7300GT performance on Mac OSX

I know this is a topic that has been raised in other discussion forums but I thought I'd raise it here.
I've been using my iMac for gaming for a while now and have noticed that the difference in graphics performance varies massively between OS X and a Bootcamp installation of Windows XP. Were the difference only slight I would attribute it to OS differences. It is not.
The performance of my NVidia 7300 GT on Windows XP allowed me to plat many of Valve's Source Engine games and many other great games, many of which one would think were not terribly demanding on a machine with the capabilities of the iMac 6.1, for example Torchlight or Minecraft. Since removing partition and going for a full Mac OS X drive I've realised that the iMac, or at least my particular model, are not designed to handle 3D graphics of any real complexity despite the machine being marketed as such.
To illustrate this I'll use the game "Torchlight" as an example. Under windows my particular iMac can run the game at 1920 x 1200 resolution (if I remember correctly.) I can max out its graphical settings and still run the game at a very high frame rate with no slowdown. Under Mac OS X under the same hardware I get <10 fps with screen resolution and all graphics settings at the lowest possible setting.
I hold out hope that OS X 10.7 will make some changes to the drivers or other factors that choke my poor iMac's gaming potential. Does anyone know if this is the case? Does Apple have any plans to improve the 3D capabilities of its older machines (at least bring them to parity with their Windows equivalent?) Should I just give up on my current machine ever running games well in OS X and start saving for a newer model or consider reinstalling Windows?

+I hold out hope that OS X 10.7 will make some changes to the drivers or other factors that choke my poor iMac's gaming potential. Does anyone know if this is the case? Does Apple have any plans to improve the 3D capabilities of its older machines (at least bring them to parity with their Windows equivalent?)+
Sorry, but according to the ToU (on the right of every page), we are not allowed to speculate and since these are all user-to-user forums, we have no idea what, if anything, Apple is planning.You will have to wait until there is an announcement by Apple.

Similar Messages

  • Mac OSX 10.5.7 and GMAx3100: NO UPDATES!! Why Apple don't fix this problem?

    I update yesterday to mac osx 10.5.7 my macbook with gma x3100. Exposè in VERY SLOW since 10.5.0 (on tiger will work perfectly), opengl performance are very poor respect gma950 and it is incredible!!!
    why apple ignore us? why gmax3100 users can't use exposè because is very very slow and not fluid?
    Apple fix this problem, it is RIDICOLOUS.

    Man... gmax3100 have a POOR opengl performance under Mac Osx Leopard in 2d. It is NOT my problem but it is a known problem. Try to run some benchmark with gma950 and gma x3100.
    Macbook c2d 2.2 opengl performance x3100: 23.28
    MacMini cd 1.6 opengl performance gma950: 184.76
    it is a know problem:
    http://lists.apple.com/archives/mac-opengl/2008/Jan/msg00025.html
    http://forums.macrumors.com/showthread.php?t=446938
    http://forums.macrumors.com/showthread.php?t=448571
    http://forums.macrumors.com/showthread.php?t=403685
    ecc.
    exposè make 40fps and it is NOT fluid like a nvidia or ati card. Exposè is a simple animation, under arch linux and geforce3 (2001) is more more fluid respect leopard... and respect to tiger.
    with this hack:
    sudo defaults write /Library/Preferences/com.apple.windowserver Compositor -dict deferredUpdates 0
    exposè is much MORE fluid so it is a driver problem (because with tiger there's no problem!!)
    I have NO problem with my macbook.

  • Mac OSX 10.5.7 Leopard can not detect webcam

    Hello Support,
    I am using Mac OSX 10.5.7 Leopard in Safari and FireFox however Flash Player v 9 and 10 does not detect my isight webcam (firewire). I can not even change my settings to choose a webcam because the image that I get when I go to the settings is just a screenshot but not interactive. I have attached the picture.
    Does Flash player work in Mac OSX 10.5.7 Leopard Safari and FireFox? I get as far as the allow or deny button, then I get a error message saying that my cam is not detected.
    Can you please advise.
    Thanks in advance

