exists, please try to provide more details information as below:
Did you reporting service installed in native mode or sharepoint mode, If in native mode, please try to provide more error message from the log file:
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Property Data Invalid

Having a problem when I try to export from Premiere Pro (CS4). The main files I am importing are .flv (Sorenson H.263 - btw anyone know why it won't find media data for H.264 .flv?), 29,970, 4:3, 640 x 480, etc. I have tried modifying these file specs and generating new .flvs - codec, frame rate, size, aspect ratio, audio codec & sample rate, etc. - to get a better match with the sequence setting presets but nothing seems to be working. I always get "Property Data Invalid" and then it crashes.
My computer specs:
Custom Intel Core-Duo CPU
6400 @ 2.13 GHz, 1.99 GB RAM
Windows XP SP3
Hard Drive - 1x 195GB NTFS w/ 106GB free
ATI Radeon Graphics Processor
RAID controllers: Intel(R) 82801 GR/GH SATA RAID Controller, and Silicon Image SiI 3114 SoftRaid 5 Controller
HP DVD Writer 840y
Virtual memory 2044 MB for all drives
Let me know if I've missed any pertinent info. I am new to Adobe CS4 but so far it seems to be a whole lot of hassle. Can anyone offer any speculative insights as to what could be going on?
Thanks

In a 3x HDD setup, the first disc is used for the OS, programs, and possibly the Page File (Windows Virtual Memory). The other two HDD's are used, one for media and one for the Project and Scratch Disks.
Video editing is highly I/O intensive. The ability of the computer to access multiple HDD's for multiple tasks is very important to freeing things up. If everything is on one physical HDD, then the computer keeps waiting on the reads/writes, that cannot come at the same time. Things get even worse, should one have any partitions, because the OS thinks that it's dealing with multiple physical HDD's, but is only dealing with logical HDD's, and it cannot understand why it's taking so long.
This is heavily simplified, but it all about data access.
Good luck,
Hunt

Data invalid error when installing C6388 printer on ethernet lan

Hello Sir
Hello Sir
I am trying to install HP Photosmart C6388 all in one, in my office on the local area network with no gateway but manually configured IP. While installing the software for lan the software detects the printer with the IP but after completing 53% of the installation there comes an error message saying "cannot install the hardware" "image" "data invalid". I have always disabled my antivirus firewall also but anyhow the problem is still there, Even I have tried to install on 3-4 PC with Windows XP SP-2 the same OS I use the error comes. I have also downloaded the update driver software from your website. Even installing the printer with a gateway enabled network the error comes & says retry or cancel..plz. help....

OK, as long as DHCP is active.
However, after reading this again, this may be a Windows problem. I noticed that you are at SP2 with XP. You really should be at SP3. Do WIndows Updates over and over until there are no more.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

5800 XM npc data invalid

my nokia 5800 v.50.00.05 has a problem it take restart autometically in every 2 min ... wlan option does not work.. i found npc data invalid . pls help me to resolve this prob

I need to know how did u updated phone to v50.x.x.x firmware?
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

Microsoft Project Send Data Error As of date invalid

Hi,
When i try to receive data from oracle into Microsoft project and then i do same changes and then when i send to back to oracle is shows error."The As of Date is Invalid"
please any tell me how can i correct this error.
thanks,
tariq

Hi,
You may check whether the "As of date" you entered in the progress information if valid and check whether it is within the project period.
Regards,
Bvt

PCG Seed Data Invalid characters displayed in FRC

Hi, I'm not certain this is the correct forum or not.
Customer has PCG 7.3.2 on 11i, using FRC.
Many menus and concurrent program names & messages (all seed data) that use accents, are displaying garbled characters.
eg: GRC Controls : RÃ¨gles associÃ©es aux Ã©crans
when viewed through TOAD, Data looks the same, yet non PCG seed data with same words have the correct french accented characters.
NLS character set is WE8ISO8859P1, not UTF8. (which is standard in 11i FRC installs).
As per the PCG install guide, I have tried using both files (for UTF8 & WE8ISO8859P1) in $ORACLE_HOME/forms60/admin/resource/FRC, but the results do not change.
I think this may have had something to do with environment setting used during the installation process.
I would like to experiment with this, but cannot find the scripts/files that actually seed the FRC data for seeded menus and concurrent programs.
Can anybody guide to to these ? or provide an alternative or known (I can't find one) solutiuon ?

