*#7370# is not working
There is virus in my Nokia asha 200's my apps when i am trying to reset it by *#7370# it switches off and then on. It only restores settings it is not deleting the virus and not cleaning all applications please help me
and my mail application is not working
What makes you think there is a Virus ?
Read THIS ..
If you want to fully format the device, try Nokia Software Recovery Tool
Similar Messages
-
N95 8GB unlokced , Vibrating alert does not work
Hi
I just bought used N95 8 GB from my friend which is locked to a network provider.
My friend took it to shop to unlock service provider (he didn't realise that service provider does it for free), now I tried to test income call vibration but it seems to me it does not work , I tried under Tool > Profile > Create new profile (vibrating on) ,,,,but still there is no vibration when I receive call!!!
I tried "Factory Settings" for the mobile but still same problem
Would unlock be the reason for that (I don't know if vibration was working before unlock) ?
Any other suggestion how to test that ?
Thanksjimmyireland wrote:
1st see if you have the latest firmware installed, if you dont have the latest update and if problem still occurs after the update try a hard reset the code is Press *#7370#
if this fails you will need to take it to a nokia care centre.
1- Yes it already has updated firmware
2- I did a hard resst without any success.
3- Would unlocking process normally create this problem ?
Message Edited by zillah on 20-Jun-2009 12:02 AM -
6120 classic:My voice commands do not work
Please help.
Don’t know if I'm just being stupid or there is something not right with my 6120c.
My voice commands do not work.
If I press the button for a voice command, it says that there are no voice tags saved.
If I go into the voice command application (Which should create the voice tags on opening), I cant playback the voice tags, its give a 'voice system error' error message.
Is there something that is not set up properly? In the voice command settings, the synthesizer is 'on'?
Also, I don’t have voice tags on my contacts??
I read somewhere that this is a firmware problem and the phone should be taken back to nokia. Is this the case?
Somebody please help.I formated my nokia n6120 using the code *#7370#. It deletes !everything! (settings, aplications...), but I have no voice sytem error now.
-
Nokia 5530 XM Touchscreen (red button) not working...
I bought my nokia 5530 for about 4 months and i had dropped it a couple of times..
But before that it did not experience any serious damage.
It was until recent i accidently dropped it AGAIN and i found out that the red button is not working anymore.
Is there any solution to fixed it??
Thanks in advance for any help..If you want to try something yourself, Dial this code as normal phone number *#7370# enter your lock code default is 12345. (BACKUP DATA FIRST)
BUT
it seems a hardware problem,and i suspect what i suggested above won't help So visit your nearest Nokia Care Point and have it checked:
http://europe.nokia.com/support/repair-and-recycle/repair/care-points
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4 -
My N70 is not working properly. Whenever I try to install new softwares, it says 'Corrupted File!'. I can't view my captured images and videos, it says 'Corrupted File!'. It even damages my music tracks. I have formatted my phone memory as well as my memory card for many times but still it isn't solved.
Solved!
Go to Solution.Hi bipul,
Have you tried Hard Format in the phone? If not, try the steps below:
Hold 3 keys; Green dial key, * Star key, no. 3 key on keypad (until you get it to work).
- Turn off PIN code requests.
- Charge the phone fully.
- Turn off the phone.
- Remove the memory card (not really needed, but I usually do it to be on the safe side).
- Put the phone on a table (easier to press the keys then, in my opinion).
- Press the three keys and keep them securely down and do not release.
- While the keys are still down, turn the power on.
- Do not release the three keys until you see the prompt for the home city.
If it doesn't work, retry until you get it right. It is easier if you have three hands.
If you can dial, try atleast these steps to reset to factory settings:
dial *#7370# after that it will ask for security code dial 12345 it's by default! make sure you back up your important detail first
Either of them should work. -
Some buttons and shortcuts are not working on my 5...
The numberpad and the contact list buttons are not working on the home page
The shortcuts disappeared on the home page, it's just 4 blank icons now
I can press the buttons, but nothing will open.....
Can somebody help please??
