7304 adds latency when writing the config

I have many 7304 routers, all experiencing the same issue. When packets are transiting the router, and I do a "wr mem" or "copy run start" command, the latency of the packet forwarding jumps up to 240ms momentarily.
(edge router) --> (7304) ---> (cloud) ---> (edge router) . Doing an extended ping from the left edge router to the right edge router...the max latency of the pings is approx 4 ms. Doing the same pings and then doing a "wr mem" on the 7304 causes the latency of the pings transiting through the 7304 to jump to 240ms momentarily. Saving the config to NVRAM causes the 7304 router to stop forwarding the packets momentarily, causing jitter to the application.
I've tried adjusting the buffers as well as adjusting the process-max-time, but I still can't resolve this issue. I am running the latest IOS c7300-k91p-mz.122-33.SB10.bin

Hi...
i think better you make new page every other external sites and go new window every visitor click.
In new page, in top frame write with your policy about external website and bottom frame with your external website.
Thank's
Fahd Centro International World News

Similar Messages

Error when writing the trace in ST01

Hi Gurus,
Good day!
Please advise on how can I resolve this issue in ST01. I'm getting an error "Error when writing the trace No such file or directory".
Appreciate your help.
Cheers,
Virgilio

Hi,
Check this link
http://help.sap.com/saphelp_nw04/helpdata/EN/ae/ed0ad513d0074e944879f05ef318d5/content.htm
Regards,
Renu

Ü Character being replaced ? when writing the data to CSV from DB in Linux

Hi All,
Can anyone help me in understanding the exact cause of my issue
Issue Description: Ü Character being replaced ? or when writing the data to CSV from DB in Linux.
Shell used: ksh
Actual string: MÜNCHENER RÜCKVERSICHERUNGS-GESELLSCHAFT AG
Output String: M?NCHENER R?CKVERSICHERUNGS-GESELLSCHAFT AG
locale ouput:
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
Environment variable set: NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
Linux Version: 2.6.18-128.el5 128 bit
java Version: 1.6
Oracle DB version: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
When i query directly from DB i get the data in right format but when i write the same data to a csv file then the above problem occurs.
Can anyone please suggest me what could be the cause for this issue?
Regards,
Shiva

Hi Srini,
We are using Java based ETL specifically written for our application. we are using sqlplus to make DB connections. am using vi editor to see the data. After the Extraction process the data processed in also in the wrong format.
Regards,
Shiva

What is the best way to avoid latency when using the io plug in?

What is the best way to avoid latency when using the io plug in?

Hi colin a.
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
Logic: About I/O buffer size and monitoring latency
http://support.apple.com/kb/ht1314
Cheers,
- Judy

Issue when starting the config tool

Hi Everyone,
When I have started the Config tool, the "SAP J2EE engine - Config tool" screen comes up. Then I have a pop up which says that "Do you want to use the default DB settings". When given "Yes", it goes connecting to database. During this time I receive the following error message in the command prompt and config tool screen disappears.
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.librar
y.path
Exception occurred in openJar(
10.176.34.95\rootbin\usr\sap\QSR\DVEBMGS00\j2ee\
configtool\usr\sap\QSR\SYS\jdbc\tbx\jt400.jar) :
java.io.FileNotFoundException:
10.176.34.95\rootbin\usr\sap\QSR\DVEBMGS00\j2ee
\configtool\usr\sap\QSR\SYS\jdbc\tbx\jt400.jar (The system cannot find the path
specified)
I have mentioned JAVA_HOME in the enviromental variables as well.
I am able to start visual admin successfully.
I am currently with java version jre1.6.0_05.
Please assist on the issue.
Thanks and Regards

Hi,
Thanks for the reply. I have mapped the network drive (Rootbin on 'OS/400) on to my local machine, now I am able to login config tool, but comes up with different error.
Error occured while working with Configuration (Scanning)
Msg: Error while connecting to DB
I am able to see only the secure store in the config tool.
Please provide your thoughts.
Thanks and Regards

SSAS -- Having the issues when writing the queries

Hi All,
Need help on SSAS Queries ..
1. We have a cube with ROLAP Storage and dimension is having the MOLAP Storage.
We are facing the data discrepancy issues .. So , we are writing the corresponding sql queries at semantic side to test data .....
But when we write the queries . the data is not matcing and we tace teh query , it is issuing the distinct for some of the feilds ...
Please help on which basis they are taking the distinct ..
Thanks,
Mahesh Alam

Hi Mahesh,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Charlie Liao
TechNet Community Support

Short Dump when writing the file to Unix.