    Man... gmax3100 have a POOR opengl performance under Mac Osx Leopard in 2d. It is NOT my problem but it is a known problem. Try to run some benchmark with gma950 and gma x3100.
    Macbook c2d 2.2 opengl performance x3100: 23.28
    MacMini cd 1.6 opengl performance gma950: 184.76
    it is a know problem:
    http://lists.apple.com/archives/mac-opengl/2008/Jan/msg00025.html
    http://forums.macrumors.com/showthread.php?t=446938
    http://forums.macrumors.com/showthread.php?t=448571
    http://forums.macrumors.com/showthread.php?t=403685
    ecc.
    exposè make 40fps and it is NOT fluid like a nvidia or ati card. Exposè is a simple animation, under arch linux and geforce3 (2001) is more more fluid respect leopard... and respect to tiger.
    with this hack:
    sudo defaults write /Library/Preferences/com.apple.windowserver Compositor -dict deferredUpdates 0
    exposè is much MORE fluid so it is a driver problem (because with tiger there's no problem!!)
    I have NO problem with my macbook.

  • Why can't I open a GarageBand recording on my iPhone in GarageBand on Mac OSX?

    I recorded an acoustic performance of my vocal quart last night on an iPhone running GarageBand 2.0.1 on iOS 7.1.2.  But I can't open it in GarageBand 11 (6.0.5) on Mac OSX 10.9.5.  What gives?
    Not only will it not open (and the software on my Mac platform is way more recent than on my iPhone, so you'd think it would be upward compatible), but when I try to open this iOS-created file on the Mac, it asks me where I want to save it ... it's already saved, I'm just trying to open it.
    I've looked at the reviews for the latest GarageBand, which it tells me I need to upgrade to, and they are terrible!  Many report that they wish they hadn't upgraded and that they could get back to an older version of GarageBand on their Mac.
    Does this mean I'm stuck and the two GarageBand platforms are not compatible and that I won't be able to open this file?  ... other thanes an mp3 in iTunes ...
    Thanks for any insights you can give me.

    BigMacUser wrote:
    I recorded an acoustic performance of my vocal quart last night on an iPhone running GarageBand 2.0.1 on iOS 7.1.2.  But I can't open it in GarageBand 11 (6.0.5) on Mac OSX 10.9.5. 
    [...] when I try to open this iOS-created file on the Mac, it asks me where I want to save it
    it sounds like it's opening fine, but you're just not letting it finish.
    it's asking you to save a version of the song for the mac; if it saved over the original file, it could no longer be opened on the iOS device, if you needed to alter something later

  • Mac OSX Lion 10.7.4 and Parallels (memory issues)

    I bought a 2011 Macbook Pro i7 2.2ghz with 4gb of ram, 5400 rpm 500gb hard drive.  Base 15 inch model pretty much. 
    I actually purchased it for a few reasons.  1) I had a 1200 dollar credit at a local electronics store and 2) I figured the battery life would be decent and 3) I was interested in playing around with Mac OSX a bit more.
    Long story short I still need to use windows for various applications and for work.  So I purchased Parallels since it seemed to have pretty good reviews and installed Windows 7 in one and Windows XP in one.  Giving them 2gb for 7 and 1 gb for windows XP.  Now since I knew I wouldn't have enough ram, I upgraded my ram to 8gb and upgraded the hard drive to a 7200 rpm.
    So this is where my problem is, I am unable to run both of them at the same time without Mac running out of memory and swapping like no tomorrow bringing the entire computer to a halt.
    In general Lion seems to be pretty slow, even without any virtual machines running.  I have done a reinstall of the entire OS, repaired permissions etc.
    So at this point I think I have come to the conclusion that the only solution is to again get more memory and go up to 16 gb, which is crazy in my opinion.  I also installed Windows 7 in bootcamp and then installed Vmware workstation and I can run 4 virtuals (1 windows 7, 2xps and a win2k3) before the base OS gets really sluggish, so it isn't the hardware, it is simply the OS.
    Case and point is my other laptop a Lenovo W700ds (for anyone who has seen this thing, it is a beast and has horrible battery life.. one of the reasons I wanted the Mac) runs a core2quad and has 8gb of ram but I usually keep 3 virtuals up without any hit to Windows 7.  But it also only gets 30-45 minutes of battery life, while my Macbook Pro gets about 2-2.5 hours of battery life with the virtuals running however everything runs like crap so I usually have to suspend and only keep 1 at a time open.
    My question being simply, is this normal?  Should better hardware have such poor performance or am I just expecting to much?  At this point my options are to install Windows 7 native (which i'd rather not do, I actually do like some of Lions features) or am I forced to buy even more ram?
    I was also thinking of getting rid of the superdrive and moving my main drive there and then getting a 256gb SSD as the primary.  But it seems to me at this point I am just dumping money into something that should already do what I want.  This would split the hard drive access load though.
    Any suggestions? 
    Thanks

