7303030 patch - an error occured while generating forms library files
Hi,
While applying 12.1.1 upgrade patch, 7303030 i got an error at A1000 phase
"An error occured while generating forms library files" continue as if it were successful..
As we can generate forms after completion of the patch, i selected yes .
Later, i got "An error occured while generating oracle forms files", here also i selected to continue.
Please tell me is this the right way to continue the patch?
I didn't find any errors in worker logs files, after all workers have quit, this error was reported.
After completion of the patch what necessary steps i need to perform.
Thanks,
Hi,
The errors are due to missing of pre-req patch 6400501
Forms 10.1.2.3 Compilation against an 11.2 Fails with DB PL / SQL ERROR 801 ... internal error [60603] [ID 1065020.1]
After Applying the patch, successfully gerated forms.
I applied the patch 6400501 but still with the error internal error [60603], have something more to be done?
Thank you.
Similar Messages
-
Error while generating forms library files
Hi,
I am trying to apply patch 7651091 as a prereq for 11845888, but it got failed with message
The following Oracle Forms objects did not generate successfully:
au resource JTFGDIAG.pll
au resource JTFSCGNT.pll
au resource JTF_GRID.pll
au resource ASTBOMAN.pll
au resource ASTRCINT.pll
au resource CSSRFND.pll
au resource CSSRTSK.pll
au resource APPCORE.pll
au resource APPDAYPK.pll
au resource FNDCONC.pll
au resource FNDSQF.pll
au resource CSSRISR.pll
au resource CSSRWKB.pll
au resource CSCSECPS.pll
au resource CSPPLPLN.pll
au resource CSPPLSPR.pll
au resource CSPTRREC.pll
au resource CSPTRVMO.pll
au resource CSUTILS.pll
au resource CSCCCCUS.pll
au resource CSCMNTPN.pll
au resource APPCORE2.pll
au resource APPFLDR.pll
au resource CSCSEDPN.pll
au resource CSCUTILS.pll
au resource CSCCCCRC.pll
au resource CUSTOM.pll
au resource FNDAPLT.pll
au resource FNDATTCH.pll
au resource VERT.pll
au resource VERT2.pll
au resource VERT3.pll
au resource APPTREE.pll
au resource VERT4.pll
au resource JTFTKMAN.pll
au resource VERT5.pll
au resource VERT1.pll
au resource JTFNOTES.pll
au resource OKCEXEVT.pll
au resource OKCKSRCH.pll
au resource OKCADART.pll
au resource OKSACTEV.pll
au resource OKCEXPOR.pll
au resource OKCTREE.pll
au resource OKSAUDET.pll
An error occurred while generating Oracle Forms library files.
Continue as if it were successful [No] :
I tried adadmin for generating form files, there also got error.
Document followed is 762891.1.
OS: hp ux Itanium
APP : 12.1.1
DB : 11.1.0.7
Please anyone help me out finding the solution.
Thanks
kumarHi;
Please see below thread, follow steps. If its not help please update thread
Oracle Forms didn't generate successfully INVOBGEN.pll, INVRSVFM.pll
Regard
Helios -
Hi all,
I've encounter a pretty big issue while trying to check if everything with my windows phone 8.1 app is all right. After creating package (*.appx) I launched Windows App Certification Kit 3.4 to run it against all the test. Each time I try I get an error saying
"an error occurred while generating the report. the application will exit" and Certification tool just crushes
I looked online for some solutions but couldn't find any. Somebody knows what is going on and how to fix it ?
Can't insert images into post because of not verified account so imgur:
http://imgur.com/ptT0cU3Try sending it to store anyway… I have the similar issue, the kit hangs when saving result and never complete it.
Another member has same question.
https://social.technet.microsoft.com/Forums/en-US/11910167-75e1-47d8-a0fb-fb8046c57f89/windows-app-certification-kit-31-reports-failure-due-to-crash-or-hang?forum=projectsiena.
If you want to test your app, you can also send to beta store and you can get response from the testers. -
I am the owner of this GPO and I can view the settings tab in any other GPO. But, I get the following message when I try to view the settings tab in one particular GPO:
An error occurred while generating report:
Object reference not set to an instance of an object.
Other posts I look at reference the same error, but with different circumstances, and thus, they specify that the hotfix is for to fix the error under
those circumstances.
I'm accessing GPMC on a Win 7 SP1 machine. DC is Server 2012 Standard.> Since I have to go through Edit to see the settings, and peruse the
> entire massive folder of settings to try to identify the bad one, it has
> been slow-going and I haven't found it yet.