ST22 Dump Log.
Short text Error when writing to the file "/appl/data/backlog/outbound/bop_bwfcstngall_erp
What happened? Resource bottleneck
The current program "ZPS_BACKLOG_NEW_READ" had to be terminated because
a capacity limit has been reached.
_Error analysis
An error occurred when writing to the file
"/appl/data/outbound/bop_bwfcstngall_erp_20110919_151220.dat".
Error text: "A file, file system or message queue is no longer available."
Error code: 52

ask your basis collegues, the dump says that the file system was not available, so it is clear that your writing to Unix could not happen.
have a look into OSS Note 1100926 - FAQ: Network performance

Error when writing the diaporama to WMV

I created a diaporama with adobe premiere organiser8 and saved it in WMV. I made a dvd and after viewing it on TV and noticing some errors I returned to organiser8 and brought the corrections needed . I tried to save it again in WMV so that i could make another DVD but now it is giving me the message that an error occurred when trying to create the file and was not able to create the WMV.
I have done this procedure quite a few times and never had any problem.
I worked so hard doing this diaporama with comments and music I hope somebody can help me
Thank you in advance to whoever will answer and come up with a solution

You're talking about creating a slideshow using the Organizer's slideshow creator, right?
If so, you'd be best not to output this slideshow as a WMV, unless you plan to play it on a computer.
If you're planning to burn it as a DVD, your best workflow is to select the output option Send to Premiere Elements. Once the slideshow is in Premiere Elements, you can output a good, quality DVD from there.
And, of course, as always, ensure that your photos are no larger than 1000x750 pixels in size before you add them to your slideshow to guarantee optimal performance and minimal rendering times for your DVD!

Cisco Prime 2.1: Not writing running config after template deployment

I have noticed that Prime is not writing the running config after CLI template deployments. I deployed a changeset to over 1100 devices the other night and noticed that the configs had not been written the startup config.
I did some testing today and am using the following CLI template:
#MODE_ENABLE
copy running-config startup-config
#MODE_END_ENABLE
All tests failed. I found the syntax for enable mode from the following link:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-0/user/guide/prime_infra_ug/create_temps.html#31705
Any ideas on why it isn't writing the configs by default or how to force it through a template?

I've got a little bit more information for you on this. If you were to login to a switch, enter enable mode and type "copy running-config startup-config" and press ENTER you'd see this:
Destination filename [startup-config]?
You'd then read the documentation and think to yourself "Self, I better use the following syntax in my CLI template"
#INTERACTIVE
copy running-config startup-config<IQ>Destination filename [startup-config]?<R>startup-config
#ENDS_INTERACTIVE
But in Cisco's world, I guess that just doesn't make any sense at all. Why use the actual interactive question when you can simply just use the first word (even though all of their examples show multi-word interactive questions). The correct syntax would then be:
#INTERACTIVE
copy running-config startup-config<IQ>Destination<R>startup-config
#ENDS_INTERACTIVE
#START_SARCASM
Duh! It's so obvious. Why in the world would one ever think anything other than that you would simply take the first word in the interactive question and just leave it at that. I feel so stupid
#ENDS_SARCASM

How to change nickname when writing reviews in App Store?

Hi guys, I had an iTunes account that I don't use anymore but I want to use the nickname I had when writing the reviews in my new account, it won't let me chose it because it's already taken by my older account... Is there a way to change it?
Thanks in advance

If you didn't already sort it--
in iTunes, go to Store | View My Account. Make sure to enter the email for your old account.
The main Apple Account Information screen has an Edit Nickname button next to your nickname. You should be able to change that nickname in the old account.
Then log out of the Store, log back in with the email for your new account, and see if it will let you use the old nickname.
It might be necessary to delay while the computers figure out the old name is free, if it doesn't work immediately.