    Honestly I would never run both Win 7 & XP at the same time in a VM. 7 needs at least 4GB to run properly and uses more resources then XP.
    I personally use VMware Fusion and XP. At this time there is no software, that I'm aware of or use, that does not run on XP. So for my Mac Win VM purpose I only run XP with the software in need to use in Windows. This work very well for me. I have 2 CPUs and 3GBs of RAM assigned to XP. Leaving the other 2 CPU cores, 4 HT cores, and 5GBs of RAM for OS X.
    Not sure why you need, or want, to run both versions of Windows at the same time. I don't see the need as stated above.

  • Sharing files between a Windows Vista Business edition and a Mac osx 10.6.6

    Is there reliable information somewhere about how to share files from a Windows Vista business edition pc to a Mac osx 10.6.6?  I have googled instructions and followed the steps and still could not have sharing to happen between the Vista pc and the Mac.  These are the steps I have performed, I have made sure that
    o Both the Vista pc and the Mac have the same user account/password.
    o The firewall from the Vista side allows file and printer sharing in the exceptions.
    o Enabled sharing with a few directories on the Vista pc.
    o Changed the security policy on the Vista pc to "LM and NTLM - use NTLMV2 session security if negotiated".
    o On the Mac System Preferences > Sharing selected File sharing.
    On the Windows Vista pc, if I click the Start menu and then Network, the Mac does not appear.  On the Mac, from the Finder menu if I click Go > Connect to server and request a connection to the IP address of that Vista pc, I get an error, "Connection Failed"  (could not find pc or not available at this time).
    What else do I need?

    That was a great tutorial / walk through.
    In fact, I would say that was far easier than the entrophy route (which is good) as you can see exactly what you are doing rather than relying on an installer which has often failed in the past for me, and then just suddenly worked for no apparent reason!
    Just two things to improve it for other users, and they are really VERY minor... From previous experience, I knew where to find the php.ini.default file, but you don't let people know where to find that, and the links to the MySQL downloads were broken. I guess that is because the file names have changed or because I am coming at it from a different country. I got a message stating: 'That file does not exist on our download mirrors.'
    Thanks for doing that, I really appreciate you (and the likes of David Powers) taking the time to set these tutorials up for others to use.
    Mat

  • 3050A Scanner won't talk to my Mac OSX 10.6.8

    I originally had the issue where the scanner was simply scanning a portion of the page (mentioned and solved in another thread here). However, my problem has now grown....
    I was temporarily able to the scan images correctly by going through the Applications folders and clicking on the Scan 3 icon and directing the scan from this. However, now even this won't work and the scanner doesn't communicate at all with my Mac OSX 10.6.8 - I can't even get it to scan from the control panel on the product. The printer works fine - however I haven't acutally checked the printer again since doing the following:
    I have uninstalled the software and reinstalled. I have checked for updates and it is indicating that I have updated software, yet when I click on HP Utility, I get the following error msg:
    Some components installed on your computer were developed for another version of HP Utility. These components will not be loaded and some functionality related to your device will not be accessible. Please click HP Support item on the toolbar to visit HP Online Support site and download the latest versions of HP software.
    I did this but I keep getting the msg that my software is up to date. So what now?
    I have noticed that there are 2 scan icons in the Applications folder and one of them doesn't register the product at all when clicked. The Scan 3 icon used to work, but now just perpetually tries to open a connection with the printer and never can, when I try to cancel it it then goes into perpetual canceling mode and the only way I can shut it down is to Force Quit.
    Any suggestions on how to remedy this before I throw my new HP 3050A off of the balcony 
    This question was solved.
    View Solution.