You can filter ADM templates to show configured ones only, and you can
use the "show all settings" node. This will speed the work up - a little
bit at least :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Hello,
As you can tell from the title of this question, I am no expert with GPO's. Before I begin, I spent a few minutes to an hour searching and reading in hopes of finding the solution and avoid putting myself out there as a "GPO Newb". While
I found several posts and answers that were similar and were related, the questions and answers were more advanced and did present the solutions providing the person had initial knowledge already. That is not necessarily my case and I would ask for a
little patience and a bit of 'hand-holding' for what I need.
I run SBS 2011, and in Group Policy Management I have a custom GPO. In this GPO I define all my settings. I understand this may not be the best or most practical method of applying policies, but I am not very strict and have few settings. This
policy existed prior to my joining the company, and was migrated in to this SBS '11 from SBS '03. That may be the issue, but before making any changes I am seeking expert advice.
When I select that GPO, named "Main GPO", and click on the tab at the top "Settings" I see the error: "An error occurred while generating report: Object reference not set to an instance of an object."
I saw that when I right click the GPO > View > Options and select the tab "Reporting" that it states that for reporting to work the location of the .adm files must be specified. I see that my option for the location is set to "Default"
which by my guessing would be located in the C:\Windows\sysvol directory. Below is what I see there:
C:\Windows\sysvol\domain
C:\Windows\sysvol\staging
C:\Windows\sysvol\staging areas
C:\Windows\sysvol\sysvol
I think the problem is that my custom GPO are not inside the default location, which I speculate is: C:\Windows\sysvol\domain\policies (which I do see some objects there).
But instead I also see items in this folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just typed 'JOHN.LOCAL' is my actual local domain).
To further this, when I edit that custom GPO, then at the very top of the tree I right click on it and select Properties, I see a Unique Name listed there as a long string of numbers and letters, similar to a registry entry. I searched my server for
that same Unique Name and found it listed inside the folder: C:\Windows\sysvol\domain\policies
If I am correct with my assumption and basic knowledge, I should move all objects as follows:
-Move FROM: C:\Windows\sysvol\domain\policies
-Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
My concerns are that I am not correct at all, that I will break something, that there may be an easier fix than moving anything, or that I am overlooking something causing this error altogether.
Thank you for anyone's help and time with assisting me with this request.
John Fester> top "Settings" I see the error: "An error occurred while generating
> report: Object reference not set to an instance of an object."
That's due to a security setting (most possibly) your current OS does
not understand. Hard to find out wich exact setting it is... To resolve
this issue, we need the gtpptmpl.inf file residing in the policiy's
sysvol folder. To open this folder, edit the policy, move to computer
settings - policies - windows settings - scripts - startup, press "show
files". Then move two folders upwards and back down to
.\microsoft\windows nt\secedit. There you'll see the gpttmpl.inf - post
its contents and we'll have a look at it.
> location, which I speculate is: C:\Windows\sysvol\domain\policies (which
> folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just
That's perfectly ok - JOHN.LOCAL in fact is a symlink pointing to "domain".
> all objects as follows:
> -Move FROM: C:\Windows\sysvol\domain\policies
> -Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
No.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
VLD-0917: An unknown error occured while generating FACT
I'm trying to move my OWB repository from machine_1 to machine_2 this is what I did:
1. Export of the OWB metadata for the entire project. (machine_1)
2. Import of the OWB project in machine_2, import is successfull.
3. Configure locations for the source/target schemas (double, triple checked)
4. deploy the objects...
Here comes the problem: all tables referencing shared tables from other locations (i.e. modules), fail to generate with error
VLD-0917: An unknown error occured while generating FACT.
An unknown error occurred while generating FACT.
Error details: java.lang.NullPointerException.
following is the Design Center client log for the error:
**** Exception when generating ****
java.lang.NullPointerException
at oracle.wh.repos.sdk.environment.WBEnvironmentHelper.getDbLinkName(WBEnvironmentHelper.java:775)
at oracle.wh.service.impl.generation.common.WBGenerationUtils.isSameInstance(WBGenerationUtils.java:355)
at oracle.wh.service.impl.generation.ddl.TableGenerator.getMapSchemaName(TableGenerator.java:914)
at oracle.wh.service.impl.generation.ddl.TableGenerator.generateForeignKey(TableGenerator.java:1047)
at oracle.wh.service.impl.generation.ddl.TableGenerator.generateForeignKeys(TableGenerator.java:894)
at oracle.wh.service.impl.generation.ddl.TableGenerator.generatePhysical(TableGenerator.java:612)
at oracle.wh.service.impl.generation.ddl.DDLGenCommon.generate(DDLGenCommon.java:463)
at oracle.wh.service.impl.generation.ddl.TableGenerator.generate(TableGenerator.java:145)
at oracle.wh.service.impl.generation.ddl.DDLGenCommon.generate(DDLGenCommon.java:306)
at oracle.wh.service.impl.generation.ddl.DDLGeneratorManager.generateAUX(DDLGeneratorManager.java:186)
at oracle.wh.service.impl.generation.ddl.DDLGeneratorManager.generate(DDLGeneratorManager.java:101)
at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:423)
at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:311)
at oracle.wh.service.impl.generation.service.WhValidationGenerationTransaction.run(WhValidationGenerationTransaction.java:251)
Even more, this happens when I create a new FACT and a new shared table (located in another location) so it isn't the repository metadata being imported. If I remove the constrainsts referencing tables in other schemas then deployment is successfull.
