7370 white screen

hi i got my wife a 7370 import from china via e-bay last month it has been working fine for a month then this evening all we get now is a pure white screen nothing else. it does not flash ring or anything you simply can not see anything does anybody have any idea what could be the problem and if so how to solve it because if i take it to noika repair centre ie car phone they will want the receipt e-bay etc no proof of purchase from china? help me please someone my wife is going mad

Hi,
It could be a software problem or it mite actually b a display fault. However seeing as it was bought on ebay and you have no proof of purchase you will need to pay to get anything done to it. If it only needs a software upgrade it could be about £20, but if the display has gone you are looking at about £60-£100. Hope this helps.

Similar Messages

Nokia N70 starts with a white Screen.

Hi all,
My nokia N70 starts with a white Screen and does not go any further. It does not make any sound while starting. When i connect it to the PC it is not detected by the PC while the phone is on showing a white screen. I have tried performing a Hard reset using the *3 and the green key but it is not formatting either. I also tried updating the software but as the PC is not recognising the mobile connection the updater is not working either. I am using the latest PC suite.
Please help...

Remove the battery for at least 5 minutes and then replace and see if that makes any difference. Also try removing the memory card.
If the above two don't work then try these.Always remember to backup your phone before performing resets as your data may be lost.
First try these
*#7780# - Restore factory settings - resets all the settings to the default
*#7370# - Reformat your phone
If still not working
Then try the "3 finger deep reset". With the phone powered off, depress and hold these three keys simultaneously "*" "3" "green phone" and then power on phone using the on/off button whilst keeping the three keys depressed until you hear start-up tone.
This should ONLY be done if the device doesn't power up normally anymore and it wipes everything in the Phone memory that is not part of the ROM.

E66 White Screen issue

Hello guys,
I just got an E66, but I already found my first problem. Sometimes, when the phone is on standby and I want to use it again. it gets stuck with white screen and then I have to wait like 1-5 minutes (it depends) to use it again... pretty annoying...
Hope there is any solution.

try resetting your phone, dial *#7370#. if it asks for a code, default code is 12345
Please backup your data first. Dialing above code will erase phone memory.
P.S- DON'T BACKUP SETTINGS, SETTINGS MAY CONTAIN ERRORS
Glad to help

Flash player white screen bug

Hi i recently update my n5233 firmware v.51 but i am unable to see video by flash player it comes white screen please help me

Hi Ramsoni,
Thank you for your post and welcome to the forums!
Reseting your device may help in this case. Just follow the instructions below.
Before reseting, remember to make a backup of your phone with Nokia Suite.
Dial *#7780# to soft reset your device, this will return the phone to factory settings without removing any personal data. If this does not solve the issue, hard reset your phone.
Dial *#7370# to hard reset your device. Hard reset will remove all settings and personal data off the phone, so remember to backup your data first.
When prompted for the security code, default code in both cases is 12345.
Let us know if this helps,
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

When I login to second user account I get a blank white screen.

Just updated to 10.8.3, was also having issues that seemed to be related to Spotlight and TM backups. Issues on my main user account seem to have been resolved, but I have not reactivated Spotlight or TM yet.
When I try to login to my wife's user account, it just hangs on a white screen. I've tried repairing user permissions, and also resetting PRAM and NVRAM. Disk verify checks out fine.

Library/Fonts:
[A hole bunch, removed to shorten post...]
Does the problem account also have a lot of fonts in the home folder? That could be the reason for a login failure. Otherwise see below.
Please read this whole message carefully, especially the warnings, before doing anything.
1. The changes to your configuration suggested here should be considered provisional; they may not solve your problem, or they may remove functionality that you find useful. If a third-party system modification that you want to keep is causing the problem, seek help from its developer.
2. WARNING: Back up all data now if you haven’t already done so. Before proceeding, you must be sure you can restore your system to its present state, even if it becomes unbootable. If you’re not sure you can do that, STOP — DON’T CHANGE ANYTHING. If you’re dissatisfied with the results of the procedure suggested below, restore from your backup. I will not be responsible for the consequences, and I will not be able to help, if you ignore this warning.
3. You should either remove or update the following system modification(s), if an update is available from the developer:
N/A
and definitely remove at least the following:
Logitech Control Center
† PeerGuardian
Hotspot Shield
† Conduit
4. Whatever you remove must be removed completely, and (unless otherwise specified in this message) the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job. I can't be more specific, because I don't install such things myself. Please do your own research.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
Again, please don't ask me to do this research for you. You can do it better than I can, because I haven't installed the product and I may not even know what it is.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.
5. I recommend that you never reinstall the modifications marked with a dagger (†) above, if any. If your problem is resolved after uninstalling all the above modifications and rebooting, but you still want to use some of those not marked with a dagger, you can experiment with putting them back, one at a time, testing carefully after each step. Keep in mind that system modifications may be incompatible with each other or with future OS X updates, so it may not be clear which one is at fault.
6. If you still have problems after making the suggested changes and rebooting, post again. Remember: if you don’t like the results of this procedure, you can undo it by restoring from the last backup you made before you started.
You installed the Conduit spyware. To remove it, back up all data, then follow the instructions on this page:
Help Center | Community Toolbar
If those instructions don't work, proceed as follows.
Triple-click the line below to select it:
~/Library/Application Support/Conduit
Copy the selected text to the Clipboard (command-C). From the Finder menu bar, select
Go ▹ Go to Folder…
Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
Repeat with this line:
/Applications/Toolbars
Now you're deleting a folder named "Toolbars". You may be prompted for your login password. Next, copy this line:
/Library
Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
Application Support/Conduit
InputManagers/CTLoader
LaunchAgents/com.conduit.loader.agent.plist
ScriptingAdditions/ct_scripting.osax
Close the Finder windows you opened. Log out and log back in.