    Hi,
    Please follow the steps below to fully remove any software component and reinstall the software:
    First, completely remove the software using the scrubber function:
    **Please be aware that performing the next steps will remove any installed HP Software.
    1. Click on Go menu (Click the desktop, then look at the menu in the bar at the top of the page)
    2. Select Applications
    3. Select the Hewlett-Packard folder
    4. Double-click HP Uninstaller application
    5. Follow the uninstallation till prompted to select a device to uninstall
    6. Press and hold Control + Alt + Cmd keys on the keyboard simultaneously while you click on Uninstall
    7. approve any prompt to uninstall any HP Software.
    Next, repair the disk permissions to avoid any possible issue:
    1. Open the the Applications folder.
    2. Go to the Utilities folder.
    3. Double-click on Disk Utility.
    4. Select the hard drive containing the boot volume.
    5. Go to the First Aid tab and select Repair Disk Permissions.
    Note: This process may take several minutes depending on the Mac and amount of permissions that need to be repaired. The Progress Log will indicate when the proccess has been completed.
    Next, Reset the printing as following:
    *Be aware that resetting the printer system will remove any existing print queue and reset any customized driver settings.
    Click the Apple menu, and then click System Preferences .
    Select Print & Fax.
    Right-click (or Ctrl + click) your product in the Printers list in the left panel, and then click Reset printing system .
    Click OK to confirm the reset.
    Type your user Name and Password .
    Click OK . The printing system resets.
    Now install the latest Full Feature Software below:
    http://ftp.hp.com/pub/softlib/software12/COL37730/al-93167-1/Deskjet-3050A-J611-series_v12.7.0.dmg
    Install any available HP update by clicking the Apple icon and then Software Update.
    Finally, install the patch below to fix the scan cropping issue and be able to update the settings:
    http://ftp.hp.com/pub/softlib/software12/COL41837/mp-101655-1/HP_Scan_for_Mac_OS_X_10.7_Update.dmg
    Please let me know of any further issue,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • IPhone not updating due to lack of iTunes and Mac OSX update

    Hello,
    I have an iPhone 3GS running software version 4.1 and am needing to update it to the next version. When I click on the 'update' button when the phone is connected to my MacBook, a window pops up that says 'This version of iTunes (9.2.1) is the current version'. I realize that iTunes needs to be updated as well, but in order to do that I need a different version of Mac OSX. I have an older MacBook and am currently running Mac OSX 10.4.11
    My question is: is the only way to update my iPhone at this point to purchase the OSX Leopard 10.5? I seem to be caught in a dilemna of not having the most up-to-date software on my computer, but I wish it didn't effect my iPhone performance.
    Any information would be helpful. Thank you!

    You can upgrade the MacBook directly to Snow Leopard for $29.00
    <http://store.apple.com/us/product/MACOS_XSNGL>

  • AE CC 13.0.2 on Mac OSX 10.9.5 - file collecting feature does not work anymore

    hi, I am experiencing issues with the file collecting feature out of AE CC 13.0.2 on Mac OSX 10.9.5. I have the same kind of problems on my MacBook Pro Retina 15'' (2014) with 1TB SSD and 16 GB Ram and on my iMac (mid 2011 3,4 GHz Intel Core i7 16 GB RAM). I open a project without any problem, then try to collect onto an external hard drive. AE gives me error message, it cannot find a certain file (never the same file, I tried many times). I hand collected a current project onto external HD from my MacBook Pro, went to my imac, opened the hand collected Project from external HD (again no issue while opening) then again tried to perform the collect command. again error message notifying me that a certain file is missing. This is the case with different AE projects!! The After Effects collect files command to me is a very important feature that provides backup safety. with this feature not properly working I feel insecure, I need to fix this  asap.

    Oh yes. My bad. It is in face the one-second mark. And it is in every
    project I have tried.
    The assets in the first project that I noticed this happening on (which was
    also the first project I opened after upgrading to OSX 10.10.2) include:
    - Solid background with a color gradient
    - Alpha Track Matte
    - Optical Flare
    - Particular
    - Null object
    But this exact same problem occurs with every project I've tried to export,
    regardless of what's in the project/comp

  • How do you know what version Mac OSX is on ANOTHER drive?