Repository resides in an oracle database 10g r2 and OWB is 10.2.0.3 running on a cluster machine with AIX 5...
Any ideas how to solve this or a possible workaround?
Thanks,
GermanHi,
I realized that I'm getting this error for all fact tables. I cannot deploy any of them. What could be happening? I have a dimension that is linked to all facts which I changed recently: had to redefine its default hierarchy as a value-based one. I don't know if this affected my cubes.
Any idea what might be happening here?
Best Regards,
--oswaldo.
[osantos] -
VLD-0917 - unknown error occured while generating (OWB10R2)
I have two cubes which I'm trying to drop via the control center, so that I might add a new version with a new dimension. However, when I try deploying the drop, I get the "VLD-0917 - unknown error occured while generating <cubename>" together with:
An unknown error occurred while generating <cubename>. Error details: java.lang.NullPointerException.
Any ideas?
edHi,
I realized that I'm getting this error for all fact tables. I cannot deploy any of them. What could be happening? I have a dimension that is linked to all facts which I changed recently: had to redefine its default hierarchy as a value-based one. I don't know if this affected my cubes.
Any idea what might be happening here?
Best Regards,
--oswaldo.
[osantos] -
Error occurred while generating PDF. Reason: ERROR_PDF_CONVERSION
I get an error generating my PDF whenever someone's name has a special character's in their name such as accents and diacritics.
Is this a bug or how do I properly set the charset for the <cfhtmltopdf> tag. I didn't have this issue with Coldfusion 9 and cfdocument. Any help in this regard would be much appreciated.
version: Coldfusion 11 Update 3 on Windows Server 2008 R2 on IIS 7.5
SEE STACK TRACE BELOW
coldfusion.document.webkit.PDFgErrorHandler$ServiceManagerConversionException: Error occurred while generating PDF. at coldfusion.document.webkit.PDFgErrorHandler.handleConversionError(PDFgErrorHandler.java:1 88) at coldfusion.document.webkit.HttpPDFRequestHandler.requestPDFGeneration(HttpPDFRequestHandl er.java:113) at coldfusion.tagext.lang.HtmlToPdfTag.processPDFgRequest(HtmlToPdfTag.java:1331) at coldfusion.tagext.lang.HtmlToPdfTag.handlePDFgConversionRequest(HtmlToPdfTag.java:1466) at coldfusion.tagext.lang.HtmlToPdfTag.convertToPDF(HtmlToPdfTag.java:1413) at coldfusion.tagext.lang.HtmlToPdfTag.doEndTag(HtmlToPdfTag.java:1551) at cfcfhtmltopdf_createPDF2ecfm2090701148.runPage(c:\inetpub\wwwroot\myapp.com\includes\docs \cfhtmltopdf_createPDF.cfm:25) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:246) at coldfusion.tagext.lang.IncludeTag.handlePageInvoke(IncludeTag.java:736) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:572) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2986) at cfmethods2ecfm1148258034$funcSAVEPROXY.runFunction(c:\inetpub\wwwroot\myapp.com\cfc\docs\ methods.cfm:472) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:487) at coldfusion.runtime.UDFMethod$ReturnTypeFilter.invoke(UDFMethod.java:420) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:383) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:95) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:334) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:533) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:648) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:457) at coldfusion.runtime.CfJspPage._invoke(CfJspPage.java:2424) at cfmethods2ecfm1658643382$funcPROCESSSTEP.runFunction(c:\inetpub\wwwroot\myapp.com\cfc\mem berResults\methods.cfm:377) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:487) at coldfusion.filter.SilentFilter.invoke(SilentFilter.java:47) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:383) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:95) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:334) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:533) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:648) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:457) at coldfusion.filter.ComponentFilter.invoke(ComponentFilter.java:251) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:480) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:42) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:142) at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:30) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:94) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:58) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.xml.rpc.CFCServlet.invoke(CFCServlet.java:156) at coldfusion.xml.rpc.CFCServlet.doPost(CFCServlet.java:348) at javax.servlet.http.HttpServlet.service(HttpServlet.java:646) at javax.servlet.http.HttpServlet.service(HttpServlet.java:727) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:303) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:241) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:501) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:171) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:422) at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:199) at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.jav a:607) at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:314) at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source) at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source) at org.apache.tomcat.util.threads.TaskThread$WrappingRunnable.run(TaskThread.java:61) at java.lang.Thread.run(Unknown Source)Does anyone have any suggestions?
