7310 copy function won't work.

I just installed a new black cartridge and I can print from my computer. But I cannot copy, fax. The message reads "new cartridge successfully installed, press OK to continue". I press OK, but the whole panel appears dead. The power light no longer is on, either.
I have unplugged everything and closed the computer-- gone through the manual. seems like I need a total system "reset" button? or is this an electrical problem??????

You can perform a partial reset as described here. There is also a discussion here of resetting the power adapter by unplugging it for a period of time.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Wacom Intuos Tablet Touch Function Won't Work On Mac OS X

Hi there,
I recently purshased a Wacom Intos pen & touch tablet, model CTH-480. But the touch function won't work.
I've done the following, but it still won't work:
1. Re-install the driver to the latest. (Driver Driver 6.3.8-2 from http://us.wacom.com/en/support/drivers/)
2. Turned on the switch on the tablet. Whenever I touch the tablet, the blue signal light at the top-right corner will be on.
3. In the app named "Wacom Desktop Center", the "Touch Settings" shows "Touch On". So the software is configured well.
4. In the "System Preferences" --> "Walcom Tablets", the "Touch Options" is available and is able to configure. There's no option there which saya "Enable Touch Input" as seen in some tutorials online.
The other functions are perfect. I can use the pen, I can set custom functions to all buttons on the tablet.
Someone meet similar problems before? I sincerely appreciate your help!
Best Regards,
A new Walcom user in desperate

I had the same exact problem. No matter what I did, tablet LED lights and diagnostic testing mode indicated touch sensors working but no corresponding screen functions. This included removing the app/plist installation through CleanMyMac 2 and a subsequent reinstall. You may have fixed your problem by now but Wacom customer support sent me this advice within a day and it worked for me on first try. Touch gesture and pen functions seem to work equally well now.
Key is to use the uninstall utility within the Wacom app itself.
Thank you for contacting Wacom Customer Care. The problem that you received maybe cause by a corrupted driver file. While you may have already reinstalled the driver, please follow these specific instructions:
Open your Applications folder and locate any Tablet or Wacom Tablet folders you have
Use the Utility in each of these folders and click ‘Remove’ under ‘Tablet Software’
Once the software is removed, restart the computer
Once this is complete, download and install the latest 6.38 driver from: (Current as of Aug 2014)
http://cdn.wacom.com/u/productsupport/drivers/mac/professional/WacomTablet_6.3.8 -2.dmg
As always, make sure your tablet is connected directly to your computer. Avoid using USB hubs, keyboard/monitor ports, or docking stations with the tablets, as they can cause inconsistent behavior.

Shuffle Function won't work

I plugged my iPod mini into another computer, this loaded all the songs on their iTunes on to my iPod. After reloading all my songs my shuffle function won't work and all songs play in order. I have reset my iPod but this has not worked. Any ideas?
Rob

I plugged my iPod mini into another computer, this loaded all the songs on their iTunes on to my iPod
It's most likely the copyright Gods punishing you for stealing music...

Copy function does not work

HelloI have had the HP1510 since december this year. The copy function has never worked. When I press the copy button nothing happens. When I press colour and black and white it does print a test page. The printer IS CONNECTED TO A WALL SOCKET. It has been cleaned and has new cartridges. Can you help?

Welcome to the HP Community , I saw your post about your Deskjet 1510 that is unable to produce copies, and wanted to reach out. I would suggest trying a power reset as your last resort to getting the copies to work. If a reset does not help, try another wall outlet. If the copies still do not work, chances are the scanner mechanism has failed internally. I'd then suggest contacting HP to inquire about a printer replacement, or trade in. I will include their contact details below for you. Turn the printer on.
With the printer turned on, disconnect the power cord from the rear of the unit.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the unit.
If the printer does not turn on by itself, press the Power button to turn it on. Step 1. Open link: www.hp.com/contacthp/
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number
Case number and phone number appear. Good luck to you!Click the thumbs up below if you wish to send me a "thanks" for my attempts to help you today!