WHEN IN THE WORLD WILL ADOBE ADDRESS FOLDER SHARING ON CLOUD????????????????

My company holds a team license and we cannot share folders. When will this be addressed as oppose to working on behance and other add-ons when will the fundamentals be addressed?

We had the same issue with a catalogue client. We found a very simple and cost effective solution. Our Internet provider http://www.forttechnology.ca/ and Shawn setup OwnCloud for us. We have 1TB of storage and folder sync, we can provide access to all of the page files to the client with out having to pay for seats on a team.
We returned all of our CC for Teams to Adobe with refunds through our credit card company with a "failure to provide" clause the credit card company took care of Adobe's BS of paying 6 month bail out fees. We had to apply for single user accounts because Adobe can't down grade accounts from "team" to "single" user accounts. We saved enough money doing this that the reduction in price from Team to Single accounts it paid for the the OwnCloud Shawn setup for us and we still have a little left over for a case of beer every month, thanks for screwing up Adobe we would have kept paying for no service if it wasn't for Shawn at Fort Technology.
You don't have to wait for Adobe, the software is good and works well with third party cloud services, Adobe has a lot of growing up before they will ever get into the Cloud technology.
Don't let Adobe rob you, Adobe stealing for their own customer base and it will catch up with them sooner or later.

Quicktime movies compress from HD to TV Ratio when writing DVD

I'm using version iDVD 7 (sorry...no forum for v.7 ???).
Using "ONE STEP DVD from MOVIE" feature to convert a Quicktime Movie that was created in Final Cut Express into a DVD. The item properties in FCE are letterbox 1920x1080. After writing DVD, the image on the screen is compressed to TV ratio. QUESTION #1: How do I avoid this and QUESTION #2: There's probably a better software app for making DVDs from FCE...what do you suggest? Many thanks!!!

Hello again...I have some conflicts in the information provided and the links to others therein.
Article TS1611 mentions to save in 854x480 NTSC, but there's no option to that ratio...in either HD or other formats. The other direction to use the specific compression is something that I was not doing. I was going with the default...so Article TS1611 is a hybrid solution at this point.
The second link suggestion takes me into iDVD's themes...which I do not use. I only want the player without all the graphic stuff. That's why I go to FILE>"One step DVD from Movie".
The other mention within an article suggested using a program that "amorphs" the file during stamping. This user had a file that when exported from FCE was not in the 16:9 ration. Mine are in the 16:9 ratio in HD and then in changes the ratio to 4:3 when writing the DVD within iDVD.
So all seems to be correct, then the DVD plays in TV ratio.
Thanks again in advance!

Failed to register sharepoint services while running the config wizard - spupdateconcurrencyexception was thrown

am getting the below error when running the config wizard :
09/16/2014 12:08:05 13 ERR Exception
Microsoft.SharePoint.Administration.SPUpdatedConcurrencyException: An update conflict has occurred, and you must re-try this action. The object SearchDataAccessServiceInstance was updated by IN\SYSTEM, in the OWSTIMER (13400) process, on machine SIDCENPA020.
View the tracing log for more information about the conflict.
   at Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance.UpdateWithRetrying()
   at Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance.Provision()
   at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.InstallServiceInstanceInConfigDB(Boolean provisionTheServiceInstanceToo, String serviceInstanceRegistryKeyName, Object sharepointServiceObject)
   at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.InstallServiceInstances(Boolean provisionTheServiceInstancesToo, String serviceRegistryKeyName, Object sharepointServiceObject)
   at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.InstallServices(Boolean provisionTheServicesToo)
   at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
09/16/2014 12:08:05 13 INF                  Entering function Common.BuildExceptionMessage
can anyone help what is the issue, help is appreciated!

the below is the err i got from eventviewer:
Log Name:      Application
Source:        SharePoint 2010 Products Configuration Wizard
Date:          27-09-2014 11:42:05
Event ID:      100
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Srvr123.com
Description:
Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web
Server Extensions\15\LOGS\PSCDiagnostics_9_27_2014_11_40_17_795_874483671.log, fix the problem, and run this configuration wizard again.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="SharePoint 2010 Products Configuration Wizard" />
    <EventID Qualifiers="0">100</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-09-27T06:12:05.000000000Z" />
    <EventRecordID>380130</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Srvr123</Computer>
    <Security />
</System>
<EventData>
    <Data>Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common
Files\Microsoft Shared\Web Server Extensions\15\LOGS\PSCDiagnostics_9_27_2014_11_40_17_795_874483671.log, fix the problem, and run this configuration wizard again.</Data>
</EventData>
</Event>

Command execution failed: An error occurred when add "RTCUniversalConfigReplicator" to "RTC Local Config Replicator".