I've tried:
adding charset meta tags to the top of my outputted HTML contents that comprise the PDF
I've tried adding the <cfprocessingdirective pageencoding="utf-8" /> but doesn't seem to help.
#encodeForHTML(pdfHTMLVariable)# and even just tried encoding the individual variables that contained the special characters but that didn't seem to help anything as encoding them still won't work I'm assuming if the Charset is mis-matched.
Does the <cfprocessingdirective pageencoding="utf-8"> just have to be within the CFC method or does it need to be within the <cfhtmltopdf> tag?
Any input or things to try would be much appreciated as this is a regression for our app.
**As a side note: I would still just use CFDOCUMENT, but there was a different issue where the images were outputting a RED X where the image is supposed to be. Which from what I have been able to uncover has something to do with the server certificate not being trusted or something. However, our SSL provider is listed in the ROOT Certificate Authorities so not sure what's going on with that. Those images were being output with cfimage action of writeToBrowser .
I'd really like to fix the encoding issue does this have anything to do with language packs or missing languages of that sort? My app displays the page just fine when the UTF-8 charset meta tag is set. -
An error occured while generating a new report template
I have installed the Crystal Reports 2008 V2 and also the support pack. Installed the SAP Integration Kit XI 3.1 and the latest service pack 2.7. When I try to use the SAP Tool bar from Crystal Report , I can connect/see the queries but when I select any query to create a report I am getting an error message
"An error occured while generating a new report template". Any advise ? How do I turn on the trace in the client ?
Thanks,Hi,
Did you update your Fix Pack...
Here is solution for Client...
To turn tracing on for client applications, you can use the following steps:
1. Click Start > Settings > Control Panel > System > Advanced > Environment Variables button.
2. Under the User Variables, add the following variable and value:
For Enterprise XI:
Variable Name: BOE_LOGGER_ENVIRONMENT
Variable Value: -trace -loggingPath c:\logs
For Crystal Analysis, Crystal Enterprise, and Crystal Reports version 10 and earlier:
Variable Name: CRYSTAL_LOGGER_ENVIRONMENT
Variable Value: -trace -loggingPath c:\logging
Regards,
Bashir Awan -
Error when creating SharePoint WebPart - "An error occurred while generating the project"
I am getting a Error in Visual Studio when I create a SharePoint Web Part.. "An error occurred while generating the project. Please see the Visual Studio Output window for more information."
I have checked the Output window and there is noting in it. When I click OK I get the next error that states "Object reference not set to an instance of an object".
After I click oky.. There seems to be files missing in the project menu..
I am using Visual Studio 2013 Ultimate and SharePoint 2013 Enterprise. These run on Windows Server 2012 R2..
This mind boggling.. Hope someone can help me..
ThanksHi,
For better troubleshooting, I suggest you do as the followings:
Create a new clean project. In this projcect, you can just create a new web part to check whehter it works.
Debug the project step by step and try to find which object reference not set to an instance of an object.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
An error occurred while saving the following file
I want to build an app but I get this message:
An error occurred while saving the following file:
C:\Acquire U6 DS&FTP\Acquire U6 DS&FTP.vi
Nothing more, absolutely nothing more.
Before that I could build it without problems, now I can't. The file in the message is the main file (by the way it runs fine). I've tried creting a new project but it doesn't work.
I really hope somebody can help me.
Thanks,
JuanMWhat's changed in your code? Have you tried undoing anything or reverting back to a pervious version?
Reese, (former CLAD, future CLD)
Some people call me the Space Cowboy!
Some call me the gangster of love.
Some people call me MoReese!
...I'm right here baby, right here, right here, right here at home -
API5317: Error occured while writing to archive file
We have been making daily archives for weeks and then one morning started getting this error:
API5317: Error occured while writing to archive file f:\OWB\Archives\Daily\backups\Friday\projects\erm_phase1\project.mdl
We have checked space on the disc, and running the archive from different PCs. Is possible that there is a limit on the archive file? The archive file is in the order of 21M. I am worried about the upgrade to the new version if we cannot make archives. Any suggestions?Marlene,
Which OWB version are you using and what is the database version?