Many Thanks
Solved!
Go to Solution.You can force a reset by turning off your device.
Depress call+end+camera buttons while powering on. Depress keys untill youre past the nokia hand shake logo screen and get prompt for pin, language/regin selection.
This is known as the hard reset and will wipe your phonememory just as the soft reset (*#7370#). -
E71 lost icons and call register not working
Hi!
Suddenly my Nokia E71 started to work strange: all the icons in the main page disappeared, including the call notification, message received, etc., only the clock, bat and signal icons remain. Also the call register does not work: when I try to get in, goes back and doesn't even close when pushing the Exit button.
Tried changing configuration, profiles, etc with the same result. Also tried to update but Ovi shows it has the latest firmware version.
What can I do?
Andrés.Check the standby mode by going to Tools>Settings>Personalisation>Standby>Active standby and make sure that active standby is on. This should bring up the other icons on the main page.
The other problem with the call register sounds more serious. Since there is no update available, I can only suggest resetting the phone using the *#7370# code but you could lose your data so you need to backup your phone before hand. -
Video download not working after new firmware.
Updated to the latest firmware on the 5530 and I just noticed that video downloads in youtube, etc. are not working anymore. They worked fine before.
The player opens, says Loading... gets to 0% and nothing.
When I quit the app, it says, "video is not saved, do you wish to save it?"
Suggestions?Hard reset your phone *#7370# 12345 reformat, lose all data and don't install apps on your memory card.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
C7 browser not working after update to anna
c7 browser not working after update to anna.. Plz help
Hi bluz,
Welcome to the Nokia forum.
If the default browser doesn't work after updating to Anna, hard reset the device and then reinstall Anna with Nokia Suite.
Take a back up with Nokia Suite by going to Tools > Back up. When making the backup, don't tick the Settings box as this will back up the bug. Now hard reset the phone with *#7370# and default security code 12345 unless you've changed this code yourself. Once the phone has rebooted you will have an empty phone.
Now click on the green icon in Nokia Suite and reinstall the current software. Once you've done this, click on Tools > Restore to place the back up back onto your phone.
After doing the above you will be able to use the default browser again.
Let me know how you get on so that I can troubleshoot, if necessary.
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too. -
6630: Certain Keys Not Working
For some reason, my Nokia 6630 has certain keys not working. Actually, sometimes they work and sometimes they don't. I doubt it's a cover problem, because even when I take it out, the keys still don't work.
The "1", "3", "C", Left, and Up don't work at all, and it's annoying. Some help, please?The phone is too old and I think it has no FW upgrade in NSU.
I guess this could be a hardware fault. Better if you go to service point.
But before that have you tried a hard reset?*#7370#.
[It will clean up the phone memory, so better back up by PC Suit).
Care points:
UK
http://www.nokia.co.uk/A4228006
Europe:
http://europe.nokia.com/A4388379
Elsewhere:
http://www.nokia.com and select your country. -
GPS not working on Nokia C7 since Belle Update
GPS IS NOT WORKING SINCE NOKIA C7 IS UPDATED FROM ANNA TO BELLE.
ON ANNA IT WAS WORKING PERFECTLY FINE..
PLEASE GUIDE ME THE SOLUTION.Hi matemale,
If you are using just Internal GPS, could be that the location information got wiped when you did the update. In this case give the device some time to get the location, this can take relatively long time (the first time), so little patience is needed.
If you are using AGPS and Network based navigation, then do the following actions and in between them test if the device works.
Make sure the internet is on in Maps > Options (3 lines) > Settings > General > Connection > Online. Also check that the network destination is correct.
Make a back up with Nokia Suite. Type in *#7780# = soft reset, no data lost.
You can also reinstall the phone software. The process is the same as when updating with Nokia Suite, but at the end select "Reinstall".
If it's still the same, type in *#7370# = hard reset, phone memory will be wiped. Restore back up.
Hope you get the navigation working again!