    How do you know what version Mac OSX is on ANOTHER drive without starting that drive
    and seeing the system profiler? In fact, because the drive wont start up, Now I am wondering if it is pre-intel. ? CMD-I doesn't do it. Thanks

    Why mess with this? Well, I got the HDDs and the enclosure from my previous PPC, so I'd like to make use of it all without $pending again.
    I don't see any problems with using the card and drives on your new Mac. Hardware is too pricey to just leave behind if you can't help it. With the new drivers I suspect you'll be able to use your drives, I just don't think you'll be able to boot from them if the interface card requires drivers. They should still be very fast storage devices, and probably reliable due to the ongoing support the vendor has provided.
    I went through the same type of issue when I bought my Dual G4 1.42 Tower (upgraded from a Quadra 840AV ). Several of my devices were SCSI (I was into SCSI Wide/Fast drive arrays at the time for video capture), and I was able to use an Adaptec card for scanning for several years with Jaguar and Panther. I'd spent quite a bit of cash to ensure high quality and performance and didn't want to loose all of the investment. Eventually the SATA hard drives and other USB and Firewire replacements became so cheap and performance improved enough that loosing SCSI with Tiger was not a big deal. I do think I should get about 5 years of hardware compatibility with most products and I keep older Mac's around for dedicated services as long as they aren't a costly maintenance issue.

  • Fireworks CS4 in Mac OSX 10.5.8 nearly unusable

    I am a Digital Media Tutor and have been using Fireworks in our curriculum for the past two years.
    CS3 had some bugs and would crash occasionally but generally was a good tool for interactive prototyping.
    We use the iMac with 4 GB Ram the latest Updates and Mac OSX 10.5.8
    Ever since the CS4 version came out the bugs are so bad and so numerous and random that I couldn't even run through a lecture / walkthrough.
    So I have now been forced to remove it from the curriculum altogether.
    Its a real shame that Adobe has not been able to fix it.
    Here are a few that I encountered in my class in just one hour:
    Attempting to highlight a word in text to change its color (crash) over and over had to edit in Illustrator.
    Aligning text (disappears) still in layer but gone forever
    Copying and pasting graphics from one layer to the next (image appears but is unselectable and has no layer)
    Changing a regular layer's order (error saying can't adjust master page layer)
    No behaviors showing up in the window on Navbar slices forecd to reboot to edit them.
    Degrading performance over time and slow response of UI sometimes up to 30 seconds until eventually crashing (assumed memory leak)
    Adobe please put some resources into making this software usable and focus on what you have before jumping to CS5.

    This is a user-to-user forum. If you want to reach Adobe, you need to contact them directly.
    Try the Contact Us or Submit Feedback links at the bottom of the page.

  • HP "another program has control of the device" Scanning Issue on Mac OSX 10.8.5

    I am running an HP C7200 series all-in-one on a Mac OSX 10.8.5 system. Everything has worked fine for years. Suddenly when I got to fax using HP Scan I get the following message: The scan cannot be performed because another program has control of the HP imaging device. This may be the result of a recent Mac update, but I'm not sure. I have tried many solutions from forums, including: restarting the program, restarting the printer while holding down the OK and Help keys, and installing RC Default Apps 2.1 and disabling the bundle extension preference. I have not yet uninstalled and reinstalled my HP software because I'm afraid something else will get messed up. 
    Also, I can scan by doing the following tedious chore. Open up the Systems Preferences, click on Print & Fax, click on Scan, Click on Open Scanner, click on Show Details, then fill in the scanning details. It's a pain compared to opening up HP Scan and clicking on scan. I can also scan via Image Capture but it also doesn't offer some of the nice features of HP Scan.
    Any other solutions?

    Hello NgnRoom,
    Welcome to the HP Forums.
    I see that you are having an issue with not being able to fax.
    As you stated , this could be caused by a Mac update.
    I suggest that we do an uninstall of the software and drivers and then while the unit is uninstalled, we then reset the printing system.  Here is a link on How to reset the printing system.  Once the reset is complete, I also suggest we Repair disk permissions.
    The next step would be to reinstall the printer on to the Mac.  Here is the link for the HP Print Drivers v3.0 for OS X.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Can I use this solution if using Mac OSX 10.9.5?