My MacBook was acting weird so I restarted it and when I login a white screen flashes and goes back to the login page. Help?

My MacBook was acting weird like sometimes I would log on and I wouldn't be able to type my password for a couple seconds,but it usually logged in after that. Then I left my computer open after installing the recent update after that all my applications were not responding. So I shut it down, when I turned it back on about an hour later it went to this loading screen and then to the login like usual. After I tried logging in a white screen flashed and it went back to the login/ password screen like nothing happened. Any ideas on what happened and what I can do to fix it?

Reinstall OS X;
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Help! When I select "Phone" it tries to open and gives me a white screen and closes. I cannot view my missed calls or voicemails.

If anyone knows anything about this...
When I select "Phone" on my home screen the iPhone attempts to open it, brings up a white screen and then will shut back down. I have 8 missed calls or voicemails yesterday and I couldn't check any of them. Does this happen to anyone else?
Also, when I receive a call and I answer it does not give me the ability to end call or any of my options (sources, keypad,etc.) during the call.
Basically, I can't do anything with my contacts, favorites, missed calls or voicemails.
Can someone please help?

I have tried that multiple times. I have also made sure that I have the latest updates. Would haveing 27,000+ contacts have anything to do with it?
Sometimes it works and sometimes it doesn't

I performed the update to version 7.3.5 and now I cannot undo the update that eliminated a toolbar that I use every day. How do I recover my toolbar? With the upgrade on a windows 7 machine, whenever I open firefox I get a white screen.

Uninstall to my prior version is not working. I need to go back to the original version for two reasons. First, I can no longer use one of the toolbars that was compatible to previous version, but is no longer supported so it was disabled, and two when I try and open firefox from any short cut, I get a solid white screen and I do not get any toolbars nor is there any way to navigate to a tabbed option since I can not see anything and it just hangs there with out going to my homepage or anything else.

Do you see the menu bar or anything else? As for the missing toolbar, this is the case for 90% of Firefox users, for instance the Google Toolbar. To restore it, you need to install Mozilla's Add-On Compatibility Reporter extension from https://addons.mozilla.org/en-US/firefox/addon/15003 and restart Firefox twice.
As for the white screen, I am not sure what you mean, but your install looks corrupted, you probably need to uninstall Firefox and reinstall from scratch. You may spend too much time and effort otherwise. Back up your settings first if you have any, like Firefox bookmarks.

I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

In iTunes prefs>Store - is the Store check box unchecked?
Did you repair pemissions with Disk Utility?
MJ

In Attachement List Services for Objects White Screen when I Display a Note

Hi Expert,
Need your assistance.
I am trying to view a note in Vendor Master data but no information provided and I can only see white screen. Below are the steps that I performed:
1. Go to FK03
2. Open a Vendor
3. Click the Services for Objects
4. Attachement List
5. Select a Note
4. Display it
5. Pop up window appreared and no information occurred. Only White screen
Is there's a missing configuration, plugin, or data in my SAP system/workstation?
I tried to login to other PC and it worked.
Just wondering what is missing on my computer.
Your response will be helpful.

Hey,
I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
Have you found any solution?
Bah, this is annoying.
//Gubbar

Trying to update OS to fix White Screen problem.