Hi Srini,
When customer is viewing output from the SRS window, then it contains invalid characters because it is in UTF-8 character set. Customer is on Oracle OnDemand so they cannot take the output generated on the server.Every time they have to raise a request to Oracle for the output file. So the concern here is, why don't the output from SRS window show output with valid characters ?
The reason could be conversion of ISO format to UTF-8. How could this be resolved ? Does SRS window output cannot generate in ISO format ?
A quick reply will be appreciated as customer is chasing for an update.
Thanks,
Saket
Edited by: 868054 on Aug 7, 2012 11:08 PM

InfoPath form failed to use NTLM authentication to load data - Invalid authorization specification

I knew this might be discussed in other places but I've searched over the web but still do not have a clue how to fix my issue.
I am using SharePoint 2010 and I created an InfoPath form that reads data from a database using data connection file (udcx). As explained in many other articles, I've set up my secure store correctly and created an application called 'InvestmentOperationAccess'
with a windows service account and then export the udcx file and enabled the <udc:Authentication> tag as flowing:
<udc:Authentication><udc:SSO AppId='InvestmentOperationAccess' CredentialType='NTLM' /></udc:Authentication>
Then I upload this file back to the data connection library and approved. But when I try to load the form in web broswer, I received the following error:
05/15/2013 14:40:15.09 w3wp.exe (0x0C94) 0x263C InfoPath Forms Services Runtime - Data Connections eq8l Warning The following query failed: EntityMatrixView (User:
xxxxx\xxx, Form Name: Template, IP: , Connection Target: , Request:xxxxxxxxx(URL of the list) Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2013-05-14T23:32:41:604Z
Type: DataAdapterException, Exception Message: The form cannot connect to the data source. Invalid authorization specification
In the meantime, I used SQL profile try to capture the credential it is used by nothing was passed to that SQL box.
Then I created another application in my secure store with SQL login account and modify my udcx file to be
<udc:Authentication><udc:SSO AppId='InvestmentOperationSQLAccess' CredentialType='SQL' /></udc:Authentication>
This time when I load the form, everything worked and in SQL profile I can see it is reading data using the SQL account I specified in secure store.
In a nutshell, it is working with SQL authentication type but not NTLM, anyone could help me with that?

Same problem here. Anyone has a solution for that?
It seems one cannot use windows accounts with secure store and database access for info path data sources ...

11g Client installation errror - Unable to construct admin data&Invalid UTF

I am trying to install Oracle 11g Client on Windows 7 (version is Oracle Database 11g Release 2 Client (11.2.0.1.0) for Microsoft Windows (32-bit)). I already have installed Oracle 10g Client and it is working without problem. I read few articles that say it can be used simultaneously on single machine.
I get following error:
"ERROR!! Unable to construct admin data segment. java.io.UTFDataFormatException:Invalid UTF8 encoding."
I have full admin rights on machine, Windows is updated and latest Java is installed. Searched all over the net but can't find what could be the problem.
Thank you in advance.

This may be helpfull:
http://download.oracle.com/javase/1.4.2/docs/api/java/lang/class-use/Exception.html
its look like you have a problem with java
Edited by: Fran on 12-jul-2011 5:02

E-mail address format in cutomer master data invalid - how to store it ?

Hi,
we try to enter email-addresses in the form name.@domain. SAP checks according to RFC that the local part "name." is invalid because it contains a traling (or leading) dot.
So we get an error and cannot create the customer master using BAPI . But the customer wants us to do anyway.
Can we change (and how-to) the error message to Info message or is there any BADI or userexit for this?
TIA,
Clemens

Sorry,
this is no use.
An email address is built as <local_part>@<domain>
It is a rule that the <local part> of an email address must not start or end with a dot.
This rule is checked by a function in the address management of the SAP business partner.
That is what I know.
My question remains: How can we put those fake addresses into customer master data without the error.
We all know that those addresses are invalid. But the customer wants to keep them just as they have been sent to us.
Thanks
Regards,
Clemens
May question remains: How can

Why do i get "error 1 occured at Config Data Registry.vi(get data) invalid object 0" while running my application

OS Ver : WinNT 4.0
Labview Ver : 6.1

Do you have the run time engine installed? If so, you might consider reinstalling it.
Can you get any LV executable to run? Attached is an executable that runs on my XP box with LV 6.1.
Attachments:
LV_61_build_into_an.exe ‏55 KB

Multimedia Audio Controller issues "The data is Invalid"

can someone please explain to me what that meens and how to resolve the issue?
Uninstalling and reinstalling has done nothing, roll back drivers has done nothing and also defeats the purpose of updating drivers. This issue began when i was prompted to update drivers, so i did and BANG no more sound.
All files on the DVD install ACCEPT the WDM drivers which im guessing are pretty important. Everytime they try and install i get a Data invalid message and the typical yellow exclamation mark in the device manager over 2 options. High definition audio and Multimedia Audio Controller.
This has hppened to me anytime ive ever tried to update drivers, only way i fixed it was to reinstall OS, really not keen to do that anymore, just to install a sound driver.
Also, they really should not be telling us to update sound drivers, because they never ever update properly,without hassle.
Using XtremeMusic X-Fi SB04606
Windows XP
ASUS P5B Deluxe Wi-FI
Intel core 2 duo 2.67Ghz
3Gb's ram
P.s The sound card was workin before i tried to update teh drivers from the Creative Support Website. I followed instructions there and my sound card is no longer working.