    Illustrator CS4 crashes whenever I attempt to print.  It crashes before the print box even appears.
    I found a possible solution here from Adobe Crash printing | Illustrator, InDesign | CS3, CS4 | Mac OS 10.7
    but it refers to 10.7 and I'm using a Mac OSX 10.9.5.  Does anyone know if I should use this solution??
    Any ideas or input greatly appreciated.  Thanks so much!

    By default, OS X Mavericks 10.9.5 Network MTU is set to 1500. If you perform the following at your SMB server, with an MTU of 1500, you will likely receive Message too long, and the SMB share takes a very long while to mount. This might be the contributing factor that has you believe it is an SMB MTU configuration issue.
    ping -c 1 -D -s 1500 smbserver
    If you dial the Network MTU down in a custom setting, the ping is immediate, and the SMB share mounts briskly. I tried values in small decrements until the message too long ceased.
    ping -c 1 -D -s 1472 smbserver
    I have done some searching and I do not see how, in Apple's current SMB implementation, that one can configure /etc/nsmb.conf to reduce SMB MTU size. See man nsmb.conf.
    More on this subject.

  • Why won't Firefox 4 on Mac OSX 10.6.7 quit when QUIT is selected? The window closes, but the application remains open necessitating a forced-quit. Until recently it worked fine. I've reinstalled Firefox but the problem persists.

    Firefox 4 on Mac OSX 10.6.7 won't quit when QUIT is selected.
    The window closes, but the application remains open necessitating a forced-quit. Until recently it worked fine. I've Downloaded Firefox again and reinstalled but the problem persists.

    Perform the suggestions mentioned in the following articles:
    * [[Firefox is already running but is not responding]]
    -> Profile in use
    * [http://kb.mozillazine.org/Profile_in_use]
    Check and tell if its working.

  • I believe that i have malware on my mac, osx 10.9.4. accordingly, i've tried to run clamxav (on my mac HD) but just get a spinning wheel, then have to shut down. any advice on how to stop spinning wheel or get rid of malware? please help. :-).

    i believe that i have malware (possible highjack of safari browser) on my mac, osx 10.9.4. accordingly, i've tried to run clamxav (on my mac HD) but just get a spinning wheel, then have to shut down. any advice on how to stop spinning wheel or get rid of malware? i have symnatic endpoint and, after scanning, it reveals nothing. please help. :-).

    are locked user files or that have incorrect permission a bad thing?
    Yes.
    why am i removing symantec?
    Short answer: Because it's worse than useless and worse than the imaginary "viruses" you're afraid of would be if they really existed. For the long answer, see below.
    1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to log in to it remotely. That threat is in a different category, and there's no easy way to defend against it.
    The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
    OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
    2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
    The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
    The following caveats apply to XProtect:
    ☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
    ☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
    As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
    3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
    Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
    ☞ It can easily be disabled or overridden by the user.
    ☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
    ☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
    Apple has so far failed to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. These failures don't involve App Store products, however.
    For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
    4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
    5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is a problem of human behavior, and a technological fix is not going to solve it. Trusting software to protect you will only make you more vulnerable.
    The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the scam artists. If you're smarter than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
    Software from an untrustworthy source
    ☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
    ☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software.
    ☞ Rogue websites such as Softonic and CNET Download distribute free applications that have been packaged in a superfluous "installer."
    ☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
    Software that is plainly illegal or does something illegal
    ☞ High-priced commercial software such as Photoshop is "cracked" or "free."
    ☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission.
    Conditional or unsolicited offers from strangers
    ☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
    ☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
    ☞ You win a prize in a contest you never entered.
    ☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
    ☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
    ☞ Anything online that you would expect to pay for is "free."
    Unexpected events
    ☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
    ☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
    ☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
    ☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
    I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
    6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
    Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
    Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
    Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
    Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
    7. Never install any commercial "anti-virus" (AV) or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
    Why shouldn't you use commercial AV products?
    ☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
    ☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
    ☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
    ☞ Most importantly, a false sense of security is dangerous.
    8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
    An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
    Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
    London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
    You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in everyemail attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
    The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
    9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
    10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It's as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

Maybe you are looking for