Regards:
Igor -
Error occurred while building the following file
hi,
i get an error while compilating my programm. i did not change the vis listed below, they are standard express vi's...
An error occurred while building the following file:
C:\Program Files\National Instruments\LabVIEW 8.0\vi.lib\express\express analysis\CurveFittingBlock.llb\subCurveFitting.vi
Error 1003 occurred at ABAPI Dist Chg and Save VIs.vi -> ABAPI Dist Build LLB Image.vi -> ABAPI Copy Files and Apply Settings.vi -> EBEP_Invoke_Build_Engine.vi -> EBUIP_Build_Invoke.vi -> EBUIP_Build_Rule_Editor.vi -> BUIP_Create_Build_Rule.vi -> EBUIP_Global_OnCommand.vi -> EBUIP_Global_OnCommand.vi.ProxyCaller
Possible reason(s):
LabVIEW: The VI is not executable.I would recommend to update to at least LabVIEW 8.0.1 (free update) and masscompile the vi.lib folder.
You can download the update here:
http://digital.ni.com/softlib.nsf/websearch/4C1209D42320BCFD8625711C005FB25B?opendocument&node=13207... -
An unknown error occurred while discovering dynamically-related files
This is my first attempt building a wordpress site using Dreamweaver and it's been nothing but unsuccessful.
I have downloaded and reinstalled Wordpress and Mamp at least 7 times, and even followed Lynda.com (Dreamweaver and Wordpress: Core Concepts) tutorials to ensure my testing server was executed properly, but I still can't resolve "an unknown error occurred while discovering dynamically-related files. Retry". I've rebooted my computer a handful of times and made sure I ran programs in a systematic order, but nothing. I'm running CS5 on a Mac.
As you can see from the first image, I have the error highlighted in yellow. Below I've added pictures from all the essential settings site setup in hopes I made a mistake and someone will catch it. PLEASE help me resolve this issue. I am so frustrated that I can't figure this silly problem out...I looked through both articles again, and in both he notes that if you're using MAMP default ports, it's necessary to reference :8888. I am using the defaults and have included :8888 for that reason.
"Note: If you are using MAMP on Mac OS X, and decided to use the MAMP default ports, change the value of Web URL to http://localhost:8888/check_php/. Adding :8888 is necessary only if you're not using the Apache and MySQL defaults."
In any case, I've tried changing my ports to 80 and 3306, not including the :8888 in the URL, and I didn't get different results. For that reason I just returned to the MAMP default settings...
Thanks again for helping me brainstorm! -
DW/WordPress "An unknown error occurred while discovering dynamically-related files"
I am trying to set up Dreamweaver CC 2014 to work with my WordPress 4.0 site on the remote server where it is installed. Server access is fine, tests ok, files all listed and synchronize no problem. But whenever I try to discover dynamically related files I get "An unknown error occurred while discovering dynamically-related files". What's going on? (Permalinks are set to default btw)
Easily fixed! I just discovered that under my server settings I had both "Remote" and "Testing" ticked. I unticked "Remote" and it works fine. Only tick "Testing".
Maybe you are looking for
-
Can't get into BIOS on new Z97M-G43 Mobo
I just received all the components (below) for a new build. When I power the system up, I get a screen with the following: EFI Shell Version 2.31 [4.633] Current running mode 1.1.2 Map: Cannot find required map name Press Esc in 5 seconds to skip st
-
I have many old CDs with files. In order to organize and search them, I would like to make a searchable file listing all the documents on the CDs. I once did this in DOS (it was a "list files" command). Is there anyway to do it in OS X-- Maverick?
-
Hi, unable to unlock my i pod touch,
Hi, unable to unlock my i pod touch, the pod says connect to itunes, but wen connected to itunes it says unabe to connect without passcode
-
Classic Report limit the number of rows displayed
Hi All, In my application I have a classic Report which show the data of a simple query. For lay-out reasons I want to limit the number of display to 5 instead of the default 15. I've looked in several forums and they told me that I have to set the n
-
[SOLVED] Aria2 stopped working
Aria2 stopped working for me since around a week ago. This is what I'm getting now: $ aria2c --log=- http://arm.konnichi.com/extra/os/i686/aria2-1.6.2-1-i686.pkg.tar.gz 2010-01-28 20:14:59.488885 INFO - <<--- --- --- --- 2010-01-28 20:14:59.488981 IN