Hello, I have had my Blackberry 8520 on a Virgin contract for about a year and a half now. Recently it has started randomly just changing to a black white screen that won't allow me to turn it off or perform any functions. The way I temporarily fix this is to plug it into the charger which acts like a reboot and brings it back to normal (pulling the battery to reboot it just restores the white screen after loading). In trying to find the resolve to this problem, which I haven't yet, I rang the Virgin helpline who told me to update my OS. I currently have the version 5.0 Bundle 1096 and I am trying to update it to the 5.0 Bundle 1168. I have been having increasing problems with trying to do this. I updated my desktop software for Blackberry but updating through this software always brings up the message at the install stage (after backing up my data) - "An error has occured while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." My internet is working fine and I have tried many times to update through this way. I have also tried updating through the blackberry website "web based updates area" that brings up the same message. Looking through over message boards, I tried the attempt at updating through the LOADER.EXE way. However after trying to download the OS manually to my computer, which my internet explorer thought was dangerous, it came up after with another error message - "Error 1335. The cabinet file 'Data1.cab' required for installation is corrupt and cannot be used. This could indicate a network error, an error from reading from the CD-ROM, or a problem with this package.' I am now out of ways to try and update my Blackberry and have no idea how to solve the white screen problem. Any help would be much appreciated. Karen x

Just to specify the final type of the updating I tried was following the instructions on this links - http://us.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html I choose Europe, Virgin Media, Blackberry curve 8520. I got the software on to my computer and the error message that came up, appeared after choosing language and agreeing to the terms and conditions and starting the installation. Sorry about the big clump of writing; the post removed all of my paragraphs when I posted it. New to this! And need help! Thanks x

Creative Cloud White Screen on Start-up.

When I open my Adobe CC is brings me to a white screen only and will not allow me to pass it. I have tried to delete the OBEE file, Change the name of it, and completely reinstall CC 3-4 times with no success, im just bummed that I cant update any of my programs. If anyone can offer some help/solutions regarding fixing this it would be much appreciated! *****(PS. I have included a screenshot of the issue, so you can see exactly what the issue is.

BLANK Cloud Screen http://forums.adobe.com/message/5484303
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

Adobe Windows Fireworks CS5 opens to white screen

I had Adobe Creative Suite 5 Design Premium installed and working fine for over a year. All of a sudden today when I click the icon to open Fireworks it opens to a blank screen "white".
I can see my icons for Windows 7 at the bottom but nothing but a white screen. It appears Dreamweaver is doing the same. I tried uninstalling FW and re-install and the problem
continues. Help

I checked the above article and it wasn't relevant to the problem stated at the beginning of this article, first off that person was using an iPad (there is no blue icon on the right side of the browser window on a computer) and 2nd, what is needed is preventing small images opening in full screen mode instead of the image loading in screen the same size as the image. The above article shows how to get in and out of full screen mode but that doesn't address the issue in the original post because the image is still placed on a too large screen. When the image is only 3x2 inches you don't need the page opening as large as a full size screen on a 27" monitor. When that happens you have to click on the tiny, miniscule, hardly attainable 1 pixel spot at the lower right corner of the screen and resize the page manually so it doesn't take up the whole screen so you can see the other documents. when you are opening multiple images this is very annoying.
I have trouble believing that Adobe techs haven't found a solution to this issue since Sept 2011 when the first post on this issue was posted above.

Issue when signing into adobe I get a blank white screen

what seems happening is when they log into their adobe account, it will go to a blank white screen and seem to cycle till it eventually times out and gets a connection error. However, if they type in "adobe.com" it will show them as having logged in.
This is happening on ie, and firefox and is not profile specific meaning I can log into the computer under my credentials and experience the same thing.
I've tried the usual suggestions such as renaming the OOBE folder, deleting temp files, etc.
I'm thinking it's some kind of issue with adobe flash player. Any guidance with this would be appreciated.
Thanks
Greg

Moving this discussion to the Creative Cloud Download & Install forum.
Greg please see Creative Cloud app doesn't open and hangs on spinning progress wheel - http://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html for information on how to resolve your current error.

Creative Cloud is a blank white screen, can't download any apps, how do I fix?

Hello all,
PLEASE HELP!!
I downloaded Ai as a trial version, then purchased CS6 on a 12 month.
Now I'm trying to download other apps (tried Photoshop, Flash and Premiere Pro), however when I click 'download' to try and get the other apps Creative Cloud pops up and it's a blank white screen.
Nothing happens, anthing to click NOTHING.
I've tried shutting the computer down, reinstalling Creative Cloud. Even tried downloading the above programs as trial versions (to start with) but CC just keeps popping up with a blank white screen.
How do I fix, or better still just get the apps I'm after?

Hi,
Welcome to the Community!
Rename the opm.db file.
Close the Creative Cloud application if it's running.
Navigate to the OOBE folder.
Windows: [System drive]:\Users\[username]\AppData\Local\Adobe\OOBE
Mac OS: /User/<username>/Library/Application Support/Adobe/OOBE folder
Rename the opm.db file to opm_old.db
Launch Creative Cloud
Thanks!
Ankit

7370 white screen

Similar Messages

Maybe you are looking for