Jampe
If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated. -
Nokia browser not working after update
I recently updated the nokia browser and now it's not working. When i try to use an app that uses the browser it attempts to use ovi browser but it's not compatible and it displays a message saying that the app is running but can't display. Anyone else have the same issue? And does anyone know a fix for this. Oh I forgot i'm using a Nokia Asha 303.
Hi BrokenWind,
Thank you for your post and welcome to the forums!
Try to re-install Opera Mini using Nokia Suite, please follow this link to download it. If the application still does not work, you could reset your phone by dialling *#7370# followed by your security code (the default security code is 12345, unless you have changed it). Before reset, it's a good idea to back up your phone as it will remove all data on the device.
When your device boots up, restore your backup (remember to untick settings) and re-install all your applications from "my stuff" section on Nokia Store.
Let us know if this helps,
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users! -
E51 fw 200.34.36 not working #
Hi,
I have just upgraded my e51 to 200.34.36 and i realised that # is not working properly as in fw 100.xx.xx
In the ld fw key # was used to switch to silent profile and back when the key was pressed and hold. But after the instalation the key # is not switching to silent and when i hold this key, it asks me to change the line (line 1 vs. line 2).
Why it was changed? - is it a bug or a feature? - understand - the fast switching using # is much better than pressing the power button and choosing a profile...(and the printed note on the button is missleading as well).
Can you please suggest me any solution or way how tu remap the button on user level if possible?
thanksreset your phone by pressing *#7370# in standby mode(after make a back up)
if your problem didnt solved.
it is normal for your new firmware!
NOKIA means:Night Of King In Alone -
Radio and bluetooth is not working in my nokia c5-...
Hi ...i am using nokia c5-00,before 2 day i came to know that the radio & bluetooth on my mobile is not working. When i open these the mobile get freezed. I had tried to restart the mobile as well as also tried the code *#7370# but it remain in same condition . So plz help me what to do??
hi mate, have you also ensured that you are up to date with the latest firmware for your device, and if you already are, tried re-installing the current firmware thru Nokia Suite on PC?
-
Blue tooth software not working
dear sir,
i have nokia x6 16gb
the problem is that the Blue tooth of this nokia x6 16gb not working.
please solve this issue as soon as possible.
iam un able to send or receve any deta.Do you get the message 'Unable to perform Bluetooth Operation' when you try enabling BT ? If so, many users are facing this issue on various models. What you may try is Updating / Re-installing the Firmware..If that doesn't solve the issue then Reset the phone by dialing *#7370# followed by the security code (Default is 12345 unless set by you) when prompted. Be warned that this will erase all data from the phone memory..so Back-up data first. You will need to restore after the Reset. You will also need to re-install the applications that currently are installed.. If this also doesn't solve the issue then most probably its an Hardware issue that can ONLY be resolved by Nokia Care technicians...
BTW, is the FM Radio working OK ?
Maybe you are looking for
-
Hello, first the situation and then my question. I have to implement a search help exit on knttp. I know the search help and have implemented the exit. Know i need proccesing data in the exit of the purchase. For example: I start ME22N, then i push F
-
StateFul SessionBean Passivation
I am running a EJB application in weblogic, using StateFul SessionBean.Suppose say, the maximum number of clients at a time is 100.(And assume that this is the maximum no of beans taht are created).Now 2 more clients 101,102 are coming.This time the
-
I am a NRI who is staying in UAE. My Apple ID is configured with Indian store. I don't have a credit card in India but having it in UAE. Apple store is not accepting my Debit card from India. What is the legal way to purchase or add credits with itun
-
CMDKEY script no password prompt
Here is a script I'm using to store the credentials for server shares: @echo off cd C:\Windows\System32 cmdkey /add:PrintServer /user:demo\%username% /password:%pw% Now, if I'm running the command from a prompt live, then it works just great without
-
Seeking another pair of eyes - MSI H77MA-G43 + i5 2500K
Hello everyone, I have read the CPU compatibility sticky and I think I have come to a conclusion but I wanted to run it past a larger group. I have a MSI H77MA-G43 that won't POST (sits in a power cycle "infinite loop") and I *believe* it is possible