Copy Function is Not Working properly In Order Management

Hi,
Description-
When an order with remnant model is copied, it copied only the topple model line and they include items attached to the top model line. It doesn’t copy the
option class lines and the option item lines (unshipped and shipped).
Example-
Enter an order with for pd-pto-model. See order#21231.The ordered quantities and structure of the model is shown below:
pd-pto-model 5 qty
pd-std-item1 (included item) 5 qty
pd-pto-oc (option class) 5 qty
pd-std-item1 (included item with rfr checked) 5 qty
pd-std-item2 (option item with rfr checked) 5 qty
pd-std-item3 (option item) 5 qty
Booked the order and pick relased the order. While shipconfirming only shipped 5 qty of pd-std-item3 and staged the rest. On querying the sales order, the line status is seen correctly as follows:
pd-pto-model Closed
pd-std-item1 (included item) Picked
pd-pto-oc (option class) Closed
pd-std-item1 (included item with rfr checked) Picked
pd-std-item2 (option item with rfr checked) Picked
pd-std-item3 (option item) Partially Interfaced to receivables
Copied this order from the order header. The new order# is 21232.On querying the order, I see only 2 lines as follows:pd-pto-model.
Anyone can help me on this issue.
Thanks,
Chinna

haisrig wrote:
Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.Hi
It sounds to me that you've been lucky for 20 years then.
Local POD variables on the stack that aren't explicitly initialized can contain any value. Here's what I see in your app with dbx
(dbx) run
Running: sel
stopped in main at line 9 in file "sel.cpp"
    9      sleeptime.tv_sec = 60;
(dbx) print sleeptime
sleeptime = {
    tv_sec = -4198732
    tv_usec = 0
}That's on a Solaris 10 SPARC machine. If I try it on a Solaris 10 x86 box then I get
(dbx) print sleeptime
sleeptime = {
tv_sec = -830490588
tv_usec = 134510556
and I see the behaviour that you describe.
Paul

Copy Function Doesn't Work After Updating user.js File

I tried the Copy Function at the web site www.gogvo.com and got an error message from Firefox that Copy wasn't enabled. I got more info and created a user.js file in my Profile with the above site inserted following directions on the Troubleshooting Help page. I restarted Firefox but still can't use the Copy Function when I right-click a highlighted field to Copy. I have no problem when I use Internet Explorer 9 with my Windows 7 Home Premium. I have the latest version of Firefox. I have no problem copying on other sites, such as MSN Hotmail.

I tried {Ctrl+C} and that doesn't work. I deleted the user.js file and downloaded the allowclipboard-helper file extension, and that doesn't work. I only have this Copy/Paste problem HERE: [http://www.gogvo.com/affiliates/optin_message.php GVO Responder Opt-in Message Edit] and don't have any Copy/Paste problems anywhere else. Is there another solution to try?

The copy function doesn't work for years

Hi experts,
i have a copy function for copying a combination of version, vtype and fiscyear in another combination e.g.
version = 0, vtype = 10 and fiscyear = 2010 should be copied to version = 101, vtype = 60 and fiscyear = 2011
As far as the year doesn't change the function works for example with the same combination as before just from
fiscyear = 2010 to fiscyear = 2010 but when i try to copy from 2010 to 2011 no data will be generated.
The interesting thing is that i have all the TO-Variables for version, vtype and fiscyear in the filter and all of these char.
are selected as to changed char. in the planning function. I defined all the From-variables version-from, vtype-from and
fiscyear-from in the from part of function and the TO-variables as version-to, vtype-to and fiscyear-to in the TO-Part of the function.
Has anyone an idea why it's not working for different years?
Thank you all in advance.
Kind regards,
Ansarial

Hi Cornelia,
i tried to change the fiscper too within the copy planning function and i had to work with exit variables to derive the fiscper from the fiscyear dependent on the year inputted by user. But in order to copy every periode i had to use the offset function which has not worked. I don't know why. I want to go for your proposal so i had some questions:
- if i want to create a char. relationship with fiscyear and fiscper3 as source fields and fiscper as target field i get an error message at checking the char. relationship that tells me that it is an inconsistency and it is not possible to FISCYEAR FISCPER3
-> FISCPER. So what to do?
I created the class and write my ABAP in the derive methode but the relationship doesn't seem to work.
Do you know all the steps i have to do to derive fiscper from the other two for my copy function?
I would be very appreciate it.
Thanks and regards,
Ali

EMacs Energy Saver function won't work.

Did anyone notice the same strange thing with the Energy Saver Control Panel after the 10.4.10 update? It won't work anymore... I would like to get this thing to sleep, to save electricity... Yes, I did check the Energy Saver Control Panel/Screen saver settings and this thing suppose to go to sleep after 3 hrs but it won't. Any suggestions? Thanks!

harrytroeger,
Welcome to the Apple Discussions!
What peripherals do you have attached to the eMac? In particular, do you have a all-in-one printer/copier/scanner or stand-alone scanner attached? It's possible that the scanner driver in that case conflicts with the latest OS X version.
Is "wake for Ethernet network administrative access" checked in the Energy Saver options tab?
More generally, try resetting PRAM by restarting, then as soon as the display goes dark, press and hold down command-option-p-r keys until you hear three sets of chimes, then release the keys. You may need to go through System preferences and reset anything affected by resetting PRAM (see What's stored in PRAM?).