Hello.
I have a problem about Lync Server 2010 setup. While i am on Lync Server 2010 deployment wizard on first level of setup.
i got below error, i can't cont. to setup.
> Enable local replica service
Enable-CSReplica -Verbose -Confirm:$false -Report "C:\Users\Administrator\AppData\Local\Temp\2\Enable-CSReplica-[2011_08_15][11_51_51].html"
Creating new log file "C:\Users\Administrator\AppData\Local\Temp\2\Enable-CSReplica-b78e5ec9-0ab2-4397-a080-836e3001e88d.xml".
Enable replica service for the Lync Server computer.
Creating new log file "C:\Users\Administrator\AppData\Local\Temp\2\Enable-CSReplica-[2011_08_15][11_51_51].html".
Warning: Enable-CSReplica failed.
Warning: Detailed results can be found at "C:\Users\Administrator\AppData\Local\Temp\2\Enable-CSReplica-[2011_08_15][11_51_51].html".
Command execution failed: An error occurred when add "RTCUniversalConfigReplicator" to "RTC Local Config Replicator".

Hi, softwareman,
Please check whether you’ve added the admin account to CSAdministrator, RTCUniversalServerAdmins
and RTCUniversalGlobalReadOnlyGroup.
And there’s a
deployment guide for reference. Hope that helps.

Error on Production Orders Add-on when 2 or more users at the same time.

Hi.
Our add-on creates special production orders (SAPbobsCOM.BoProductionOrderTypeEnum.bopotSpecial) with no problem when used by one user, but if there are two or more users everyone on his own SAPBO session it starts to throw different errors, we think it may be a concurrence problem due to several transactions.
Here a short brief of the code sample and the process:
(error handling and object members not included in the sample)
oDoc.ProductionOrderType = SAPbobsCOM.BoProductionOrderTypeEnum.bopotSpecial
If the oDoc.Add() is correct, We get the last production order created and release it:
Me.sKey = Me.Company.GetNewObjectKey
oDoc = Me.Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oProductionOrders)
oDoc.GetByKey(Me.sKey)
oDoc.ProductionOrderStatus = SAPbobsCOM.BoProductionOrderStatusEnum.boposReleased
oDoc.Update()
Then we go for an inventory Entry:
oDoc = Me.Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenEntry)
oDoc.DocDate = Date.Now
oDoc.Lines.BaseEntry = Me.sKey
oDoc.Add
And Finally to close the production order:
oDoc.ProductionOrderStatus = SAPbobsCOM.BoProductionOrderStatusEnum.boposClosed
oDoc.Update()
This works fine when only one user is using the add-on, but in the end there wil be at least eight users simultaneously working with this add-on
The test:
We have four users creating production orders with the add-on.
Two of them get the usual success messages and the created documents in SAPBO are all correct.
The other two users get diferrent errors messages during the process.
If they wait and try again to run the process it works fine.
Repeating the test get errors on different users depending on which one started the process first.
Our client needs to generate beetwen 900 and 1200 production orders per day, so they can't wait until the process is free for each user to work with it.
The common erros detected are:
Changing the status of the production order:
-5002 - The warehouse is not defined for the item.
-4002 - To generate this document,
first define the numbering series in the Administration module
-1029 - Field cannot be updated
Adding the production order and inventory entry:
-2038
-1116
-5002
Regards,
Omar Fonseca

The start transaction model didn't Fit well with all the process we are doing, but the idea of locking or holding the other users seems to work pretty fine, we are now using a flag to determine if someone is doing the process and put in hold the new ones.

7304 adds latency when writing the config

Similar Messages

Maybe you are looking for