Hi,
You might want to attempt the following registry fix. It is strongly recommended to back up the current registry settings and create a restore point before proceeding.
1. Select Start - Run and type regedit to open the Registry Editor.
2. Browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ENUM\P CI and you see a number of keys in the form VEN_xxxx, where xxxx are strings such as VEN_1102&DEV_0004&SUBSYS_00511102&REV_03.
3. Under each of these folders you will find another folder with a long numerical name. Open each folder and look for the DeviceDesc which matches the hardware you want to install.
4. Right Click on the VEN_xxxx for that device and select Permissions and then tick Allow for Full Control.
5. Close Regedit and then continue with the installation of your device.
You might also want to download the file PNPREG.EXE from www.microsoft.com, and run the pnpreg tool from a command prompt. After downloading the file, select Start - Run and type COMMAND. At the Command prompt, type Pnpreg -l.

Problem date format

Hi Guru's
I have a problem with a field coming from a file upload in my internal table wich should be insert in a system table in date format.
When i do my test to check if the field has a correct date format I always receive the error: "Valid_to_date is invalid".
the field in my csv file has this format 02.03.2009.
I've written this code :
TYPES: BEGIN OF t_segm2,
   kokrs    TYPE kokrs,
    prctr   TYPE prctr,
    datbi   TYPE datbi,
    datab   TYPE datab,
END OF t_segm2.
DATA:
          wa_cepc_segm TYPE t_segm2,
           i_cepc_segm TYPE STANDARD TABLE OF t_segm2,
          it_datatab TYPE STANDARD TABLE OF string,
          wa_datatab TYPE string,
LOOP AT it_datatab INTO wa_datatab.
    SPLIT wa_datatab at ';' into
                          wa_cepc_segm-kokrs
                          wa_cepc_segm-prctr
                          wa_cepc_segm-datbi
                          wa_cepc_segm-datab.
    CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
      EXPORTING
        date                      = wa_cepc_segm-datbi
      EXCEPTIONS
        plausibility_check_failed = 1
        OTHERS                    = 2.
    IF sy-subrc <> 0.
      WRITE:/ 'Valid To Date invalid'.
    ENDIF.
    append wa_cepc_segm to i_cepc_segm.
    CLEAR wa_cepc_segm.
endloop.
Anyone can help me please?
Regards,
Mohamed.

Everything seems fine with the code. I tried it myself and I got strange behaviour.
I used this code:
data: datbi TYPE datbi.
fdate1 = '02.03.2009'.
concatenate fdate1+6(4) fdate1+3(2) fdate1(2) into datbi.
CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
      EXPORTING
        date                      = datbi
      EXCEPTIONS
        plausibility_check_failed = 1
        OTHERS                    = 2.
    if sy-subrc ne 0.
      write 'Wrong date'.
"    else.
"      write 'Date ok'.
    endif.
When I leave ELSE block commented, the FM returns sy-subrc = 0 and doesn't display 'Wrong date' message. So this works as we want. But when I debug it, I can clearly see that processing goes inside IF block and tries to write the message out (even thought the condition is not fullfilled). But anyhow the message doens't appear on the screen. Strange.
Now when I uncomment the ELSE block, the processing seems to work fine. Don't know why it is happening but if we leave entire IF,ELSE it works fine. So try this solution. Everything else works fine.
Regards
Marcin
Right now I tried to see if this IF block really changes some data object using:
data var type i.
call fm....
if sy-subrc ne 0.
   var = 1.
endif.
write var.
And I could see that, thought processing is passed inside the block it doesn't change VAR contents. So it stays 0. But just right after it I run the program again to show it to my collegue and the processsing didn't go inside anymore. It must be something with debugger then. My collegue says once he spent some time investigating the same problem and finally he gave up. What the debugger was showing was different from what it was in fact calculating. Fortunatelly the calculation here doesn't change, just debugger is trying to cheat us showing what he is really NOT doing;)
Edited by: Marcin Pciak on May 8, 2009 9:31 AM

[SOLVED] 'date' accepts CET but not CEST

I can use this to find out what 0.00h CET is in my time zone:
date -d '0:00 CET'
Now I want to find out what 0.00 CEST would be in my time zone, but this doesn't work:
date -d '0:00 CEST'
date: invalid date ‘0:00 CEST’
Edit: Solution is to use MEST or MESZ instead of CEST.
Last edited by mir91 (2015-01-11 23:57:22)

Thanks, CEDT doesn't work but MEST seems to.
MESZ apparently works too.
Last edited by mir91 (2015-01-11 23:58:30)

7290 MEP data invalid

Similar Messages

Maybe you are looking for