IPod function won't work on iPhone 4

My iPod application won't work on the iPhone 4. I can play YouTube videos, listen to previews on iTunes, but for some reason whenever I hit the play button on a song in iTunes it doesn't start on any of my songs. I've tried the lyrics app to play music, I've tried powering off and restoring it by holding home and power down and still nothing, help!

Read in another thread a solution that worked for me. Basically, you need to delete the music from the phone and re-copy from iTunes with 2 syncs. In the music tab, uncheck the boxes in the playlist, artist and genre option, removing all music from the phone, then sync. Then, re-check the desired music to copy back to the phone and sync. Music should play now from the phone.
I echo the sentiment of another poster that iOS4 really is a disaster. Problem like this should have been solved before release.

Export function won't work - help!

Running iPhoto 6 and for some reason my "export" function doesn't work anymore. I'm not sure if upload companions (shutterfly, flickr, etc.) are interfering, but suspect they are. Any have this problem before? Any suggestions on how to fix? Many thanks! Tom

Tom
In your Applications folder, select the iPhoto icon and go File -> Get Info. In the resulting Get Info pane you can manage the installed plug-ins. Turn off the third party ones and you'll be able to see if that's the issue. Then a little trial and error will find the particular one that's causing the issue.
Regards
TD

Type function won't work on trial version

Just installed trail version of Photoshop CS5 and the type function does not work?
All I can see when I selct the type tool and start to type is a constant line with no actual letters or numbers?
Can anyone help?
Many thanks

To add to Semphoric's excellent advice, make sure you're not typing white characters on a white background.
-Noel

Copy/Paste won't work between PrePro and AE

Hello,
I'm working with 720p MXF clips from an HVX200, and I'm trying to copy from Premiere into AE. It won't let me paste into AE.
I've tried using a Dynamic Link, but that makes no difference.
Thank you in advance!
Adobe Production Premium CS3
Windows Vista
Core 2 Quad 2.5GHz
4GB ram
GeForce 9800GT

A couple of things:
- If you're using Dynamic Link, you don't need to also use copy and paste. Dynamic Link is a totally separate (and usually much, much better) way of moving data between the two applications.
- As described on this page, you don't paste into the Composition panel in After Effects. You can paste from one Timeline panel to the other Timeline panel, or you can paste from one Project panel to the other.
I think that the first point is the more important one here: If you're using Dynamic Link, forget about copying and pasting between the two applications.
It seems, from your description of what you're trying to do, that you should use the first procedure on this page to replace your clip(s) with an After Effects composition in Premiere Pro and---and this is the important part---automatically create a composition in After Effects that contains the clips from Premiere Pro.

Slide function won't work

I tried to turn off my iPad yesterday and a white box circled the 'slide to turn off'. When I tried to open it, everything I touched had the white box, but no function would work. HELP!!

Try to reset your device:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

Windows 8.1 update added a recovery partition now the recovery function won't work.

After the latest 8.1 update, an extra recovery partition as added to the C: drive. A few other things got messed up so i decided to reset to factory original. To my surprise the HP Recovery Tools no longer work. If I hit F11 I get a 0xC0000225 error where the device isn't avaialble. I can see the recovery partition with the WINRE partition but I think the computer doesn't know where the partition is. I'm on an DV6-7211 with Windows 8.1 update. Anyway to tell the F11 function where the WINRE drive is? Since HP didn't seem fit to give me recovery media in my box I have no way to revert back to factory original. SInce there is a liscense for Windows 8 included, I don't feel like spending the money to buy a new operting system. Recovery media is way too expesive.

You might try making a Recovery set with the software included on your machine-though it may not work now either. Creating Recovery Media >> Windows 8
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

I updated my iPad and now copy/paste won't work anymore and I need it for an important email,Help!

Hello,since I updated my iPad air with the IOS 8.3 update, it is impossible to copy and paste anything anymore,I'd like to know if this is normal and will pass or if this has a solution,if it does I would like to know what I should do to make it work again.
thank you.

Greetings gracielikesbands,
Welcome to the Apple Support Communities!
I understand that after updating to the most resent version of iOS, you are unable to copy and paste on your iPad as described in the attached iPad User Guide (page 30).
https://manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf
To begin troubleshooting, I would suggest resetting your using the instructions located in the attached article.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
If the issue continues after resetting, please let me know what happens when you try to select text as described in the User Guide.
Cheers,
Joe

7310 copy function won't work.

Similar Messages

Maybe you are looking for